[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Xen-devel] [PATCH RFC] xen: if on Xen, "flatten" the scheduling domain hierarchy
On 09/23/2015 09:24 AM, Dario Faggioli wrote:
On Mon, 2015-09-21 at 07:49 +0200, Juergen Gross wrote:
On 09/15/2015 06:50 PM, Dario Faggioli wrote:
On Thu, 2015-08-20 at 20:16 +0200, Juergen Groà wrote:
On 08/18/2015 05:55 PM, Dario Faggioli wrote:
Hey everyone,
So, as a followup of what we were discussing in this thread:
[Xen-devel] PV-vNUMA issue: topology is misinterpreted by
the guest
http://lists.xenproject.org/archives/html/xen-devel/2015-07/
msg03241.html
I started looking in more details at scheduling domains in the
Linux
kernel. Now, that thread was about CPUID and vNUMA, and their
weird way
of interacting, while this thing I'm proposing here is
completely
independent from them both.
In fact, no matter whether vNUMA is supported and enabled, and
no matter
whether CPUID is reporting accurate, random, meaningful or
completely
misleading information, I think that we should do something
about how
scheduling domains are build.
Fact is, unless we use 1:1, and immutable (across all the guest
lifetime) pinning, scheduling domains should not be
constructed, in
Linux, by looking at *any* topology information, because that
just does
not make any sense, when vcpus move around.
Let me state this again (hoping to make myself as clear as
possible): no
matter in how much good shape we put CPUID support, no matter
how
beautifully and consistently that will interact with both
vNUMA,
licensing requirements and whatever else. It will be always
possible for
vCPU #0 and vCPU #3 to be scheduled on two SMT threads at time
t1, and
on two different NUMA nodes at time t2. Hence, the Linux
scheduler
should really not skew his load balancing logic toward any of
those two
situations, as neither of them could be considered correct
(since
nothing is!).
For now, this only covers the PV case. HVM case shouldn't be
any
different, but I haven't looked at how to make the same thing
happen in
there as well.
OVERALL DESCRIPTION
===================
What this RFC patch does is, in the Xen PV case, configure
scheduling
domains in such a way that there is only one of them, spanning
all the
pCPUs of the guest.
Note that the patch deals directly with scheduling domains, and
there is
no need to alter the masks that will then be used for building
and
reporting the topology (via CPUID, /proc/cpuinfo, /sysfs,
etc.). That is
the main difference between it and the patch proposed by
Juergen here:
http://lists.xenproject.org/archives/html/xen-devel/2015-07/msg
05088.html
This means that when, in future, we will fix CPUID handling and
make it
comply with whatever logic or requirements we want, that won't
have any
unexpected side effects on scheduling domains.
Information about how the scheduling domains are being
constructed
during boot are available in `dmesg', if the kernel is booted
with the
'sched_debug' parameter. It is also possible to look
at /proc/sys/kernel/sched_domain/cpu*, and at /proc/schedstat.
With the patch applied, only one scheduling domain is created,
called
the 'VCPU' domain, spanning all the guest's (or Dom0's) vCPUs.
You can
tell that from the fact that every cpu* folder
in /proc/sys/kernel/sched_domain/ only have one subdirectory
('domain0'), with all the tweaks and the tunables for our
scheduling
domain.
EVALUATION
==========
I've tested this with UnixBench, and by looking at Xen build
time, on a
16, 24 and 48 pCPUs hosts. I've run the benchmarks in Dom0
only, for
now, but I plan to re-run them in DomUs soon (Juergen may be
doing
something similar to this in DomU already, AFAUI).
I've run the benchmarks with and without the patch applied
('patched'
and 'vanilla', respectively, in the tables below), and with
different
number of build jobs (in case of the Xen build) or of parallel
copy of
the benchmarks (in the case of UnixBench).
What I get from the numbers is that the patch almost always
brings
benefits, in some cases even huge ones. There are a couple of
cases
where we regress, but always only slightly so, especially if
comparing
that to the magnitude of some of the improvement that we get.
Bear also in mind that these results are gathered from Dom0,
and without
any overcommitment at the vCPU level (i.e., nr. vCPUs == nr
pCPUs). If
we move things in DomU and do overcommit at the Xen scheduler
level, I
am expecting even better results.
...
REQUEST FOR COMMENTS
====================
Basically, the kind of feedback I'd be really glad to hear is:
- what you guys thing of the approach,
Yesterday at the end of the developer meeting we (Andrew, Elena
and
myself) discussed this topic again.
Hey,
Sorry for replying so late, I've been on vacation from right after
XenSummit up until yesterday. :-)
Regarding a possible future scenario with credit2 eventually
supporting
gang scheduling on hyperthreads (which is desirable due to
security
reasons [side channel attack] and fairness) my patch seems to be
more
suited for that direction than yours.
Ok. Just let me mention that 'Credit2 + gang scheduling' might not
be
exactly around the corner (although, we can prioritize working on
it if
we want).
In principle, I think it's a really nice idea. I still don't have
clear
in mind how we would handle a couple of situations, but let's leave
this
aside for now, and stay on-topic.
Correct me if I'm wrong, but I
think scheduling domains won't enable the guest kernel's
scheduler to
migrate threads more easily between hyperthreads opposed to other
vcpus,
while my approach can easily be extended to do so.
I'm not sure I understand what you mean here. As far as the (Linux)
scheduler is concerned, your patch and mine do the exact same
thing:
they arrange for the scheduling domains, when they're built, during
boot, not to consider hyperthreads or multi-cores.
Mine does it by removing the SMT (and the MC) level from the data
structure in the scheduler that is used as a base for configuring
the
scheduling domains. Yours does it by making the topology bitmaps
that
are used at each one of those level all look the same. In fact,
with
your patch applied, I get the exact same situation as with mine, as
far
as scheduling domains are concerned: there is only one scheduling
domain, with a different scheduling group for each vCPU inside it.
Uuh, nearly.
Your case won't deal correctly with NUMA, as the generic NUMA code is
using set_sched_topology() as well.
Mmm... have you tried and seen something like this? AFAICT, the NUMA
related setup steps of scheduling domains happens after the basic (as
in "without taking NUMAness into account") topology has been set
already, and builds on top of it.
It uses set_sched_topology() only in a special case which, I'm not sure
we'd be hitting.
Depends on the hardware. On some AMD processors one socket covers
multiple NUMA nodes. This is the critical case. set_sched_topology()
will be called on those machines possibly multiple times when bringing
up additional cpus.
I'm asking because trying this out, right now, is not straightforward,
as PV vNUMA, even with Wei's Linux patches and with either yours or
mine one, still incurs in the CPUID issue... I'll try that ASAP, but
there are a couple of things I've got to finish for the next few days.
One of NUMA and Xen will win and
overwrite the other's settings.
Not sure what this means, but as I said, I'll try.
Make sure to use the correct hardware (I'm pretty sure this should be
the AMD "Magny-Cours" [1]).
Juergen
[1]:
http://developer.amd.com/resources/documentation-articles/articles-whitepapers/introduction-to-magny-cours/
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel
|
