|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] Fwd: Asus X99-A VT-d problems
Hi,
[ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 4.2.0-dom0 (root@xen) (gcc version 4.9.2 (Debian 4.9.2-10) ) #2 SMP Mon Sep 7 15:24:11 EEST 2015 [ 0.000000] Command line: root=/dev/sda2 ro intel_iommu=on iommu=force rootdelay=5 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers' [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 0x340 bytes, using 'standard' format. [ 0.000000] x86/fpu: Using 'eager' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b9bebfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000b9bec000-0x00000000ba760fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ba761000-0x00000000ba7aefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000ba7af000-0x00000000bc9b2fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bc9b3000-0x00000000bd077fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bd078000-0x00000000bd078fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bd079000-0x00000000bd0fefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bd0ff000-0x00000000bd317fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bd318000-0x00000000bdff8fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bdff9000-0x00000000bdffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000083fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: ASUS All Series/X99-A, BIOS 1801 05/15/2015 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x840000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-E3FFF write-through [ 0.000000] E4000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000C0000000 mask 3FFFC0000000 uncachable [ 0.000000] 1 base 380000000000 mask 3FC000000000 uncachable [ 0.000000] 2 base 0000BF000000 mask 3FFFFF000000 uncachable [ 0.000000] 3 base 0000C0000000 mask 3FFFF0000000 write-through [ 0.000000] 4 base 0000D0000000 mask 3FFFFE000000 write-through [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] e820: last_pfn = 0xbe000 max_arch_pfn = 0x400000000 [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01a04000, 0x01a04fff] PGTABLE [ 0.000000] BRK [0x01a05000, 0x01a05fff] PGTABLE [ 0.000000] BRK [0x01a06000, 0x01a06fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x83fe00000-0x83fffffff] [ 0.000000] [mem 0x83fe00000-0x83fffffff] page 1G [ 0.000000] init_memory_mapping: [mem 0x820000000-0x83fdfffff] [ 0.000000] [mem 0x820000000-0x83fdfffff] page 1G [ 0.000000] init_memory_mapping: [mem 0x00100000-0xb9bebfff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M [ 0.000000] [mem 0x40000000-0x7fffffff] page 1G [ 0.000000] [mem 0x80000000-0xb99fffff] page 2M [ 0.000000] [mem 0xb9a00000-0xb9bebfff] page 4k [ 0.000000] init_memory_mapping: [mem 0xbd078000-0xbd078fff] [ 0.000000] [mem 0xbd078000-0xbd078fff] page 4k [ 0.000000] BRK [0x01a07000, 0x01a07fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0xbd0ff000-0xbd317fff] [ 0.000000] [mem 0xbd0ff000-0xbd317fff] page 4k [ 0.000000] BRK [0x01a08000, 0x01a08fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0xbdff9000-0xbdffffff] [ 0.000000] [mem 0xbdff9000-0xbdffffff] page 4k [ 0.000000] BRK [0x01a09000, 0x01a09fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x100000000-0x81fffffff] [ 0.000000] [mem 0x100000000-0x81fffffff] page 1G [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F0540 000024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 0x00000000BA770098 0000A4 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000BA79F6E8 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 0x00000000BA7701D0 02F515 (v02 ALASKA A M I 01072009 INTL 20091013) [ 0.000000] ACPI: FACS 0x00000000BC9AFF80 000040 [ 0.000000] ACPI: APIC 0x00000000BA79F7F8 000100 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x00000000BA79F8F8 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FIDT 0x00000000BA79F940 00009C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 0x00000000BA79F9E0 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.000000] ACPI: ASF! 0x00000000BA7AE218 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240) [ 0.000000] ACPI: UEFI 0x00000000BA79FA78 000042 (v01 ALASKA A M I 01072009 00000000) [ 0.000000] ACPI: BDAT 0x00000000BA79FAC0 000030 (v01 ALASKA A M I 00000000 INTL 20091013) [ 0.000000] ACPI: HPET 0x00000000BA79FAF0 000038 (v01 ALASKA A M I 00000001 INTL 20091013) [ 0.000000] ACPI: MSCT 0x00000000BA79FB28 000090 (v01 ALASKA A M I 00000001 INTL 20091013) [ 0.000000] ACPI: PMCT 0x00000000BA79FBB8 000064 (v01 ALASKA A M I 00000000 INTL 20091013) [ 0.000000] ACPI: SLIT 0x00000000BA79FC20 00002D (v01 ALASKA A M I 00000001 INTL 20091013) [ 0.000000] ACPI: SRAT 0x00000000BA79FC50 000E58 (v03 ALASKA A M I 00000001 INTL 20091013) [ 0.000000] ACPI: WDDT 0x00000000BA7A0AA8 000040 (v01 ALASKA A M I 00000000 INTL 20091013) [ 0.000000] ACPI: SSDT 0x00000000BA7A0AE8 00D647 (v01 ALASKA PmMgt 00000001 INTL 20120913) [ 0.000000] ACPI: DMAR 0x00000000BA7AE130 0000E4 (v01 ALASKA A M I 00000001 INTL 20091013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] [ffffea0000000000-ffffea0020ffffff] PMD -> [ffff88081f600000-ffff88083f5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000083fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000b9bebfff] [ 0.000000] node 0: [mem 0x00000000bd078000-0x00000000bd078fff] [ 0.000000] node 0: [mem 0x00000000bd0ff000-0x00000000bd317fff] [ 0.000000] node 0: [mem 0x00000000bdff9000-0x00000000bdffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000083fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000083fffffff] [ 0.000000] On node 0 totalpages: 8363434 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3997 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 11833 pages used for memmap [ 0.000000] DMA32 zone: 757261 pages, LIFO batch:31 [ 0.000000] Normal zone: 118784 pages used for memmap [ 0.000000] Normal zone: 7602176 pages, LIFO batch:31 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] IOAPIC[1]: apic_id 9, version 32, address 0xfec01000, GSI 24-47 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 12 CPUs, 0 hotplug CPUs [ 0.000000] e820: [mem 0xbe000000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.000000] setup_percpu: NR_CPUS:12 nr_cpumask_bits:12 nr_cpu_ids:12 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88083fc00000 s89496 r0 d29288 u131072 [ 0.000000] pcpu-alloc: s89496 r0 d29288 u131072 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 -- -- -- -- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8232732 [ 0.000000] Kernel command line: root=/dev/sda2 ro intel_iommu=on iommu=force rootdelay=5 [ 0.000000] log_buf_len individual max cpu contribution: 4096 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 45056 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 131072 bytes [ 0.000000] early log buf free: 21780(66%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes) [ 0.000000] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 32802096K/33453736K available (5458K kernel code, 579K rwdata, 1788K rodata, 952K init, 496K bss, 651640K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000]  Additional per-CPU info printed with stalls. [ 0.000000]  Build-time adjustment of leaf fanout to 64. [ 0.000000] NR_IRQS:4352 nr_irqs:928 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 4124.943 MHz processor [ 0.000007] Calibrating delay loop (skipped), value calculated using timer frequency.. 8249.88 BogoMIPS (lpj=41249430) [ 0.000107] pid_max: default: 32768 minimum: 301 [ 0.000156] ACPI: Core revision 20150619 [ 0.016727] ACPI: All ACPI Tables successfully acquired [ 0.016864] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.016915] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.017146] Initializing cgroup subsys blkio [ 0.017195] Initializing cgroup subsys net_cls [ 0.017256] CPU: Physical Processor ID: 0 [ 0.017303] CPU: Processor Core ID: 0 [ 0.017944] mce: CPU supports 22 MCE banks [ 0.018014] CPU0: Thermal monitoring enabled (TM1) [ 0.018078] process: using mwait in idle threads [ 0.018127] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.018177] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.018330] Freeing SMP alternatives memory: 28K (ffffffff81980000 - ffffffff81987000) [ 0.019659] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.019751] Switched APIC routing to physical flat. [ 0.020254] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.120212] TSC deadline timer enabled [ 0.120214] smpboot: CPU0: Intel(R) Core(TM) i7-5820K CPU @ 3.30GHz (fam: 06, model: 3f, stepping: 02) [ 0.120396] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver. [ 0.120649] ... version: 3 [ 0.120696] ... bit width: 48 [ 0.120744] ... generic registers: 4 [ 0.120791] ... value mask: 0000ffffffffffff [ 0.120840] ... max period: 0000ffffffffffff [ 0.120888] ... fixed-purpose events: 3 [ 0.120936] ... event mask: 000000070000000f [ 0.121114] x86: Booting SMP configuration: [ 0.121163] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 [ 0.163978] x86: Booted up 1 node, 12 CPUs [ 0.164073] smpboot: Total of 12 processors activated (98998.63 BogoMIPS) [ 0.176065] devtmpfs: initialized [ 0.178517] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.178618] xor: automatically using best checksumming function: [ 0.275811] avx : 57688.800 MB/sec [ 0.275926] NET: Registered protocol family 16 [ 0.335773] cpuidle: using governor ladder [ 0.335972] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.336035] ACPI: bus type PCI registered [ 0.336118] dca service started, version 1.12.1 [ 0.336176] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.338440] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.338498] PCI: Using configuration type 1 for base access [ 0.338735] perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.505614] raid6: sse2x1 gen() 12854 MB/s [ 0.675456] raid6: sse2x1 xor() 9659 MB/s [ 0.845297] raid6: sse2x2 gen() 16592 MB/s [ 1.015137] raid6: sse2x2 xor() 11160 MB/s [ 1.184976] raid6: sse2x4 gen() 19686 MB/s [ 1.354817] raid6: sse2x4 xor() 13471 MB/s [ 1.524659] raid6: avx2x1 gen() 25316 MB/s [ 1.694501] raid6: avx2x2 gen() 29844 MB/s [ 1.864342] raid6: avx2x4 gen() 35357 MB/s [ 1.864390] raid6: using algorithm avx2x4 gen() 35357 MB/s [ 1.864439] raid6: using avx2x2 recovery algorithm [ 1.864514] ACPI: Added _OSI(Module Device) [ 1.864563] ACPI: Added _OSI(Processor Device) [ 1.864610] ACPI: Added _OSI(3.0 _SCP Extensions) [ 1.864658] ACPI: Added _OSI(Processor Aggregator Device) [ 1.874954] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 1.876370] ACPI: Interpreter enabled [ 1.876421] ACPI: (supports S0 S5) [ 1.876467] ACPI: Using IOAPIC for interrupt routing [ 1.876532] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.888779] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 1.888831] acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 3.902641] acpi PNP0A03:03: _OSC: platform does not support [PCIeHotplug] [ 5.920903] acpi PNP0A03:03: _OSC: OS now controls [PME AER PCIeCapability] [ 5.920966] acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration [ 5.921035] PCI host bridge to bus 0000:ff [ 5.921084] pci_bus 0000:ff: root bus resource [bus ff] [ 5.921138] pci 0000:ff:0b.0: [8086:2f81] type 00 class 0x088000 [ 5.921167] pci 0000:ff:0b.1: [8086:2f36] type 00 class 0x110100 [ 5.921190] pci 0000:ff:0b.2: [8086:2f37] type 00 class 0x110100 [ 5.921214] pci 0000:ff:0c.0: [8086:2fe0] type 00 class 0x088000 [ 5.921236] pci 0000:ff:0c.1: [8086:2fe1] type 00 class 0x088000 [ 5.921259] pci 0000:ff:0c.2: [8086:2fe2] type 00 class 0x088000 [ 5.921281] pci 0000:ff:0c.3: [8086:2fe3] type 00 class 0x088000 [ 5.921303] pci 0000:ff:0c.4: [8086:2fe4] type 00 class 0x088000 [ 5.921325] pci 0000:ff:0c.5: [8086:2fe5] type 00 class 0x088000 [ 5.921349] pci 0000:ff:0f.0: [8086:2ff8] type 00 class 0x088000 [ 5.921371] pci 0000:ff:0f.1: [8086:2ff9] type 00 class 0x088000 [ 5.921394] pci 0000:ff:0f.4: [8086:2ffc] type 00 class 0x088000 [ 5.921416] pci 0000:ff:0f.5: [8086:2ffd] type 00 class 0x088000 [ 5.921439] pci 0000:ff:0f.6: [8086:2ffe] type 00 class 0x088000 [ 5.921461] pci 0000:ff:10.0: [8086:2f1d] type 00 class 0x088000 [ 5.921484] pci 0000:ff:10.1: [8086:2f34] type 00 class 0x110100 [ 5.921507] pci 0000:ff:10.5: [8086:2f1e] type 00 class 0x088000 [ 5.921529] pci 0000:ff:10.6: [8086:2f7d] type 00 class 0x110100 [ 5.921551] pci 0000:ff:10.7: [8086:2f1f] type 00 class 0x088000 [ 5.921573] pci 0000:ff:12.0: [8086:2fa0] type 00 class 0x088000 [ 5.921596] pci 0000:ff:12.1: [8086:2f30] type 00 class 0x110100 [ 5.921622] pci 0000:ff:13.0: [8086:2fa8] type 00 class 0x088000 [ 5.921648] pci 0000:ff:13.1: [8086:2f71] type 00 class 0x088000 [ 5.921673] pci 0000:ff:13.2: [8086:2faa] type 00 class 0x088000 [ 5.921699] pci 0000:ff:13.3: [8086:2fab] type 00 class 0x088000 [ 5.921724] pci 0000:ff:13.4: [8086:2fac] type 00 class 0x088000 [ 5.921750] pci 0000:ff:13.5: [8086:2fad] type 00 class 0x088000 [ 5.921775] pci 0000:ff:13.6: [8086:2fae] type 00 class 0x088000 [ 5.921799] pci 0000:ff:13.7: [8086:2faf] type 00 class 0x088000 [ 5.921823] pci 0000:ff:14.0: [8086:2fb0] type 00 class 0x088000 [ 5.921849] pci 0000:ff:14.1: [8086:2fb1] type 00 class 0x088000 [ 5.921875] pci 0000:ff:14.2: [8086:2fb2] type 00 class 0x088000 [ 5.921900] pci 0000:ff:14.3: [8086:2fb3] type 00 class 0x088000 [ 5.921926] pci 0000:ff:14.6: [8086:2fbe] type 00 class 0x088000 [ 5.921950] pci 0000:ff:14.7: [8086:2fbf] type 00 class 0x088000 [ 5.921976] pci 0000:ff:15.0: [8086:2fb4] type 00 class 0x088000 [ 5.922001] pci 0000:ff:15.1: [8086:2fb5] type 00 class 0x088000 [ 5.922026] pci 0000:ff:15.2: [8086:2fb6] type 00 class 0x088000 [ 5.922052] pci 0000:ff:15.3: [8086:2fb7] type 00 class 0x088000 [ 5.922080] pci 0000:ff:16.0: [8086:2f68] type 00 class 0x088000 [ 5.922105] pci 0000:ff:16.6: [8086:2f6e] type 00 class 0x088000 [ 5.922130] pci 0000:ff:16.7: [8086:2f6f] type 00 class 0x088000 [ 5.922154] pci 0000:ff:17.0: [8086:2fd0] type 00 class 0x088000 [ 5.922179] pci 0000:ff:17.4: [8086:2fb8] type 00 class 0x088000 [ 5.922203] pci 0000:ff:17.5: [8086:2fb9] type 00 class 0x088000 [ 5.922227] pci 0000:ff:17.6: [8086:2fba] type 00 class 0x088000 [ 5.922252] pci 0000:ff:17.7: [8086:2fbb] type 00 class 0x088000 [ 5.922278] pci 0000:ff:1e.0: [8086:2f98] type 00 class 0x088000 [ 5.922302] pci 0000:ff:1e.1: [8086:2f99] type 00 class 0x088000 [ 5.922325] pci 0000:ff:1e.2: [8086:2f9a] type 00 class 0x088000 [ 5.922349] pci 0000:ff:1e.3: [8086:2fc0] type 00 class 0x088000 [ 5.922351] pci 0000:ff:1e.3: [Firmware Bug]: reg 0x10: invalid BAR (can't size) [ 5.922423] pci 0000:ff:1e.4: [8086:2f9c] type 00 class 0x088000 [ 5.922448] pci 0000:ff:1f.0: [8086:2f88] type 00 class 0x088000 [ 5.922472] pci 0000:ff:1f.2: [8086:2f8a] type 00 class 0x088000 [ 5.922497] pci_bus 0000:ff: on NUMA node 0 [ 5.923006] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 5.923058] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 5.923182] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug] [ 5.923298] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability] [ 5.923349] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 5.923532] PCI host bridge to bus 0000:00 [ 5.923581] pci_bus 0000:00: root bus resource [bus 00-fe] [ 5.923630] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 5.923681] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 5.923731] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 5.923782] pci_bus 0000:00: root bus resource [io 0x1000-0xffff window] [ 5.923832] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 5.923883] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfbffbfff window] [ 5.923938] pci 0000:00:00.0: [8086:2f00] type 00 class 0x060000 [ 5.924006] pci 0000:00:01.0: [8086:2f02] type 01 class 0x060400 [ 5.924034] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 5.924071] pci 0000:00:01.0: System wakeup disabled by ACPI [ 5.924139] pci 0000:00:01.1: [8086:2f03] type 01 class 0x060400 [ 5.924166] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 5.924195] pci 0000:00:01.1: System wakeup disabled by ACPI [ 5.924264] pci 0000:00:02.0: [8086:2f04] type 01 class 0x060400 [ 5.924291] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 5.924326] pci 0000:00:02.0: System wakeup disabled by ACPI [ 5.924393] pci 0000:00:02.2: [8086:2f06] type 01 class 0x060400 [ 5.924420] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold [ 5.924448] pci 0000:00:02.2: System wakeup disabled by ACPI [ 5.924516] pci 0000:00:03.0: [8086:2f08] type 01 class 0x060400 [ 5.924542] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 5.924577] pci 0000:00:03.0: System wakeup disabled by ACPI [ 5.924644] pci 0000:00:05.0: [8086:2f28] type 00 class 0x088000 [ 5.924700] pci 0000:00:05.1: [8086:2f29] type 00 class 0x088000 [ 5.924764] pci 0000:00:05.2: [8086:2f2a] type 00 class 0x088000 [ 5.924820] pci 0000:00:05.4: [8086:2f2c] type 00 class 0x080020 [ 5.924827] pci 0000:00:05.4: reg 0x10: [mem 0xfb238000-0xfb238fff] [ 5.924893] pci 0000:00:11.0: [8086:8d7c] type 00 class 0xff0000 [ 5.925011] pci 0000:00:14.0: [8086:8d31] type 00 class 0x0c0330 [ 5.925027] pci 0000:00:14.0: reg 0x10: [mem 0xfb220000-0xfb22ffff 64bit] [ 5.925062] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 5.925094] pci 0000:00:14.0: System wakeup disabled by ACPI [ 5.925164] pci 0000:00:16.0: [8086:8d3a] type 00 class 0x078000 [ 5.925185] pci 0000:00:16.0: reg 0x10: [mem 0xfb237000-0xfb23700f 64bit] [ 5.925223] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 5.925275] pci 0000:00:19.0: [8086:15a1] type 00 class 0x020000 [ 5.925293] pci 0000:00:19.0: reg 0x10: [mem 0xfb200000-0xfb21ffff] [ 5.925299] pci 0000:00:19.0: reg 0x14: [mem 0xfb234000-0xfb234fff] [ 5.925304] pci 0000:00:19.0: reg 0x18: [io 0xf020-0xf03f] [ 5.925337] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 5.925364] pci 0000:00:19.0: System wakeup disabled by ACPI [ 5.925434] pci 0000:00:1c.0: [8086:8d10] type 01 class 0x060400 [ 5.925478] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 5.925508] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 5.925578] pci 0000:00:1c.4: [8086:8d18] type 01 class 0x060400 [ 5.925623] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 5.925652] pci 0000:00:1c.4: System wakeup disabled by ACPI [ 5.925724] pci 0000:00:1d.0: [8086:8d26] type 00 class 0x0c0320 [ 5.925746] pci 0000:00:1d.0: reg 0x10: [mem 0xfb233000-0xfb2333ff] [ 5.925799] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 5.925834] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 5.925905] pci 0000:00:1f.0: [8086:8d47] type 00 class 0x060100 [ 5.926027] pci 0000:00:1f.2: [8086:8d02] type 00 class 0x010601 [ 5.926043] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077] [ 5.926048] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063] [ 5.926053] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057] [ 5.926058] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043] [ 5.926063] pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf01f] [ 5.926068] pci 0000:00:1f.2: reg 0x24: [mem 0xfb232000-0xfb2327ff] [ 5.926084] pci 0000:00:1f.2: PME# supported from D3hot [ 5.926127] pci 0000:00:1f.3: [8086:8d22] type 00 class 0x0c0500 [ 5.926139] pci 0000:00:1f.3: reg 0x10: [mem 0xfb231000-0xfb2310ff 64bit] [ 5.926154] pci 0000:00:1f.3: reg 0x20: [io 0x0580-0x059f] [ 5.926222] pci 0000:00:01.0: PCI bridge to [bus 04] [ 5.926290] pci 0000:00:01.1: PCI bridge to [bus 05] [ 5.926357] pci 0000:00:02.0: PCI bridge to [bus 03] [ 5.926424] pci 0000:00:02.2: PCI bridge to [bus 02] [ 5.926498] pci 0000:01:00.0: [10de:0a65] type 00 class 0x030000 [ 5.926510] pci 0000:01:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff] [ 5.926516] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref] [ 5.926522] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref] [ 5.926526] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f] [ 5.926531] pci 0000:01:00.0: reg 0x30: [mem 0xfb000000-0xfb07ffff pref] [ 5.926578] pci 0000:01:00.1: [10de:0be3] type 00 class 0x040300 [ 5.926590] pci 0000:01:00.1: reg 0x10: [mem 0xfb080000-0xfb083fff] [ 5.940859] pci 0000:00:03.0: PCI bridge to [bus 01] [ 5.940914] pci 0000:00:03.0: bridge window [io 0xe000-0xefff] [ 5.940917] pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 5.940921] pci 0000:00:03.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref] [ 5.940967] pci 0000:00:1c.0: PCI bridge to [bus 06] [ 5.941089] pci 0000:07:00.0: [1b21:1142] type 00 class 0x0c0330 [ 5.941136] pci 0000:07:00.0: reg 0x10: [mem 0xfb100000-0xfb107fff 64bit] [ 5.941250] pci 0000:07:00.0: PME# supported from D3cold [ 5.960843] pci 0000:00:1c.4: PCI bridge to [bus 07] [ 5.960906] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 5.960932] pci_bus 0000:00: on NUMA node 0 [ 5.961251] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 5.961760] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 5.962266] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 10 11 12 14 15) [ 5.962736] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 5.963280] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 5.963786] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 5.964292] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 5.964871] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 *15) [ 5.965397] ACPI: Enabled 2 GPEs in block 00 to 3F [ 5.965594] vgaarb: setting as boot device: PCI:0000:01:00.0 [ 5.965644] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 5.965695] vgaarb: loaded [ 5.965742] vgaarb: bridge control possible 0000:01:00.0 [ 5.965842] SCSI subsystem initialized [ 5.965914] libata version 3.00 loaded. [ 5.965915] ACPI: bus type USB registered [ 5.965971] usbcore: registered new interface driver usbfs [ 5.966024] usbcore: registered new interface driver hub [ 5.966089] usbcore: registered new device driver usb [ 5.966155] pps_core: LinuxPPS API ver. 1 registered [ 5.966204] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@xxxxxxxx> [ 5.966268] PTP clock support registered [ 5.966345] PCI: Using ACPI for IRQ routing [ 5.971087] PCI: pci_cache_line_size set to 64 bytes [ 5.971143] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff] [ 5.971144] e820: reserve RAM buffer [mem 0xb9bec000-0xbbffffff] [ 5.971145] e820: reserve RAM buffer [mem 0xbd079000-0xbfffffff] [ 5.971145] e820: reserve RAM buffer [mem 0xbd318000-0xbfffffff] [ 5.971146] e820: reserve RAM buffer [mem 0xbe000000-0xbfffffff] [ 5.971249] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 5.971626] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 5.973690] clocksource: Switched to clocksource hpet [ 5.973804] pnp: PnP ACPI init [ 5.973946] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 5.973989] system 00:01: [io 0x0500-0x057f] has been reserved [ 5.974040] system 00:01: [io 0x0400-0x047f] could not be reserved [ 5.974090] system 00:01: [io 0x0580-0x059f] has been reserved [ 5.974140] system 00:01: [io 0x0600-0x061f] has been reserved [ 5.974189] system 00:01: [io 0x0880-0x0883] has been reserved [ 5.974239] system 00:01: [io 0x0800-0x081f] has been reserved [ 5.974289] system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved [ 5.974340] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved [ 5.974391] system 00:01: [mem 0xff000000-0xffffffff] has been reserved [ 5.974441] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved [ 5.974492] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved [ 5.974542] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved [ 5.974593] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved [ 5.974644] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 5.974698] system 00:02: [io 0x0290-0x029f] has been reserved [ 5.974748] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 5.975027] pnp: PnP ACPI: found 3 devices [ 5.975941] pci 0000:00:01.0: PCI bridge to [bus 04] [ 5.975994] pci 0000:00:01.1: PCI bridge to [bus 05] [ 5.976045] pci 0000:00:02.0: PCI bridge to [bus 03] [ 5.976096] pci 0000:00:02.2: PCI bridge to [bus 02] [ 5.976148] pci 0000:00:03.0: PCI bridge to [bus 01] [ 5.976197] pci 0000:00:03.0: bridge window [io 0xe000-0xefff] [ 5.976248] pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 5.976299] pci 0000:00:03.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref] [ 5.976352] pci 0000:00:1c.0: PCI bridge to [bus 06] [ 5.976406] pci 0000:00:1c.4: PCI bridge to [bus 07] [ 5.976456] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 5.976511] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 5.976512] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 5.976513] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 5.976513] pci_bus 0000:00: resource 7 [io 0x1000-0xffff window] [ 5.976514] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window] [ 5.976515] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xfbffbfff window] [ 5.976516] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 5.976516] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfb0fffff] [ 5.976517] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref] [ 5.976518] pci_bus 0000:07: resource 1 [mem 0xfb100000-0xfb1fffff] [ 5.976535] NET: Registered protocol family 2 [ 5.976666] TCP established hash table entries: 262144 (order: 9, 2097152 bytes) [ 5.976887] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 5.977023] TCP: Hash tables configured (established 262144 bind 65536) [ 5.977086] UDP hash table entries: 16384 (order: 7, 524288 bytes) [ 5.977181] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes) [ 5.977298] NET: Registered protocol family 1 [ 5.977381] RPC: Registered named UNIX socket transport module. [ 5.977431] RPC: Registered udp transport module. [ 5.977479] RPC: Registered tcp transport module. [ 5.977526] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 5.993785] pci 0000:01:00.0: Video device with shadowed ROM [ 5.993931] PCI: CLS 32 bytes, default 64 [ 5.993957] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 5.994013] software IO TLB [mem 0xb5bec000-0xb9bec000] (64MB) mapped at [ffff8800b5bec000-ffff8800b9bebfff] [ 5.994138] RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 655360 ms ovfl timer [ 5.994199] hw unit of domain pp0-core 2^-14 Joules [ 5.994247] hw unit of domain package 2^-14 Joules [ 5.994295] hw unit of domain dram 2^-16 Joules [ 5.994346] Intel CQM monitoring enabled [ 5.994508] microcode: CPU0 sig=0x306f2, pf=0x4, revision=0x2d [ 5.994559] microcode: CPU1 sig=0x306f2, pf=0x4, revision=0x2d [ 5.994611] microcode: CPU2 sig=0x306f2, pf=0x4, revision=0x2d [ 5.994664] microcode: CPU3 sig=0x306f2, pf=0x4, revision=0x2d [ 5.994716] microcode: CPU4 sig=0x306f2, pf=0x4, revision=0x2d [ 5.994769] microcode: CPU5 sig=0x306f2, pf=0x4, revision=0x2d [ 5.994821] microcode: CPU6 sig=0x306f2, pf=0x4, revision=0x2d [ 5.994874] microcode: CPU7 sig=0x306f2, pf=0x4, revision=0x2d [ 5.994926] microcode: CPU8 sig=0x306f2, pf=0x4, revision=0x2d [ 5.994978] microcode: CPU9 sig=0x306f2, pf=0x4, revision=0x2d [ 5.995030] microcode: CPU10 sig=0x306f2, pf=0x4, revision=0x2d [ 5.995082] microcode: CPU11 sig=0x306f2, pf=0x4, revision=0x2d [ 5.995153] microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba [ 5.995636] futex hash table entries: 4096 (order: 6, 262144 bytes) [ 5.996946] NFS: Registering the id_resolver key type [ 5.996998] Key type id_resolver registered [ 5.997045] Key type id_legacy registered [ 5.997095] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 5.997149] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 5.997201] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx). [ 5.997282] ntfs: driver 2.1.32 [Flags: R/O]. [ 5.997368] fuse init (API version 7.23) [ 5.997796] async_tx: api initialized (async) [ 5.997860] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 5.997913] io scheduler noop registered [ 5.997974] io scheduler cfq registered (default) [ 5.998511] aer 0000:00:01.0:pcie02: service driver aer loaded [ 5.998523] aer 0000:00:01.1:pcie02: service driver aer loaded [ 5.998534] aer 0000:00:02.0:pcie02: service driver aer loaded [ 5.998545] aer 0000:00:02.2:pcie02: service driver aer loaded [ 5.998556] aer 0000:00:03.0:pcie02: service driver aer loaded [ 5.998575] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 5.998627] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded [ 5.998630] pcieport 0000:00:01.1: Signaling PME through PCIe PME interrupt [ 5.998682] pcie_pme 0000:00:01.1:pcie01: service driver pcie_pme loaded [ 5.998685] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt [ 5.998736] pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded [ 5.998739] pcieport 0000:00:02.2: Signaling PME through PCIe PME interrupt [ 5.998790] pcie_pme 0000:00:02.2:pcie01: service driver pcie_pme loaded [ 5.998793] pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt [ 5.998843] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 5.998893] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt [ 5.998944] pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded [ 5.998955] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 5.999007] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded [ 5.999018] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt [ 5.999069] pci 0000:07:00.0: Signaling PME through PCIe PME interrupt [ 5.999120] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded [ 5.999132] intel_idle: MWAIT substates: 0x2120 [ 5.999133] intel_idle: v0.4 model 0x3F [ 5.999133] intel_idle: lapic_timer_reliable_states 0xffffffff [ 5.999971] ioatdma: Intel(R) QuickData Technology Driver 4.00 [ 6.000046] xenfs: not registering filesystem on non-xen platform [ 6.001060] loop: module loaded [ 6.001134] isci: Intel(R) C600 SAS Controller Driver - version 1.2.0 [ 6.001196] GDT-HA: Storage RAID Controller Driver. Version: 3.05 [ 6.001287] ahci 0000:00:1f.2: version 3.0 [ 6.001377] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 6.001431] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst [ 6.103863] scsi host0: ahci [ 6.106180] scsi host1: ahci [ 6.106266] scsi host2: ahci [ 6.106350] scsi host3: ahci [ 6.106434] scsi host4: ahci [ 6.106517] scsi host5: ahci [ 6.106582] ata1: SATA max UDMA/133 abar m2048@0xfb232000 port 0xfb232100 irq 34 [ 6.106634] ata2: SATA max UDMA/133 abar m2048@0xfb232000 port 0xfb232180 irq 34 [ 6.106686] ata3: SATA max UDMA/133 abar m2048@0xfb232000 port 0xfb232200 irq 34 [ 6.106737] ata4: SATA max UDMA/133 abar m2048@0xfb232000 port 0xfb232280 irq 34 [ 6.106788] ata5: SATA max UDMA/133 abar m2048@0xfb232000 port 0xfb232300 irq 34 [ 6.106840] ata6: SATA max UDMA/133 abar m2048@0xfb232000 port 0xfb232380 irq 34 [ 6.106948] tun: Universal TUN/TAP device driver, 1.6 [ 6.107003] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx> [ 6.107074] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.5-k [ 6.107124] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 6.107244] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 6.281958] e1000e 0000:00:19.0 eth0: registered PHC clock [ 6.282009] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 30:5a:3a:53:63:e6 [ 6.282060] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 6.282133] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF [ 6.282191] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.2.18-k [ 6.282241] igb: Copyright (c) 2007-2014 Intel Corporation. [ 6.282354] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 6.282406] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 6.282518] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810 [ 6.282576] xhci_hcd 0000:00:14.0: cache line size of 32 is not supported [ 6.282720] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 6.282771] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.282823] usb usb1: Product: xHCI Host Controller [ 6.282871] usb usb1: Manufacturer: Linux 4.2.0-dom0 xhci-hcd [ 6.282920] usb usb1: SerialNumber: 0000:00:14.0 [ 6.283061] hub 1-0:1.0: USB hub found [ 6.283127] hub 1-0:1.0: 15 ports detected [ 6.284349] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 6.284400] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 6.284494] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 6.284546] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.284597] usb usb2: Product: xHCI Host Controller [ 6.284646] usb usb2: Manufacturer: Linux 4.2.0-dom0 xhci-hcd [ 6.284695] usb usb2: SerialNumber: 0000:00:14.0 [ 6.284815] hub 2-0:1.0: USB hub found [ 6.284875] hub 2-0:1.0: 6 ports detected [ 6.285480] xhci_hcd 0000:07:00.0: xHCI Host Controller [ 6.285532] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 3 [ 6.345895] xhci_hcd 0000:07:00.0: hcc params 0x0200e081 hci version 0x100 quirks 0x00000010 [ 6.346147] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 6.346199] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.346250] usb usb3: Product: xHCI Host Controller [ 6.346298] usb usb3: Manufacturer: Linux 4.2.0-dom0 xhci-hcd [ 6.346348] usb usb3: SerialNumber: 0000:07:00.0 [ 6.346475] hub 3-0:1.0: USB hub found [ 6.346532] hub 3-0:1.0: 2 ports detected [ 6.346670] xhci_hcd 0000:07:00.0: xHCI Host Controller [ 6.346721] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 4 [ 6.346853] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 6.346961] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 6.347012] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.347063] usb usb4: Product: xHCI Host Controller [ 6.347112] usb usb4: Manufacturer: Linux 4.2.0-dom0 xhci-hcd [ 6.347161] usb usb4: SerialNumber: 0000:07:00.0 [ 6.347278] hub 4-0:1.0: USB hub found [ 6.347336] hub 4-0:1.0: 2 ports detected [ 6.347491] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 6.347543] ehci-pci: EHCI PCI platform driver [ 6.347647] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 6.347698] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 6.347756] ehci-pci 0000:00:1d.0: debug port 2 [ 6.351692] ehci-pci 0000:00:1d.0: cache line size of 32 is not supported [ 6.351697] ehci-pci 0000:00:1d.0: irq 21, io mem 0xfb233000 [ 6.373340] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 6.373478] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 [ 6.373536] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.373591] usb usb5: Product: EHCI Host Controller [ 6.373643] usb usb5: Manufacturer: Linux 4.2.0-dom0 ehci_hcd [ 6.373704] usb usb5: SerialNumber: 0000:00:1d.0 [ 6.373829] hub 5-0:1.0: USB hub found [ 6.373896] hub 5-0:1.0: 2 ports detected [ 6.374062] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 6.374114] ohci-pci: OHCI PCI platform driver [ 6.374170] ohci-platform: OHCI generic platform driver [ 6.374224] uhci_hcd: USB Universal Host Controller Interface driver [ 6.374289] usbcore: registered new interface driver uas [ 6.374351] usbcore: registered new interface driver usb-storage [ 6.374512] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 6.376951] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 6.377003] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 6.377124] mousedev: PS/2 mouse device common for all mice [ 6.377196] rtc_cmos 00:00: RTC can wake from S4 [ 6.377347] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0 [ 6.377416] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 6.377512] md: linear personality registered for level -1 [ 6.377562] md: raid0 personality registered for level 0 [ 6.377612] md: raid1 personality registered for level 1 [ 6.377661] md: raid10 personality registered for level 10 [ 6.377741] md: raid6 personality registered for level 6 [ 6.377790] md: raid5 personality registered for level 5 [ 6.377839] md: raid4 personality registered for level 4 [ 6.377889] md: multipath personality registered for level -4 [ 6.377938] md: faulty personality registered for level -5 [ 6.378017] device-mapper: uevent: version 1.0.3 [ 6.378104] device-mapper: ioctl: 4.32.0-ioctl (2015-6-26) initialised: dm-devel@xxxxxxxxxx [ 6.378187] device-mapper: raid: Loading target version 1.7.0 [ 6.378239] Intel P-state driver initializing. [ 6.378430] hidraw: raw HID events driver (C) Jiri Kosina [ 6.378543] usbcore: registered new interface driver usbhid [ 6.378593] usbhid: USB HID core driver [ 6.378656] Netfilter messages via NETLINK v0.30. [ 6.378706] nfnl_acct: registering with nfnetlink. [ 6.378779] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 6.379089] ctnetlink v0.93: registering with nfnetlink. [ 6.379250] nf_tables: (c) 2007-2009 Patrick McHardy <kaber@xxxxxxxxx> [ 6.379306] nf_tables_compat: (c) 2012 Pablo Neira Ayuso <pablo@xxxxxxxxxxxxx> [ 6.379578] xt_time: kernel timezone is -0000 [ 6.380163] ip_tables: (C) 2000-2006 Netfilter Core Team [ 6.380332] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully [ 6.380405] arp_tables: (C) 2002 David S. Miller [ 6.380520] Initializing XFRM netlink socket [ 6.380575] NET: Registered protocol family 17 [ 6.380632] NET: Registered protocol family 15 [ 6.380691] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 6.380770] 8021q: 802.1Q VLAN Support v1.8 [ 6.380829] Key type dns_resolver registered [ 6.381605] registered taskstats version 1 [ 6.382210] rtc_cmos 00:00: setting system clock to 2015-09-08 12:12:26 UTC (1441714346) [ 6.382376] Waiting 5 sec before mounting root device... [ 6.443304] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 6.445285] ata2.00: supports DRM functions and may not be fully accessible [ 6.445407] ata2.00: disabling queued TRIM support [ 6.445408] ata2.00: ATA-9: Samsung SSD 850 PRO 512GB, EXM02B6Q, max UDMA/133 [ 6.445460] ata2.00: 1000215216 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 6.445698] ata2.00: supports DRM functions and may not be fully accessible [ 6.445813] ata2.00: disabling queued TRIM support [ 6.445863] ata2.00: configured for UDMA/133 [ 6.453295] ata6: SATA link down (SStatus 0 SControl 300) [ 6.453359] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 6.453908] ata4.00: ATA-9: WDC WD20EFRX-68EUZN0, 82.00A82, max UDMA/133 [ 6.453960] ata4.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 6.454549] ata4.00: configured for UDMA/133 [ 6.463278] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 6.463349] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 6.465207] ata3.00: supports DRM functions and may not be fully accessible [ 6.465317] ata3.00: disabling queued TRIM support [ 6.465318] ata3.00: ATA-9: Samsung SSD 850 PRO 512GB, EXM02B6Q, max UDMA/133 [ 6.465370] ata3.00: 1000215216 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 6.465599] ata3.00: supports DRM functions and may not be fully accessible [ 6.465706] ata3.00: disabling queued TRIM support [ 6.465772] ata3.00: configured for UDMA/133 [ 6.473269] ata5: SATA link down (SStatus 0 SControl 300) [ 6.486540] ata1.00: ATA-8: KINGSTON SV300S37A120G, 603ABBF0, max UDMA/133 [ 6.486598] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 6.492009] ata1.00: configured for UDMA/133 [ 6.492175] scsi 0:0:0:0: Direct-Access ATA KINGSTON SV300S3 BBF0 PQ: 0 ANSI: 5 [ 6.492371] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 6.492372] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB) [ 6.492444] sd 0:0:0:0: [sda] Write Protect is off [ 6.492445] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 6.492459] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.492640] scsi 1:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5 [ 6.492705] sda: sda1 sda2 [ 6.492775] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 6.492776] sd 1:0:0:0: [sdb] 1000215216 512-byte logical blocks: (512 GB/476 GiB) [ 6.492844] sd 1:0:0:0: [sdb] Write Protect is off [ 6.492845] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 6.492860] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.492921] sd 0:0:0:0: [sda] Attached SCSI disk [ 6.493082] sdb: sdb1 [ 6.493089] scsi 2:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5 [ 6.493167] sd 2:0:0:0: [sdc] 1000215216 512-byte logical blocks: (512 GB/476 GiB) [ 6.493171] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 6.493275] sd 2:0:0:0: [sdc] Write Protect is off [ 6.493276] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 6.493279] scsi 3:0:0:0: Direct-Access ATA WDC WD20EFRX-68E 0A82 PQ: 0 ANSI: 5 [ 6.493293] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.493366] sd 3:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 6.493367] sd 3:0:0:0: [sdd] 4096-byte physical blocks [ 6.493376] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 6.493421] sd 3:0:0:0: [sdd] Write Protect is off [ 6.493422] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 6.493442] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.493549] sdc: sdc1 [ 6.493667] sd 2:0:0:0: [sdc] Attached SCSI disk [ 6.494001] sd 1:0:0:0: [sdb] Attached SCSI disk [ 6.513788] sd 3:0:0:0: [sdd] Attached SCSI disk [ 6.614963] usb 2-6: new SuperSpeed USB device number 2 using xhci_hcd [ 6.623128] usb 1-5: new low-speed USB device number 2 using xhci_hcd [ 6.703033] usb 5-1: new high-speed USB device number 2 using ehci-pci [ 6.740580] usb 2-6: New USB device found, idVendor=174c, idProduct=3074 [ 6.740643] usb 2-6: New USB device strings: Mfr=2, Product=3, SerialNumber=0 [ 6.740695] usb 2-6: Product: ASM107x [ 6.740742] usb 2-6: Manufacturer: ASUS TEK. [ 6.782247] usb 1-5: New USB device found, idVendor=04d9, idProduct=1702 [ 6.782299] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.782350] usb 1-5: Product: USB Keyboard [ 6.782399] usb 1-5: Manufacturer: [ 6.800646] usb 1-5: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 6.800716] usb 1-5: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes [ 6.825952] hub 2-6:1.0: USB hub found [ 6.834450] input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/0003:04D9:1702.0001/input/input2 [ 6.837895] hub 2-6:1.0: 4 ports detected [ 6.853177] usb 5-1: New USB device found, idVendor=8087, idProduct=8002 [ 6.853229] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 6.853428] hub 5-1:1.0: USB hub found [ 6.853539] hub 5-1:1.0: 8 ports detected [ 6.892904] hid-generic 0003:04D9:1702.0001: input,hidraw0: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:14.0-5/input0 [ 6.909486] input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1/0003:04D9:1702.0002/input/input3 [ 6.962829] hid-generic 0003:04D9:1702.0002: input,hidraw1: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:14.0-5/input1 [ 6.992769] tsc: Refined TSC clocksource calibration: 4124.996 MHz [ 6.992829] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3b759bf23ba, max_idle_ns: 440795395207 ns [ 7.142616] usb 1-10: new high-speed USB device number 3 using xhci_hcd [ 7.325955] usb 1-10: New USB device found, idVendor=174c, idProduct=2074 [ 7.326008] usb 1-10: New USB device strings: Mfr=2, Product=3, SerialNumber=0 [ 7.326059] usb 1-10: Product: ASM107x [ 7.326106] usb 1-10: Manufacturer: ASUS TEK. [ 7.326493] hub 1-10:1.0: USB hub found [ 7.326683] hub 1-10:1.0: 4 ports detected [ 7.512247] usb 1-13: new full-speed USB device number 4 using xhci_hcd [ 7.656710] usb 1-13: New USB device found, idVendor=045e, idProduct=07b2 [ 7.656762] usb 1-13: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.656814] usb 1-13: Product: MicrosoftàNano Transceiver v1.0 [ 7.656865] usb 1-13: Manufacturer: Microsoft [ 7.660151] input: Microsoft MicrosoftàNano Transceiver v1.0 as /devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13:1.0/0003:045E:07B2.0003/input/input4 [ 7.712108] hid-generic 0003:045E:07B2.0003: input,hidraw2: USB HID v1.11 Keyboard [Microsoft MicrosoftàNano Transceiver v1.0] on usb-0000:00:14.0-13/input0 [ 7.716365] input: Microsoft MicrosoftàNano Transceiver v1.0 as /devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13:1.1/0003:045E:07B2.0004/input/input5 [ 7.716461] hid-generic 0003:045E:07B2.0004: input,hidraw3: USB HID v1.11 Mouse [Microsoft MicrosoftàNano Transceiver v1.0] on usb-0000:00:14.0-13/input1 [ 7.731296] input: Microsoft MicrosoftàNano Transceiver v1.0 as /devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13:1.2/0003:045E:07B2.0005/input/input6 [ 7.781991] hid-generic 0003:045E:07B2.0005: input,hidraw4: USB HID v1.11 Device [Microsoft MicrosoftàNano Transceiver v1.0] on usb-0000:00:14.0-13/input2 [ 7.991806] clocksource: Switched to clocksource tsc [ 11.378446] md: Waiting for all devices to be available before autodetect [ 11.378501] md: If you don't use raid, use raid=noautodetect [ 11.378664] md: Autodetecting RAID arrays. [ 11.380603] md: invalid raid superblock magic on sdc1 [ 11.380659] md: sdc1 does not have a valid v0.90 superblock, not importing! [ 11.382598] md: invalid raid superblock magic on sdb1 [ 11.382651] md: sdb1 does not have a valid v0.90 superblock, not importing! [ 11.382713] md: Scanned 2 and added 0 devices. [ 11.382761] md: autorun ... [ 11.382807] md: ... autorun DONE. [ 11.388649] EXT4-fs (sda2): couldn't mount as ext3 due to feature incompatibilities [ 11.388867] EXT4-fs (sda2): couldn't mount as ext2 due to feature incompatibilities [ 11.392083] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 11.392138] VFS: Mounted root (ext4 filesystem) readonly on device 8:2. [ 11.393255] devtmpfs: mounted [ 11.393531] Freeing unused kernel memory: 952K (ffffffff81892000 - ffffffff81980000) [ 11.393594] Write protecting the kernel read-only data: 8192k [ 11.393773] Freeing unused kernel memory: 676K (ffff880001557000 - ffff880001600000) [ 11.393866] Freeing unused kernel memory: 260K (ffff8800017bf000 - ffff880001800000) [ 11.419974] random: systemd urandom read with 17 bits of entropy available [ 11.420828] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR) [ 11.421046] systemd[1]: Detected architecture 'x86-64'. [ 11.424731] systemd[1]: Failed to insert module 'ipv6' [ 11.424963] systemd[1]: Set hostname to <xen>. [ 11.455412] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. [ 11.455615] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. [ 11.455692] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 11.455747] systemd[1]: Starting Remote File Systems (Pre). [ 11.456061] systemd[1]: Reached target Remote File Systems (Pre). [ 11.456115] systemd[1]: Starting Encrypted Volumes. [ 11.456413] systemd[1]: Reached target Encrypted Volumes. [ 11.456473] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. [ 11.456818] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 11.456885] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch. [ 11.456948] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 11.457002] systemd[1]: Starting Swap. [ 11.457299] systemd[1]: Reached target Swap. [ 11.457351] systemd[1]: Expecting device dev-sda1.device... [ 11.457571] systemd[1]: Starting Root Slice. [ 11.457873] systemd[1]: Created slice Root Slice. [ 11.457925] systemd[1]: Starting User and Session Slice. [ 11.458236] systemd[1]: Created slice User and Session Slice. [ 11.458289] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. [ 11.458623] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 11.458677] systemd[1]: Starting Delayed Shutdown Socket. [ 11.458983] systemd[1]: Listening on Delayed Shutdown Socket. [ 11.459035] systemd[1]: Starting Journal Socket (/dev/log). [ 11.459345] systemd[1]: Listening on Journal Socket (/dev/log). [ 11.459401] systemd[1]: Starting udev Control Socket. [ 11.459705] systemd[1]: Listening on udev Control Socket. [ 11.459759] systemd[1]: Starting udev Kernel Socket. [ 11.460062] systemd[1]: Listening on udev Kernel Socket. [ 11.460114] systemd[1]: Starting Journal Socket. [ 11.460420] systemd[1]: Listening on Journal Socket. [ 11.460476] systemd[1]: Starting System Slice. [ 11.460786] systemd[1]: Created slice System Slice. [ 11.460843] systemd[1]: Starting File System Check on Root Device... [ 11.461194] systemd[1]: Starting system-systemd\x2dfsck.slice. [ 11.461530] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 11.461585] systemd[1]: Starting system-getty.slice. [ 11.461908] systemd[1]: Created slice system-getty.slice. [ 11.461969] systemd[1]: Starting Increase datagram queue length... [ 11.462333] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 11.462410] systemd[1]: Mounting POSIX Message Queue File System... [ 11.464099] systemd[1]: Starting Load Kernel Modules... [ 11.464489] systemd[1]: Starting Create Static Device Nodes in /dev... [ 11.464898] systemd[1]: Starting udev Coldplug all Devices... [ 11.468342] systemd[1]: Started Set Up Additional Binary Formats. [ 11.468426] systemd[1]: Mounted Debug File System. [ 11.468481] systemd[1]: Mounted Huge Pages File System. [ 11.468536] systemd[1]: Starting Slices. [ 11.468836] systemd[1]: Reached target Slices. [ 11.469278] systemd[1]: Started Load Kernel Modules. [ 11.469363] systemd[1]: Mounting FUSE Control File System... [ 11.469716] systemd[1]: Starting Apply Kernel Variables... [ 11.470122] systemd[1]: Mounting Configuration File System... [ 11.472268] systemd[1]: Started Increase datagram queue length. [ 11.472627] systemd[1]: Mounted POSIX Message Queue File System. [ 11.473108] systemd[1]: Mounted FUSE Control File System. [ 11.473447] systemd[1]: Mounted Configuration File System. [ 11.474667] systemd[1]: Started Apply Kernel Variables. [ 11.477469] systemd[1]: Starting Syslog Socket. [ 11.477779] systemd[1]: Listening on Syslog Socket. [ 11.480042] systemd[1]: Starting Journal Service... [ 11.480795] systemd[1]: Started Journal Service. [ 11.485373] systemd-udevd[2506]: starting version 215 [ 11.523383] md: md0 stopped. [ 11.524116] md: bind<sdc1> [ 11.524291] md: bind<sdb1> [ 11.524482] md/raid1:md0: active with 2 out of 2 mirrors [ 11.524620] created bitmap (4 pages) for device md0 [ 11.524827] md0: bitmap initialized from disk: read 1 pages, set 0 of 7630 bits [ 11.528290] md0: detected capacity change from 0 to 511974899712 [ 11.545294] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro,discard [ 11.584850] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 11.585811] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: discard [ 11.591204] systemd-journald[2037]: Received request to flush runtime journal from PID 1 [ 11.619088] device eth0 entered promiscuous mode [ 14.717005] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 14.717085] xenbr0: port 1(eth0) entered forwarding state [ 14.717138] xenbr0: port 1(eth0) entered forwarding state [ 18.424579] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead. [ 29.720482] xenbr0: port 1(eth0) entered forwarding state [ 81.769788] random: nonblocking pool is initialized 2015-09-08 13:10 GMT+03:00 Jan Beulich <JBeulich@xxxxxxxx>: >>> On 07.09.15 at 20:28, <pasik@xxxxxx> wrote: _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxx http://lists.xen.org/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |