[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] (v2) VT-d Posted-interrupt (PI) design for XEN
VT-d Posted-interrupt (PI) design for XEN Background ========== With the development of virtualization, there are more and more device assignment requirements. However, today when a VM is running with assigned devices (such as, NIC), external interrupt handling for the assigned devices always needs VMM intervention. VT-d Posted-interrupt is a more enhanced method to handle interrupts in the virtualization environment. Interrupt posting is the process by which an interrupt request is recorded in a memory-resident posted-interrupt-descriptor structure by the root-complex, followed by an optional notification event issued to the CPU complex. With VT-d Posted-interrupt we can get the following advantages: - Direct delivery of external interrupts to running vCPUs without VMM intervention - Decrease the interrupt migration complexity. On vCPU migration, software can atomically co-migrate all interrupts targeting the migrating vCPU. For virtual machines with assigned devices, migrating a vCPU across pCPUs either incur the overhead of forwarding interrupts in software (e.g. via VMM generated IPIS), or complexity to independently migrate each interrupt targeting the vCPU to the new pCPU. However, after enabling VT-d PI, the destination vCPU of an external interrupt from assigned devices is stored in the IRTE (i.e. Posted-interrupt Descriptor Address), when vCPU is migrated to another pCPU, we will set this new pCPU in the 'NDST' filed of Posted-interrupt descriptor, this make the interrupt migration automatic. Posted-interrupt Introduction ======================== There are two components to the Posted-interrupt architecture: Processor Support and Root-Complex Support - Processor Support Posted-interrupt processing is a feature by which a processor processes the virtual interrupts by recording them as pending on the virtual-APIC page. Posted-interrupt processing is enabled by setting the "process posted interrupts" VM-execution control. The processing is performed in response to the arrival of an interrupt with the posted-interrupt notification vector. In response to such an interrupt, the processor processes virtual interrupts recorded in a data structure called a posted-interrupt descriptor. More information about APICv and CPU-side Posted-interrupt, please refer to Chapter 29, and Section 29.6 in the Intel SDM: http://www.intel.com/content/dam/www/public/us/en/documents/manuals/64-ia-32-architectures-software-developer-manual-325462.pdf - Root-Complex Support Interrupt posting is the process by which an interrupt request (from IOAPIC or MSI/MSIx capable sources) is recorded in a memory-resident posted-interrupt-descriptor structure by the root-complex, followed by an optional notification event issued to the CPU complex. The interrupt request arriving at the root-complex carry the identity of the interrupt request source and a 'remapping-index'. The remapping-index is used to look-up an entry from the memory-resident interrupt-remap-table. Unlike with interrupt-remapping, the interrupt-remap-table-entry for a posted- interrupt, specifies a virtual-vector and a pointer to the posted-interrupt descriptor. The virtual-vector specifies the vector of the interrupt to be recorded in the posted-interrupt descriptor. The posted-interrupt descriptor hosts storage for the virtual-vectors and contains the attributes of the notification event (interrupt) to be issued to the CPU complex to inform CPU/software about pending interrupts recorded in the posted-interrupt descriptor. More information about VT-d PI, please refer to http://www.intel.com/content/www/us/en/intelligent-systems/intel-technology/vt-directed-io-spec.html Important Definitions ================== There are some changes to IRTE and posted-interrupt descriptor after VT-d PI is introduced: IRTE: Posted-interrupt Descriptor Address: the address of the posted-interrupt descriptor Virtual Vector: the guest vector of the interrupt URG: indicates if the interrupt is urgent Posted-interrupt descriptor: The Posted Interrupt Descriptor hosts the following fields: Posted Interrupt Request (PIR): Provide storage for posting (recording) interrupts (one bit per vector, for up to 256 vectors). Outstanding Notification (ON): Indicate if there is a notification event outstanding (not processed by processor or software) for this Posted Interrupt Descriptor. When this field is 0, hardware modifies it from 0 to 1 when generating a notification event, and the entity receiving the notification event (processor or software) resets it as part of posted interrupt processing. Suppress Notification (SN): Indicate if a notification event is to be suppressed (not generated) for non-urgent interrupt requests (interrupts processed through an IRTE with URG=0). Notification Vector (NV): Specify the vector for notification event (interrupt). Notification Destination (NDST): Specify the physical APIC-ID of the destination logical processor for the notification event. Design Overview ============== In this design, we will cover the following items: 1. Add a variable to control whether enable VT-d posted-interrupt or not. 2. VT-d PI feature detection. 3. Extend posted-interrupt descriptor structure to cover VT-d PI specific stuff. 4. Extend IRTE structure to support VT-d PI. 5. Introduce a new global vector which is used for waking up the blocked vCPU. 6. Update IRTE when guest modifies the interrupt configuration (MSI/MSIx configuration). 7. Update posted-interrupt descriptor during vCPU scheduling (when the state of the vCPU is transmitted among RUNSTATE_running / RUNSTATE_blocked/ RUNSTATE_runnable / RUNSTATE_offline). 8. How to wakeup blocked vCPU when an interrupt is posted for it (wakeup notification handler). 9. New boot command line for Xen, which controls VT-d PI feature by user. 10. Multicast/broadcast and lowest priority interrupts consideration. Implementation details =================== - New variable to control VT-d PI Like variable 'iommu_intremap' for interrupt remapping, it is very straightforward to add a new one 'iommu_intpost' for posted-interrupt. 'iommu_intpost' is set only when interrupt remapping and VT-d posted-interrupt are both enabled. - VT-d PI feature detection. Bit 59 in VT-d Capability Register is used to report VT-d Posted-interrupt support. - Extend posted-interrupt descriptor structure to cover VT-d PI specific stuff. Here is the new structure for posted-interrupt descriptor: struct pi_desc { DECLARE_BITMAP(pir, NR_VECTORS); union { struct { u64 on : 1, sn : 1, rsvd_1 : 13, ndm : 1, nv : 8, rsvd_2 : 8, ndst : 32; }; u64 control; }; u32 rsvd[6]; } __attribute__ ((aligned (64))); - Extend IRTE structure to support VT-d PI. Here is the new structure for IRTE: /* interrupt remap entry */ struct iremap_entry { union { u64 lo_val; struct { u64 p : 1, fpd : 1, dm : 1, rh : 1, tm : 1, dlm : 3, avail : 4, res_1 : 4, vector : 8, res_2 : 8, dst : 32; }lo; struct { u64 p : 1, fpd : 1, res_1 : 6, avail : 4, res_2 : 2, urg : 1, im : 1, vector : 8, res_3 : 14, pda_l : 26; }lo_intpost; }; union { u64 hi_val; struct { u64 sid : 16, sq : 2, svt : 2, res_1 : 44; }hi; struct { u64 sid : 16, sq : 2, svt : 2, res_1 : 12, pda_h : 32; }hi_intpost; }; }; - Introduce a new global vector which is used to wake up the blocked vCPU. Currently, there is a global vector 'posted_intr_vector', which is used as the global notification vector for all vCPUs in the system. This vector is stored in VMCS and CPU considers it as a _special_ vector, uses it to notify the related pCPU when an interrupt is recorded in the posted-interrupt descriptor. This existing global vector is a _special_ vector to CPU, CPU handle it in a _special_ way compared to normal vectors, please refer to 29.6 in Intel SDM http://www.intel.com/content/dam/www/public/us/en/documents/manuals/64-ia-32-architectures-software-developer-manual-325462.pdf for more information about how CPU handles it. After having VT-d PI, VT-d engine can issue notification event when the assigned devices issue interrupts. We need add a new global vector to wakeup the blocked vCPU, please refer to later section in this design for how to use this new global vector. - Update IRTE when guest modifies the interrupt configuration (MSI/MSIx configuration). After VT-d PI is introduced, the format of IRTE is changed as follows: Descriptor Address: the address of the posted-interrupt descriptor Virtual Vector: the guest vector of the interrupt URG: indicates if the interrupt is urgent Other fields continue to have the same meaning 'Descriptor Address' tells the destination vCPU of this interrupt, since each vCPU has a dedicated posted-interrupt descriptor. 'Virtual Vector' tells the guest vector of the interrupt. When guest changes the configuration of the interrupts, such as, the cpu affinity, or the vector, we need to update the associated IRTE accordingly. - Update posted-interrupt descriptor during vCPU scheduling The basic idea here is: 1. When vCPU's state is RUNSTATE_running, - Set 'NV' to 'posted_intr_vector'. - Clear 'SN' to accept posted-interrupts. - Set 'NDST' to the pCPU on which the vCPU will be running. 2. When vCPU's state is RUNSTATE_blocked, - Set 'NV' to ' pi_wakeup_vector ', so we can wake up the related vCPU when posted-interrupt happens for it. Please refer to the above section about the new global vector. - Clear 'SN' to accept posted-interrupts 3. When vCPU's state is RUNSTATE_runnable/RUNSTATE_offline, - Set 'SN' to suppress non-urgent interrupts (Current, we only support non-urgent interrupts) When vCPU is in RUNSTATE_runnable or RUNSTATE_offline, It is not needed to accept posted-interrupt notification event, since we don't change the behavior of scheduler when the interrupt occurs, we still need wait the next scheduling of the vCPU. When external interrupts from assigned devices occur, the interrupts are recorded in PIR, and will be synced to IRR before VM-Entry. - Set 'NV' to 'posted_intr_vector'. - How to wakeup blocked vCPU when an interrupt is posted for it (wakeup notification handler). Here is the scenario for the usage of the new global vector: 1. vCPU0 is running on pCPU0 2. vCPU0 is blocked and vCPU1 is currently running on pCPU0 3. An external interrupt from an assigned device occurs for vCPU0, if we still use 'posted_intr_vector' as the notification vector for vCPU0, the notification event for vCPU0 (the event will go to pCPU1) will be consumed by vCPU1 incorrectly (remember this is a special vector to CPU). The worst case is that vCPU0 will never be woken up again since the wakeup event for it is always consumed by other vCPUs incorrectly. So we need introduce another global vector, naming 'pi_wakeup_vector' to wake up the blocked vCPU. After using 'pi_wakeup_vector' for vCPU0, VT-d engine will issue notification event using this new vector. Since this new vector is not a SPECIAL one to CPU, it is just a normal vector. To cpu, it just receives an normal external interrupt, then we can get control in the handler of this new vector. In this case, hypervisor can do something in it, such as wakeup the blocked vCPU. Here are what we do for the blocked vCPU: 1. Define a per-cpu list 'blocked_vcpu_on_cpu', which stored the blocked vCPU on the pCPU. 2. When the vCPU's state is changed to RUNSTATE_blocked, insert the vCPU to the per-cpu list belonging to the pCPU it was running. 3. When the vCPU is unblocked, remove the vCPU from the related pCPU list. In the handler of 'pi_wakeup_vector', we do: 1. Get the physical CPU. 2. Iterate the list 'blocked_vcpu_on_cpu' of the current pCPU, if 'ON' is set, we unblock the associated vCPU. - New boot command line for Xen, which controls VT-d PI feature by user. Like 'intremap' for interrupt remapping, we add a new boot command line 'intpost' for posted-interrupts. - Multicast/broadcast and lowest priority interrupts consideration. With VT-d PI, the destination vCPU information of an external interrupt from assigned devices is stored in IRTE, this makes the following consideration of the design: 1. Multicast/broadcast interrupts cannot be posted. 2. For lowest-priority interrupts, new Intel CPU/Chipset/root-complex (starting from Nehalem) ignore TPR value, and instead supported two other ways (configurable by BIOS) on how the handle lowest priority interrupts: A) Round robin: In this method, the chipset simply delivers lowest priority interrupts in a round-robin manner across all the available logical CPUs. While this provides good load balancing, this was not the best thing to do always as interrupts from the same device (like NIC) will start running on all the CPUs thrashing caches and taking locks. This led to the next scheme. B) Vector hashing: In this method, hardware would apply a hash function on the vector value in the interrupt request, and use that hash to pick a logical CPU to route the lowest priority interrupt. This way, a given vector always goes to the same logical CPU, avoiding the thrashing problem above. So, gist of above is that, lowest priority interrupts has never been delivered as "lowest priority" in physical hardware. I will emulate vector hashing for posted-interrupt for XEN. ================================ Any comments about this design are highly appreciated! Thanks, Feng _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxx http://lists.xen.org/xen-devel
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |