[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] [XenGT][IGVT-g] DomU pgt_device structure initialization



Hello.

I tried to fix next error message:
[ 5412.902817] vGT error:(vgt_handle_events:1845) IRQ: abandon non-registered [)
For this did next. In vgt_base_init_irq() (file intrerrput.c) was added next:
if (IS_VLV(pdev)) {
ÂSET_BIT_INFO(hstate, 2, RCS_MMIO_SYNC_FLUSH, IRQ_INFO_GT);
ÂSET_BIT_INFO(hstate, 14, VCS_MMIO_SYNC_FLUSH, IRQ_INFO_GT);
ÂSET_BIT_INFO(hstate, 24, BCS_MMIO_SYNC_FLUSH);
}
UI is working a little bit better, but still with visual laggy.

Why it can be?

Also U wrote earlier:
From my experience such issue is most likely being caused by losing interrupts.

How can I check it?

With best regards,
ÂOleksii

P.S.: Now log is next:
Â__Â __ÂÂÂÂÂÂÂÂÂÂÂ _Â _ÂÂÂ _____Â _
Â\ \/ /___ _ __ÂÂ | || |Â |___ / / |
 \ // _ \ '_ \ | || |_ |_ \ | |
 / \ __/ | | | |__ _| ___) || |
Â/_/\_\___|_| |_|ÂÂÂ |_|(_)____(_)_|
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ
(XEN) Xen version 4.3.1 (vtc@) (gcc (Ubuntu 4.8.4-2ubuntu1~14.04) 4.8.4) debug=n Sat Jan 2 23:40:13 EET 2016
(XEN) Latest ChangeSet: Wed Oct 30 09:18:28 2013 +0100 git:4e8e0bd-dirty
(XEN) Console output is synchronous.
(XEN) Bootloader: GRUB 2.02~beta2-9ubuntu1.3
(XEN) Command line: dom0_mem=2048M loglvl=all guest_loglvl=all conring_size=4M com1=115200,8n1,0x248,5 console=com1,vga sync_console console_to_ring noreboot
(XEN) Video information:
(XEN)Â VGA is text mode 80x25, font 8x16
(XEN)Â VBE/DDC methods: V2; EDID transfer time: 1 seconds
(XEN) Disc information:
(XEN)Â Found 1 MBR signatures
(XEN)Â Found 1 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN)Â 0000000000000000 - 000000000008d800 (usable)
(XEN)Â 000000000008d800 - 00000000000a0000 (reserved)
(XEN)Â 00000000000e0000 - 0000000000100000 (reserved)
(XEN)Â 0000000000100000 - 0000000020000000 (usable)
(XEN)Â 0000000020000000 - 0000000020100000 (reserved)
(XEN)Â 0000000020100000 - 00000000b7753000 (usable)
(XEN)Â 00000000b7753000 - 00000000b7783000 (reserved)
(XEN)Â 00000000b7783000 - 00000000b7793000 (ACPI data)
(XEN)Â 00000000b7793000 - 00000000b78f6000 (ACPI NVS)
(XEN)Â 00000000b78f6000 - 00000000b7bc2000 (reserved)
(XEN)Â 00000000b7bc2000 - 00000000b7bc3000 (usable)
(XEN)Â 00000000b7bc3000 - 00000000b7c05000 (reserved)
(XEN)Â 00000000b7c05000 - 00000000b7d76000 (usable)
(XEN)Â 00000000b7d76000 - 00000000b7ff9000 (reserved)
(XEN)Â 00000000b7ff9000 - 00000000b8000000 (usable)
(XEN)Â 00000000e0000000 - 00000000f0000000 (reserved)
(XEN)Â 00000000fec00000 - 00000000fec01000 (reserved)
(XEN)Â 00000000fed01000 - 00000000fed02000 (reserved)
(XEN)Â 00000000fed03000 - 00000000fed04000 (reserved)
(XEN)Â 00000000fed08000 - 00000000fed09000 (reserved)
(XEN)Â 00000000fed0c000 - 00000000fed10000 (reserved)
(XEN)Â 00000000fed1c000 - 00000000fed1d000 (reserved)
(XEN)Â 00000000fee00000 - 00000000fee01000 (reserved)
(XEN)Â 00000000fef00000 - 00000000ff000000 (reserved)
(XEN)Â 00000000ffb00000 - 0000000100000000 (reserved)
(XEN)Â 0000000100000000 - 0000000140000000 (usable)
(XEN) ACPI: RSDP 000F04A0, 0024 (r2 ALASKA)
(XEN) ACPI: XSDT B7787080, 007C (r1 ALASKAÂÂ A M IÂÂ 1072009 AMIÂÂÂÂ 10013)
(XEN) ACPI: FACP B7791E40, 010C (r5 ALASKAÂÂ A M IÂÂ 1072009 AMIÂÂÂÂ 10013)
(XEN) ACPI: DSDT B7787188, ACB6 (r2 ALASKAÂÂ A M IÂÂ 1072009 INTL 20120913)
(XEN) ACPI: FACS B78F5F80, 0040
(XEN) ACPI: APIC B7791F50, 0068 (r3 ALASKAÂÂ A M IÂÂ 1072009 AMIÂÂÂÂ 10013)
(XEN) ACPI: FPDT B7791FB8, 0044 (r1 ALASKAÂÂ A M IÂÂ 1072009 AMIÂÂÂÂ 10013)
(XEN) ACPI: LPIT B7792000, 0104 (r1 ALASKAÂÂ A M IÂÂÂÂÂÂÂÂ 3 VLV2Â 100000D)
(XEN) ACPI: MCFG B7792108, 003C (r1 ALASKAÂÂ A M IÂÂ 1072009 MSFTÂÂÂÂÂÂ 97)
(XEN) ACPI: HPET B7792148, 0038 (r1 ALASKAÂÂ A M IÂÂ 1072009 AMI.ÂÂÂÂÂÂÂ 5)
(XEN) ACPI: SSDT B7792180, 0763 (r1Â PmRefÂÂÂ CpuPmÂÂÂÂ 3000 INTL 20061109)
(XEN) ACPI: SSDT B77928E8, 0290 (r1 PmRef Cpu0Tst 3000 INTL 20061109)
(XEN) ACPI: SSDT B7792B78, 017A (r1Â PmRefÂÂÂ ApTstÂÂÂÂ 3000 INTL 20061109)
(XEN) ACPI: UEFI B7792CF8, 0042 (r1 ALASKAÂÂ A M IÂÂÂÂÂÂÂÂ 0ÂÂÂÂÂÂÂÂÂÂÂÂ 0)
(XEN) ACPI: CSRT B7792D40, 014C (r0 INTELÂ EDK2ÂÂÂÂÂÂÂÂÂÂÂ 5 INTL 20120624)
(XEN) System RAM: 3959MB (4054372kB)
(XEN) No NUMA configuration found
(XEN) Faking a node at 0000000000000000-0000000140000000
(XEN) Domain heap initialised
(XEN) found SMP MP-table at 000fd6f0
(XEN) DMI 2.7 present.
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x408
(XEN) ACPI: v5 SLEEP INFO: control[0:0], status[0:0]
(XEN) ACPI: SLEEP INFO: pm1x_cnt[404,0], pm1x_evt[400,0]
(XEN) ACPI: 32/64X FACS address mismatch in FADT - b78f5f80/0000000000000000, using 32
(XEN) ACPI:ÂÂÂÂÂÂÂÂÂÂÂÂ wakeup_vec[b78f5f8c], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
(XEN) Processor #0 7:7 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
(XEN) Processor #4 7:7 APIC version 20
(XEN) ACPI: LAPIC_NMI (acpi_id[0x01] low res lint[0x7e])
(XEN) ACPI: NMI not connected to LINT 1!
(XEN) ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0xc6])
(XEN) ACPI: NMI not connected to LINT 1!
(XEN) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-86
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
(XEN) ACPI: HPET id: 0x8086a201 base: 0xfed00000
(XEN) ERST table was not found
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) SMP: Allowing 2 CPUs (0 hotplug CPUs)
(XEN) IRQ limits: 87 GSI, 609 MSI/MSI-X
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 1750.017 MHz processor.
(XEN) Initing memory sharing.
(XEN) mce_intel.c:717: MCA Capability: BCAST 1 SER 0 CMCI 0 firstbank 0 extended MCE MSR 0
(XEN) Intel machine check reporting enabled
(XEN) PCI: MCFG configuration 0: base e0000000 segment 0000 buses 00 - ff
(XEN) PCI: MCFG area at e0000000 reserved in E820
(XEN) PCI: Using MCFG for segment 0000 bus 00-ff
(XEN) I/O virtualisation disabled
(XEN) ENABLING IO-APIC IRQs
(XEN)Â -> Using new ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=0 pin2=0
(XEN) TSC deadline timer enabled
(XEN) Platform timer is 14.318MHz HPET
(XEN) Allocated console ring of 4096 KiB.
(XEN) mwait-idle: does not run on family 6 model 55
(XEN) VMX: Supported advanced features:
(XEN)Â - APIC MMIO access virtualisation
(XEN)Â - APIC TPR shadow
(XEN)Â - Extended Page Tables (EPT)
(XEN)Â - Virtual-Processor Identifiers (VPID)
(XEN)Â - Virtual NMI
(XEN)Â - MSR direct-access bitmap
(XEN)Â - Unrestricted Guest
(XEN) HVM: ASIDs enabled.
(XEN) HVM: VMX enabled
(XEN) HVM: Hardware Assisted Paging (HAP) detected
(XEN) HVM: HAP page sizes: 4kB, 2MB
(XEN) Brought up 2 CPUs
(XEN) ACPI sleep modes: S3
(XEN) mcheck_poll: Machine check polling timer started.
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN)Â Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x1e87000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN)Â Dom0 alloc.:ÂÂ 0000000130000000->0000000134000000 (486315 pages to be allocated)
(XEN)Â Init. ramdisk: 000000013abab000->000000013ffffe00
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN)Â Loaded kernel: ffffffff81000000->ffffffff81e87000
(XEN)Â Init. ramdisk: ffffffff81e87000->ffffffff872dbe00
(XEN)Â Phys-Mach map: ffffffff872dc000->ffffffff876dc000
(XEN)Â Start info:ÂÂÂ ffffffff876dc000->ffffffff876dc4b4
(XEN)Â Page tables:ÂÂ ffffffff876dd000->ffffffff8771c000
(XEN)Â Boot stack:ÂÂÂ ffffffff8771c000->ffffffff8771d000
(XEN)Â TOTAL:ÂÂÂÂÂÂÂÂ ffffffff80000000->ffffffff87800000
(XEN)Â ENTRY ADDRESS: ffffffff818471e0
(XEN) Dom0 has maximum 2 VCPUs
(XEN) Scrubbing Free RAM: ..................done.
(XEN) Initial low memory virq threshold set at 0x4000 pages.
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All
(XEN) **********************************************
(XEN) ******* WARNING: CONSOLE OUTPUT IS SYNCHRONOUS
(XEN) ******* This option is intended to aid debugging of Xen by ensuring
(XEN) ******* that all output is synchronously delivered on the serial line.
(XEN) ******* However it can introduce SIGNIFICANT latencies and affect
(XEN) ******* timekeeping. It is NOT recommended for production use!
(XEN) **********************************************
(XEN) 3... 2... 1...
(XEN) Xen is relinquishing VGA console.
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
(XEN) Freed 276kB init memory.
mapping kernel into physical memory
(XEN) VGT: PHYSDEVOP_set_iopl iopl 1
about to get started...
[ÂÂÂ 0.000000] Initializing cgroup subsys cpuset
[ÂÂÂ 0.000000] Initializing cgroup subsys cpu
[ÂÂÂ 0.000000] Initializing cgroup subsys cpuacct
[ÂÂÂ 0.000000] Linux version 3.11.6-vgt+ (vtc@vtc-VTC1010) (gcc version 4.8.4 (Ubuntu 4.8.4-2ubuntu1~14.04) ) #14 SMP Wed Jan 13 16:42:13 EET 2016 ()
[ÂÂÂ 0.000000] Command line: root=UUID=34dc26f4-ec81-4f9c-bf13-c9283ef72497 rw rd_NO_LUKS rd_NO_LVM LANG=en_US.UTF-8 rd_NO_MD SYSFONT=latarcyrheb-sun16 rhgb crashkernel1
[ÂÂÂ 0.000000] Freeing 8d-100 pfn range: 115 pages freed
[ÂÂÂ 0.000000] 1-1 mapping on 8d->100
[ÂÂÂ 0.000000] Freeing 20000-20100 pfn range: 256 pages freed
[ÂÂÂ 0.000000] 1-1 mapping on 20000->20100
[ÂÂÂ 0.000000] 1-1 mapping on b7753->b7bc2
[ÂÂÂ 0.000000] 1-1 mapping on b7bc3->b7c05
[ÂÂÂ 0.000000] 1-1 mapping on b7d76->b7ff9
[ÂÂÂ 0.000000] 1-1 mapping on b8000->100000
[ÂÂÂ 0.000000] Released 371 pages of unused memory
[ÂÂÂ 0.000000] Set 297127 page(s) to 1-1 mapping
[ÂÂÂ 0.000000] Populating 80000-80173 pfn range: 371 pages added
[ÂÂÂ 0.000000] e820: BIOS-provided physical RAM map:
[ÂÂÂ 0.000000] Xen: [mem 0x0000000000000000-0x000000000008cfff] usable
[ÂÂÂ 0.000000] Xen: [mem 0x000000000008d800-0x00000000000fffff] reserved
[ÂÂÂ 0.000000] Xen: [mem 0x0000000000100000-0x000000001fffffff] usable
[ÂÂÂ 0.000000] Xen: [mem 0x0000000020000000-0x00000000200fffff] reserved
[ÂÂÂ 0.000000] Xen: [mem 0x0000000020100000-0x00000000b7752fff] usable
[ÂÂÂ 0.000000] Xen: [mem 0x00000000b7753000-0x00000000b7782fff] reserved
[ÂÂÂ 0.000000] Xen: [mem 0x00000000b7783000-0x00000000b7792fff] ACPI data
[ÂÂÂ 0.000000] Xen: [mem 0x00000000b7793000-0x00000000b78f5fff] ACPI NVS
[ÂÂÂ 0.000000] Xen: [mem 0x00000000b78f6000-0x00000000b7bc1fff] reserved
[ÂÂÂ 0.000000] Xen: [mem 0x00000000b7bc2000-0x00000000b7bc2fff] usable
[ÂÂÂ 0.000000] Xen: [mem 0x00000000b7bc3000-0x00000000b7c04fff] reserved
[ÂÂÂ 0.000000] Xen: [mem 0x00000000b7c05000-0x00000000b7d75fff] usable
[ÂÂÂ 0.000000] Xen: [mem 0x00000000b7d76000-0x00000000b7ff8fff] reserved
[ÂÂÂ 0.000000] Xen: [mem 0x00000000b7ff9000-0x00000000b7ffffff] usable
[ÂÂÂ 0.000000] Xen: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ÂÂÂ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ÂÂÂ 0.000000] Xen: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[ÂÂÂ 0.000000] Xen: [mem 0x00000000fed03000-0x00000000fed03fff] reserved
[ÂÂÂ 0.000000] Xen: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[ÂÂÂ 0.000000] Xen: [mem 0x00000000fed0c000-0x00000000fed0ffff] reserved
[ÂÂÂ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1cfff] reserved
[ÂÂÂ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feffffff] reserved
[ÂÂÂ 0.000000] Xen: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[ÂÂÂ 0.000000] Xen: [mem 0x0000000100000000-0x000000013fffffff] usable
[ÂÂÂ 0.000000] debug: ignoring loglevel setting.
[ÂÂÂ 0.000000] NX (Execute Disable) protection: active
[ÂÂÂ 0.000000] SMBIOS 2.8 present.
[ÂÂÂ 0.000000] DMI: NEXCOM VTC1010/Aptio CRB, BIOS MV11B127 01/23/2015
[ÂÂÂ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ÂÂÂ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ÂÂÂ 0.000000] No AGP bridge found
[ÂÂÂ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ÂÂÂ 0.000000] e820: last_pfn = 0xb8000 max_arch_pfn = 0x400000000
[ÂÂÂ 0.000000] Base memory trampoline at [ffff880000087000] 87000 size 24576
[ÂÂÂ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ÂÂÂ 0.000000]Â [mem 0x00000000-0x000fffff] page 4k
[ÂÂÂ 0.000000] init_memory_mapping: [mem 0x7fe00000-0x7fffffff]
[ÂÂÂ 0.000000]Â [mem 0x7fe00000-0x7fffffff] page 4k
[ÂÂÂ 0.000000] BRK [0x01a7d000, 0x01a7dfff] PGTABLE
[ÂÂÂ 0.000000] BRK [0x01a7e000, 0x01a7efff] PGTABLE
[ÂÂÂ 0.000000] init_memory_mapping: [mem 0x7c000000-0x7fdfffff]
[ÂÂÂ 0.000000]Â [mem 0x7c000000-0x7fdfffff] page 4k
[ÂÂÂ 0.000000] BRK [0x01a7f000, 0x01a7ffff] PGTABLE
[ÂÂÂ 0.000000] BRK [0x01a80000, 0x01a80fff] PGTABLE
[ÂÂÂ 0.000000] BRK [0x01a81000, 0x01a81fff] PGTABLE
[ÂÂÂ 0.000000] BRK [0x01a82000, 0x01a82fff] PGTABLE
[ÂÂÂ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[ÂÂÂ 0.000000]Â [mem 0x00100000-0x1fffffff] page 4k
[ÂÂÂ 0.000000] init_memory_mapping: [mem 0x20100000-0x7bffffff]
[ÂÂÂ 0.000000]Â [mem 0x20100000-0x7bffffff] page 4k
[ÂÂÂ 0.000000] init_memory_mapping: [mem 0x80000000-0xb7752fff]
[ÂÂÂ 0.000000]Â [mem 0x80000000-0xb7752fff] page 4k
[ÂÂÂ 0.000000] init_memory_mapping: [mem 0xb7bc2000-0xb7bc2fff]
[ÂÂÂ 0.000000]Â [mem 0xb7bc2000-0xb7bc2fff] page 4k
[ÂÂÂ 0.000000] init_memory_mapping: [mem 0xb7c05000-0xb7d75fff]
[ÂÂÂ 0.000000]Â [mem 0xb7c05000-0xb7d75fff] page 4k
[ÂÂÂ 0.000000] init_memory_mapping: [mem 0xb7ff9000-0xb7ffffff]
[ÂÂÂ 0.000000]Â [mem 0xb7ff9000-0xb7ffffff] page 4k
[ÂÂÂ 0.000000] init_memory_mapping: [mem 0x100000000-0x13fffffff]
[ÂÂÂ 0.000000]Â [mem 0x100000000-0x13fffffff] page 4k
[ÂÂÂ 0.000000] log_buf_len: 4194304
[ÂÂÂ 0.000000] early log buf free: 125956(96%)
[ÂÂÂ 0.000000] RAMDISK: [mem 0x01e87000-0x072dbfff]
[ÂÂÂ 0.000000] crashkernel: memory value expected
[ÂÂÂ 0.000000] ACPI: Local APIC address 0xfee00000
[ÂÂÂ 0.000000] NUMA turned off
[ÂÂÂ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[ÂÂÂ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
[ÂÂÂ 0.000000]ÂÂ NODE_DATA [mem 0x7f5ef000-0x7f5f2fff]
[ÂÂÂ 0.000000] Zone ranges:
[ÂÂÂ 0.000000]ÂÂ DMAÂÂÂÂÂ [mem 0x00001000-0x00ffffff]
[ÂÂÂ 0.000000]ÂÂ DMA32ÂÂÂ [mem 0x01000000-0xffffffff]
[ÂÂÂ 0.000000]ÂÂ NormalÂÂ [mem 0x100000000-0x13fffffff]
[ÂÂÂ 0.000000] Movable zone start for each node
[ÂÂÂ 0.000000] Early memory node ranges
[ÂÂÂ 0.000000]ÂÂ nodeÂÂ 0: [mem 0x00001000-0x0008cfff]
[ÂÂÂ 0.000000]ÂÂ nodeÂÂ 0: [mem 0x00100000-0x1fffffff]
[ÂÂÂ 0.000000]ÂÂ nodeÂÂ 0: [mem 0x20100000-0xb7752fff]
[ÂÂÂ 0.000000]ÂÂ nodeÂÂ 0: [mem 0xb7bc2000-0xb7bc2fff]
[ÂÂÂ 0.000000]ÂÂ nodeÂÂ 0: [mem 0xb7c05000-0xb7d75fff]
[ÂÂÂ 0.000000]ÂÂ nodeÂÂ 0: [mem 0xb7ff9000-0xb7ffffff]
[ÂÂÂ 0.000000]ÂÂ nodeÂÂ 0: [mem 0x100000000-0x13fffffff]
[ÂÂÂ 0.000000] On node 0 totalpages: 1013592
[ÂÂÂ 0.000000]ÂÂ DMA zone: 64 pages used for memmap
[ÂÂÂ 0.000000]ÂÂ DMA zone: 21 pages reserved
[ÂÂÂ 0.000000]ÂÂ DMA zone: 3980 pages, LIFO batch:0
[ÂÂÂ 0.000000]ÂÂ DMA32 zone: 11680 pages used for memmap
[ÂÂÂ 0.000000]ÂÂ DMA32 zone: 747468 pages, LIFO batch:31
[ÂÂÂ 0.000000]ÂÂ Normal zone: 4096 pages used for memmap
[ÂÂÂ 0.000000]ÂÂ Normal zone: 262144 pages, LIFO batch:31
[ÂÂÂ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ÂÂÂ 0.000000] ACPI: Local APIC address 0xfee00000
[ÂÂÂ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ÂÂÂ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[ÂÂÂ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] low res lint[0x7e])
[ÂÂÂ 0.000000] ACPI: NMI not connected to LINT 1!
[ÂÂÂ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0xc6])
[ÂÂÂ 0.000000] ACPI: NMI not connected to LINT 1!
[ÂÂÂ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ÂÂÂ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-86
[ÂÂÂ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ÂÂÂ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ÂÂÂ 0.000000] ACPI: IRQ0 used by override.
[ÂÂÂ 0.000000] ACPI: IRQ2 used by override.
[ÂÂÂ 0.000000] ACPI: IRQ9 used by override.
[ÂÂÂ 0.000000] Using ACPI (MADT) for SMP configuration information
[ÂÂÂ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ÂÂÂ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ÂÂÂ 0.000000] nr_irqs_gsi: 103
[ÂÂÂ 0.000000] PM: Registered nosave memory: [mem 0x0008d000-0x0008dfff]
[ÂÂÂ 0.000000] PM: Registered nosave memory: [mem 0x0008e000-0x000fffff]
[ÂÂÂ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x200fffff]
[ÂÂÂ 0.000000] PM: Registered nosave memory: [mem 0xb7753000-0xb7782fff]
[ÂÂÂ 0.000000] PM: Registered nosave memory: [mem 0xb7783000-0xb7792fff]
[ÂÂÂ 0.000000] PM: Registered nosave memory: [mem 0xb7793000-0xb78f5fff]
[ÂÂÂ 0.000000] PM: Registered nosave memory: [mem 0xb78f6000-0xb7bc1fff]
[ÂÂÂ 0.000000] PM: Registered nosave memory: [mem 0xb7bc3000-0xb7c04fff]
[ÂÂÂ 0.000000] PM: Registered nosave memory: [mem 0xb7d76000-0xb7ff8fff]
[ÂÂÂ 0.000000] PM: Registered nosave memory: [mem 0xb8000000-0xdfffffff]
[ÂÂÂ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ÂÂÂ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[ÂÂÂ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ÂÂÂ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed00fff]
[ÂÂÂ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
[ÂÂÂ 0.000000] PM: Registered nosave memory: [mem 0xfed02000-0xfed02fff]
[ÂÂÂ 0.000000] PM: Registered nosave memory: [mem 0xfed03000-0xfed03fff]
[ÂÂÂ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed07fff]
[ÂÂÂ 0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
[ÂÂÂ 0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0bfff]
[ÂÂÂ 0.000000] PM: Registered nosave memory: [mem 0xfed0c000-0xfed0ffff]
[ÂÂÂ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed1bfff]
[ÂÂÂ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1cfff]
[ÂÂÂ 0.000000] PM: Registered nosave memory: [mem 0xfed1d000-0xfedfffff]
[ÂÂÂ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfeffffff]
[ÂÂÂ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffafffff]
[ÂÂÂ 0.000000] PM: Registered nosave memory: [mem 0xffb00000-0xffffffff]
[ÂÂÂ 0.000000] e820: [mem 0xb8000000-0xdfffffff] available for PCI devices
[ÂÂÂ 0.000000] Booting paravirtualized kernel on Xen
[ÂÂÂ 0.000000] Xen version: 4.3.1 (preserve-AD)
[ÂÂÂ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
[ÂÂÂ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88007f200000 s83072 r8192 d23424 u1048576
[ÂÂÂ 0.000000] pcpu-alloc: s83072 r8192 d23424 u1048576 alloc=1*2097152
[ÂÂÂ 0.000000] pcpu-alloc: [0] 0 1
[ 4.776665] Built 1 zonelists in Node order, mobility grouping on. Total pages: 997731
[ÂÂÂ 4.776730] Policy zone: Normal
[ÂÂÂ 4.777618] Kernel command line: root=UUID=34dc26f4-ec81-4f9c-bf13-c9283ef72497 rw rd_NO_LUKS rd_NO_LVM LANG=en_US.UTF-8 rd_NO_MD SYSFONT=latarcyrheb-sun16 rhgb cras1
[ÂÂÂ 4.778267] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ÂÂÂ 4.844477] software IO TLB [mem 0x76e00000-0x7ae00000] (64MB) mapped at [ffff880076e00000-ffff88007adfffff]
[ÂÂÂ 4.859380] Memory: 1853820K/4054368K available (5161K kernel code, 652K rwdata, 2560K rodata, 996K init, 1224K bss, 2200548K reserved)
[ÂÂÂ 4.859704] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ÂÂÂ 4.859839] Hierarchical RCU implementation.
[ÂÂÂ 4.860002]Â RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=2.
[ÂÂÂ 4.860104] NR_IRQS:4352 nr_irqs:512 16
[ÂÂÂ 4.860360] xen: sci override: global_irq=9 trigger=0 polarity=0
[ÂÂÂ 4.860501] xen: registering gsi 9 triggering 0 polarity 0
[ÂÂÂ 4.860622] xen: --> pirq=9 -> irq=9 (gsi=9)
[ÂÂÂ 4.860679] xen: acpi sci 9
[ÂÂÂ 4.860787] xen: --> pirq=1 -> irq=1 (gsi=1)
[ÂÂÂ 4.860892] xen: --> pirq=2 -> irq=2 (gsi=2)
[ÂÂÂ 4.861005] xen: --> pirq=3 -> irq=3 (gsi=3)
[ÂÂÂ 4.861108] xen: --> pirq=4 -> irq=4 (gsi=4)
[ÂÂÂ 4.861212] xen: --> pirq=5 -> irq=5 (gsi=5)
[ÂÂÂ 4.861315] xen: --> pirq=6 -> irq=6 (gsi=6)
[ÂÂÂ 4.861419] xen: --> pirq=7 -> irq=7 (gsi=7)
[ÂÂÂ 4.861522] xen: --> pirq=8 -> irq=8 (gsi=8)
[ÂÂÂ 4.861634] xen: --> pirq=10 -> irq=10 (gsi=10)
[ÂÂÂ 4.861749] xen: --> pirq=11 -> irq=11 (gsi=11)
[ÂÂÂ 4.861868] xen: --> pirq=12 -> irq=12 (gsi=12)
[ÂÂÂ 4.861984] xen: --> pirq=13 -> irq=13 (gsi=13)
[ÂÂÂ 4.862099] xen: --> pirq=14 -> irq=14 (gsi=14)
[ÂÂÂ 4.862214] xen: --> pirq=15 -> irq=15 (gsi=15)
[ÂÂÂ 4.866158] Console: colour VGA+ 80x25
[ÂÂÂ 4.886747] console [tty0] enabled
[ÂÂÂ 5.966688] console [hvc0] enabled
[ÂÂÂ 5.970360] Xen: using vcpuop timer interface
[ÂÂÂ 5.977076] installing Xen timer for CPU 0
[ÂÂÂ 5.981451] tsc: Detected 1750.017 MHz processor
[ÂÂÂ 5.986212] Calibrating delay loop (skipped), value calculated using timer frequency.. 3500.03 BogoMIPS (lpj=1750017)
[ÂÂÂ 5.997409] pid_max: default: 32768 minimum: 301
[ÂÂÂ 6.002290] Security Framework initialized
[ÂÂÂ 6.008195] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ÂÂÂ 6.018423] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ÂÂÂ 6.026672] Mount-cache hash table entries: 256
[ÂÂÂ 6.032178] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ÂÂÂ 6.032178] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ÂÂÂ 6.045612] CPU: Physical Processor ID: 0
[ÂÂÂ 6.049823] CPU: Processor Core ID: 0
[ÂÂÂ 6.058531] mce: CPU supports 2 MCE banks
[ÂÂÂ 6.063023] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ÂÂÂ 6.063023] Last level dTLB entries: 4KB 128, 2MB 0, 4MB 0
[ÂÂÂ 6.063023] tlb_flushall_shift: 6
[ÂÂÂ 6.077915] Freeing SMP alternatives memory: 24K (ffffffff8192b000 - ffffffff81931000)
[ÂÂÂ 6.087804] ACPI: Core revision 20130517
[ÂÂÂ 6.103807] Performance Events: unsupported p6 CPU model 55 no PMU driver, software events only.
[ÂÂÂ 6.113635] installing Xen timer for CPU 1
[ÂÂÂ 6.123128] Brought up 2 CPUs
[ÂÂÂ 6.127181] devtmpfs: initialized
[ÂÂÂ 6.131908] PM: Registering ACPI NVS region [mem 0xb7793000-0xb78f5fff] (1454080 bytes)
[ÂÂÂ 6.140845] xen:grant_table: Grant tables using version 2 layout
[ÂÂÂ 6.147145] Grant table initialized
[ÂÂÂ 6.150893] RTC time: 16:38:52, date: 01/13/16
[ÂÂÂ 6.155672] NET: Registered protocol family 16
[ÂÂÂ 6.163442] ACPI: bus type PCI registered
[ÂÂÂ 6.169460] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ÂÂÂ 6.179169] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ÂÂÂ 6.266326] PCI: Using configuration type 1 for base access
[ÂÂÂ 6.323446] bio: create slab <bio-0> at 0
[ÂÂÂ 6.328515] ACPI: Added _OSI(Module Device)
[ÂÂÂ 6.332958] ACPI: Added _OSI(Processor Device)
[ÂÂÂ 6.337636] ACPI: Added _OSI(3.0 _SCP Extensions)
[ÂÂÂ 6.342604] ACPI: Added _OSI(Processor Aggregator Device)
[ÂÂÂ 6.350810] ACPI: EC: Look up EC in DSDT
[ÂÂÂ 6.389173] ACPI: Interpreter enabled
[ÂÂÂ 6.393098] ACPI: (supports S0 S3 S4 S5)
[ÂÂÂ 6.397262] ACPI: Using IOAPIC for interrupt routing
[ÂÂÂ 6.402999] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ÂÂÂ 6.412709] ACPI: No dock devices found.
[ÂÂÂ 6.454870] ACPI: Power Resource [USBC] (on)
[ÂÂÂ 6.464627] ACPI: Power Resource [FN00] (off)
[ÂÂÂ 6.471080] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ÂÂÂ 6.477580] \_SB_.PCI0:_OSC invalid UUID
[ÂÂÂ 6.481633] _OSC request data:1 8 0
[ÂÂÂ 6.485518] \_SB_.PCI0:_OSC invalid UUID
[ÂÂÂ 6.489573] _OSC request data:1 1f 0
[ÂÂÂ 6.493707] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ÂÂÂ 6.502232] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ÂÂÂ 6.511194] PCI host bridge to bus 0000:00
[ÂÂÂ 6.515707] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 6.521603] pci_bus 0000:00: root bus resource [io 0x0000-0x006f]
[ 6.528184] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7]
[ 6.534770] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ÂÂÂ 6.541384] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ÂÂÂ 6.548687] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ÂÂÂ 6.555985] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff]
[ÂÂÂ 6.563303] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xd0818ffe]
[ÂÂÂ 6.570583] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000
(XEN) PCI add device 0000:00:00.0
[ÂÂÂ 6.580518] pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000
[ÂÂÂ 6.586974] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff]
[ÂÂÂ 6.593692] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff pref]
[ 6.600797] pci 0000:00:02.0: reg 0x20: [io 0xe080-0xe087]
(XEN) PCI add device 0000:00:02.0
[ÂÂÂ 6.610415] pci 0000:00:12.0: [8086:0f16] type 00 class 0x080501
[ÂÂÂ 6.616887] pci 0000:00:12.0: reg 0x10: [mem 0xd0818000-0xd0818fff]
[ÂÂÂ 6.623578] pci 0000:00:12.0: reg 0x14: [mem 0xd0817000-0xd0817fff]
[ÂÂÂ 6.630377] pci 0000:00:12.0: PME# supported from D0 D3hot
(XEN) PCI add device 0000:00:12.0
[ÂÂÂ 6.639776] pci 0000:00:13.0: [8086:0f23] type 00 class 0x010601
[ 6.646232] pci 0000:00:13.0: reg 0x10: [io 0xe070-0xe077]
[ 6.652207] pci 0000:00:13.0: reg 0x14: [io 0xe060-0xe063]
[ 6.658175] pci 0000:00:13.0: reg 0x18: [io 0xe050-0xe057]
[ 6.664146] pci 0000:00:13.0: reg 0x1c: [io 0xe040-0xe043]
[ 6.670121] pci 0000:00:13.0: reg 0x20: [io 0xe020-0xe03f]
[ÂÂÂ 6.676112] pci 0000:00:13.0: reg 0x24: [mem 0xd0816000-0xd08167ff]
[ÂÂÂ 6.682862] pci 0000:00:13.0: PME# supported from D3hot
(XEN) PCI add device 0000:00:13.0
[ÂÂÂ 6.692013] pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000
[ÂÂÂ 6.698491] pci 0000:00:1a.0: reg 0x10: [mem 0xd0500000-0xd05fffff]
[ÂÂÂ 6.705187] pci 0000:00:1a.0: reg 0x14: [mem 0xd0400000-0xd04fffff]
[ÂÂÂ 6.712024] pci 0000:00:1a.0: PME# supported from D0 D3hot
(XEN) PCI add device 0000:00:1a.0
[ÂÂÂ 6.721362] pci 0000:00:1b.0: [8086:0f04] type 00 class 0x040300
[ÂÂÂ 6.727869] pci 0000:00:1b.0: reg 0x10: [mem 0xd0804000-0xd0807fff 64bit]
[ÂÂÂ 6.735222] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
(XEN) PCI add device 0000:00:1b.0
[ÂÂÂ 6.745158] pci 0000:00:1c.0: [8086:0f48] type 01 class 0x060400
[ÂÂÂ 6.751748] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
(XEN) PCI add device 0000:00:1c.0
[ÂÂÂ 6.761734] pci 0000:00:1c.1: [8086:0f4a] type 01 class 0x060400
[ÂÂÂ 6.768334] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
(XEN) PCI add device 0000:00:1c.1
[ÂÂÂ 6.778335] pci 0000:00:1c.2: [8086:0f4c] type 01 class 0x060400
[ÂÂÂ 6.784915] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
(XEN) PCI add device 0000:00:1c.2
[ÂÂÂ 6.794864] pci 0000:00:1c.3: [8086:0f4e] type 01 class 0x060400
[ÂÂÂ 6.801451] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
(XEN) PCI add device 0000:00:1c.3
[ÂÂÂ 6.811488] pci 0000:00:1d.0: [8086:0f34] type 00 class 0x0c0320
[ÂÂÂ 6.817976] pci 0000:00:1d.0: reg 0x10: [mem 0xd0810000-0xd08103ff]
[ÂÂÂ 6.824870] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ÂÂÂ 6.831549] pci 0000:00:1d.0: System wakeup disabled by ACPI
(XEN) PCI add device 0000:00:1d.0
[ÂÂÂ 6.840981] pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100
(XEN) PCI add device 0000:00:1f.0
[ÂÂÂ 6.851056] pci 0000:00:1f.3: [8086:0f12] type 00 class 0x0c0500
[ÂÂÂ 6.857542] pci 0000:00:1f.3: reg 0x10: [mem 0xd080c000-0xd080c01f]
[ 6.864311] pci 0000:00:1f.3: reg 0x20: [io 0xe000-0xe01f]
(XEN) PCI add device 0000:00:1f.3
[ÂÂÂ 6.874329] pci 0000:01:00.0: [8086:1533] type 00 class 0x020000
[ÂÂÂ 6.880810] pci 0000:01:00.0: reg 0x10: [mem 0xd0700000-0xd077ffff]
[ 6.887513] pci 0000:01:00.0: reg 0x18: [io 0xd000-0xd01f]
[ÂÂÂ 6.893526] pci 0000:01:00.0: reg 0x1c: [mem 0xd0780000-0xd0783fff]
[ÂÂÂ 6.900410] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ÂÂÂ 6.906981] pci 0000:01:00.0: System wakeup disabled by ACPI
(XEN) PCI add device 0000:01:00.0
[ÂÂÂ 6.918390] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 6.923760] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
[ÂÂÂ 6.930277] pci 0000:00:1c.0:ÂÂ bridge window [mem 0xd0700000-0xd07fffff]
[ÂÂÂ 6.937955] pci 0000:02:00.0: [8086:08b1] type 00 class 0x028000
[ÂÂÂ 6.944588] pci 0000:02:00.0: reg 0x10: [mem 0xd0600000-0xd0601fff 64bit]
[ÂÂÂ 6.952683] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ÂÂÂ 6.959342] pci 0000:02:00.0: System wakeup disabled by ACPI
(XEN) PCI add device 0000:02:00.0
[ÂÂÂ 6.970774] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ÂÂÂ 6.976171] pci 0000:00:1c.1:ÂÂ bridge window [mem 0xd0600000-0xd06fffff]
[ÂÂÂ 6.983683] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ÂÂÂ 6.989419] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ÂÂÂ 6.997225] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *10 11 12 14 15)
[ÂÂÂ 7.004487] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 10 11 12 14 15)
[ÂÂÂ 7.011746] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 10 11 12 14 15)
[ÂÂÂ 7.019003] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ÂÂÂ 7.026264] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ÂÂÂ 7.034758] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *10 11 12 14 15)
[ÂÂÂ 7.042023] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 10 11 12 14 15)
[ÂÂÂ 7.049276] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
[ÂÂÂ 7.057962] ACPI: \_SB_.PCI0: notify handler is installed
[ÂÂÂ 7.063720] Found 1 acpi root devices
[ÂÂÂ 7.068181] xen:balloon: Initialising balloon driver
[ÂÂÂ 7.085558] xen_balloon: Initialising balloon driver
[ÂÂÂ 7.091881] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ÂÂÂ 7.100228] vgaarb: loaded
[ÂÂÂ 7.103205] vgaarb: bridge control possible 0000:00:02.0
[ÂÂÂ 7.109357] SCSI subsystem initialized
[ÂÂÂ 7.113371] ACPI: bus type ATA registered
[ÂÂÂ 7.118281] libata version 3.00 loaded.
[ÂÂÂ 7.122623] ACPI: bus type USB registered
[ÂÂÂ 7.127290] usbcore: registered new interface driver usbfs
[ÂÂÂ 7.133281] usbcore: registered new interface driver hub
[ÂÂÂ 7.139187] usbcore: registered new device driver usb
[ÂÂÂ 7.145915] PCI: Using ACPI for IRQ routing
[ÂÂÂ 7.167788] PCI: pci_cache_line_size set to 64 bytes
[ÂÂÂ 7.173244] pci 0000:00:12.0: no compatible bridge window for [mem 0xd0818000-0xd0818fff]
[ÂÂÂ 7.181891] e820: reserve RAM buffer [mem 0x0008d000-0x0008ffff]
[ÂÂÂ 7.188174] e820: reserve RAM buffer [mem 0xb7753000-0xb7ffffff]
[ÂÂÂ 7.194459] e820: reserve RAM buffer [mem 0xb7bc3000-0xb7ffffff]
[ÂÂÂ 7.200752] e820: reserve RAM buffer [mem 0xb7d76000-0xb7ffffff]
[ÂÂÂ 7.208024] NetLabel: Initializing
[ÂÂÂ 7.211694] NetLabel:Â domain hash size = 128
[ÂÂÂ 7.216309] NetLabel:Â protocols = UNLABELED CIPSOv4
[ÂÂÂ 7.221559] NetLabel:Â unlabeled traffic allowed by default
[ÂÂÂ 7.227729] Switched to clocksource xen
[ÂÂÂ 7.235627] pnp: PnP ACPI init
[ÂÂÂ 7.238944] ACPI: bus type PNP registered
[ÂÂÂ 7.243704] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ÂÂÂ 7.250578] xen: registering gsi 8 triggering 0 polarity 0
[ÂÂÂ 7.256753] pnp 00:01: Plug and Play ACPI device, IDs PNP0103 (active)
[ÂÂÂ 7.264189] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 7.271458] system 00:03: [io 0x0680-0x069f] has been reserved
[ 7.277764] system 00:03: [io 0x0400-0x047f] has been reserved
[ 7.284082] system 00:03: [io 0x0500-0x05fe] has been reserved
[ 7.290372] system 00:03: [io 0x0e90-0x0e9f] has been reserved
[ 7.296661] system 00:03: [io 0x0ed0-0x0edf] has been reserved
[ 7.302967] system 00:03: [io 0x0ee0-0x0eef] has been reserved
[ÂÂÂ 7.309286] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 7.317048] system 00:04: [io 0x0a00-0x0a1f] has been reserved
[ 7.323356] system 00:04: [io 0x0a20-0x0a2f] has been reserved
[ 7.329659] system 00:04: [io 0x0a30-0x0a3f] has been reserved
[ÂÂÂ 7.335993] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ÂÂÂ 7.346079] xen: registering gsi 5 triggering 1 polarity 0
[ÂÂÂ 7.351773] Already setup the GSI :5
[ÂÂÂ 7.355645] pnp 00:05: [dma 0 disabled]
[ÂÂÂ 7.360126] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ÂÂÂ 7.367500] xen: registering gsi 3 triggering 1 polarity 0
[ÂÂÂ 7.373298] pnp 00:06: [dma 0 disabled]
[ÂÂÂ 7.377928] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ÂÂÂ 7.385253] ACPI: IRQ 11 override to edge, high
[ÂÂÂ 7.390054] xen: registering gsi 11 triggering 1 polarity 0
[ÂÂÂ 7.395940] pnp 00:07: [dma 0 disabled]
[ÂÂÂ 7.400549] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ÂÂÂ 7.407873] ACPI: IRQ 10 override to edge, high
[ÂÂÂ 7.412667] xen: registering gsi 10 triggering 1 polarity 0
[ÂÂÂ 7.418544] pnp 00:08: [dma 0 disabled]
[ÂÂÂ 7.423247] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ÂÂÂ 7.430550] ACPI: IRQ 6 override to edge, high
[ÂÂÂ 7.435261] xen: registering gsi 6 triggering 1 polarity 0
[ÂÂÂ 7.441072] pnp 00:09: [dma 0 disabled]
[ÂÂÂ 7.445656] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[ÂÂÂ 7.452974] ACPI: IRQ 7 override to edge, high
[ÂÂÂ 7.457690] xen: registering gsi 7 triggering 1 polarity 0
[ÂÂÂ 7.463489] pnp 00:0a: [dma 0 disabled]
[ÂÂÂ 7.468176] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
[ÂÂÂ 7.475960] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[ÂÂÂ 7.482993] system 00:0b: [mem 0xfed01000-0xfed01fff] has been reserved
[ÂÂÂ 7.490013] system 00:0b: [mem 0xfed03000-0xfed03fff] has been reserved
[ÂÂÂ 7.497045] system 00:0b: [mem 0xfed04000-0xfed04fff] has been reserved
[ÂÂÂ 7.504061] system 00:0b: [mem 0xfed08000-0xfed08fff] has been reserved
[ÂÂÂ 7.511082] system 00:0b: [mem 0xfed1c000-0xfed1cfff] has been reserved
[ÂÂÂ 7.518098] system 00:0b: [mem 0xfee00000-0xfeefffff] has been reserved
[ÂÂÂ 7.525120] system 00:0b: [mem 0xfef00000-0xfeffffff] has been reserved
[ÂÂÂ 7.532152] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ÂÂÂ 7.540292] pnp: PnP ACPI: found 12 devices
[ÂÂÂ 7.544695] ACPI: bus type PNP unregistered
[ 7.587276] PM-Timer failed consistency check (0x0xffffff) - aborting.
[ÂÂÂ 7.594468] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
[ 7.605020] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ÂÂÂ 7.613842] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 7.624384] pci 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
[ÂÂÂ 7.633142] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[ÂÂÂ 7.643693] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000
[ 7.653287] pci 0000:00:1c.3: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
[ÂÂÂ 7.662054] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000
[ÂÂÂ 7.672605] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000
[ÂÂÂ 7.682228] pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ÂÂÂ 7.692624] pci 0000:00:1c.1: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ÂÂÂ 7.703017] pci 0000:00:1c.2: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ÂÂÂ 7.712470] pci 0000:00:1c.2: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ÂÂÂ 7.722853] pci 0000:00:1c.3: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ÂÂÂ 7.732296] pci 0000:00:1c.3: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 7.742647] pci 0000:00:1c.1: res[7]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 7.751175] pci 0000:00:1c.2: res[7]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 7.759704] pci 0000:00:1c.3: res[7]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ÂÂÂ 7.768200] pci 0000:00:1c.0: BAR 9: can't assign mem pref (size 0x200000)
[ÂÂÂ 7.775487] pci 0000:00:1c.1: BAR 9: can't assign mem pref (size 0x200000)
[ÂÂÂ 7.782765] pci 0000:00:1c.2: BAR 8: can't assign mem (size 0x200000)
[ÂÂÂ 7.789628] pci 0000:00:1c.2: BAR 9: can't assign mem pref (size 0x200000)
[ÂÂÂ 7.796910] pci 0000:00:1c.3: BAR 8: can't assign mem (size 0x200000)
[ÂÂÂ 7.803759] pci 0000:00:1c.3: BAR 9: can't assign mem pref (size 0x200000)
[ÂÂÂ 7.811043] pci 0000:00:12.0: BAR 0: assigned [mem 0xd0800000-0xd0800fff]
[ 7.818232] pci 0000:00:1c.1: BAR 7: assigned [io 0x1000-0x1fff]
[ 7.824705] pci 0000:00:1c.2: BAR 7: assigned [io 0x2000-0x2fff]
[ 7.831184] pci 0000:00:1c.3: BAR 7: assigned [io 0x3000-0x3fff]
[ÂÂÂ 7.837695] pci 0000:00:12.0: BAR 0: assigned [mem 0xd0800000-0xd0800fff]
[ÂÂÂ 7.844884] pci 0000:00:1c.3: BAR 8: can't assign mem (size 0x200000)
[ÂÂÂ 7.851748] pci 0000:00:1c.3: BAR 9: can't assign mem pref (size 0x200000)
[ÂÂÂ 7.859021] pci 0000:00:1c.2: BAR 8: can't assign mem (size 0x200000)
[ÂÂÂ 7.865886] pci 0000:00:1c.2: BAR 9: can't assign mem pref (size 0x200000)
[ÂÂÂ 7.873171] pci 0000:00:1c.1: BAR 9: can't assign mem pref (size 0x200000)
[ÂÂÂ 7.880454] pci 0000:00:1c.0: BAR 9: can't assign mem pref (size 0x200000)
[ÂÂÂ 7.887674] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 7.893022] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
[ÂÂÂ 7.899529] pci 0000:00:1c.0:ÂÂ bridge window [mem 0xd0700000-0xd07fffff]
[ÂÂÂ 7.906680] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 7.912041] pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff]
[ÂÂÂ 7.918540] pci 0000:00:1c.1:ÂÂ bridge window [mem 0xd0600000-0xd06fffff]
[ÂÂÂ 7.925696] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 7.931042] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ÂÂÂ 7.937508] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 7.942869] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
[ÂÂÂ 7.949390] xen: registering gsi 16 triggering 0 polarity 1
[ÂÂÂ 7.955217] xen: --> pirq=16 -> irq=16 (gsi=16)
[ÂÂÂ 7.960116] xen: registering gsi 17 triggering 0 polarity 1
[ÂÂÂ 7.965928] xen: --> pirq=17 -> irq=17 (gsi=17)
[ÂÂÂ 7.970828] xen: registering gsi 18 triggering 0 polarity 1
[ÂÂÂ 7.976631] xen: --> pirq=18 -> irq=18 (gsi=18)
[ÂÂÂ 7.981534] xen: registering gsi 19 triggering 0 polarity 1
[ÂÂÂ 7.987355] xen: --> pirq=19 -> irq=19 (gsi=19)
[ 7.992271] pci_bus 0000:00: resource 4 [io 0x0000-0x006f]
[ 7.998221] pci_bus 0000:00: resource 5 [io 0x0078-0x0cf7]
[ 8.004163] pci_bus 0000:00: resource 6 [io 0x0d00-0xffff]
[ÂÂÂ 8.010135] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
[ÂÂÂ 8.016797] pci_bus 0000:00: resource 8 [mem 0x000c0000-0x000dffff]
[ÂÂÂ 8.023463] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000fffff]
[ÂÂÂ 8.030124] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xd0818ffe]
[ 8.036873] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ÂÂÂ 8.042840] pci_bus 0000:01: resource 1 [mem 0xd0700000-0xd07fffff]
[ 8.049482] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ÂÂÂ 8.055441] pci_bus 0000:02: resource 1 [mem 0xd0600000-0xd06fffff]
[ 8.062092] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 8.068043] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
[ÂÂÂ 8.073896] NET: Registered protocol family 2
[ÂÂÂ 8.079079] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[ÂÂÂ 8.087152] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ÂÂÂ 8.094267] TCP: Hash tables configured (established 32768 bind 32768)
[ÂÂÂ 8.101163] TCP: reno registered
[ÂÂÂ 8.104724] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ÂÂÂ 8.111085] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ÂÂÂ 8.117916] NET: Registered protocol family 1
[ÂÂÂ 8.122784] RPC: Registered named UNIX socket transport module.
[ÂÂÂ 8.128969] RPC: Registered udp transport module.
[ÂÂÂ 8.133928] RPC: Registered tcp transport module.
[ÂÂÂ 8.138944] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ÂÂÂ 8.145773] pci 0000:00:02.0: Boot video device
[ÂÂÂ 8.150884] xen: registering gsi 23 triggering 0 polarity 1
[ÂÂÂ 8.156721] xen: --> pirq=23 -> irq=23 (gsi=23)
[ÂÂÂ 8.172104] PCI: CLS 64 bytes, default 64
[ÂÂÂ 8.176473] Trying to unpack rootfs image as initramfs...
[ÂÂÂ 8.349690] Freeing initrd memory: 86356K (ffff880001e87000 - ffff8800072dc000)
[ÂÂÂ 8.362418] audit: initializing netlink socket (disabled)
[ÂÂÂ 8.368133] type=2000 audit(1452703134.553:1): initialized
[ÂÂÂ 8.420108] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ÂÂÂ 8.442656] VFS: Disk quotas dquot_6.5.2
[ÂÂÂ 8.447255] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ÂÂÂ 8.456181] NFS: Registering the id_resolver key type
[ÂÂÂ 8.461494] Key type id_resolver registered
[ÂÂÂ 8.465898] Key type id_legacy registered
[ÂÂÂ 8.470210] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
[ÂÂÂ 8.478422] msgmni has been set to 3789
[ÂÂÂ 8.486389] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ÂÂÂ 8.494087] io scheduler noop registered
[ÂÂÂ 8.498232] io scheduler deadline registered
[ÂÂÂ 8.503108] io scheduler cfq registered (default)
[ÂÂÂ 8.509351] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ÂÂÂ 8.516933] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ÂÂÂ 8.525405] ACPI: Power Button [PWRB]
[ÂÂÂ 8.529813] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ÂÂÂ 8.538278] ACPI: Sleep Button [SLPB]
[ÂÂÂ 8.542613] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ÂÂÂ 8.550288] ACPI: Power Button [PWRF]
[ÂÂÂ 8.554729] ACPI: Fan [FAN0] (off)
[ÂÂÂ 8.558797] ACPI: Requesting acpi_cpufreq
[ÂÂÂ 8.566110] Monitor-Mwait will be used to enter C-1 state
[ÂÂÂ 8.571801] Monitor-Mwait will be used to enter C-2 state
[ÂÂÂ 8.579212] Warning: Processor Platform Limit not supported.
[ÂÂÂ 8.586895] thermal LNXTHERM:00: registered as thermal_zone0
[ÂÂÂ 8.592792] ACPI: Thermal Zone [TZ01] (27 C)
[ÂÂÂ 8.599284] xen:xen_evtchn: Event-channel device installed
[ÂÂÂ 8.605438] xen_pciback: backend is vpci
[ÂÂÂ 8.612850] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ÂÂÂ 8.641008] 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ÂÂÂ 8.668267] 00:07: ttyS2 at I/O 0x3e8 (irq = 11) is a 16550A
[ÂÂÂ 8.695596] 00:08: ttyS3 at I/O 0x2e8 (irq = 10) is a 16550A
[ÂÂÂ 8.723445] 00:09: ttyS0 at I/O 0x228 (irq = 6) is a 16550A
[ÂÂÂ 8.730061] serial 00:0a: disabled
[ÂÂÂ 8.735272] xen: registering gsi 8 triggering 0 polarity 0
[ÂÂÂ 8.743145] Already setup the GSI :8
[ÂÂÂ 8.747015] hpet: number irqs doesn't agree with number of timers
[ÂÂÂ 8.754011] Non-volatile memory driver v1.3
[ÂÂÂ 8.758434] Linux agpgart interface v0.103
[ÂÂÂ 8.763174] [drm] Initialized drm 1.1.0 20060810
[ÂÂÂ 8.768000] Eddie: i915_initi915_init
[ÂÂÂ 8.771862] Eddie: -------------
[ÂÂÂ 8.775389] vGT info:(vgt_set_device_type:441) Detected Valleyview
[ÂÂÂ 8.783234] bar-0 size: 400000
[ÂÂÂ 8.786495] bar-1 size: 10000000
[ÂÂÂ 8.789908] bar-2 size: 10
[ÂÂÂ 8.792847] bar0: 0xd0000000, Bar1: 0xc0000008
[ÂÂÂ 8.797523] mmio size: 200000, gtt size: 200000
[ÂÂÂ 8.802290] gttmmio: 0xd0000000, gmadr: 0xc0000000
(XEN) DOM 0 IO rangeset:
(XEN) I/O Ports Self-forwarding { 3b0-3df }
(XEN) VGT(0): Add MMIO range [0xd0000000 - 0xd03ff000].
(XEN) vgt.c:263:d0 vGT: Setup MMIO range [0xd0000000 - 0xd03ff000](hva 0xffff8300d0000000) for trap. return 0
(XEN)
(XEN) vgt.c:270:d0 vGT: vgt_mmio_bar_start: 0xd0000000
(XEN)
(XEN) vgt.c:271:d0 vGT: vgt_mmio_hva: 0xffff8300d0000000
(XEN)
(XEN) DOM 0 MMIO rangeset:
(XEN) I/O Memory Forwarding { d0000-d03ff }
[ÂÂÂ 8.846275] VGT: vgt_io_trap: pio 0 [ 3b0 - 3df ]
[ÂÂÂ 8.851282] VGT: vgt_io_trap: mmio 0 [ d0000000 - d03ff000 ]
[ÂÂÂ 8.857200] VGT: install GP handler successfully
(XEN) vgt.c:289:d0 vGT: vgt_bdf=0x10, gen=4
(XEN)
(XEN) vgt.c:295:d0 vGT: Set default force wake
(XEN)
[ÂÂÂ 8.958603] gmadr_va: 0xffffc90010a00000
[ÂÂÂ 9.005846] vGT: GMBUS2 init value: 0, 800
[ÂÂÂ 9.011852] vGT info:(initialize_gm_fence_allocation_bitmaps:313) total aperture: 0x10000000 bytes, total GM space: 0x80000000 bytes
[ÂÂÂ 9.024309] vGT info:(initialize_gm_fence_allocation_bitmaps:334) reserved aperture: [0xcf800000, 0xd0000000)
[ÂÂÂ 9.034533] vGT: setup tracked reg info
[ÂÂÂ 9.039935] 860 listed, 441 used
[ÂÂÂ 9.043414] total 67664 registers tracked
[ÂÂÂ 9.047718] scratch page is allocated at gm(0xf800000)
[ÂÂÂ 9.053522] ------------[ cut here ]------------
[ÂÂÂ 9.058569] WARNING: CPU: 0 PID: 1 at drivers/xen/vgt/instance.c:122 create_vgt_instance+0x39/0xa3b()
[ÂÂÂ 9.068030] Modules linked in:
[ÂÂÂ 9.071450] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.11.6-vgt+ #14
[ÂÂÂ 9.078237] Hardware name: NEXCOM VTC1010/Aptio CRB, BIOS MV11B127 01/23/2015
[ÂÂÂ 9.085531]Â 0000000000000000 ffff88007629fbb0 ffffffff814f824d 0000000000000000
[ÂÂÂ 9.093331]Â ffff88007629fbe8 ffffffff81054832 ffffffff812ca6a6 ffffffff817e9d10
[ÂÂÂ 9.101131]Â ffff880076277000 0000000000000001 0000000000000000 ffff88007629fbf8
[ÂÂÂ 9.108966] Call Trace:
[ÂÂÂ 9.111697]Â [<ffffffff814f824d>] dump_stack+0x45/0x56
[ÂÂÂ 9.117153]Â [<ffffffff81054832>] warn_slowpath_common+0x7a/0x93
[ÂÂÂ 9.123464]Â [<ffffffff812ca6a6>] ? create_vgt_instance+0x39/0xa3b
[ÂÂÂ 9.129949]Â [<ffffffff810548ea>] warn_slowpath_null+0x15/0x17
[ÂÂÂ 9.136100]Â [<ffffffff812ca6a6>] create_vgt_instance+0x39/0xa3b
[ÂÂÂ 9.142402]Â [<ffffffff81377df6>] ? __class_create+0x4c/0x73
[ÂÂÂ 9.148361]Â [<ffffffff812a94f4>] vgt_initialize+0x664/0x892
[ÂÂÂ 9.154299]Â [<ffffffff812a976e>] xen_start_vgt+0x4c/0x53
[ÂÂÂ 9.160002]Â [<ffffffff8131cbfc>] i915_pci_probe+0x4e/0x7a
[ÂÂÂ 9.165792]Â [<ffffffff81247aec>] local_pci_probe+0x1a/0x2b
[ÂÂÂ 9.171663]Â [<ffffffff8124833f>] pci_device_probe+0xba/0xe0
[ÂÂÂ 9.177627]Â [<ffffffff81376e9e>] driver_probe_device+0x90/0x199
[ÂÂÂ 9.183928]Â [<ffffffff81377037>] __driver_attach+0x58/0x7a
[ÂÂÂ 9.189809]Â [<ffffffff81376fdf>] ? __device_attach+0x38/0x38
[ÂÂÂ 9.195869]Â [<ffffffff813755e8>] bus_for_each_dev+0x76/0x80
[ÂÂÂ 9.201829]Â [<ffffffff81376a69>] driver_attach+0x19/0x1b
[ÂÂÂ 9.207535]Â [<ffffffff813766af>] bus_add_driver+0x106/0x20e
[ÂÂÂ 9.213488]Â [<ffffffff813774e6>] driver_register+0x8a/0xfb
[ÂÂÂ 9.219453]Â [<ffffffff8188260f>] ? ftrace_define_fields_drm_vblank_event_delivered+0x99/0x99
[ÂÂÂ 9.228365]Â [<ffffffff81248151>] __pci_register_driver+0x46/0x48
[ÂÂÂ 9.234745]Â [<ffffffff8130def7>] drm_pci_init+0x81/0xe5
[ÂÂÂ 9.240454]Â [<ffffffff8188260f>] ? ftrace_define_fields_drm_vblank_event_delivered+0x99/0x99
[ÂÂÂ 9.249329]Â [<ffffffff81882691>] i915_init+0x82/0x84
[ÂÂÂ 9.254686]Â [<ffffffff8100209f>] do_one_initcall+0x7f/0x10e
[ÂÂÂ 9.260650]Â [<ffffffff8106d100>] ? param_array_set+0xef/0xf4
[ÂÂÂ 9.266693]Â [<ffffffff8106d269>] ? parse_args+0x10f/0x246
[ÂÂÂ 9.272504]Â [<ffffffff81847e9d>] kernel_init_freeable+0x141/0x1c6
[ÂÂÂ 9.278988]Â [<ffffffff8184776b>] ? do_early_param+0x88/0x88
[ÂÂÂ 9.284931]Â [<ffffffff814ef360>] ? rest_init+0x74/0x74
[ÂÂÂ 9.290429]Â [<ffffffff814ef369>] kernel_init+0x9/0xd1
[ÂÂÂ 9.295865]Â [<ffffffff81505f3c>] ret_from_fork+0x7c/0xb0
[ÂÂÂ 9.301555]Â [<ffffffff814ef360>] ? rest_init+0x74/0x74
[ÂÂÂ 9.307050] ---[ end trace 4d8a330e08fc473f ]---
[ÂÂÂ 9.312123] vGT info:(create_vgt_instance:125) vm_id=0, low_gm_sz=120MB, high_gm_sz=384MB, fence_sz=4, vgt_primary=1
[ÂÂÂ 9.324534] ------------[ cut here ]------------
[ÂÂÂ 9.329601] WARNING: CPU: 0 PID: 1 at drivers/xen/vgt/instance.c:52 create_vgt_instance+0xc0/0xa3b()
[ÂÂÂ 9.338966] Modules linked in:
[ÂÂÂ 9.342425] CPU: 0 PID: 1 Comm: swapper/0 Tainted: GÂÂÂÂÂÂÂ WÂÂÂ 3.11.6-vgt+ #14
[ÂÂÂ 9.350232] Hardware name: NEXCOM VTC1010/Aptio CRB, BIOS MV11B127 01/23/2015
[ÂÂÂ 9.357529]Â 0000000000000000 ffff88007629fbb0 ffffffff814f824d 0000000000000000
[ÂÂÂ 9.365355]Â ffff88007629fbe8 ffffffff81054832 ffffffff812ca72d ffffffff817e9d10
[ÂÂÂ 9.373165]Â ffff880076277000 0000000000000001 0000000000000000 ffff88007629fbf8
[ÂÂÂ 9.381011] Call Trace:
[ÂÂÂ 9.383739]Â [<ffffffff814f824d>] dump_stack+0x45/0x56
[ÂÂÂ 9.389190]Â [<ffffffff81054832>] warn_slowpath_common+0x7a/0x93
[ÂÂÂ 9.395511]Â [<ffffffff812ca72d>] ? create_vgt_instance+0xc0/0xa3b
[ÂÂÂ 9.402005]Â [<ffffffff810548ea>] warn_slowpath_null+0x15/0x17
[ÂÂÂ 9.408150]Â [<ffffffff812ca72d>] create_vgt_instance+0xc0/0xa3b
[ÂÂÂ 9.414449]Â [<ffffffff812a94f4>] vgt_initialize+0x664/0x892
[ÂÂÂ 9.420393]Â [<ffffffff812a976e>] xen_start_vgt+0x4c/0x53
[ÂÂÂ 9.426091]Â [<ffffffff8131cbfc>] i915_pci_probe+0x4e/0x7a
[ÂÂÂ 9.431885]Â [<ffffffff81247aec>] local_pci_probe+0x1a/0x2b
[ÂÂÂ 9.437758]Â [<ffffffff8124833f>] pci_device_probe+0xba/0xe0
[ÂÂÂ 9.443735]Â [<ffffffff81376e9e>] driver_probe_device+0x90/0x199
[ÂÂÂ 9.450040]Â [<ffffffff81377037>] __driver_attach+0x58/0x7a
[ÂÂÂ 9.455926]Â [<ffffffff81376fdf>] ? __device_attach+0x38/0x38
[ÂÂÂ 9.461987]Â [<ffffffff813755e8>] bus_for_each_dev+0x76/0x80
[ÂÂÂ 9.467934]Â [<ffffffff81376a69>] driver_attach+0x19/0x1b
[ÂÂÂ 9.473629]Â [<ffffffff813766af>] bus_add_driver+0x106/0x20e
[ÂÂÂ 9.479580]Â [<ffffffff813774e6>] driver_register+0x8a/0xfb
[ÂÂÂ 9.485547]Â [<ffffffff8188260f>] ? ftrace_define_fields_drm_vblank_event_delivered+0x99/0x99
[ÂÂÂ 9.494456]Â [<ffffffff81248151>] __pci_register_driver+0x46/0x48
[ÂÂÂ 9.500842]Â [<ffffffff8130def7>] drm_pci_init+0x81/0xe5
[ÂÂÂ 9.506542]Â [<ffffffff8188260f>] ? ftrace_define_fields_drm_vblank_event_delivered+0x99/0x99
[ÂÂÂ 9.515421]Â [<ffffffff81882691>] i915_init+0x82/0x84
[ÂÂÂ 9.520772]Â [<ffffffff8100209f>] do_one_initcall+0x7f/0x10e
[ÂÂÂ 9.526740]Â [<ffffffff8106d100>] ? param_array_set+0xef/0xf4
[ÂÂÂ 9.532775]Â [<ffffffff8106d269>] ? parse_args+0x10f/0x246
[ÂÂÂ 9.538580]Â [<ffffffff81847e9d>] kernel_init_freeable+0x141/0x1c6
[ÂÂÂ 9.545061]Â [<ffffffff8184776b>] ? do_early_param+0x88/0x88
[ÂÂÂ 9.551002]Â [<ffffffff814ef360>] ? rest_init+0x74/0x74
[ÂÂÂ 9.556503]Â [<ffffffff814ef369>] kernel_init+0x9/0xd1
[ÂÂÂ 9.561934]Â [<ffffffff81505f3c>] ret_from_fork+0x7c/0xb0
[ÂÂÂ 9.567623]Â [<ffffffff814ef360>] ? rest_init+0x74/0x74
[ÂÂÂ 9.573111] ---[ end trace 4d8a330e08fc4740 ]---
[ÂÂÂ 9.578049] vGT error:(allocate_vgt_id:53) vgt_id_alloc_bitmap = 0
[ÂÂÂ 9.584543] vGT error:(allocate_vgt_id:64) vgt_id_alloc_bitmap = 1
[ÂÂÂ 9.594087] vGT info:(create_vgt_instance:181) Virtual GTT size: 0x200000
[ÂÂÂ 9.602613] VM0 Ring0 context_save_area is allocated at gm(f80d000)
[ÂÂÂ 9.609403] VM0 Ring1 context_save_area is allocated at gm(f84d000)
[ÂÂÂ 9.616199] VM0 Ring2 context_save_area is allocated at gm(f88d000)
[ÂÂÂ 9.623185] vGT info:(create_vgt_instance:217) aperture: [0xc0000000, 0xc77fffff] guest [0xc0000000, 0xc77fffff] va(0xffffc90010a00000)
[ÂÂÂ 9.636001] vGT info:(create_vgt_instance:228) GM: [0x0, 0x77fffff], [0x10000000, 0x27ffffff], guest[0x0, 0x77fffff], [0x10000000, 0x27ffffff]
[ÂÂÂ 9.653524] vGT info:(create_vgt_instance:265) filling VGT_PVINFO_PAGE for dom0:
[ÂÂÂ 9.653524]ÂÂÂ visable_gm_base=0x0, size=0x7800000
[ÂÂÂ 9.653524]ÂÂÂ hidden_gm_base=0x10000000, size=0x18000000
[ÂÂÂ 9.653524]ÂÂÂ fence_base=0, num=4
[ÂÂÂ 9.675393] vGT(0): create debugfs node: virtual_mmio_space
[ÂÂÂ 9.681269] vGT(0): create debugfs node: shadow_mmio_space
[ÂÂÂ 9.687059] vGT(0): create debugfs node: frame_buffer_format
[ÂÂÂ 9.693024] vGT(0): create debugfs node: frame_buffer_format
[ÂÂÂ 9.704473] vGT: clear all GTT entries.
[ÂÂÂ 9.708592] ....dummy page (0x6376000, 0x1c0000)
[ÂÂÂ 9.953033] vGT: allocate vGT aperture
[ÂÂÂ 9.968557] Eddie: xen_vgt_dom0_ready ffffc90020e03000
[ÂÂÂ 9.974289] vgt_initialize succeeds.
[ÂÂÂ 9.978117] i915: xen_start_vgt done
[ÂÂÂ 9.978249] vGT: start kthread for dev (0, 10)
[ÂÂÂ 9.986877] xen: registering gsi 16 triggering 0 polarity 1
[ÂÂÂ 9.992690] Already setup the GSI :16
[ÂÂÂ 9.999535] [drm] Memory usable by graphics device = 2048M
[ÂÂ 10.005473] i915 0000:00:02.0: setting latency timer to 64
[ÂÂ 10.099052] Failed to add WC MTRR for [00000000c0000000-00000000cfffffff]; performance may suffer.i915: intel_detect_pch
[ÂÂ 10.110669] i915: find pch with devfn(f8), device(f1c)
[ÂÂ 10.117940] i915: the number of the fence registers (4)
[ÂÂ 10.123671] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ÂÂ 10.130595] [drm] Driver supports precise vblank timestamp query.
[ÂÂ 10.137130] vGT: setup vGT irq hook in valleyview_irq_preinstall
[ÂÂ 10.143484] vGT: found matching pgt_device when registering irq for dev (0x10)
[ÂÂ 10.151205] vGT: allocate virq (119) for i915, while keep original irq (118) for vgt
[ÂÂ 10.159249] vGT: track_nest: enabled
[ÂÂ 10.163399] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ÂÂ 10.180326] Eddie: mappable_end 10000000
[ÂÂ 10.184470] i915 ballooning.
[ÂÂ 10.187589] Ballooning configuration:
[ÂÂ 10.191502] Low GM: base 0x0 size 122880KB
[ÂÂ 10.195879] High GM: base 0x10000000 size 393216KB
[ÂÂ 10.200979] i915_balloon_space: start 0x27fff000 end 0x80000000
[ÂÂ 10.207142] free_space ffff880005ba6150
[ÂÂ 10.211211] free_space ffff880005ba6150
[ÂÂ 10.215301]Â bl_info.space[3] = ffff880070bc3b40
[ÂÂ 10.220214] i915_balloon_space: start 0x77ff000 end 0x10000000
[ÂÂ 10.226286] free_space ffff880005ba6150
[ÂÂ 10.232487] free_space ffff880005ba6150
[ÂÂ 10.236576]Â bl_info.space[1] = ffff880070bc3ba0
[ÂÂ 10.241404] balloon successfully
[ÂÂ 10.728915] vGT: activate vgt (0) on ring (0)
[ÂÂ 10.733523] vGT-0: add to render run queue!
[ÂÂ 10.760598] vGT: activate vgt (0) on ring (1)
[ÂÂ 10.765748] vGT: activate vgt (0) on ring (2)
[ÂÂ 10.770512] Ring-0 starts work for vgt-0
[ÂÂ 10.775215] vGT warning:(pch_adpa_mmio_write:1174) HOTPLUG_FORCE_TRIGGER is set while VGA is enabled!
[ÂÂ 10.905034] [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
[ÂÂ 10.939016] fbcon: inteldrmfb (fb0) is primary device
[ÂÂ 10.953408] ironlake_update_plane
[ÂÂ 10.953849] vGT warning:(vgt_emulate_read:355) vGT: untracked MMIO read: vm_id(0), offset=0x61204,len=4, val=0x0!!! base_off=0x0
[ÂÂ 10.954202] vGT warning:(vgt_emulate_read:355) vGT: untracked MMIO read: vm_id(0), offset=0x61180,len=4, val=0x0!!! base_off=0x0
[ÂÂ 10.972940] i915: intel_flush_display_plane
[ÂÂ 10.991438] vGT error:(vgt_signal_uevent:372) vgt_signal_uevent: 372: vGT: failed to send uevent [VGT detect PORT A]!
[ÂÂ 10.991845] vGT error:(vgt_signal_uevent:372) vgt_signal_uevent: 372: vGT: failed to send uevent [VGT detect PORT B]!
[ÂÂ 10.992281] vGT error:(vgt_signal_uevent:372) vgt_signal_uevent: 372: vGT: failed to send uevent [VGT detect PORT C]!
[ÂÂ 10.992678] vGT error:(vgt_signal_uevent:372) vgt_signal_uevent: 372: vGT: failed to send uevent [VGT detect PORT D]!
[ÂÂ 10.993099] vGT error:(vgt_signal_uevent:372) vgt_signal_uevent: 372: vGT: failed to send uevent [VGT detect PORT E]!
[ÂÂ 10.993490] vGT error:(vgt_signal_uevent:372) vgt_signal_uevent: 372: vGT: failed to send uevent [VGT detect PORT A]!
[ÂÂ 11.281785] vGT error:(vgt_signal_uevent:372) vgt_signal_uevent: 372: vGT: failed to send uevent [VGT detect PORT A]!
[ÂÂ 11.282229] vGT error:(vgt_signal_uevent:372) vgt_signal_uevent: 372: vGT: failed to send uevent [VGT detect PORT B]!
[ÂÂ 11.282626] vGT error:(vgt_signal_uevent:372) vgt_signal_uevent: 372: vGT: failed to send uevent [VGT detect PORT C]!
[ÂÂ 11.283075] vGT error:(vgt_signal_uevent:372) vgt_signal_uevent: 372: vGT: failed to send uevent [VGT detect PORT D]!
[ÂÂ 11.283470] vGT error:(vgt_signal_uevent:372) vgt_signal_uevent: 372: vGT: failed to send uevent [VGT detect PORT E]!
[ÂÂ 11.566822] Console: switching to colour frame buffer device 240x67
[ÂÂ 11.569433] vGT error:(vgt_signal_uevent:372) vgt_signal_uevent: 372: vGT: failed to send uevent [VGT detect PORT A]!
[ÂÂ 11.604091] vGT error:(vgt_signal_uevent:372) vgt_signal_uevent: 372: vGT: failed to send uevent [VGT detect PORT B]!
[ÂÂ 11.604500] vGT error:(vgt_signal_uevent:372) vgt_signal_uevent: 372: vGT: failed to send uevent [VGT detect PORT C]!
[ÂÂ 11.604887] vGT error:(vgt_signal_uevent:372) vgt_signal_uevent: 372: vGT: failed to send uevent [VGT detect PORT D]!
[ÂÂ 11.605287] vGT error:(vgt_signal_uevent:372) vgt_signal_uevent: 372: vGT: failed to send uevent [VGT detect PORT E]!
[ÂÂ 12.090527] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ÂÂ 12.098191] i915 0000:00:02.0: registered panic notifier
[ÂÂ 12.105169] vGT error:(vgt_signal_uevent:372) vgt_signal_uevent: 372: vGT: failed to send uevent [VGT detect PORT A]!
[ÂÂ 12.118592] vGT error:(vgt_signal_uevent:372) vgt_signal_uevent: 372: vGT: failed to send uevent [VGT detect PORT B]!
[ÂÂ 12.132028] vGT error:(vgt_signal_uevent:372) vgt_signal_uevent: 372: vGT: failed to send uevent [VGT detect PORT C]!
[ÂÂ 12.145455] vGT error:(vgt_signal_uevent:372) vgt_signal_uevent: 372: vGT: failed to send uevent [VGT detect PORT D]!
[ÂÂ 12.145705] acpi device:0a: registered as cooling_device3
[ 12.145976] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ÂÂ 12.146427] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input3
[ÂÂ 12.146765] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ÂÂ 12.193357] vGT error:(vgt_signal_uevent:372) vgt_signal_uevent: 372: vGT: failed to send uevent [VGT detect PORT E]!
[ÂÂ 12.215238] brd: module loaded
[ÂÂ 12.219475] ahci 0000:00:13.0: version 3.0
[ÂÂ 12.224713] xen: registering gsi 19 triggering 0 polarity 1
[ÂÂ 12.231511] Already setup the GSI :19
[ÂÂ 12.247205] ahci 0000:00:13.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x1 impl SATA mode
[ÂÂ 12.257276] ahci 0000:00:13.0: flags: 64bit ncq pm led clo pio slum part deso sadm sds
[ÂÂ 12.267162] ahci 0000:00:13.0: setting latency timer to 64
[ÂÂ 12.275696] scsi0 : ahci
[ÂÂ 12.279475] scsi1 : ahci
[ÂÂ 12.283610] ata1: SATA max UDMA/133 abar m2048@0xd0816000 port 0xd0816100 irq 120
[ÂÂ 12.342663] ata2: DUMMY
[ÂÂ 12.399378] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ÂÂ 12.490992] [drm:valleyview_enable_rps] *ERROR* GT fifo had a previous error 10
[ÂÂ 12.700935] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ÂÂ 13.519850] i8042: No controller found
[ÂÂ 13.576591] ata1.00: ATA-9: INTEL SSDSC2BW080A4, DC32, max UDMA/133
[ÂÂ 13.636563] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ÂÂ 13.698732] mousedev: PS/2 mouse device common for all mice
[ÂÂ 13.761502] rtc_cmos 00:00: RTC can wake from S4
[ÂÂ 13.821510] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[ÂÂ 13.882815] rtc_cmos 00:00: alarms up to one month, y3k, 242 bytes nvram
[ÂÂ 13.945787] hidraw: raw HID events driver (C) Jiri Kosina
[ÂÂ 13.955887] ata1.00: configured for UDMA/133
[ÂÂ 13.956402] scsi 0:0:0:0: Direct-AccessÂÂÂÂ ATAÂÂÂÂÂ INTEL SSDSC2BW08 DC32 PQ: 0 ANSI: 5
[ÂÂ 14.136284] usbcore: registered new interface driver usbhid
[ÂÂ 14.198847] usbhid: USB HID core driver
[ÂÂ 14.259398] TCP: cubic registered
[ÂÂ 14.318126] NET: Registered protocol family 17
[ÂÂ 14.378554] sctp: Hash tables configured (established 65536 bind 65536)
[ÂÂ 14.440274] Key type dns_resolver registered
[ÂÂ 14.501827] PM: Hibernation image not present or could not be loaded.
[ÂÂ 14.561807] registered taskstats version 1
[ÂÂ 14.620612]ÂÂ Magic number: 0:224:641
[ÂÂ 14.678155] Freeing unused kernel memory: 996K (ffffffff81832000 - ffffffff8192b000)
Loading, please wait...
[ÂÂ 14.814778] systemd-udevd[902]: starting version 204
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
[ÂÂ 14.970435] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ÂÂ 15.029516] sd 0:0:0:0: [sda] Write Protect is off
[ÂÂ 15.031811] pps_core: LinuxPPS API ver. 1 registered
[ÂÂ 15.032105] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@xxxxxxxx>
[ÂÂ 15.033363] PTP clock support registered
[ÂÂ 15.034756] dca service started, version 1.12.1
[ÂÂ 15.044763] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k
[ÂÂ 15.044919] igb: Copyright (c) 2007-2013 Intel Corporation.
[ÂÂ 15.045198] xen: registering gsi 16 triggering 0 polarity 1
[ÂÂ 15.045282] Already setup the GSI :16
[ÂÂ 15.597366] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ÂÂ 15.663180] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ÂÂ 15.736446] igb 0000:01:00.0: added PHC on eth0
[ÂÂ 15.803796] igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection
[ÂÂ 15.805233]Â sda: sda1 sda2 < sda5 >
[ÂÂ 15.806345] sd 0:0:0:0: [sda] Attached SCSI disk
[ÂÂ 16.009936] igb 0000:01:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 00:10:f3:48:1e:00
[ÂÂ 16.075282] igb 0000:01:00.0: eth0: PBA No: 001300-000
Begin: Running /scripts/local-premount ... [ÂÂ 16.142262] igb 0000:01:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s)
done.
[ÂÂ 16.217027] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Begin: Running /scripts/local-bottom ... done.
done.
Begin: Running /scripts/init-bottom ... done.
[ÂÂ 16.632368] init: plymouth-upstart-bridge main process (953) terminated with status 1
[ÂÂ 16.701873] init: plymouth-upstart-bridge main process ended, respawning
[ÂÂ 16.816329] init: plymouth-upstart-bridge main process (963) terminated with status 1
[ÂÂ 16.889021] init: plymouth-upstart-bridge main process ended, respawning
[ÂÂ 17.004693] init: plymouth-upstart-bridge main process (972) terminated with status 1
[ÂÂ 17.075864] init: plymouth-upstart-bridge main process ended, respawning
[ 17.743603] Adding 4052988k swap on /dev/sda5. Priority:-1 extents:1 across:4052988k SS
[ÂÂ 18.410669] systemd-udevd[1105]: starting version 204
[ÂÂ 18.817381] lp: driver loaded but no devices found
[ÂÂ 19.136593] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ÂÂ 19.213040] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ÂÂ 19.338103] microcode: CPU0 sig=0x30679, pf=0x1, revision=0x901
[ÂÂ 19.472630] device-mapper: uevent: version 1.0.3
[ÂÂ 19.606888] ppdev: user-space parallel port driver
[ÂÂ 19.663500] ehci-pci: EHCI PCI platform driver
[ÂÂ 19.712969] systemd-udevd[1148]: Error running install command for snd
[ÂÂ 19.745766] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@xxxxxxxxxx
[ÂÂ 19.771218] device-mapper: multipath: version 1.5.1 loaded
[ÂÂ 19.809718] fuse init (API version 7.22)
[ÂÂ 19.878236] xen: registering gsi 22 triggering 0 polarity 1
[ÂÂ 19.878378] xen: --> pirq=22 -> irq=22 (gsi=22)
[ÂÂ 19.878846] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ÂÂ 20.524842] systemd-udevd[1148]: 'socket:/org/xen/xend/udev_event' [1334] terminated by signal 47 (Real-time signal 13)
[ÂÂ 20.603468] systemd-udevd[1334]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
[ÂÂ 20.664539] microcode: CPU1 sig=0x30679, pf=0x1, revision=0x901
[ÂÂ 20.765924] systemd-udevd[1148]: '/bin/sh -c '/usr/bin/vgt_mgr --detect-display PORT_A'' [1341] terminated by signal 81 (Unknown signal 81)
[ÂÂ 20.881777] systemd-udevd[1148]: '/bin/sh -c '/usr/bin/vgt_mgr --detect-display PORT_B'' [1360] terminated by signal 81 (Unknown signal 81)
[ÂÂ 21.067307] microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
[ÂÂ 21.223814] xen: registering gsi 23 triggering 0 polarity 1
[ÂÂ 21.223973] Already setup the GSI :23
[ÂÂ 21.224848] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ÂÂ 21.225132] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ÂÂ 21.225680] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ÂÂ 21.225968] ehci-pci 0000:00:1d.0: debug port 2
[ÂÂ 21.233911] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ÂÂ 21.234216] ehci-pci 0000:00:1d.0: irq 23, io mem 0xd0810000
[ÂÂ 21.290003] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ÂÂ 21.290301] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ÂÂ 21.290571] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ÂÂ 21.290775] usb usb1: Product: EHCI Host Controller
[ÂÂ 21.291018] usb usb1: Manufacturer: Linux 3.11.6-vgt+ ehci_hcd
[ÂÂ 21.291211] usb usb1: SerialNumber: 0000:00:1d.0
[ÂÂ 21.291650] hub 1-0:1.0: USB hub found
[ÂÂ 21.291846] hub 1-0:1.0: 8 ports detected
[ÂÂ 21.675982] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ÂÂ 22.243198] usb 1-1: New USB device found, idVendor=8087, idProduct=07e6
[ÂÂ 22.243468] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ÂÂ 22.306715] hub 1-1:1.0: USB hub found
[ÂÂ 22.369960] hub 1-1:1.0: 4 ports detected
[ÂÂ 22.571654] systemd-udevd[1366]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
[ÂÂ 22.653478] init: bluetooth main process (1277) terminated with status 1
[ÂÂ 22.751010] init: bluetooth main process ended, respawning
[ÂÂ 22.826726] systemd-udevd[1392]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
[ÂÂ 22.958189] usb 1-1.1: new high-speed USB device number 3 using ehci-pci
[ÂÂ 23.198672] usb 1-1.1: New USB device found, idVendor=1a40, idProduct=0101
[ÂÂ 23.265874] usb 1-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ÂÂ 23.333628] usb 1-1.1: Product: USB 2.0 Hub
[ÂÂ 23.539241] hub 1-1.1:1.0: USB hub found
[ÂÂ 23.540031] hub 1-1.1:1.0: 4 ports detected
[ÂÂ 23.624067] usb 1-1.4: new high-speed USB device number 4 using ehci-pci
[ÂÂ 23.711824] usb 1-1.4: New USB device found, idVendor=05e3, idProduct=0608
[ÂÂ 23.712136] usb 1-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ÂÂ 23.712311] usb 1-1.4: Product: USB2.0 Hub
[ÂÂ 23.713722] hub 1-1.4:1.0: USB hub found
[ÂÂ 23.714366] hub 1-1.4:1.0: 4 ports detected
[ÂÂ 23.752928] systemd-udevd[1460]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
[ÂÂ 23.773872] systemd-udevd[1478]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
[ÂÂ 23.824335] usb 1-1.1.1: new low-speed USB device number 5 using ehci-pci
[ÂÂ 23.914695] usb 1-1.1.1: New USB device found, idVendor=15d9, idProduct=0a33
[ÂÂ 23.915001] usb 1-1.1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ÂÂ 23.915173] usb 1-1.1.1: Product: USB Mouse
[ÂÂ 23.918864] input: USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.1/1-1.1.1/1-1.1.1:1.0/input/input4
[ÂÂ 23.920246] hid-generic 0003:15D9:0A33.0001: input,hidraw0: USB HID v1.10 Mouse [USB Mouse] on usb-0000:00:1d.0-1.1.1/input0
[ÂÂ 23.995236] usb 1-1.1.4: new low-speed USB device number 6 using ehci-pci
[ÂÂ 24.103073] usb 1-1.1.4: New USB device found, idVendor=03f0, idProduct=034a
[ÂÂ 24.103360] usb 1-1.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ÂÂ 24.103568] usb 1-1.1.4: Product: HP Elite USB Keyboard
[ÂÂ 24.103757] usb 1-1.1.4: Manufacturer: Chicony
[ÂÂ 24.113800] input: Chicony HP Elite USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.1/1-1.1.4/1-1.1.4:1.0/input/input5
[ÂÂ 24.115062] hid-generic 0003:03F0:034A.0002: input,hidraw1: USB HID v1.10 Keyboard [Chicony HP Elite USB Keyboard] on usb-0000:00:1d.0-1.1.4/input0
[ÂÂ 24.126129] input: Chicony HP Elite USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.1/1-1.1.4/1-1.1.4:1.1/input/input6
[ÂÂ 24.127137] hid-generic 0003:03F0:034A.0003: input,hidraw2: USB HID v1.10 Device [Chicony HP Elite USB Keyboard] on usb-0000:00:1d.0-1.1.4/input1
[ÂÂ 24.209443] usb 1-1.4.1: new full-speed USB device number 7 using ehci-pci
[ÂÂ 24.238380] systemd-udevd[1500]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
[ÂÂ 24.266106] systemd-udevd[1501]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
[ÂÂ 24.288477] usb 1-1.4.1: New USB device found, idVendor=8087, idProduct=07dc
[ÂÂ 24.288771] usb 1-1.4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ÂÂ 24.365405] usb 1-1.4.3: new full-speed USB device number 8 using ehci-pci
[ÂÂ 24.443069] usb 1-1.4.3: New USB device found, idVendor=0483, idProduct=91d1
[ÂÂ 24.443356] usb 1-1.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ÂÂ 24.443541] usb 1-1.4.3: Product: ST_SENSOR_HUB
[ÂÂ 24.443762] usb 1-1.4.3: Manufacturer: STMicroelectronics
[ÂÂ 24.443980] usb 1-1.4.3: SerialNumber: ST_SENSOR_HUB
[ÂÂ 25.440921] systemd-udevd[1534]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
[ÂÂ 25.453618] systemd-udevd[1535]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
[ÂÂ 26.018630] systemd-udevd[1537]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
[ÂÂ 26.082659] systemd-udevd[1538]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
[ÂÂ 26.604223] init: bluetooth main process (1437) terminated with status 1
[ÂÂ 26.678965] init: bluetooth main process ended, respawning
Â* Starting Mount filesystems on boot[ OK ]
Â* Starting Signal sysvinit that the rootfs is mounted[ OK ]
Â* Starting Populate and link to /run filesystem[ OK ]
Â* Stopping Populate and link to /run filesystem[ OK ]
Â* Starting Clean /tmp directory[ OK ]
Â* Stopping Track if upstart is running in a container[ OK ]
Â* Stopping Read required files in advance[ OK ]
Â* Starting Initialize or finalize resolvconf[ OK ]
Â* Stopping Clean /tmp directory[ OK ]
Â* Starting set console keymap[ OK ]
Â* Starting Signal sysvinit that virtual filesystems are mounted[ OK ]
Â* Starting Signal sysvinit that virtual filesystems are mounted[ OK ]
Â* Starting Bridge udev events into upstart[ OK ]
Â* Starting Signal sysvinit that remote filesystems are mounted[ OK ]
Â* Stopping set console keymap[ OK ]
Â* Starting device node and kernel event manager[ OK ]
Â* Starting Signal sysvinit that local filesystems are mounted[ OK ]
Â* Starting load modules from /etc/modules[ OK ]
Â* Starting cold plug devices[ OK ]
Â* Starting log initial device creation[ OK ]
Â* Stopping Mount filesystems on boot[ OK ]
Â* Starting flush early job output to logs[ OK ]
Â* Starting NFSv4 id <-> name mapper[ OK ]
Â* Stopping flush early job output to logs[ OK ]
Â* Starting D-Bus system message bus[ OK ]
Â* Stopping load modules from /etc/modules[ OK ]
Â* Stopping rpcsec_gss daemon[ OK ]
Â* Starting system logging daemon[ OK ]
Â* Starting SystemD login management service[ OK ]
Â* Starting mDNS/DNS-SD daemon[ OK ]
Â* Starting Reload cups, upon starting avahi-daemon to make sure remote queues are populated[ OK ]
Â* Starting CUPS printing spooler/server[ OK ]
Â* Starting load fallback graphics devices[ OK ]
Â* Starting set console font[ OK ]
Â* Stopping Reload cups, upon starting avahi-daemon to make sure remote queues are populated[ OK ]
Â* Starting bluetooth * Starting Uncomplicated firewall[ OK ]
Â* Starting configure network device security[ OK ]
Â* Stopping cold plug devices[ OK ]
Â* Starting Send an event to indicate plymouth is up[ OK ]
Â* Stopping log initial device creation[ OK ]
Â* Starting configure network device[ OK ]
Â* Starting configure network device security[ OK ]
Â* Stopping userspace bootsplash[ OK ]
Â* Stopping Send an event to indicate plymouth is up[ OK ]
[ÂÂ 27.985367] init: bluetooth main process (1616) terminated with status 1
[ÂÂ 28.003974] init: bluetooth main process ended, respawning
Â* Starting configure network device security[ OK ]
Â* Starting configure network device[ OK ]
Â* Starting Mount network filesystems[ OK ]
Â* Starting Upstart job to start rpcbind on boot only[ OK ]
[ÂÂ 28.675412] init: failsafe main process (1692) killed by TERM signal
Â* Stopping Failsafe Boot Delay[ OK ]
[ÂÂ 28.698757] init: bluetooth main process (1687) terminated with status 1
[ÂÂ 28.708095] init: bluetooth main process ended, respawning
Â* Stopping Upstart job to start rpcbind on boot only[ OK ]
Â* Starting System V initialisation compatibility[ OK ]
Â* Starting modem connection manager[ OK ]
Â* Starting configure network device security[ OK ]
[ OK ]ting up X socket directories...ÂÂÂÂÂÂÂ
Â* Starting network connection manager[ OK ]
[ÂÂ 29.423162] init: bluetooth main process (1816) terminated with status 1
[ÂÂ 29.435629] init: bluetooth main process ended, respawning
Â* Stopping System V initialisation compatibility[ OK ]
[ÂÂ 30.446053] vGT warning:(pch_adpa_mmio_write:1174) HOTPLUG_FORCE_TRIGGER is set while VGA is enabled!
Â* Starting RPC portmapper replacement[ OK ]
[ÂÂ 30.775439] init: Failed to obtain startpar-bridge instance: Unknown parameter: INSTANCE
Â* Stopping Mount network filesystems[ OK ]
Â* speech-dispatcher disabled; edit /etc/default/speech-dispatcher
Â* Starting System V runlevel compatibility[ OK ]
Â* Starting thermal daemon[ OK ]
Â* Starting save kernel messages[ OK ]
Â* Starting OpenSSH server[ OK ]
[ÂÂ 31.707294] xen_acpi_processor: Uploading Xen processor PM info

Â* Starting anac(h)ronistic cron[ OK ]
Â* Starting ACPI daemon[ OK ]
Â* Starting regular background program processing daemon[ OK ]
(XEN) Monitor-Mwait will be used to enter C1 state
(XEN) Monitor-Mwait will be used to enter C2 state
(XEN) Monitor-Mwait will be used to enter C3 state
[ÂÂ 32.230476] init: bluetooth main process (2066) terminated with status 1
[ÂÂ 32.230655] init: bluetooth main process ended, respawning
[ÂÂ 32.747926] igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
Â* Stopping save kernel messages[ OK ]
Â* Stopping anac(h)ronistic cron[ OK ]
Starting C xenstored...
Setting domain 0 name...
Starting xenconsoled...
Starting QEMU as disk backend for dom0
Â* Starting configure virtual network devices[ OK ]
Â* Starting CPU interrupts balancing daemon[ OK ]
Â* Starting NSM status monitor[ OK ]
Â* Starting automatic crash report generation[ OK ]
[ÂÂ 33.328164] init: bluetooth main process (2210) terminated with status 1
[ÂÂ 33.328337] init: bluetooth main process ended, respawning
Â* Stopping Restore Sound Card State[ OK ]
Â* Starting bluetooth daemon[ OK ]
[ÂÂ 33.898249] init: bluetooth main process (2234) terminated with status 1
[ÂÂ 33.898434] init: bluetooth main process ended, respawning
[ÂÂ 34.401981] init: plymouth-upstart-bridge main process ended, respawning
(XEN) VGT: PHYSDEVOP_set_iopl iopl 3
[ÂÂ 34.897426] init: bluetooth main process (2269) terminated with status 1
[ÂÂ 34.904540] init: bluetooth main process ended, respawning
[ÂÂ 34.924132] vGT error:(vgt_decode_fb_format:440) pdev->gen_dev_type = 4
[ÂÂ 34.930940] vGT error:(vgt_decode_fb_format:441) vmid = 0
[ÂÂ 34.936466] ------------[ cut here ]------------
[ÂÂ 34.941407] WARNING: CPU: 0 PID: 2263 at drivers/xen/vgt/fb_decoder.c:442 vgt_decode_fb_format+0x6d/0x39f()
[ÂÂ 34.951159] Modules linked in: xen_acpi_processor xen_netback xen_blkback xen_gntalloc xen_gntdev coretemp snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwded
[ÂÂ 34.985458] CPU: 0 PID: 2263 Comm: Xorg Tainted: GÂÂÂÂÂÂÂ WÂÂÂ 3.11.6-vgt+ #14
[ÂÂ 34.992899] Hardware name: NEXCOM VTC1010/Aptio CRB, BIOS MV11B127 01/23/2015
[ÂÂ 35.000045]Â 0000000000000000 ffff880071953cb8 ffffffff814f824d 0000000000000000
[ÂÂ 35.007621]Â ffff880071953cf0 ffffffff81054832 ffffffff812cda32 ffff880070b4c184
[ÂÂ 35.015212]Â ffff8800044f0a00 ffff880075dbc800 0000000000000000 ffff880071953d00
[ÂÂ 35.022854] Call Trace:
[ÂÂ 35.025469]Â [<ffffffff814f824d>] dump_stack+0x45/0x56
[ÂÂ 35.030786]Â [<ffffffff81054832>] warn_slowpath_common+0x7a/0x93
[ÂÂ 35.036981]Â [<ffffffff812cda32>] ? vgt_decode_fb_format+0x6d/0x39f
[ÂÂ 35.043410]Â [<ffffffff810548ea>] warn_slowpath_null+0x15/0x17
[ÂÂ 35.049418]Â [<ffffffff812cda32>] vgt_decode_fb_format+0x6d/0x39f
[ÂÂ 35.055716]Â [<ffffffff81121bd4>] ? kmem_cache_alloc_trace+0x85/0xee
[ÂÂ 35.062250]Â [<ffffffff81337bac>] i915_gem_vgtbuffer_ioctl+0xca/0x703
[ÂÂ 35.068847]Â [<ffffffff813072a8>] drm_ioctl+0x2ef/0x41f
[ÂÂ 35.074317]Â [<ffffffff81337ae2>] ? i915_gem_vgtbuffer_mn_invalidate_range_start+0xce/0xce
[ÂÂ 35.082759]Â [<ffffffff8113fb68>] ? mntput_no_expire+0x75/0x10f
[ÂÂ 35.088822]Â [<ffffffff81135ed6>] vfs_ioctl+0x18/0x34
[ÂÂ 35.094051]Â [<ffffffff8113668b>] do_vfs_ioctl+0x328/0x3dd
[ÂÂ 35.099676]Â [<ffffffff81129859>] ? ____fput+0x9/0xb
[ÂÂ 35.104800]Â [<ffffffff8106c49f>] ? task_work_run+0x7d/0x8e
[ÂÂ 35.110512]Â [<ffffffff81136792>] SyS_ioctl+0x52/0x7d
[ÂÂ 35.115734]Â [<ffffffff81502ac7>] ? do_page_fault+0x9/0xb
[ÂÂ 35.121335]Â [<ffffffff81505fe9>] system_call_fastpath+0x16/0x1b

Ubuntu 14.04.3 LTS vtc-VTC1010 hvc0

vtc-VTC1010 login: [ÂÂ 36.462488] init: bluetooth main process (2486) terminated with status 1
[ÂÂ 36.479957] init: bluetooth main process ended, respawning
[ÂÂ 36.495310] ------------[ cut here ]------------
[ÂÂ 36.500320] WARNING: CPU: 1 PID: 2490 at drivers/gpu/drm/i915/i915_gem_context.c:536 i915_gem_context_create_ioctl+0x2d/0xb8()
[ÂÂ 36.511718] Modules linked in: xen_acpi_processor xen_netback xen_blkback xen_gntalloc xen_gntdev coretemp snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwded
[ÂÂ 36.545982] CPU: 1 PID: 2490 Comm: unity_support_t Tainted: GÂÂÂÂÂÂÂ WÂÂÂ 3.11.6-vgt+ #14
[ÂÂ 36.547521] init: plymouth-stop pre-start process (2516) terminated with status 1
[ÂÂ 36.561894] Hardware name: NEXCOM VTC1010/Aptio CRB, BIOS MV11B127 01/23/2015
[ÂÂ 36.569034]Â 0000000000000000 ffff880075919d50 ffffffff814f824d 0000000000000000
[ÂÂ 36.576596]Â ffff880075919d88 ffffffff81054832 ffffffff81332c77 ffff880075dbc800
[ÂÂ 36.584215]Â ffff880005ba4000 ffff8800040dd4e0 ffff880075919e10 ffff880075919d98
[ÂÂ 36.591833] Call Trace:
[ÂÂ 36.594443]Â [<ffffffff814f824d>] dump_stack+0x45/0x56
[ÂÂ 36.599750]Â [<ffffffff81054832>] warn_slowpath_common+0x7a/0x93
[ÂÂ 36.605967]Â [<ffffffff81332c77>] ? i915_gem_context_create_ioctl+0x2d/0xb8
[ÂÂ 36.613082]Â [<ffffffff810548ea>] warn_slowpath_null+0x15/0x17
[ÂÂ 36.619124]Â [<ffffffff81332c77>] i915_gem_context_create_ioctl+0x2d/0xb8
[ÂÂ 36.626052]Â [<ffffffff813072a8>] drm_ioctl+0x2ef/0x41f
[ÂÂ 36.631449]Â [<ffffffff81332c4a>] ? i915_switch_context+0x99/0x99
[ÂÂ 36.637704]Â [<ffffffff815029f3>] ? __do_page_fault+0x3b0/0x47b
[ÂÂ 36.643752]Â [<ffffffff81135ed6>] vfs_ioctl+0x18/0x34
[ÂÂ 36.648946]Â [<ffffffff8113668b>] do_vfs_ioctl+0x328/0x3dd
[ÂÂ 36.654585]Â [<ffffffff811344cf>] ? final_putname+0x2f/0x32
[ÂÂ 36.660289]Â [<ffffffff81134655>] ? putname+0x23/0x2c
[ÂÂ 36.665483]Â [<ffffffff81127975>] ? do_sys_open+0x20b/0x21d
[ÂÂ 36.671184]Â [<ffffffff81136792>] SyS_ioctl+0x52/0x7d
[ÂÂ 36.676385]Â [<ffffffff81502ac7>] ? do_page_fault+0x9/0xb
[ÂÂ 36.681958]Â [<ffffffff81505fe9>] system_call_fastpath+0x16/0x1b
[ÂÂ 36.688073] ---[ end trace 4d8a330e08fc4744 ]---
[ÂÂ 36.703748] vGT info:(vgt_handle_default_event_phys:1146) IRQ: receive event (Render Command Streamer MI USER INTERRUPT)
[ÂÂ 36.715011] vGT info:(vgt_handle_default_event_virt:947) IRQ: VM(0) receive event (Render Command Streamer MI USER INTERRUPT)
[ÂÂ 36.726595] vGT info:(vgt_handle_default_event_phys:1146) IRQ: receive event (Pipe A vblank)
[ÂÂ 36.735451] vGT info:(vgt_handle_default_event_virt:947) IRQ: VM(0) receive event (Pipe A vblank)
[ÂÂ 36.757485] ------------[ cut here ]------------
[ÂÂ 36.762495] WARNING: CPU: 1 PID: 2490 at drivers/gpu/drm/i915/i915_gem_context.c:567 i915_gem_context_destroy_ioctl+0x24/0xd1()
[ÂÂ 36.773979] Modules linked in: xen_acpi_processor xen_netback xen_blkback xen_gntalloc xen_gntdev coretemp snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwded
[ÂÂ 36.808274] CPU: 1 PID: 2490 Comm: unity_support_t Tainted: GÂÂÂÂÂÂÂ WÂÂÂ 3.11.6-vgt+ #14
[ÂÂ 36.816637] Hardware name: NEXCOM VTC1010/Aptio CRB, BIOS MV11B127 01/23/2015
[ÂÂ 36.823787]Â 0000000000000000 ffff880075919d58 ffffffff814f824d 0000000000000000
[ÂÂ 36.831349]Â ffff880075919d90 ffffffff81054832 ffffffff81332d26 ffff8800040dd4e0
[ÂÂ 36.838943]Â ffff880075dbc800 ffff880075919e10 ffff880075dbc800 ffff880075919da0
[ÂÂ 36.846546] Call Trace:
[ÂÂ 36.849175]Â [<ffffffff814f824d>] dump_stack+0x45/0x56
[ÂÂ 36.854483]Â [<ffffffff81054832>] warn_slowpath_common+0x7a/0x93
[ÂÂ 36.860689]Â [<ffffffff81332d26>] ? i915_gem_context_destroy_ioctl+0x24/0xd1
[ÂÂ 36.867894]Â [<ffffffff810548ea>] warn_slowpath_null+0x15/0x17
[ÂÂ 36.873912]Â [<ffffffff81332d26>] i915_gem_context_destroy_ioctl+0x24/0xd1
[ÂÂ 36.880924]Â [<ffffffff813072a8>] drm_ioctl+0x2ef/0x41f
[ÂÂ 36.886345]Â [<ffffffff81332d02>] ? i915_gem_context_create_ioctl+0xb8/0xb8
[ÂÂ 36.893457]Â [<ffffffff81138c0a>] ? __d_free+0x4b/0x50
[ÂÂ 36.898732]Â [<ffffffff81138f3c>] ? d_free+0x3d/0x4e
[ÂÂ 36.903856]Â [<ffffffff81074843>] ? lg_global_unlock+0x21/0x40
[ÂÂ 36.909863]Â [<ffffffff8113fb68>] ? mntput_no_expire+0x75/0x10f
[ÂÂ 36.915915]Â [<ffffffff81135ed6>] vfs_ioctl+0x18/0x34
[ÂÂ 36.921120]Â [<ffffffff8113668b>] do_vfs_ioctl+0x328/0x3dd
[ÂÂ 36.926750]Â [<ffffffff81129859>] ? ____fput+0x9/0xb
[ÂÂ 36.931864]Â [<ffffffff8106c49f>] ? task_work_run+0x7d/0x8e
[ÂÂ 36.937569]Â [<ffffffff81136792>] SyS_ioctl+0x52/0x7d
[ÂÂ 36.942794]Â [<ffffffff81505fe9>] system_call_fastpath+0x16/0x1b
[ÂÂ 36.948914] ---[ end trace 4d8a330e08fc4745 ]---
[ÂÂ 37.088139] init: bluetooth main process (2556) terminated with status 1
[ÂÂ 37.099318] init: bluetooth main process ended, respawning
[ÂÂ 37.288786] init: bluetooth main process (2612) terminated with status 1
[ÂÂ 37.296070] init: bluetooth main process ended, respawning
[ÂÂ 37.522574] init: bluetooth main process (2642) terminated with status 1
[ÂÂ 37.531472] init: bluetooth main process ended, respawning
[ÂÂ 37.667941] init: bluetooth main process (2682) terminated with status 1
[ÂÂ 37.677137] init: bluetooth main process ended, respawning
[ÂÂ 37.828855] init: bluetooth main process (2722) terminated with status 1
[ÂÂ 37.838335] init: bluetooth main process ended, respawning
[ÂÂ 38.036075] init: bluetooth main process (2759) terminated with status 1
[ÂÂ 38.046616] init: bluetooth main process ended, respawning
[ÂÂ 38.394613] init: bluetooth main process (2822) terminated with status 1
[ÂÂ 38.402676] init: bluetooth main process ended, respawning
[ÂÂ 38.661960] init: bluetooth main process (2870) terminated with status 1
[ÂÂ 38.678949] init: bluetooth main process ended, respawning
[ÂÂ 39.209184] init: bluetooth main process (2940) terminated with status 1
[ÂÂ 39.228661] init: bluetooth main process ended, respawning
[ÂÂ 39.334086] vGT warning:(pch_adpa_mmio_write:1174) HOTPLUG_FORCE_TRIGGER is set while VGA is enabled!
[ÂÂ 39.734430] init: bluetooth main process (2994) terminated with status 1
[ÂÂ 39.750557] init: bluetooth main process ended, respawning
[ÂÂ 39.842490] vGT error:(vgt_decode_fb_format:440) pdev->gen_dev_type = 4
[ÂÂ 39.849299] vGT error:(vgt_decode_fb_format:441) vmid = 0
[ÂÂ 39.854863] ------------[ cut here ]------------
[ÂÂ 39.859797] WARNING: CPU: 0 PID: 3022 at drivers/xen/vgt/fb_decoder.c:442 vgt_decode_fb_format+0x6d/0x39f()
[ÂÂ 39.869547] Modules linked in: xen_acpi_processor xen_netback xen_blkback xen_gntalloc xen_gntdev coretemp snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwded
[ÂÂ 39.903887] CPU: 0 PID: 3022 Comm: gnome-session-c Tainted: GÂÂÂÂÂÂÂ WÂÂÂ 3.11.6-vgt+ #14
[ÂÂ 39.912281] Hardware name: NEXCOM VTC1010/Aptio CRB, BIOS MV11B127 01/23/2015
[ÂÂ 39.919435]Â 0000000000000000 ffff880073c85cb8 ffffffff814f824d 0000000000000000
[ÂÂ 39.927049]Â ffff880073c85cf0 ffffffff81054832 ffffffff812cda32 ffff880004bcf184
[ÂÂ 39.934656]Â ffff8800043dc600 ffff880075dbc800 0000000000000000 ffff880073c85d00
[ÂÂ 39.942308] Call Trace:
[ÂÂ 39.944935]Â [<ffffffff814f824d>] dump_stack+0x45/0x56
[ÂÂ 39.950264]Â [<ffffffff81054832>] warn_slowpath_common+0x7a/0x93
[ÂÂ 39.956458]Â [<ffffffff812cda32>] ? vgt_decode_fb_format+0x6d/0x39f
[ÂÂ 39.962891]Â [<ffffffff810548ea>] warn_slowpath_null+0x15/0x17
[ÂÂ 39.968915]Â [<ffffffff812cda32>] vgt_decode_fb_format+0x6d/0x39f
[ÂÂ 39.975212]Â [<ffffffff81121b7c>] ? kmem_cache_alloc_trace+0x2d/0xee
[ÂÂ 39.981756]Â [<ffffffff81337bac>] i915_gem_vgtbuffer_ioctl+0xca/0x703
[ÂÂ 39.988383]Â [<ffffffff813072a8>] drm_ioctl+0x2ef/0x41f
[ÂÂ 39.993870]Â [<ffffffff81337ae2>] ? i915_gem_vgtbuffer_mn_invalidate_range_start+0xce/0xce
[ÂÂ 40.002317]Â [<ffffffff8113fb68>] ? mntput_no_expire+0x75/0x10f
[ÂÂ 40.008392]Â [<ffffffff81135ed6>] vfs_ioctl+0x18/0x34
[ÂÂ 40.013607]Â [<ffffffff8113668b>] do_vfs_ioctl+0x328/0x3dd
[ÂÂ 40.019234]Â [<ffffffff81129859>] ? ____fput+0x9/0xb
[ÂÂ 40.024361]Â [<ffffffff8106c49f>] ? task_work_run+0x7d/0x8e
[ÂÂ 40.030070]Â [<ffffffff81136792>] SyS_ioctl+0x52/0x7d
[ÂÂ 40.035274]Â [<ffffffff81502ac7>] ? do_page_fault+0x9/0xb
[ÂÂ 40.040875]Â [<ffffffff81505fe9>] system_call_fastpath+0x16/0x1b
[ÂÂ 40.047003] ---[ end trace 4d8a330e08fc4746 ]---
[ÂÂ 40.560113] init: bluetooth main process (3056) terminated with status 1
[ÂÂ 40.594932] init: bluetooth main process ended, respawning
[ÂÂ 40.954794] ------------[ cut here ]------------
[ÂÂ 40.959832] WARNING: CPU: 0 PID: 3022 at drivers/gpu/drm/i915/i915_gem_context.c:536 i915_gem_context_create_ioctl+0x2d/0xb8()
[ÂÂ 40.971239] Modules linked in: xen_acpi_processor xen_netback xen_blkback xen_gntalloc xen_gntdev coretemp snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwded
[ÂÂ 41.005595] CPU: 0 PID: 3022 Comm: gnome-session-c Tainted: GÂÂÂÂÂÂÂ WÂÂÂ 3.11.6-vgt+ #14
[ÂÂ 41.014005] Hardware name: NEXCOM VTC1010/Aptio CRB, BIOS MV11B127 01/23/2015
[ÂÂ 41.021162]Â 0000000000000000 ffff880073c85d50 ffffffff814f824d 0000000000000000
[ÂÂ 41.028743]Â ffff880073c85d88 ffffffff81054832 ffffffff81332c77 ffff880075dbc800
[ÂÂ 41.036341]Â ffff880005ba4000 ffff880075ee1ae0 ffff880073c85e10 ffff880073c85d98
[ÂÂ 41.043996] Call Trace:
[ÂÂ 41.046614]Â [<ffffffff814f824d>] dump_stack+0x45/0x56
[ÂÂ 41.051927]Â [<ffffffff81054832>] warn_slowpath_common+0x7a/0x93
[ÂÂ 41.058139]Â [<ffffffff81332c77>] ? i915_gem_context_create_ioctl+0x2d/0xb8
[ÂÂ 41.065277]Â [<ffffffff810548ea>] warn_slowpath_null+0x15/0x17
[ÂÂ 41.071310]Â [<ffffffff81332c77>] i915_gem_context_create_ioctl+0x2d/0xb8
[ÂÂ 41.078260]Â [<ffffffff813072a8>] drm_ioctl+0x2ef/0x41f
[ÂÂ 41.083656]Â [<ffffffff81332c4a>] ? i915_switch_context+0x99/0x99
[ÂÂ 41.089917]Â [<ffffffff815029f3>] ? __do_page_fault+0x3b0/0x47b
[ÂÂ 41.095989]Â [<ffffffff81135ed6>] vfs_ioctl+0x18/0x34
[ÂÂ 41.101211]Â [<ffffffff8113668b>] do_vfs_ioctl+0x328/0x3dd
[ÂÂ 41.106858]Â [<ffffffff811344cf>] ? final_putname+0x2f/0x32
[ÂÂ 41.112586]Â [<ffffffff81134655>] ? putname+0x23/0x2c
[ÂÂ 41.117804]Â [<ffffffff81127975>] ? do_sys_open+0x20b/0x21d
[ÂÂ 41.123514]Â [<ffffffff81136792>] SyS_ioctl+0x52/0x7d
[ÂÂ 41.128730]Â [<ffffffff81502ac7>] ? do_page_fault+0x9/0xb
[ÂÂ 41.134304]Â [<ffffffff81505fe9>] system_call_fastpath+0x16/0x1b
[ÂÂ 41.140425] ---[ end trace 4d8a330e08fc4747 ]---
[ÂÂ 41.247617] ------------[ cut here ]------------
[ÂÂ 41.252619] WARNING: CPU: 0 PID: 3022 at drivers/gpu/drm/i915/i915_gem_context.c:567 i915_gem_context_destroy_ioctl+0x24/0xd1()
[ÂÂ 41.264123] Modules linked in: xen_acpi_processor xen_netback xen_blkback xen_gntalloc xen_gntdev coretemp snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwded
[ÂÂ 41.298426] CPU: 0 PID: 3022 Comm: gnome-session-c Tainted: GÂÂÂÂÂÂÂ WÂÂÂ 3.11.6-vgt+ #14
[ÂÂ 41.306813] Hardware name: NEXCOM VTC1010/Aptio CRB, BIOS MV11B127 01/23/2015
[ÂÂ 41.313976]Â 0000000000000000 ffff880073c85d58 ffffffff814f824d 0000000000000000
[ÂÂ 41.321542]Â ffff880073c85d90 ffffffff81054832 ffffffff81332d26 ffff880075ee1ae0
[ÂÂ 41.329132]Â ffff880075dbc800 ffff880073c85e10 ffff880075dbc800 ffff880073c85da0
[ÂÂ 41.336770] Call Trace:
[ÂÂ 41.339388]Â [<ffffffff814f824d>] dump_stack+0x45/0x56
[ÂÂ 41.341161] vGT warning:(pch_adpa_mmio_write:1174) HOTPLUG_FORCE_TRIGGER is set while VGA is enabled!
[ÂÂ 41.353996]Â [<ffffffff81054832>] warn_slowpath_common+0x7a/0x93
[ÂÂ 41.360220]Â [<ffffffff81332d26>] ? i915_gem_context_destroy_ioctl+0x24/0xd1
[ÂÂ 41.367426]Â [<ffffffff810548ea>] warn_slowpath_null+0x15/0x17
[ÂÂ 41.373456]Â [<ffffffff81332d26>] i915_gem_context_destroy_ioctl+0x24/0xd1
[ÂÂ 41.380515]Â [<ffffffff813072a8>] drm_ioctl+0x2ef/0x41f
[ÂÂ 41.385999]Â [<ffffffff81332d02>] ? i915_gem_context_create_ioctl+0xb8/0xb8
[ÂÂ 41.393133]Â [<ffffffff81138c0a>] ? __d_free+0x4b/0x50
[ÂÂ 41.398417]Â [<ffffffff81138f3c>] ? d_free+0x3d/0x4e
[ÂÂ 41.403557]Â [<ffffffff81074843>] ? lg_global_unlock+0x21/0x40
[ÂÂ 41.409575]Â [<ffffffff8113fb68>] ? mntput_no_expire+0x75/0x10f
[ÂÂ 41.415634]Â [<ffffffff81135ed6>] vfs_ioctl+0x18/0x34
[ÂÂ 41.420863]Â [<ffffffff8113668b>] do_vfs_ioctl+0x328/0x3dd
[ÂÂ 41.426506]Â [<ffffffff81129859>] ? ____fput+0x9/0xb
[ÂÂ 41.431638]Â [<ffffffff8106c49f>] ? task_work_run+0x7d/0x8e
[ÂÂ 41.437352]Â [<ffffffff81136792>] SyS_ioctl+0x52/0x7d
[ÂÂ 41.439071] vGT warning:(pch_adpa_mmio_write:1174) HOTPLUG_FORCE_TRIGGER is set while VGA is enabled!
[ÂÂ 41.451952]Â [<ffffffff81505fe9>] system_call_fastpath+0x16/0x1b
[ÂÂ 41.458088] ---[ end trace 4d8a330e08fc4748 ]---
[ÂÂ 41.652959] init: bluetooth main process (3177) terminated with status 1
[ÂÂ 41.681367] init: bluetooth main process ended, respawning
[ÂÂ 42.436694] init: bluetooth main process (3270) terminated with status 1
[ÂÂ 42.454661] init: bluetooth main process ended, respawning
[ÂÂ 43.248051] ahci 0000:00:13.0: port does not support device sleep
[ÂÂ 43.410819] init: bluetooth main process (3347) terminated with status 1
[ÂÂ 43.432957] init: bluetooth main process ended, respawning
[ÂÂ 43.888174] vGT warning:(pch_adpa_mmio_write:1174) HOTPLUG_FORCE_TRIGGER is set while VGA is enabled!
[ÂÂ 43.912534] init: bluetooth main process (3389) terminated with status 1
[ÂÂ 43.925124] init: bluetooth main process ended, respawning
[ÂÂ 44.195267] vGT warning:(pch_adpa_mmio_write:1174) HOTPLUG_FORCE_TRIGGER is set while VGA is enabled!
[ÂÂ 44.528840] init: bluetooth main process (3423) terminated with status 1
[ÂÂ 44.564668] init: bluetooth main process ended, respawning
[ÂÂ 44.716798] vGT error:(vgt_decode_fb_format:440) pdev->gen_dev_type = 4
[ÂÂ 44.723590] vGT error:(vgt_decode_fb_format:441) vmid = 0
[ÂÂ 44.729134] ------------[ cut here ]------------
[ÂÂ 44.734052] WARNING: CPU: 0 PID: 3314 at drivers/xen/vgt/fb_decoder.c:442 vgt_decode_fb_format+0x6d/0x39f()
[ÂÂ 44.743804] Modules linked in: xen_acpi_processor xen_netback xen_blkback xen_gntalloc xen_gntdev coretemp snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwded
[ÂÂ 44.778093] CPU: 0 PID: 3314 Comm: compiz Tainted: GÂÂÂÂÂÂÂ WÂÂÂ 3.11.6-vgt+ #14
[ÂÂ 44.785709] Hardware name: NEXCOM VTC1010/Aptio CRB, BIOS MV11B127 01/23/2015
[ÂÂ 44.792875]Â 0000000000000000 ffff880003febcb8 ffffffff814f824d 0000000000000000
[ÂÂ 44.800439]Â ffff880003febcf0 ffffffff81054832 ffffffff812cda32 ffff8800055f5584
[ÂÂ 44.808032]Â ffff880073895c00 ffff880075dbc800 0000000000000000 ffff880003febd00
[ÂÂ 44.815657] Call Trace:
[ÂÂ 44.818288]Â [<ffffffff814f824d>] dump_stack+0x45/0x56
[ÂÂ 44.823619]Â [<ffffffff81054832>] warn_slowpath_common+0x7a/0x93
[ÂÂ 44.829809]Â [<ffffffff812cda32>] ? vgt_decode_fb_format+0x6d/0x39f
[ÂÂ 44.836252]Â [<ffffffff810548ea>] warn_slowpath_null+0x15/0x17
[ÂÂ 44.842260]Â [<ffffffff812cda32>] vgt_decode_fb_format+0x6d/0x39f
[ÂÂ 44.848558]Â [<ffffffff81121b7c>] ? kmem_cache_alloc_trace+0x2d/0xee
[ÂÂ 44.855097]Â [<ffffffff81337bac>] i915_gem_vgtbuffer_ioctl+0xca/0x703
[ÂÂ 44.861697]Â [<ffffffff813072a8>] drm_ioctl+0x2ef/0x41f
[ÂÂ 44.867175]Â [<ffffffff81337ae2>] ? i915_gem_vgtbuffer_mn_invalidate_range_start+0xce/0xce
[ÂÂ 44.875619]Â [<ffffffff8113fb68>] ? mntput_no_expire+0x75/0x10f
[ÂÂ 44.881683]Â [<ffffffff81135ed6>] vfs_ioctl+0x18/0x34
[ÂÂ 44.886910]Â [<ffffffff8113668b>] do_vfs_ioctl+0x328/0x3dd
[ÂÂ 44.892538]Â [<ffffffff81129859>] ? ____fput+0x9/0xb
[ÂÂ 44.897665]Â [<ffffffff8106c49f>] ? task_work_run+0x7d/0x8e
[ÂÂ 44.903403]Â [<ffffffff81136792>] SyS_ioctl+0x52/0x7d
[ÂÂ 44.908619]Â [<ffffffff81502ac7>] ? do_page_fault+0x9/0xb
[ÂÂ 44.914193]Â [<ffffffff81505fe9>] system_call_fastpath+0x16/0x1b
[ÂÂ 44.920315] ---[ end trace 4d8a330e08fc4749 ]---
[ÂÂ 45.196844] init: bluetooth main process (3474) terminated with status 1
[ÂÂ 45.210889] init: bluetooth main process ended, respawning
[ÂÂ 45.258717] ------------[ cut here ]------------
[ÂÂ 45.263735] WARNING: CPU: 0 PID: 3314 at drivers/gpu/drm/i915/i915_gem_context.c:536 i915_gem_context_create_ioctl+0x2d/0xb8()
[ÂÂ 45.275144] Modules linked in: xen_acpi_processor xen_netback xen_blkback xen_gntalloc xen_gntdev coretemp snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwded
[ÂÂ 45.309438] CPU: 0 PID: 3314 Comm: compiz Tainted: GÂÂÂÂÂÂÂ WÂÂÂ 3.11.6-vgt+ #14
[ÂÂ 45.317028] Hardware name: NEXCOM VTC1010/Aptio CRB, BIOS MV11B127 01/23/2015
[ÂÂ 45.324172]Â 0000000000000000 ffff880003febd50 ffffffff814f824d 0000000000000000
[ÂÂ 45.331774]Â ffff880003febd88 ffffffff81054832 ffffffff81332c77 ffff880075dbc800
[ÂÂ 45.339354]Â ffff880005ba4000 ffff88000491f8a0 ffff880003febe10 ffff880003febd98
[ÂÂ 45.347000] Call Trace:
[ÂÂ 45.349620]Â [<ffffffff814f824d>] dump_stack+0x45/0x56
[ÂÂ 45.354932]Â [<ffffffff81054832>] warn_slowpath_common+0x7a/0x93
[ÂÂ 45.361138]Â [<ffffffff81332c77>] ? i915_gem_context_create_ioctl+0x2d/0xb8
[ÂÂ 45.368264]Â [<ffffffff810548ea>] warn_slowpath_null+0x15/0x17
[ÂÂ 45.374315]Â [<ffffffff81332c77>] i915_gem_context_create_ioctl+0x2d/0xb8
[ÂÂ 45.381264]Â [<ffffffff813072a8>] drm_ioctl+0x2ef/0x41f
[ÂÂ 45.386679]Â [<ffffffff81332c4a>] ? i915_switch_context+0x99/0x99
[ÂÂ 45.392963]Â [<ffffffff815029f3>] ? __do_page_fault+0x3b0/0x47b
[ÂÂ 45.399034]Â [<ffffffff81135ed6>] vfs_ioctl+0x18/0x34
[ÂÂ 45.404257]Â [<ffffffff8113668b>] do_vfs_ioctl+0x328/0x3dd
[ÂÂ 45.409920]Â [<ffffffff811344cf>] ? final_putname+0x2f/0x32
[ÂÂ 45.415635]Â [<ffffffff81134655>] ? putname+0x23/0x2c
[ÂÂ 45.420861]Â [<ffffffff81127975>] ? do_sys_open+0x20b/0x21d
[ÂÂ 45.426568]Â [<ffffffff81136792>] SyS_ioctl+0x52/0x7d
[ÂÂ 45.431779]Â [<ffffffff81502ac7>] ? do_page_fault+0x9/0xb
[ÂÂ 45.437358]Â [<ffffffff81505fe9>] system_call_fastpath+0x16/0x1b
[ÂÂ 45.443482] ---[ end trace 4d8a330e08fc474a ]---
[ÂÂ 45.485229] vGT warning:(pch_adpa_mmio_write:1174) HOTPLUG_FORCE_TRIGGER is set while VGA is enabled!
[ÂÂ 45.612587] init: bluetooth main process (3512) terminated with status 1
[ÂÂ 45.623666] init: bluetooth main process ended, respawning
[ÂÂ 45.823551] vGT info:(vgt_handle_default_event_phys:1146) IRQ: receive event (RP UP threshold interrupt)
[ÂÂ 45.833371] vGT info:(vgt_handle_default_event_virt:947) IRQ: VM(0) receive event (RP UP threshold interrupt)
[ÂÂ 46.036438] init: bluetooth main process (3551) terminated with status 1
[ÂÂ 46.043656] init: bluetooth main process ended, respawning
[ÂÂ 46.294474] init: bluetooth main process (3583) terminated with status 1
[ÂÂ 46.306912] init: bluetooth main process ended, respawning
[ÂÂ 46.473591] init: bluetooth main process (3610) terminated with status 1
[ÂÂ 46.482019] init: bluetooth main process ended, respawning
[ÂÂ 46.636264] init: bluetooth main process (3634) terminated with status 1
[ÂÂ 46.643411] init: bluetooth main process ended, respawning
[ÂÂ 46.793006] init: bluetooth main process (3664) terminated with status 1
[ÂÂ 46.801022] init: bluetooth main process ended, respawning
[ÂÂ 46.944952] init: bluetooth main process (3688) terminated with status 1
[ÂÂ 46.952052] init: bluetooth respawning too fast, stopped
[ÂÂ 49.496167] vGT warning:(vgt_emulate_read:355) vGT: untracked MMIO read: vm_id(0), offset=0x22068,len=4, val=0x0!!! base_off=0x0
[ÂÂ 51.495560] vGT warning:(vgt_emulate_read:355) vGT: untracked MMIO read: vm_id(0), offset=0x22068,len=4, val=0x0!!! base_off=0x0
[ÂÂ 51.507539] [drm:i915_hangcheck_elapsed] *ERROR* stuck on render ring
[ÂÂ 51.514427] [drm:i915_hangcheck_elapsed] *ERROR* stuck on blitter ring
[ÂÂ 51.521359] vGT info:(vgt_handle_dom0_device_reset:940) DOM0 hangcheck timer request reset device.
[ÂÂ 53.007532] vGT warning:(idle_render_engine:149) Timeout wait 500 ms for ring(0) empty
[ÂÂ 53.173467] vGT info:(idle_render_engine:171) (0) check whether ring actually stops
[ÂÂ 53.181289] vGT info:(idle_render_engine:179) trigger another wait...
[ÂÂ 54.718964] vGT info:(idle_render_engine:171) (1) check whether ring actually stops
[ÂÂ 54.726803] vGT info:(idle_render_engine:179) trigger another wait...
[ÂÂ 56.313469] vGT info:(idle_render_engine:171) (2) check whether ring actually stops
[ÂÂ 56.321291] vGT info:(idle_render_engine:179) trigger another wait...
[ÂÂ 57.897305] vGT error:(idle_render_engine:185) Ugh...it's a real hang!!!
[ÂÂ 57.904355] vGT info:(vgt_handle_dom0_device_reset:947) Really hung, request to reset device.
[ÂÂ 57.921438] vGT info:(vgt_reset_device:976) Stop VGT context switch.
[ÂÂ 57.928020] vGT info:(vgt_reset_device:1006) Disable master interrupt.
[ÂÂ 57.934755] vGT info:(do_device_reset:872) Request DOM0 to reset device.
[ÂÂ 57.941752] [drm] capturing error event; look for more information in /sys/kernel/debug/dri/0/i915_error_state
[ÂÂ 57.952126] vGT warning:(vgt_emulate_read:355) vGT: untracked MMIO read: vm_id(0), offset=0x20b0,len=4, val=0x0!!! base_off=0x0
[ÂÂ 57.963953] vGT warning:(vgt_emulate_read:355) vGT: untracked MMIO read: vm_id(0), offset=0x2024,len=4, val=0x0!!! base_off=0x0
[ÂÂ 57.975820] vGT warning:(vgt_emulate_read:355) vGT: untracked MMIO read: vm_id(0), offset=0x44050,len=4, val=0x0!!! base_off=0x0
[ÂÂ 57.987736] vGT warning:(vgt_emulate_read:355) vGT: untracked MMIO read: vm_id(0), offset=0x40a0,len=4, val=0x0!!! base_off=0x0
[ÂÂ 57.999564] vGT warning:(vgt_emulate_read:355) vGT: untracked MMIO read: vm_id(0), offset=0x40b0,len=4, val=0x0!!! base_off=0x0
[ÂÂ 58.011375] vGT warning:(vgt_emulate_read:355) vGT: untracked MMIO read: vm_id(0), offset=0x206c,len=4, val=0x0!!! base_off=0x0
[ÂÂ 58.022966] ------------------------------------------
[ÂÂ 58.028203] VM(0) likely triggers a gfx reset
[ÂÂ 58.032680] Disable untracked MMIO warning for VM(0)
[ÂÂ 58.037750] ------------------------------------------
[ÂÂ 58.042976] ========vGT DEBUG INFO==========
[ÂÂ 58.047286] CPU[0]: out of vgt
[ÂÂ 58.050397] CPU[1]: in vgt
[ÂÂ 58.053160] DE_RRMR: 0
[ÂÂ 58.055657] -----------ring-0 info-------------
[ÂÂ 58.060186] VM0(*):head(0), tail(5e0), start(3000), ctl(1f001), uhptr(0)
[ÂÂ 58.067221] debug registers,reg maked with <*> may not apply to every ring):
[ÂÂ 58.074327] ....RING_EIR: 00000000
[ÂÂ 58.077803] ....RING_EMR: ffffffff
[ÂÂ 58.081276] ....RING_ESR: 00000000
[ÂÂ 58.084748] ....00002068: 05000000
[ÂÂ 58.088264] ....INSTPS* (parser state): 80000100 :
[ÂÂ 58.093155] ....ACTHD(active header): 000003d0
[ÂÂ 58.097697] ....UHPTR(pending header): 00000000
[ÂÂ 58.102291] ....00002078: 00003448
[ÂÂ 58.105818] ....CSCMDOP* (instruction DWORD): 7a000002
[ÂÂ 58.111086] ....CSCMDVLD* (command buffer valid): 00000001
[ÂÂ 58.116612] (informative)
[ÂÂ 58.119343] ....INSTDONE_1(FYI): ffffffff
[ÂÂ 58.123433] ....INSTDONE_2*: 00000000
[ÂÂ 58.127299] ring buffer(0): head (0x3d0) tail(0x5e0), start(0x3000), ctl(0x1f001)
[ÂÂ 58.134865] ring xxx:(0), mi_mode idle:(0)
[ÂÂ 58.139053] p_contents(ffffc90010a03000)
[ÂÂ 58.142970]
[00000390]: 00000000 04000001 11000001 00012044 fffff00e 00000000 11000001 00022040
[000003b0]: fffff00e 00000000 10800001 00000080 fffff00e 01000000 18800100 00866000
[000003d0]: 7a000002(*) 00101001 00024080 00000000 11000001 00012044 fffff00f 00000000
[000003f0]: 11000001 00022040 fffff00f 00000000 10800001 00000080 fffff00f 01000000
[ÂÂ 58.175640] Batch buffer in PPGTT with PPGTT disabled?
[ÂÂ 58.180889] -----------ring-1 info-------------
[ÂÂ 58.185418] VM0(*):head(0), tail(0), start(27000), ctl(1f001), uhptr(0)
[ÂÂ 58.192382] debug registers,reg maked with <*> may not apply to every ring):
[ÂÂ 58.199486] ....RING_EIR: 00000000
[ÂÂ 58.202944] ....RING_EMR: ffffffff
[ÂÂ 58.206414] ....RING_ESR: 00000000
[ÂÂ 58.209883] ....00012064*: 00000000
[ÂÂ 58.213459] ....00012068: 00000000
[ÂÂ 58.216962] ....ACTHD(active header): 00000000
[ÂÂ 58.221523] ....UHPTR(pending header): 00000000
[ÂÂ 58.226126] ....00012078: 00027000
[ÂÂ 58.229569] (informative)
[ÂÂ 58.232296] ....INSTDONE_1(FYI): fffffffe
[ÂÂ 58.236511] ring buffer(1): head (0x0) tail(0x0), start(0x27000), ctl(0x1f001)
[ÂÂ 58.243839] ring xxx:(0), mi_mode idle:(512)
[ÂÂ 58.248186] p_contents(ffffc90010a27000)
[ÂÂ 58.252102]
[0001ffc0]: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[0001ffe0]: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[00000000]: 00000000(*) 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[00000020]: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ÂÂ 58.284757] -----------ring-2 info-------------
[ÂÂ 58.289281] VM0(*):head(0), tail(590), start(4a000), ctl(1f001), uhptr(0)
[ÂÂ 58.296424] debug registers,reg maked with <*> may not apply to every ring):
[ÂÂ 58.303536] ....RING_EIR: 00000000
[ÂÂ 58.307012] ....RING_EMR: ffffffff
[ÂÂ 58.310477] ....RING_ESR: 00000000
[ÂÂ 58.313954] ....00022064*: 00000000
[ÂÂ 58.317507] ....00022068: 0b140001
[ÂÂ 58.321008] ....ACTHD(active header): 0000021c
[ÂÂ 58.325558] ....UHPTR(pending header): 00000000
[ÂÂ 58.330153] ....00022078: 0004a210
[ÂÂ 58.333591] (informative)
[ÂÂ 58.336325] ....INSTDONE_1(FYI): fffffffe
[ÂÂ 58.340558] ring buffer(2): head (0x210) tail(0x590), start(0x4a000), ctl(0x1f401)
[ÂÂ 58.348219] ring xxx:(0), mi_mode idle:(512)
[ÂÂ 58.352566] p_contents(ffffc90010a4a000)
[ÂÂ 58.356488]
[000001d0]: 13000001 000000c4 00000000 00000000 11000001 00002044 fffff00d 00000000
[000001f0]: 11000001 00012040 fffff00d 00000000 10800001 00000080 fffff00d 01000000
[00000210]: 0b140001(*) fffff00f 00000000 00000000 13244001 000000c4 00000000 00000000
[00000230]: 18800100 00864000 13000001 000000c4 00000000 00000000 11000001 00002044
[ÂÂ 58.414672] [drm:i915_set_reset_status] *ERROR* render ring hung flushing bo (0x866000 ctx 0) at 0x3d0
[ÂÂ 58.424615] vGT info:(gen6_gdrst_mmio_write:334) VM 0 request Full GPU Reset
[ÂÂ 58.431876] vGT info:(handle_device_reset:293) VM 0 is trying to reset device: full reset.
[ÂÂ 58.440224] ========vGT DEBUG INFO==========
[ÂÂ 58.444539] CPU[0]: out of vgt
[ÂÂ 58.447647] CPU[1]: in vgt
[ÂÂ 58.450413] DE_RRMR: 0
[ÂÂ 58.452905] -----------ring-0 info-------------
[ÂÂ 58.457427] VM0(*):head(0), tail(5e0), start(3000), ctl(1f001), uhptr(0)
[ÂÂ 58.464461] debug registers,reg maked with <*> may not apply to every ring):
[ÂÂ 58.471558] ....RING_EIR: 00000000
[ÂÂ 58.475023] ....RING_EMR: ffffffff
[ÂÂ 58.478492] ....RING_ESR: 00000000
[ÂÂ 58.481960] ....00002068: 05000000
[ÂÂ 58.485468] ....INSTPS* (parser state): 80000100 :
[ÂÂ 58.490413] ....ACTHD(active header): 000003d0
[ÂÂ 58.494950] ....UHPTR(pending header): 00000000
[ÂÂ 58.499535] ....00002078: 00003448
[ÂÂ 58.503058] ....CSCMDOP* (instruction DWORD): 7a000002
[ÂÂ 58.508320] ....CSCMDVLD* (command buffer valid): 00000001
[ÂÂ 58.513832] (informative)
[ÂÂ 58.516567] ....INSTDONE_1(FYI): ffffffff
[ÂÂ 58.520648] ....INSTDONE_2*: 00000000
[ÂÂ 58.524510] ring buffer(0): head (0x3d0) tail(0x5e0), start(0x3000), ctl(0x1f001)
[ÂÂ 58.532078] ring xxx:(0), mi_mode idle:(0)
[ÂÂ 58.536254] p_contents(ffffc90010a03000)
[ÂÂ 58.540171]
[00000390]: 00000000 04000001 11000001 00012044 fffff00e 00000000 11000001 00022040
[000003b0]: fffff00e 00000000 10800001 00000080 fffff00e 01000000 18800100 00866000
[000003d0]: 7a000002(*) 00101001 00024080 00000000 11000001 00012044 fffff00f 00000000
[000003f0]: 11000001 00022040 fffff00f 00000000 10800001 00000080 fffff00f 01000000
[ÂÂ 58.572787] Batch buffer in PPGTT with PPGTT disabled?
[ÂÂ 58.578022] -----------ring-1 info-------------
[ÂÂ 58.582542] VM0(*):head(0), tail(0), start(27000), ctl(1f001), uhptr(0)
[ÂÂ 58.589487] debug registers,reg maked with <*> may not apply to every ring):
[ÂÂ 58.596644] ....RING_EIR: 00000000
[ÂÂ 58.600106] ....RING_EMR: ffffffff
[ÂÂ 58.603571] ....RING_ESR: 00000000
[ÂÂ 58.607041] ....00012064*: 00000000
[ÂÂ 58.610591] ....00012068: 00000000
[ÂÂ 58.614093] ....ACTHD(active header): 00000000
[ÂÂ 58.618636] ....UHPTR(pending header): 00000000
[ÂÂ 58.623220] ....00012078: 00027000
[ÂÂ 58.626657] (informative)
[ÂÂ 58.629391] ....INSTDONE_1(FYI): fffffffe
[ÂÂ 58.633593] ring buffer(1): head (0x0) tail(0x0), start(0x27000), ctl(0x1f001)
[ÂÂ 58.640904] ring xxx:(0), mi_mode idle:(512)
[ÂÂ 58.645246] p_contents(ffffc90010a27000)
[ÂÂ 58.649164]
[0001ffc0]: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[0001ffe0]: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[00000000]: 00000000(*) 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[00000020]: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ÂÂ 58.681763] -----------ring-2 info-------------
[ÂÂ 58.686283] VM0(*):head(0), tail(590), start(4a000), ctl(1f001), uhptr(0)
[ÂÂ 58.693414] debug registers,reg maked with <*> may not apply to every ring):
[ÂÂ 58.700510] ....RING_EIR: 00000000
[ÂÂ 58.703977] ....RING_EMR: ffffffff
[ÂÂ 58.707444] ....RING_ESR: 00000000
[ÂÂ 58.710913] ....00022064*: 00000000
[ÂÂ 58.714465] ....00022068: 0b140001
[ÂÂ 58.717964] ....ACTHD(active header): 0000021c
[ÂÂ 58.722508] ....UHPTR(pending header): 00000000
[ÂÂ 58.727100] ....00022078: 0004a210
[ÂÂ 58.730537] (informative)
[ÂÂ 58.733275] ....INSTDONE_1(FYI): fffffffe
[ÂÂ 58.737484] ring buffer(2): head (0x210) tail(0x590), start(0x4a000), ctl(0x1f401)
[ÂÂ 58.745139] ring xxx:(0), mi_mode idle:(512)
[ÂÂ 58.749473] p_contents(ffffc90010a4a000)
[ÂÂ 58.753381]
[000001d0]: 13000001 000000c4 00000000 00000000 11000001 00002044 fffff00d 00000000
[000001f0]: 11000001 00012040 fffff00d 00000000 10800001 00000080 fffff00d 01000000
[00000210]: 0b140001(*) fffff00f 00000000 00000000 13244001 000000c4 00000000 00000000
[00000230]: 18800100 00864000 13000001 000000c4 00000000 00000000 11000001 00002044
[ÂÂ 58.786557] vGT info:(gen6_gdrst_mmio_read:377) device is idle.
[ÂÂ 58.792771] vGT info:(show_interrupt_regs:299) vGT: VLVDEISR is 40, VLVDEIIR is 0, VLVDEIMR is fffdffff, VLVDEIER is 0
[ÂÂ 58.803695] vGT info:(show_interrupt_regs:305) vGT: DEISR is 0, DEIIR is 0, DEIMR is 0, DEIER is 0
[ÂÂ 58.812892] vGT info:(show_interrupt_regs:310) vGT: SDEISR is 0, SDEIIR is 0, SDEIMR is 0, SDEIER is 0
[ÂÂ 58.822447] vGT info:(show_interrupt_regs:315) vGT: GTISR is 0, GTIIR is 0, GTIMR is 1, GTIER is 401001
[ÂÂ 58.832075] vGT info:(show_interrupt_regs:320) vGT: PMISR is 0, PMIIR is 24, PMIMR is 0, PMIER is 70
[ÂÂ 58.841476] vGT info:(show_interrupt_regs:324) vGT: RCS_IMR is ffffffff, VCS_IMR is ffffffff, BCS_IMR is ffffffff
[ÂÂ 58.852096] vGT: activate vgt (0) on ring (0)
[ÂÂ 58.856545] vGT-0: add to render run queue!
[ÂÂ 58.861465] vGT: activate vgt (0) on ring (1)
[ÂÂ 58.866368] vGT: activate vgt (0) on ring (2)
[ÂÂ 58.871882] vGT: setup vGT irq hook in valleyview_irq_preinstall
[ÂÂ 58.875687] vGT warning:(pch_adpa_mmio_write:1174) HOTPLUG_FORCE_TRIGGER is set while VGA is enabled!
[ÂÂ 58.887404] vGT: found matching pgt_device when registering irq for dev (0x10)
[ÂÂ 58.894954] vGT: allocate virq (119) for i915, while keep original irq (118) for vgt
[ÂÂ 58.902780] vGT: track_nest: enabled
[ÂÂ 58.906544] ironlake_update_plane
[ÂÂ 58.910177] vGT info:(do_device_reset:893) GPU ring status:
[ÂÂ 58.911012] Ring-2 starts work for vgt-0
[ÂÂ 58.912397] Ring-0 starts work for vgt-0
[ÂÂ 58.923938] vGT info:(do_device_reset:902) RING 0: H: 68 T: 68 S: 3000 C: 1f001.
[ÂÂ 58.931538] vGT info:(do_device_reset:902) RING 1: H: 0 T: 0 S: 27000 C: 1f001.
[ÂÂ 58.939058] vGT info:(do_device_reset:902) RING 2: H: 108 T: 108 S: 4a000 C: 1f001.
[ÂÂ 58.946956] vGT info:(do_device_reset:920) DE: ier: 0 iir: 0 imr: fffdffff isr: 40 gtlcmir: 0.
[ÂÂ 58.952132] vGT warning:(pch_adpa_mmio_write:1174) HOTPLUG_FORCE_TRIGGER is set while VGA is enabled!
[ÂÂ 58.964966] vGT info:(do_device_reset:922) Finish.
[ÂÂ 58.969931] vGT info:(vgt_reset_device:1024) Restart VGT context switch.
[ÂÂ 58.976830] vGT info:(vgt_reset_device:1048) Enable master interrupt, DEIER: 200f0
[ÂÂ 59.006972] vGT warning:(pch_adpa_mmio_write:1174) HOTPLUG_FORCE_TRIGGER is set while VGA is enabled!
[ÂÂ 60.307274] vGT warning:(pch_adpa_mmio_write:1174) HOTPLUG_FORCE_TRIGGER is set while VGA is enabled!
[Â 113.745395] Bridge firewalling registered
[Â 113.883184] device eth0 entered promiscuous mode
[Â 117.451833] igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[Â 117.459778] xenbr0: port 1(eth0) entered forwarding state
[Â 117.465410] xenbr0: port 1(eth0) entered forwarding state
[Â 124.870623] tun: Universal TUN/TAP device driver, 1.6
[Â 124.875872] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
[Â 124.948257] ------------[ cut here ]------------
[Â 124.953200] WARNING: CPU: 1 PID: 4108 at drivers/xen/vgt/sysfs.c:48 vgt_create_instance_store+0x29/0x3e9()
[Â 124.962868] Modules linked in: tun bridge stp llc xen_acpi_processor xen_netback xen_blkback xen_gntalloc xen_gntdev coretemp snd_hda_codec_realtek snd_hda_intel sndd
[Â 124.998847] CPU: 1 PID: 4108 Comm: qemu-system-i38 Tainted: GÂÂÂÂÂÂÂ WÂÂÂ 3.11.6-vgt+ #14
[Â 125.007224] Hardware name: NEXCOM VTC1010/Aptio CRB, BIOS MV11B127 01/23/2015
[Â 125.014373]Â 0000000000000000 ffff88004f273da8 ffffffff814f824d 0000000000000000
[Â 125.021942]Â ffff88004f273de0 ffffffff81054832 ffffffff812b9dae ffff880045204000
[Â 125.029546]Â 000000000000000e 000000000000000e ffff88004f273f58 ffff88004f273df0
[Â 125.037165] Call Trace:
[Â 125.039780]Â [<ffffffff814f824d>] dump_stack+0x45/0x56
[Â 125.045084]Â [<ffffffff81054832>] warn_slowpath_common+0x7a/0x93
[Â 125.051284]Â [<ffffffff812b9dae>] ? vgt_create_instance_store+0x29/0x3e9
[Â 125.058138]Â [<ffffffff810548ea>] warn_slowpath_null+0x15/0x17
[Â 125.064159]Â [<ffffffff812b9dae>] vgt_create_instance_store+0x29/0x3e9
[Â 125.070870]Â [<ffffffff8111ccfa>] ? alloc_pages_current+0xf0/0x10b
[Â 125.077208]Â [<ffffffff812b88d0>] kobj_attr_store+0xf/0x19
[Â 125.082854]Â [<ffffffff8117f3ff>] sysfs_write_file+0xe1/0x117
[Â 125.088739]Â [<ffffffff81128294>] vfs_write+0xc2/0x190
[Â 125.094010]Â [<ffffffff81128b1c>] SyS_write+0x44/0x78
[Â 125.099235]Â [<ffffffff81505fe9>] system_call_fastpath+0x16/0x1b
[Â 125.105357] ---[ end trace 4d8a330e08fc474b ]---
[Â 125.110024] vp.vm_id = 1
[Â 125.113958] ------------[ cut here ]------------
[Â 125.118897] WARNING: CPU: 1 PID: 4108 at drivers/xen/vgt/instance.c:122 create_vgt_instance+0x39/0xa3b()
[Â 125.128386] Modules linked in: tun bridge stp llc xen_acpi_processor xen_netback xen_blkback xen_gntalloc xen_gntdev coretemp snd_hda_codec_realtek snd_hda_intel sndd
[Â 125.164401] CPU: 1 PID: 4108 Comm: qemu-system-i38 Tainted: GÂÂÂÂÂÂÂ WÂÂÂ 3.11.6-vgt+ #14
[Â 125.172789] Hardware name: NEXCOM VTC1010/Aptio CRB, BIOS MV11B127 01/23/2015
[Â 125.179941]Â 0000000000000000 ffff88004f273d38 ffffffff814f824d 0000000000000000
[Â 125.187517]Â ffff88004f273d70 ffffffff81054832 ffffffff812ca6a6 ffffffff817e9d10
[Â 125.195086]Â 0000000000000001 0000000000000001 0000000000000001 ffff88004f273d80
[Â 125.202712] Call Trace:
[Â 125.205333]Â [<ffffffff814f824d>] dump_stack+0x45/0x56
[Â 125.210636]Â [<ffffffff81054832>] warn_slowpath_common+0x7a/0x93
[Â 125.216826]Â [<ffffffff812ca6a6>] ? create_vgt_instance+0x39/0xa3b
[Â 125.223173]Â [<ffffffff810548ea>] warn_slowpath_null+0x15/0x17
[Â 125.229164]Â [<ffffffff812ca6a6>] create_vgt_instance+0x39/0xa3b
[Â 125.235370]Â [<ffffffff812b9f45>] vgt_create_instance_store+0x1c0/0x3e9
[Â 125.242146]Â [<ffffffff8111ccfa>] ? alloc_pages_current+0xf0/0x10b
[Â 125.248472]Â [<ffffffff812b88d0>] kobj_attr_store+0xf/0x19
[Â 125.254118]Â [<ffffffff8117f3ff>] sysfs_write_file+0xe1/0x117
[Â 125.260008]Â [<ffffffff81128294>] vfs_write+0xc2/0x190
[Â 125.265276]Â [<ffffffff81128b1c>] SyS_write+0x44/0x78
[Â 125.270493]Â [<ffffffff81505fe9>] system_call_fastpath+0x16/0x1b
[Â 125.276623] ---[ end trace 4d8a330e08fc474c ]---
[Â 125.281554] vGT info:(create_vgt_instance:125) vm_id=1, low_gm_sz=128MB, high_gm_sz=384MB, fence_sz=4, vgt_primary=1
[Â 125.294012] ------------[ cut here ]------------
[Â 125.298942] WARNING: CPU: 1 PID: 4108 at drivers/xen/vgt/instance.c:52 create_vgt_instance+0xc0/0xa3b()
[Â 125.308342] Modules linked in: tun bridge stp llc xen_acpi_processor xen_netback xen_blkback xen_gntalloc xen_gntdev coretemp snd_hda_codec_realtek snd_hda_intel sndd
[Â 125.344372] CPU: 1 PID: 4108 Comm: qemu-system-i38 Tainted: GÂÂÂÂÂÂÂ WÂÂÂ 3.11.6-vgt+ #14
[Â 125.352763] Hardware name: NEXCOM VTC1010/Aptio CRB, BIOS MV11B127 01/23/2015
[Â 125.359919]Â 0000000000000000 ffff88004f273d38 ffffffff814f824d 0000000000000000
[Â 125.367515]Â ffff88004f273d70 ffffffff81054832 ffffffff812ca72d ffffffff817e9d10
[Â 125.375072]Â 0000000000000001 0000000000000001 0000000000000001 ffff88004f273d80
[Â 125.382734] Call Trace:
[Â 125.385353]Â [<ffffffff814f824d>] dump_stack+0x45/0x56
[Â 125.390674]Â [<ffffffff81054832>] warn_slowpath_common+0x7a/0x93
[Â 125.396870]Â [<ffffffff812ca72d>] ? create_vgt_instance+0xc0/0xa3b
[Â 125.403211]Â [<ffffffff810548ea>] warn_slowpath_null+0x15/0x17
[Â 125.409233]Â [<ffffffff812ca72d>] create_vgt_instance+0xc0/0xa3b
[Â 125.415432]Â [<ffffffff812b9f45>] vgt_create_instance_store+0x1c0/0x3e9
[Â 125.422240]Â [<ffffffff8111ccfa>] ? alloc_pages_current+0xf0/0x10b
[Â 125.428581]Â [<ffffffff812b88d0>] kobj_attr_store+0xf/0x19
[Â 125.434262]Â [<ffffffff8117f3ff>] sysfs_write_file+0xe1/0x117
[Â 125.440155]Â [<ffffffff81128294>] vfs_write+0xc2/0x190
[Â 125.445453]Â [<ffffffff81128b1c>] SyS_write+0x44/0x78
[Â 125.450690]Â [<ffffffff81505fe9>] system_call_fastpath+0x16/0x1b
[Â 125.456807] ---[ end trace 4d8a330e08fc474d ]---
[Â 125.461628] vGT error:(allocate_vgt_id:53) vgt_id_alloc_bitmap = 1
[Â 125.467979] vGT error:(allocate_vgt_id:64) vgt_id_alloc_bitmap = 3
[Â 125.477201] vGT info:(create_vgt_instance:181) Virtual GTT size: 0x200000
[Â 125.485611] VM1 Ring0 context_save_area is allocated at gm(f90d000)
[Â 125.513804] VM1 Ring1 context_save_area is allocated at gm(f94d000)
[Â 125.520522] VM1 Ring2 context_save_area is allocated at gm(f98d000)
[Â 125.527390] vGT info:(create_vgt_instance:217) aperture: [0xc7800000, 0xcf7fffff] guest [0xc7800000, 0xcf7fffff] va(0xffffc90018200000)
[Â 125.540008] vGT info:(create_vgt_instance:228) GM: [0x7800000, 0xf7fffff], [0x28000000, 0x3fffffff], guest[0x7800000, 0xf7fffff], [0x28000000, 0x3fffffff]
[Â 125.558513] vGT info:(create_vgt_instance:265) filling VGT_PVINFO_PAGE for dom1:
[Â 125.558513]ÂÂÂ visable_gm_base=0x7800000, size=0x8000000
[Â 125.558513]ÂÂÂ hidden_gm_base=0x28000000, size=0x18000000
[Â 125.558513]ÂÂÂ fence_base=4, num=4
[Â 125.580770] vGT info:(vgt_hvm_io_req_handler:795) Received a IOREQ w/o vcpu target
[Â 125.588833] vGT info:(vgt_hvm_io_req_handler:796) Possible a false request from event binding
[Â 125.597841] vGT info:(vgt_handle_default_event_virt:947) IRQ: VM(1) receive event (Pipe A vblank)
(XEN) Enable vGT for domain 1
[Â 125.607297] vGT info:(vgt_emulation_thread:530) start kthread for VM1
[Â 125.609916] vGT(1): create debugfs node: virtual_mmio_space
[Â 125.610177] vGT(1): create debugfs node: shadow_mmio_space
[Â 125.610477] vGT(1): create debugfs node: frame_buffer_format
[Â 125.610771] vGT(1): create debugfs node: frame_buffer_format
[Â 125.639540] vGT info:(vgt_hvm_do_ioreq:747) Recieved a non-VGT ioreq (addr: 0).
[Â 125.639887] vGT info:(vgt_propagate_edid:770) EDID_PROPAGATE: Clear PORT_A for vm 1
[Â 125.640257] vGT info:(vgt_propagate_edid:770) EDID_PROPAGATE: Clear PORT_B for vm 1
[Â 125.640648] vGT info:(vgt_propagate_edid:770) EDID_PROPAGATE: Clear PORT_C for vm 1
[Â 125.640995] vGT info:(vgt_propagate_edid:770) EDID_PROPAGATE: Clear PORT_D for vm 1
[Â 125.641356] vGT info:(vgt_propagate_edid:770) EDID_PROPAGATE: Clear PORT_E for vm 1
[Â 125.686152] vGT info:(vgt_hvm_do_ioreq:748) Possible a false request from event binding
[Â 125.747371] vGT info:(vgt_vport_connection_store:599) Monitor detection: PORT_AÂ is disconnected
[Â 125.805158] vGT info:(vgt_vport_connection_store:599) Monitor detection: PORT_BÂ is disconnected
[Â 125.858339] vGT info:(vgt_handle_default_event_virt:947) IRQ: VM(1) receive event (Blitter Command Streamer MI USER INTERRUPT)
[Â 125.875796] vGT info:(vgt_vport_connection_store:599) Monitor detection: PORT_CÂ is disconnected
[Â 125.955788] vGT info:(vgt_vport_connection_store:599) Monitor detection: PORT_DÂ is disconnected
[Â 125.987165] vGT info:(vgt_handle_default_event_virt:947) IRQ: VM(1) receive event (Render Command Streamer MI USER INTERRUPT)
[Â 126.079496] vGT warning:(pch_adpa_mmio_write:1174) HOTPLUG_FORCE_TRIGGER is set while VGA is enabled!
[Â 126.199310] vGT info:(vgt_vport_connection_store:587) Monitor detection: PORT_EÂ is connected
[Â 126.446515] device vif1.0 entered promiscuous mode
[Â 126.484273] ip_tables: (C) 2000-2006 Netfilter Core Team
[Â 126.772174] device vif1.0-emu entered promiscuous mode
[Â 126.785255] xenbr0: port 3(vif1.0-emu) entered forwarding state
[Â 126.791382] xenbr0: port 3(vif1.0-emu) entered forwarding state
(XEN) HVM1: HVM Loader
(XEN) HVM1: Detected Xen v4.3.1
(XEN) HVM1: Xenbus rings @0xfeffc000, event channel 6
(XEN) HVM1: System requested SeaBIOS
(XEN) HVM1: CPU speed is 1750 MHz
(XEN) HVM1: Relocating guest memory for lowmem MMIO space disabled
(XEN) irq.c:270: Dom1 PCI link 0 changed 0 -> 5
(XEN) HVM1: PCI-ISA link 0 routed to IRQ5
(XEN) irq.c:270: Dom1 PCI link 1 changed 0 -> 10
(XEN) HVM1: PCI-ISA link 1 routed to IRQ10
(XEN) irq.c:270: Dom1 PCI link 2 changed 0 -> 11
(XEN) HVM1: PCI-ISA link 2 routed to IRQ11
(XEN) irq.c:270: Dom1 PCI link 3 changed 0 -> 5
(XEN) HVM1: PCI-ISA link 3 routed to IRQ5
(XEN) HVM1: Detect 0.0 devfn, with class: 600
(XEN) HVM1: Detect 1.0 devfn, with class: 601
(XEN) HVM1: Detect 1.1 devfn, with class: 101
(XEN) HVM1: Detect 1.2 devfn, with class: c03
(XEN) HVM1: pci dev 01:2 INTD->IRQ5
(XEN) HVM1: Detect 1.3 devfn, with class: 680
(XEN) HVM1: pci dev 01:3 INTA->IRQ10
(XEN) HVM1: Detect 2.0 devfn, with class: 300
(XEN) HVM1: Detect Intel Graphics Device
(XEN) HVM1: pci dev 02:0 INTA->IRQ11
(XEN) HVM1: Detect 3.0 devfn, with class: ff80
(XEN) HVM1: pci dev 03:0 INTA->IRQ5
(XEN) HVM1: Detect 4.0 devfn, with class: 200
(XEN) HVM1: pci dev 04:0 INTA->IRQ5
(XEN) HVM1: Detect 1f.0 devfn, with class: 601
(XEN) HVM1: No RAM in high memory; setting high_mem resource base to 100000000
(XEN) HVM1: pci dev 02:0 bar 18 size 010000000: 0c0000008
[Â 127.115871] add_map: domid=1 gfn_s=0xc7800 mfn_s=0xc7800 nr_mfns=0x8000
(XEN) DPCI_ADD_MAPPING_VGT : domid=1 gfn=0xc7800 mfn=0xc7800 nr_mfns=0x8000
(XEN) VGT(1): Add MMIO range [0xd0000000 - 0xd03fffff].
(XEN) DOM 1 MMIO rangeset:
(XEN) I/O Memory Forwarding { d0000000-d03fffff }
(XEN) HVM1: pci dev 03:0 bar 14 size 001000000: 0d0000008
(XEN) VGT(1): Add MMIO range [0xd1000000 - 0xd13fffff].
(XEN) DOM 1 MMIO rangeset:
(XEN) I/O Memory Forwarding { d1000000-d13fffff }
(XEN) HVM1: pci dev 02:0 bar 10 size 000400000: 0d1000000
(XEN) HVM1: pci dev 04:0 bar 30 size 000010000: 0d1400000
(XEN) HVM1: pci dev 03:0 bar 10 size 000000100: 00000c001
(XEN) HVM1: pci dev 04:0 bar 10 size 000000100: 00000c101
(XEN) HVM1: pci dev 04:0 bar 14 size 000000100: 0d1410000
(XEN) HVM1: pci dev 01:2 bar 20 size 000000020: 00000c201
(XEN) HVM1: pci dev 01:1 bar 20 size 000000010: 00000c221
(XEN) HVM1: pci dev 02:0 bar 20 size 000000010: 00000c231
(XEN) HVM1: pci dev 02:0 bar 30 size 000000010: 0d1410100
(XEN) HVM1: Found VGT
[Â 127.267867] vGT info:(vgt_emulate_cfg_write:257) low_mem_max_gpfn: 0x50c00
(XEN) DPCI_ADD_MAPPING_VGT : domid=1 gfn=0xfdffd mfn=0xaf358 nr_mfns=0x1
(XEN) DPCI_ADD_MAPPING_VGT : domid=1 gfn=0xfdffe mfn=0xaf359 nr_mfns=0x1
(XEN) HVM1: Multiprocessor initialisation:
(XEN) HVM1:Â - CPU0 ... 36-bit phys ... fixed MTRRs ... var MTRRs [4/8] ... done.
(XEN) HVM1:Â - CPU1 ... 36-bit phys ... fixed MTRRs ... var MTRRs [4/8] ... done.
(XEN) HVM1: Testing HVM environment:
(XEN) HVM1:Â - REP INSB across page boundaries ... passed
(XEN) HVM1:Â - GS base MSRs and SWAPGS ... passed
(XEN) HVM1: Passed 2 of 2 tests
(XEN) HVM1: Writing SMBIOS tables ...
(XEN) HVM1: Loading SeaBIOS ...
(XEN) HVM1: Creating MP tables ...
(XEN) HVM1: Loading Standard VGABIOS ...
(XEN) HVM1: Loading ACPI ...
(XEN) HVM1: vm86 TSS at fc00a080
(XEN) HVM1: BIOS map:
(XEN) HVM1:Â 10000-100d3: Scratch space
(XEN) HVM1:Â e0000-fffff: Main BIOS
(XEN) HVM1: E820 table:
(XEN) HVM1:Â [00]: 00000000:00000000 - 00000000:000a0000: RAM
(XEN) HVM1:Â HOLE: 00000000:000a0000 - 00000000:000e0000
(XEN) HVM1:Â [01]: 00000000:000e0000 - 00000000:00100000: RESERVED
(XEN) HVM1:Â [02]: 00000000:00100000 - 00000000:50c00000: RAM
(XEN) HVM1:Â HOLE: 00000000:50c00000 - 00000000:fc000000
(XEN) HVM1:Â [03]: 00000000:fc000000 - 00000000:fdffd000: RESERVED
(XEN) HVM1:Â [04]: 00000000:fdffd000 - 00000000:fe000000: NVS
(XEN) HVM1:Â [05]: 00000000:fe000000 - 00000001:00000000: RESERVED
(XEN) HVM1: Invoking SeaBIOS ...
(XEN) HVM1: SeaBIOS (version rel-1.7.1-3-g3a28511-dirty-20160102_234419-vtc-VTC1010)
(XEN) HVM1:
(XEN) HVM1: Found Xen hypervisor signature at 40000000
(XEN) HVM1: xen: copy e820...
(XEN) HVM1: Ram Size=0x50c00000 (0x0000000000000000 high)
(XEN) HVM1: Relocating low data from 0x000e4440 to 0x000ef790 (size 2153)
(XEN) HVM1: Relocating init from 0x000e4ca9 to 0x50be3100 (size 52695)
(XEN) HVM1: CPU Mhz=1751
(XEN) HVM1: Found 9 PCI devices (max PCI bus is 00)
(XEN) HVM1: Allocated Xen hypercall page at 50bff000
(XEN) HVM1: Detected Xen v4.3.1
(XEN) HVM1: xen: copy BIOS tables...
(XEN) HVM1: Copying SMBIOS entry point from 0x00010010 to 0x000fe030
(XEN) HVM1: Copying MPTABLE from 0xfc001160/fc001170 to 0x000fdf30
(XEN) HVM1: Copying PIR from 0x00010030 to 0x000fdeb0
(XEN) HVM1: Copying ACPI RSDP from 0x000100b0 to 0x000fde80
(XEN) HVM1: Scan for VGA option rom
(XEN) HVM1: Running option rom at c000:0003
(XEN) stdvga.c:147:d1 entering stdvga and caching modes
(XEN) HVM1: VGABios $Id: vgabios.c,v 1.67 2008/01/27 09:44:12 vruppert Exp $
(XEN) HVM1: VBE Bios $Id: vbe.c,v 1.60 2008/03/02 07:47:21 vruppert Exp $
(XEN) HVM1: Turning on vga text mode console
(XEN) HVM1: SeaBIOS (version rel-1.7.1-3-g3a28511-dirty-20160102_234419-vtc-VTC1010)
(XEN) HVM1:
(XEN) HVM1: UHCI init on dev 00:01.2 (io=c200)
(XEN) HVM1: Found 1 lpt ports
(XEN) HVM1: Found 1 serial ports
(XEN) HVM1: ATA controller 1 at 1f0/3f4/c220 (irq 14 dev 9)
(XEN) HVM1: ATA controller 2 at 170/374/c228 (irq 15 dev 9)
(XEN) HVM1: ata0-0: QEMU HARDDISK ATA-7 Hard-Disk (10000 MiBytes)
(XEN) HVM1: Searching bootorder for: /pci@i0cf8/*@1,1/drive@0/disk@0
(XEN) HVM1: DVD/CD [ata1-0: QEMU DVD-ROM ATAPI-4 DVD/CD]
(XEN) HVM1: Searching bootorder for: /pci@i0cf8/*@1,1/drive@1/disk@0
(XEN) HVM1: PS2 keyboard initialized
(XEN) HVM1: All threads complete.
(XEN) HVM1: Scan for option roms
(XEN) HVM1: Running option rom at ca00:0003
(XEN) HVM1: pmm call arg1=1
(XEN) HVM1: pmm call arg1=0
(XEN) HVM1: pmm call arg1=1
(XEN) HVM1: pmm call arg1=0
(XEN) HVM1: Searching bootorder for: /pci@i0cf8/*@4
(XEN) HVM1: Press F12 for boot menu.
(XEN) HVM1:
(XEN) HVM1: drive 0x000fde30: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 s=20480000
(XEN) HVM1:
(XEN) HVM1: Space available for UMB: 000cb000-000ee800
(XEN) HVM1: Returned 61440 bytes of ZoneHigh
(XEN) HVM1: e820 map has 8 items:
(XEN) HVM1:ÂÂ 0: 0000000000000000 - 000000000009fc00 = 1 RAM
(XEN) HVM1:ÂÂ 1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED
(XEN) HVM1:ÂÂ 2: 00000000000f0000 - 0000000000100000 = 2 RESERVED
(XEN) HVM1:ÂÂ 3: 0000000000100000 - 0000000050bff000 = 1 RAM
(XEN) HVM1:ÂÂ 4: 0000000050bff000 - 0000000050c00000 = 2 RESERVED
(XEN) HVM1:ÂÂ 5: 00000000fc000000 - 00000000fdffd000 = 2 RESERVED
(XEN) HVM1:ÂÂ 6: 00000000fdffd000 - 00000000fe000000 = 4 NVS
(XEN) HVM1:ÂÂ 7: 00000000fe000000 - 0000000100000000 = 2 RESERVED
(XEN) HVM1: enter handle_19:
(XEN) HVM1:ÂÂ NULL
(XEN) HVM1: Booting from Hard Disk...
(XEN) HVM1: Booting from 0000:7c00
[Â 132.477948] xenbr0: port 1(eth0) entered forwarding state
(XEN) HVM1: Initializing cgroup subsys cpu
(XEN) HVM1: Initializing cgroup subsys cpuacct
(XEN) HVM1: Linux version 3.11.10-android-x86_64+ (iurii@kbp1-lhp-f55441) (gcc version 4.6
(XEN) HVM1: .3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #2 SMP PREEMPT Tue Jan 5 19:05:48 EET 2016
(XEN) HVM1:
(XEN) HVM1: Command line: quiet root=/dev/ram0 androidboot.hardware=android_x86_64 SRC="">
(XEN) HVM1: droid-2016-01-05
(XEN) HVM1: KERNEL supported cpus:
(XEN) HVM1:ÂÂ Intel GenuineIntel
(XEN) HVM1:ÂÂ AMD AuthenticAMD
(XEN) HVM1:ÂÂ Centaur CentaurHauls
(XEN) HVM1: e820: BIOS-provided physical RAM map:
(XEN) HVM1: BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
(XEN) HVM1: BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
(XEN) HVM1: BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
(XEN) HVM1: BIOS-e820: [mem 0x0000000000100000-0x0000000050bfefff] usable
(XEN) HVM1: BIOS-e820: [mem 0x0000000050bff000-0x0000000050bfffff] reserved
(XEN) HVM1: BIOS-e820: [mem 0x00000000fc000000-0x00000000fdffcfff] reserved
(XEN) HVM1: BIOS-e820: [mem 0x00000000fdffd000-0x00000000fdffffff] ACPI NVS
(XEN) HVM1: BIOS-e820: [mem 0x00000000fe000000-0x00000000ffffffff] reserved
(XEN) HVM1: NX (Execute Disable) protection: active
(XEN) HVM1: SMBIOS 2.4 present.
(XEN) HVM1: DMI: Xen HVM domU, BIOS 4.3.1 01/02/2016
(XEN) HVM1: Hypervisor detected: Xen HVM
(XEN) HVM1: Xen version 4.3.
(XEN) HVM1: Xen Platform PCI: I/O protocol version 1
(XEN) HVM1: Netfront and the Xen platform PCI driver have been compiled for this kernel: u
(XEN) HVM1: nplug emulated NICs.
(XEN) HVM1: Blkfront and the Xen platform PCI driver have been compiled for this kernel: u
(XEN) HVM1: nplug emulated disks.
(XEN) HVM1: You might have to change the root device
(XEN) HVM1: from /dev/hd[a-d] to /dev/xvd[a-d]
(XEN) HVM1: in your root= kernel command line option
(XEN) HVM1: HVMOP_pagetable_dying not supported
(XEN) HVM1: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
(XEN) HVM1: e820: remove [mem 0x000a0000-0x000fffff] usable
(XEN) HVM1: No AGP bridge found
(XEN) HVM1: e820: last_pfn = 0x50bff max_arch_pfn = 0x400000000
(XEN) HVM1: MTRR default type: write-back
(XEN) HVM1: MTRR fixed ranges enabled:
(XEN) HVM1:ÂÂ 00000-9FFFF write-back
(XEN) HVM1:ÂÂ A0000-BFFFF write-combining
(XEN) HVM1:ÂÂ C0000-FFFFF write-back
(XEN) HVM1: MTRR variable ranges enabled:
(XEN) HVM1:ÂÂ 0 base 0C0000000 mask FE0000000 uncachable
(XEN) HVM1:ÂÂ 1 base 0E0000000 mask FF0000000 uncachable
(XEN) HVM1:ÂÂ 2 base 0F0000000 mask FF8000000 uncachable
(XEN) HVM1:ÂÂ 3 base 0F8000000 mask FFC000000 uncachable
(XEN) HVM1:ÂÂ 4 disabled
(XEN) HVM1:ÂÂ 5 disabled
(XEN) HVM1:ÂÂ 6 disabled
(XEN) HVM1:ÂÂ 7 disabled
(XEN) HVM1: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
(XEN) HVM1: found SMP MP-table at [mem 0x000fdf30-0x000fdf3f] mapped at [ffff8800000fdf30]
(XEN) HVM1:
(XEN) HVM1: Base memory trampoline at [ffff880000099000] 99000 size 24576
(XEN) HVM1: init_memory_mapping: [mem 0x00000000-0x000fffff]
(XEN) HVM1:Â [mem 0x00000000-0x000fffff] page 4k
(XEN) HVM1: BRK [0x01bcb000, 0x01bcbfff] PGTABLE
(XEN) HVM1: BRK [0x01bcc000, 0x01bccfff] PGTABLE
(XEN) HVM1: BRK [0x01bcd000, 0x01bcdfff] PGTABLE
(XEN) HVM1: init_memory_mapping: [mem 0x50800000-0x509fffff]
(XEN) HVM1:Â [mem 0x50800000-0x509fffff] page 2M
(XEN) HVM1: BRK [0x01bce000, 0x01bcefff] PGTABLE
(XEN) HVM1: init_memory_mapping: [mem 0x50000000-0x507fffff]
(XEN) HVM1:Â [mem 0x50000000-0x507fffff] page 2M
(XEN) HVM1: init_memory_mapping: [mem 0x00100000-0x4fffffff]
(XEN) HVM1:Â [mem 0x00100000-0x001fffff] page 4k
(XEN) HVM1:Â [mem 0x00200000-0x4fffffff] page 2M
(XEN) HVM1: init_memory_mapping: [mem 0x50a00000-0x50bfefff]
(XEN) HVM1:Â [mem 0x50a00000-0x50bfefff] page 4k
(XEN) HVM1: BRK [0x01bcf000, 0x01bcffff] PGTABLE
(XEN) HVM1: RAMDISK: [mem 0x50aa3000-0x50beefff]
(XEN) HVM1: ACPI: Local APIC address 0xfee00000
(XEN) HVM1:Â [ffffea0000000000-ffffea00013fffff] PMD -> [ffff88004ec00000-ffff88004fffffff
(XEN) HVM1: ] on node 0
(XEN) HVM1: Zone ranges:
(XEN) HVM1:ÂÂ DMAÂÂÂÂÂ [mem 0x00001000-0x00ffffff]
(XEN) HVM1:ÂÂ DMA32ÂÂÂ [mem 0x01000000-0xffffffff]
(XEN) HVM1:ÂÂ NormalÂÂ empty
(XEN) HVM1: Movable zone start for each node
(XEN) HVM1: Early memory node ranges
(XEN) HVM1:ÂÂ nodeÂÂ 0: [mem 0x00001000-0x0009efff]
(XEN) HVM1:ÂÂ nodeÂÂ 0: [mem 0x00100000-0x50bfefff]
(XEN) HVM1: On node 0 totalpages: 330653
(XEN) HVM1:ÂÂ DMA zone: 56 pages used for memmap
(XEN) HVM1:ÂÂ DMA zone: 21 pages reserved
(XEN) HVM1:ÂÂ DMA zone: 3998 pages, LIFO batch:0
(XEN) HVM1:ÂÂ DMA32 zone: 4466 pages used for memmap
(XEN) HVM1:ÂÂ DMA32 zone: 326655 pages, LIFO batch:31
(XEN) HVM1: ACPI: PM-Timer IO Port: 0xb008
(XEN) HVM1: ACPI: Local APIC address 0xfee00000
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x08] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x05] lapic_id[0x0a] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x06] lapic_id[0x0c] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x07] lapic_id[0x0e] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x08] lapic_id[0x10] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x09] lapic_id[0x12] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x14] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x16] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x18] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x1a] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x1c] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x1e] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x10] lapic_id[0x20] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x11] lapic_id[0x22] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x12] lapic_id[0x24] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x13] lapic_id[0x26] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x14] lapic_id[0x28] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x15] lapic_id[0x2a] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x16] lapic_id[0x2c] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x17] lapic_id[0x2e] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x18] lapic_id[0x30] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x19] lapic_id[0x32] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x34] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x36] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x38] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x3a] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x3c] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x3e] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x20] lapic_id[0x40] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x21] lapic_id[0x42] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x22] lapic_id[0x44] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x23] lapic_id[0x46] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x24] lapic_id[0x48] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x25] lapic_id[0x4a] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x26] lapic_id[0x4c] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x27] lapic_id[0x4e] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x28] lapic_id[0x50] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x29] lapic_id[0x52] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x2a] lapic_id[0x54] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x2b] lapic_id[0x56] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x2c] lapic_id[0x58] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x2d] lapic_id[0x5a] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x2e] lapic_id[0x5c] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x2f] lapic_id[0x5e] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x30] lapic_id[0x60] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x31] lapic_id[0x62] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x32] lapic_id[0x64] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x33] lapic_id[0x66] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x34] lapic_id[0x68] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x35] lapic_id[0x6a] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x36] lapic_id[0x6c] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x37] lapic_id[0x6e] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x38] lapic_id[0x70] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x39] lapic_id[0x72] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x3a] lapic_id[0x74] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x3b] lapic_id[0x76] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x3c] lapic_id[0x78] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x3d] lapic_id[0x7a] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x3e] lapic_id[0x7c] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x3f] lapic_id[0x7e] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x40] lapic_id[0x80] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x41] lapic_id[0x82] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x42] lapic_id[0x84] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x43] lapic_id[0x86] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x44] lapic_id[0x88] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x45] lapic_id[0x8a] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x46] lapic_id[0x8c] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x47] lapic_id[0x8e] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x48] lapic_id[0x90] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x49] lapic_id[0x92] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x4a] lapic_id[0x94] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x4b] lapic_id[0x96] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x4c] lapic_id[0x98] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x4d] lapic_id[0x9a] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x4e] lapic_id[0x9c] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x4f] lapic_id[0x9e] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x50] lapic_id[0xa0] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x51] lapic_id[0xa2] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x52] lapic_id[0xa4] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x53] lapic_id[0xa6] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x54] lapic_id[0xa8] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x55] lapic_id[0xaa] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x56] lapic_id[0xac] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x57] lapic_id[0xae] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x58] lapic_id[0xb0] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x59] lapic_id[0xb2] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x5a] lapic_id[0xb4] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x5b] lapic_id[0xb6] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x5c] lapic_id[0xb8] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x5d] lapic_id[0xba] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x5e] lapic_id[0xbc] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x5f] lapic_id[0xbe] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x60] lapic_id[0xc0] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x61] lapic_id[0xc2] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x62] lapic_id[0xc4] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x63] lapic_id[0xc6] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x64] lapic_id[0xc8] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x65] lapic_id[0xca] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x66] lapic_id[0xcc] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x67] lapic_id[0xce] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x68] lapic_id[0xd0] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x69] lapic_id[0xd2] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x6a] lapic_id[0xd4] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x6b] lapic_id[0xd6] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x6c] lapic_id[0xd8] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x6d] lapic_id[0xda] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x6e] lapic_id[0xdc] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x6f] lapic_id[0xde] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x70] lapic_id[0xe0] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x71] lapic_id[0xe2] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x72] lapic_id[0xe4] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x73] lapic_id[0xe6] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x74] lapic_id[0xe8] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x75] lapic_id[0xea] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x76] lapic_id[0xec] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x77] lapic_id[0xee] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x78] lapic_id[0xf0] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x79] lapic_id[0xf2] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x7a] lapic_id[0xf4] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x7b] lapic_id[0xf6] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x7c] lapic_id[0xf8] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x7d] lapic_id[0xfa] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x7e] lapic_id[0xfc] disabled)
(XEN) HVM1: ACPI: LAPIC (acpi_id[0x7f] lapic_id[0xfe] disabled)
(XEN) HVM1: ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
(XEN) HVM1: IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-47
(XEN) HVM1: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) HVM1: ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 low level)
(XEN) HVM1: ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 low level)
(XEN) HVM1: ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level)
(XEN) HVM1: ACPI: IRQ0 used by override.
(XEN) HVM1: ACPI: IRQ2 used by override.
(XEN) HVM1: ACPI: IRQ5 used by override.
(XEN) HVM1: ACPI: IRQ9 used by override.
(XEN) HVM1: ACPI: IRQ10 used by override.
(XEN) HVM1: ACPI: IRQ11 used by override.
(XEN) HVM1: Using ACPI (MADT) for SMP configuration information
(XEN) HVM1: ACPI: HPET id: 0x8086a201 base: 0xfed00000
(XEN) HVM1: smpboot: 128 Processors exceeds NR_CPUS limit of 8
(XEN) HVM1: smpboot: Allowing 8 CPUs, 6 hotplug CPUs
(XEN) HVM1: nr_irqs_gsi: 64
(XEN) HVM1: e820: [mem 0x50c00000-0xfbffffff] available for PCI devices
(XEN) HVM1: Booting paravirtualized kernel on Xen HVM
(XEN) HVM1: setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
(XEN) HVM1: PERCPU: Embedded 28 pages/cpu @ffff880050800000 s84736 r8192 d21760 u262144
(XEN) HVM1: pcpu-alloc: s84736 r8192 d21760 u262144 alloc=1*2097152
(XEN) HVM1: pcpu-alloc: [0] 0 1 2 3 4 5 6 7
(XEN) HVM1: Built 1 zonelists in Zone order, mobility grouping on. Total pages: 326110
(XEN) HVM1: Kernel command line: quiet root=/dev/ram0 androidboot.hardware=android_x86_64
(XEN) HVM1: SRC="">
(XEN) HVM1: PID hash table entries: 4096 (order: 3, 32768 bytes)
(XEN) HVM1: Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
(XEN) HVM1: Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
(XEN) HVM1: Checking aperture...
(XEN) HVM1: No AGP bridge found
(XEN) HVM1: Calgary: detecting Calgary via BIOS EBDA area
(XEN) HVM1: Calgary: Unable to locate Rio Grande table in EBDA - bailing!
(XEN) HVM1: Memory: 1284552K/1322612K available (6057K kernel code, 799K rwdata, 3272K rod
(XEN) HVM1: ata, 968K init, 932K bss, 38060K reserved)
(XEN) HVM1: Preemptible hierarchical RCU implementation.
(XEN) HVM1:ÂÂÂÂ CONFIG_RCU_FANOUT set to non-default value of 32
(XEN) HVM1:ÂÂÂÂ RCU dyntick-idle grace-period acceleration is enabled.
(XEN) HVM1:ÂÂÂÂ Offload RCU callbacks from all CPUs
(XEN) HVM1:ÂÂÂÂ Offload RCU callbacks from CPUs: 0-7.
(XEN) HVM1: NR_IRQS:4352 nr_irqs:1152 16
(XEN) irq.c:375: Dom1 callback via changed to Direct Vector 0xf3
(XEN) HVM1: xen:events: Xen HVM callback vector for event delivery is enabled
(XEN) HVM1: Console: colour VGA+ 80x25
(XEN) HVM1: console [tty0] enabled
(XEN) HVM1: hpet clockevent registered
(XEN) HVM1: tsc: Detected 1750.017 MHz processor
(XEN) HVM1: Calibrating delay loop (skipped), value calculated using timer frequency.. 350
(XEN) HVM1: 0.03 BogoMIPS (lpj=1750017)
(XEN) HVM1: pid_max: default: 32768 minimum: 301
(XEN) HVM1: Security Framework initialized
(XEN) HVM1: Mount-cache hash table entries: 256
(XEN) HVM1: Initializing cgroup subsys debug
(XEN) HVM1: Initializing cgroup subsys freezer
(XEN) HVM1: CPU: Physical Processor ID: 0
(XEN) HVM1: CPU: Processor Core ID: 0
(XEN) HVM1: mce: CPU supports 2 MCE banks
(XEN) HVM1: Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
(XEN) HVM1: Last level dTLB entries: 4KB 128, 2MB 0, 4MB 0
(XEN) HVM1: tlb_flushall_shift: 6
(XEN) HVM1: Freeing SMP alternatives memory: 24K (ffffffff81ada000 - ffffffff81ae0000)
(XEN) HVM1: ACPI: Core revision 20130517
(XEN) HVM1: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
(XEN) HVM1: smpboot: CPU0: Intel(R) Atom(TM) CPUÂ E3827Â @ 1.74GHz (fam: 06, model: 37, st
(XEN) HVM1: epping: 09)
(XEN) HVM1: Xen: using vcpuop timer interface
(XEN) HVM1: installing Xen timer for CPU 0
(XEN) HVM1: Performance Events: unsupported p6 CPU model 55 no PMU driver, software events
(XEN) HVM1:Â only.
(XEN) HVM1: NMI watchdog: disabled (cpu0): hardware events not enabled
(XEN) HVM1: installing Xen timer for CPU 1
(XEN) HVM1: smpboot: Booting Node 0, Processors #1Brought up 2 CPUs
(XEN) HVM1: smpboot: Total of 2 processors activated (7000.06 BogoMIPS)
(XEN) HVM1: PM: Registering ACPI NVS region [mem 0xfdffd000-0xfdffffff] (12288 bytes)
(XEN) HVM1: regulator-dummy: no parameters
(XEN) HVM1: RTC time: 16:41:07, date: 01/13/16
(XEN) HVM1: NET: Registered protocol family 16
(XEN) HVM1: ACPI: bus type PCI registered
(XEN) HVM1: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
(XEN) VGT_WARNING: vgt_intercept_cf8_cfc bytes=1 not 4 bytes
(XEN) HVM1: PCI: Using configuration type 1 for base access
(XEN) HVM1: bio: create slab <bio-0> at 0
(XEN) HVM1: ACPI: Added _OSI(Module Device)
(XEN) HVM1: ACPI: Added _OSI(Processor Device)
(XEN) HVM1: ACPI: Added _OSI(3.0 _SCP Extensions)
(XEN) HVM1: ACPI: Added _OSI(Processor Aggregator Device)
(XEN) HVM1: ACPI: EC: Look up EC in DSDT
(XEN) HVM1: ACPI: Interpreter enabled
[Â 141.817444] x(XEN) HVM1: ACPI: (supports S0 S3 S5)
enbr0: port 3(vi(XEN) HVM1: ACPI: Using IOAPIC for interrupt routing
f1.0-emu) entered forwarding sta(XEN) HVM1: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and re
te
(XEN) HVM1: port a bug
(XEN) HVM1: ACPI: No dock devices found.
(XEN) HVM1: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
(XEN) HVM1: acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPMSUB
(XEN) HVM1: SYSTEM=acpiDEVICE=+acpi:PNP0A03:00
(XEN) HVM1: acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)SUBSY
(XEN) HVM1: STEM=acpiDEVICE=+acpi:PNP0A03:00
(XEN) HVM1: acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI c
(XEN) HVM1: onfiguration space under this bridge.SUBSYSTEM=acpiDEVICE=+acpi:PNP0A03:00
(XEN) HVM1: acpiphp: Slot [1] registered
(XEN) HVM1: acpiphp: Slot [2] registered
(XEN) HVM1: acpiphp: Slot [3] registered
(XEN) HVM1: acpiphp: Slot [4] registered
(XEN) HVM1: acpiphp: Slot [5] registered
(XEN) HVM1: acpiphp: Slot [6] registered
(XEN) HVM1: acpiphp: Slot [7] registered
(XEN) HVM1: acpiphp: Slot [8] registered
(XEN) HVM1: acpiphp: Slot [9] registered
(XEN) HVM1: acpiphp: Slot [10] registered
(XEN) HVM1: acpiphp: Slot [11] registered
(XEN) HVM1: acpiphp: Slot [12] registered
(XEN) HVM1: acpiphp: Slot [13] registered
(XEN) HVM1: acpiphp: Slot [14] registered
(XEN) HVM1: acpiphp: Slot [15] registered
(XEN) HVM1: acpiphp: Slot [16] registered
(XEN) HVM1: acpiphp: Slot [17] registered
(XEN) HVM1: acpiphp: Slot [18] registered
(XEN) HVM1: acpiphp: Slot [19] registered
(XEN) HVM1: acpiphp: Slot [20] registered
(XEN) HVM1: acpiphp: Slot [21] registered
(XEN) HVM1: acpiphp: Slot [22] registered
(XEN) HVM1: acpiphp: Slot [23] registered
(XEN) HVM1: acpiphp: Slot [24] registered
(XEN) HVM1: acpiphp: Slot [25] registered
(XEN) HVM1: acpiphp: Slot [26] registered
(XEN) HVM1: acpiphp: Slot [27] registered
(XEN) HVM1: acpiphp: Slot [28] registered
(XEN) HVM1: acpiphp: Slot [29] registered
(XEN) HVM1: acpiphp: Slot [30] registered
(XEN) HVM1: acpiphp: Slot [31] registered
(XEN) HVM1: PCI host bridge to bus 0000:00
(XEN) HVM1: pci_bus 0000:00: root bus resource [bus 00-ff]SUBSYSTEM=pci_busDEVICE=+pci_bus
(XEN) HVM1: :0000:00
(XEN) HVM1: pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]SUBSYSTEM=pci_busDEVICE=
(XEN) HVM1: +pci_bus:0000:00
(XEN) HVM1: pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]SUBSYSTEM=pci_busDEVICE=
(XEN) HVM1: +pci_bus:0000:00
(XEN) HVM1: pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]SUBSYSTEM=pci_bu
(XEN) HVM1: sDEVICE=+pci_bus:0000:00
(XEN) HVM1: pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfbffffff]SUBSYSTEM=pci_bu
(XEN) HVM1: sDEVICE=+pci_bus:0000:00
(XEN) HVM1: pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000SUBSYSTEM=pciDEVICE=+pci:0
(XEN) HVM1: 000:00:00.0
(XEN) HVM1: pci 0000:00:01.0: [8086:7000] type 00 class 0x060100SUBSYSTEM=pciDEVICE=+pci:0
(XEN) HVM1: 000:00:01.0
(XEN) HVM1: pci 0000:00:01.1: [8086:7010] type 00 class 0x010180SUBSYSTEM=pciDEVICE=+pci:0
(XEN) HVM1: 000:00:01.1
(XEN) HVM1: pci 0000:00:01.1: reg 0x20: [io 0xc220-0xc22f]SUBSYSTEM=pciDEVICE=+pci:0000:0
(XEN) HVM1: 0:01.1
(XEN) HVM1: pci 0000:00:01.2: [8086:7020] type 00 class 0x0c0300SUBSYSTEM=pciDEVICE=+pci:0
(XEN) HVM1: 000:00:01.2
(XEN) HVM1: pci 0000:00:01.2: reg 0x20: [io 0xc200-0xc21f]SUBSYSTEM=pciDEVICE=+pci:0000:0
(XEN) HVM1: 0:01.2
(XEN) HVM1: pci 0000:00:01.3: [8086:7113] type 00 class 0x068000SUBSYSTEM=pciDEVICE=+pci:0
(XEN) HVM1: 000:00:01.3
(XEN) HVM1: pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPISUBSYSTEM=pc
(XEN) HVM1: iDEVICE=+pci:0000:00:01.3
(XEN) HVM1: pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMBSUBSYSTEM=pci
(XEN) HVM1: DEVICE=+pci:0000:00:01.3
(XEN) HVM1: pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000SUBSYSTEM=pciDEVICE=+pci:0
(XEN) HVM1: 000:00:02.0
(XEN) VGT(1): Add MMIO range [0xd1000000 - 0xd13fffff].
(XEN) DOM 1 MMIO rangeset:
(XEN) I/O Memory Forwarding { d1000000-d13fffff }
(XEN) HVM1: pci 0000:00:02.0: reg 0x10: [mem 0xd1000000-0xd13fffff]SUBSYSTEM=pciDEVICE=+pc
(XEN) HVM1: i:0000:00:02.0
(XEN) VGT(1): Add MMIO range [0xd1000000 - 0xd13fffff].
(XEN) DOM 1 MMIO rangeset:
(XEN) I/O Memory Forwarding { d1000000-d13fffff }
(XEN) VGT(1): Add MMIO range [0xd1000000 - 0xd13fffff].
(XEN) DOM 1 MMIO rangeset:
(XEN) I/O Memory Forwarding { d1000000-d13fffff }
(XEN) HVM1: pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff pref]SUBSYSTEM=pciDEVIC
(XEN) HVM1: E=+pci:0000:00:02.0
(XEN) VGT(1): Add MMIO range [0xd1000000 - 0xd13fffff].
(XEN) DOM 1 MMIO rangeset:
(XEN) I/O Memory Forwarding { d1000000-d13fffff }
(XEN) VGT(1): Add MMIO range [0xd1000000 - 0xd13fffff].
(XEN) DOM 1 MMIO rangeset:
(XEN) I/O Memory Forwarding { d1000000-d13fffff }
(XEN) HVM1: pci 0000:00:02.0: reg 0x20: [io 0xc230-0xc23f]SUBSYSTEM=pciDEVICE=+pci:0000:0
(XEN) HVM1: 0:02.0
(XEN) VGT(1): Add MMIO range [0xd1000000 - 0xd13fffff].
(XEN) DOM 1 MMIO rangeset:
(XEN) I/O Memory Forwarding { d1000000-d13fffff }
(XEN) VGT(1): Add MMIO range [0xd1000000 - 0xd13fffff].
(XEN) DOM 1 MMIO rangeset:
(XEN) I/O Memory Forwarding { d1000000-d13fffff }
(XEN) HVM1: pci 0000:00:02.0: reg 0x30: [mem 0xd1410000-0xd14107ff pref]SUBSYSTEM=pciDEVIC
(XEN) HVM1: E=+pci:0000:00:02.0
(XEN) HVM1: pci 0000:00:03.0: [5853:0001] type 00 class 0xff8000SUBSYSTEM=pciDEVICE=+pci:0
(XEN) HVM1: 000:00:03.0
(XEN) HVM1: pci 0000:00:03.0: reg 0x10: [io 0xc000-0xc0ff]SUBSYSTEM=pciDEVICE=+pci:0000:0
(XEN) HVM1: 0:03.0
(XEN) HVM1: pci 0000:00:03.0: reg 0x14: [mem 0xd0000000-0xd0ffffff pref]SUBSYSTEM=pciDEVIC
(XEN) HVM1: E=+pci:0000:00:03.0
(XEN) HVM1: pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100SUBSYSTEM=pciDEVICE=+pci:0
(XEN) HVM1: 000:00:1f.0
(XEN) HVM1: pci_bus 0000:00: on NUMA node 0SUBSYSTEM=pci_busDEVICE=+pci_bus:0000:00
(XEN) HVM1: ACPI: PCI Interrupt Link [LNKA] (IRQs *5 10 11)
(XEN) irq.c:270: Dom1 PCI link 0 changed 5 -> 0
(XEN) HVM1: ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
(XEN) irq.c:270: Dom1 PCI link 1 changed 10 -> 0
(XEN) HVM1: ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
(XEN) irq.c:270: Dom1 PCI link 2 changed 11 -> 0
(XEN) HVM1: ACPI: PCI Interrupt Link [LNKD] (IRQs *5 10 11)
(XEN) irq.c:270: Dom1 PCI link 3 changed 5 -> 0
(XEN) HVM1: ACPI: \_SB_.PCI0: notify handler is installed
(XEN) HVM1: Found 1 acpi root devices
(XEN) HVM1: xen:balloon: Initialising balloon driver
(XEN) HVM1: xen_balloon: Initialising balloon driver
(XEN) HVM1: vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
(XEN) HVM1: vgaarb: loaded
(XEN) HVM1: vgaarb: bridge control possible 0000:00:02.0
(XEN) HVM1: SCSI subsystem initialized
(XEN) HVM1: ACPI: bus type ATA registered
(XEN) HVM1: libata version 3.00 loaded.
(XEN) HVM1: ACPI: bus type USB registered
(XEN) HVM1: usbcore: registered new interface driver usbfs
(XEN) HVM1: usbcore: registered new interface driver hub
(XEN) HVM1: usbcore: registered new device driver usb
(XEN) HVM1: media: Linux media interface: v0.10
(XEN) HVM1: Linux video capture interface: v2.00
(XEN) HVM1: PCI: Using ACPI for IRQ routing
(XEN) HVM1: PCI: pci_cache_line_size set to 64 bytes
(XEN) HVM1: e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
(XEN) HVM1: e820: reserve RAM buffer [mem 0x50bff000-0x53ffffff]
(XEN) HVM1: HPET: 3 timers in total, 0 timers will be used for per-cpu timer
(XEN) HVM1: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
(XEN) HVM1: hpet0: 3 comparators, 64-bit 62.500000 MHz counter
(XEN) HVM1: Switched to clocksource xen
(XEN) HVM1: pnp: PnP ACPI init
(XEN) HVM1: ACPI: bus type PNP registered
(XEN) HVM1: system 00:00: [mem 0x00000000-0x0009ffff] could not be reservedSUBSYSTEM=pnpDE
(XEN) HVM1: VICE=+pnp:00:00
(XEN) HVM1: system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)SUBSYSTEM=pnpDEVI
(XEN) HVM1: CE=+pnp:00:00
(XEN) HVM1: pnp 00:01: Plug and Play ACPI device, IDs PNP0103 (active)SUBSYSTEM=pnpDEVICE=
(XEN) HVM1: +pnp:00:01
(XEN) HVM1: system 00:02: [io 0x08a0-0x08a3] has been reservedSUBSYSTEM=pnpDEVICE=+pnp:00
(XEN) HVM1: :02
(XEN) HVM1: system 00:02: [io 0x0cc0-0x0ccf] has been reservedSUBSYSTEM=pnpDEVICE=+pnp:00
(XEN) HVM1: :02
(XEN) HVM1: system 00:02: [io 0x04d0-0x04d1] has been reservedSUBSYSTEM=pnpDEVICE=+pnp:00
(XEN) HVM1: :02
(XEN) HVM1: system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)SUBSYSTEM=pnpDEVI
(XEN) HVM1: CE=+pnp:00:02
(XEN) HVM1: pnp 00:03: [dma 4]SUBSYSTEM=pnpDEVICE=+pnp:00:03
(XEN) HVM1: pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)SUBSYSTEM=pnpDEVICE=
(XEN) HVM1: +pnp:00:03
(XEN) HVM1: xen: --> pirq=16 -> irq=8 (gsi=8)
(XEN) HVM1: pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)SUBSYSTEM=pnpDEVICE=
(XEN) HVM1: +pnp:00:04
(XEN) HVM1: pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)SUBSYSTEM=pnpDEVICE=
(XEN) HVM1: +pnp:00:05
(XEN) HVM1: xen: --> pirq=17 -> irq=12 (gsi=12)
(XEN) HVM1: pnp 00:06: Plug and Play ACPI device, IDs PNP0f13 (active)SUBSYSTEM=pnpDEVICE=
(XEN) HVM1: +pnp:00:06
(XEN) HVM1: xen: --> pirq=18 -> irq=1 (gsi=1)
(XEN) HVM1: pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)SUBSYSTEM=pn
(XEN) HVM1: pDEVICE=+pnp:00:07
(XEN) HVM1: xen: --> pirq=19 -> irq=6 (gsi=6)
(XEN) HVM1: pnp 00:08: [dma 2]SUBSYSTEM=pnpDEVICE=+pnp:00:08
(XEN) HVM1: pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active)SUBSYSTEM=pnpDEVICE=
(XEN) HVM1: +pnp:00:08
(XEN) HVM1: xen: --> pirq=20 -> irq=4 (gsi=4)
(XEN) HVM1: pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)SUBSYSTEM=pnpDEVICE=
(XEN) HVM1: +pnp:00:09
(XEN) HVM1: xen: --> pirq=21 -> irq=7 (gsi=7)
(XEN) HVM1: pnp 00:0a: Plug and Play ACPI device, IDs PNP0400 (active)SUBSYSTEM=pnpDEVICE=
(XEN) HVM1: +pnp:00:0a
(XEN) HVM1: system 00:0b: [io 0xae00-0xae0f] has been reservedSUBSYSTEM=pnpDEVICE=+pnp:00
(XEN) HVM1: :0b
(XEN) HVM1: system 00:0b: [io 0xb044-0xb047] has been reservedSUBSYSTEM=pnpDEVICE=+pnp:00
(XEN) HVM1: :0b
(XEN) HVM1: system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)SUBSYSTEM=pnpDEVI
(XEN) HVM1: CE=+pnp:00:0b
(XEN) HVM1: pnp: PnP ACPI: found 12 devices
(XEN) HVM1: ACPI: bus type PNP unregistered
(XEN) HVM1: pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]SUBSYSTEM=pci_busDEVICE=+pci_bu
(XEN) HVM1: s:0000:00
(XEN) HVM1: pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]SUBSYSTEM=pci_busDEVICE=+pci_bu
(XEN) HVM1: s:0000:00
(XEN) HVM1: pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]SUBSYSTEM=pci_busDEVICE
(XEN) HVM1: =+pci_bus:0000:00
(XEN) HVM1: pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfbffffff]SUBSYSTEM=pci_busDEVICE
(XEN) HVM1: =+pci_bus:0000:00
(XEN) HVM1: NET: Registered protocol family 2
(XEN) HVM1: TCP established hash table entries: 16384 (order: 6, 262144 bytes)
(XEN) HVM1: TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
(XEN) HVM1: TCP: Hash tables configured (established 16384 bind 16384)
(XEN) HVM1: TCP: reno registered
(XEN) HVM1: UDP hash table entries: 1024 (order: 3, 32768 bytes)
(XEN) HVM1: UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
(XEN) HVM1: NET: Registered protocol family 1
(XEN) HVM1: pci 0000:00:01.0: Activating ISA DMA hang workaroundsSUBSYSTEM=pciDEVICE=+pci:
(XEN) HVM1: 0000:00:01.0
(XEN) HVM1: xen: --> pirq=22 -> irq=23 (gsi=23)
(XEN) HVM1: pci 0000:00:02.0: Boot video deviceSUBSYSTEM=pciDEVICE=+pci:0000:00:02.0
(XEN) HVM1: PCI: CLS 0 bytes, default 64
(XEN) HVM1: Trying to unpack rootfs image as initramfs...
(XEN) HVM1: Freeing initrd memory: 1328K (ffff880050aa3000 - ffff880050bef000)
(XEN) HVM1: microcode: CPU0 sig=0x30679, pf=0x1, revision=0x901
(XEN) HVM1: microcode: CPU1 sig=0x30679, pf=0x1, revision=0x901
(XEN) HVM1: microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter
(XEN) HVM1:Â Oruba
(XEN) HVM1: sha1_ssse3: Using SSSE3 optimized SHA-1 implementation
(XEN) HVM1: sha256_ssse3: Using SSSE3 optimized SHA-256 implementation
(XEN) HVM1: sha512_ssse3: Using SSSE3 optimized SHA-512 implementation
(XEN) HVM1: AVX instructions are not detected.
(XEN) HVM1: VFS: Disk quotas dquot_6.5.2
(XEN) HVM1: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
(XEN) HVM1: squashfs: version 4.0 (2009/01/31) Phillip Lougher
(XEN) HVM1: fuse init (API version 7.22)
(XEN) HVM1: msgmni has been set to 2511
(XEN) HVM1: io scheduler noop registered
(XEN) HVM1: io scheduler deadline registered
(XEN) HVM1: io scheduler cfq registered (default)
(XEN) HVM1: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
(XEN) HVM1: intel_idle: does not run on family 6 model 55
(XEN) HVM1: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
(XEN) HVM1: ACPI: Power Button [PWRF]
(XEN) HVM1: input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
(XEN) HVM1: ACPI: Sleep Button [SLPF]
(XEN) HVM1: xen:xen_evtchn: Event-channel device installed
(XEN) HVM1: xen: --> pirq=23 -> irq=28 (gsi=28)
(XEN) HVM1: xen:grant_table: Grant tables using version 1 layout
(XEN) HVM1: Grant table initialized
(XEN) HVM1: Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
(XEN) HVM1: 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
(XEN) HVM1: Linux agpgart interface v0.103
(XEN) HVM1: [drm] Initialized drm 1.1.0 20060810
(XEN) HVM1: Eddie: i915_initi915_init
(XEN) HVM1: Eddie: -------------
(XEN) HVM1: i915: xen_start_vgt done
(XEN) HVM1: xen: --> pirq=24 -> irq=24 (gsi=24)
(XEN) HVM1: [drm] Memory usable by graphics device = 2048M
(XEN) HVM1: i915 0000:00:02.0: setting latency timer to 64SUBSYSTEM=pciDEVICE=+pci:0000:00
(XEN) HVM1: :02.0
(XEN) HVM1: i915: intel_detect_pch
(XEN) HVM1: i915: find pch with devfn(8), device(7000)
(XEN) HVM1: i915: find pch with devfn(f8), device(f1c)
[Â 143.862496] vGT warning:(vgt_hvm_vmem_init:301) VM1: vmem_sz=0xfffff000!
(XEN) HVM1: tsc: Refined TSC clocksource calibration: 1750.006 MHz
(XEN) HVM1: i915: the number of the fence registers (4)
(XEN) HVM1: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
(XEN) HVM1: [drm] Driver supports precise vblank timestamp query.
(XEN) HVM1: vGT: setup vGT irq hook in valleyview_irq_preinstall
(XEN) HVM1: vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+
(XEN) HVM1: mem:owns=io+mem
(XEN) HVM1: [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq
(XEN) HVM1: : 0)!
(XEN) HVM1: [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq
(XEN) HVM1: : 0)!
(XEN) HVM1: [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq
(XEN) HVM1: : 0)!
(XEN) HVM1: [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq
(XEN) HVM1: : 0)!
(XEN) HVM1: [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq
(XEN) HVM1: : 0)!
(XEN) HVM1: [drm:intel_dp_aux_ch] *ERROR* dp_aux_ch receive error status 0xd2350064
(XEN) HVM1: ------------[ cut here ]------------
(XEN) HVM1: WARNING: CPU: 1 PID: 1 at /home/iurii/work/intel/android-x86/kernel/drivers/gp
(XEN) HVM1: u/drm/i915/intel_dp.c:357 intel_dp_aux_ch+0x57e/0x585()
(XEN) HVM1: dp_aux_ch not started status 0xd2350064
(XEN) HVM1: Modules linked in:
(XEN) HVM1: CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.11.10-android-x86_64+ #2
(XEN) HVM1: Hardware name: Xen HVM domU, BIOS 4.3.1 01/02/2016
(XEN) HVM1:Â 0000000000000000 ffffffff81883df2 ffffffff815df26e ffff8800500bd818
(XEN) HVM1:Â ffffffff81076650 0000000000000000 ffffffff81383a9c dead000000200200
(XEN) HVM1:Â ffff88004e0380c0 0000000000000005 ffff88004e444000 0000000000000000
(XEN) HVM1: Call Trace:
(XEN) HVM1:Â [<ffffffff815df26e>] ? dump_stack+0x50/0x80
(XEN) HVM1:Â [<ffffffff81076650>] ? warn_slowpath_common+0x79/0x92
(XEN) HVM1:Â [<ffffffff81383a9c>] ? intel_dp_aux_ch+0x57e/0x585
(XEN) HVM1:Â [<ffffffff81076701>] ? warn_slowpath_fmt+0x45/0x4a
(XEN) HVM1:Â [<ffffffff8134db5a>] ? i915_read32+0x112/0x182
(XEN) HVM1:Â [<ffffffff81383a9c>] ? intel_dp_aux_ch+0x57e/0x585
(XEN) HVM1:Â [<ffffffff81383a61>] ? intel_dp_aux_ch+0x543/0x585
(XEN) HVM1:Â [<ffffffff81383e6d>] ? intel_dp_i2c_aux_ch+0xbf/0x211
(XEN) HVM1:Â [<ffffffff81334571>] ? i2c_algo_dp_aux_stop+0x1d/0x22
(XEN) HVM1:Â [<ffffffff81334667>] ? i2c_dp_aux_add_bus+0x3a/0x43
(XEN) HVM1:Â [<ffffffff81385caa>] ? intel_dp_init_connector+0x34b/0xad1
(XEN) HVM1:Â [<ffffffff8124a644>] ? idr_mark_full+0x3e/0x47
(XEN) HVM1:Â [<ffffffff8124b192>] ? idr_alloc+0x9d/0xb3
(XEN) HVM1:Â [<ffffffff81124a10>] ? cache_alloc_refill+0x204/0x596
(XEN) HVM1:Â [<ffffffff813416d3>] ? drm_mode_object_get+0x51/0x63
(XEN) HVM1:Â [<ffffffff813413e6>] ? drm_modeset_unlock_all+0x24/0x45
(XEN) HVM1:Â [<ffffffff8138653e>] ? intel_dp_init+0x10e/0x13c
(XEN) HVM1:Â [<ffffffff8137c419>] ? intel_modeset_init+0x96c/0xc51
(XEN) HVM1:Â [<ffffffff81351583>] ? i915_driver_load+0xc1d/0xe53
(XEN) HVM1:Â [<ffffffff814d9908>] ? devfreq_unregister_opp_notifier+0x13/0x13
(XEN) HVM1:Â [<ffffffff8133ebd1>] ? drm_get_pci_dev+0x146/0x248
(XEN) HVM1:Â [<ffffffff8127242e>] ? pci_device_probe+0x58/0x8b
(XEN) HVM1:Â [<ffffffff813a959a>] ? driver_sysfs_add+0x69/0x90
(XEN) HVM1:Â [<ffffffff810adb85>] ? vprintk_emit+0x376/0x3a0
(XEN) HVM1:Â [<ffffffff813a9901>] ? driver_probe_device+0x117/0x2d6
(XEN) HVM1:Â [<ffffffff813a9b0f>] ? __driver_attach+0x4f/0x6f
(XEN) HVM1:Â [<ffffffff813a9ac0>] ? driver_probe_device+0x2d6/0x2d6
(XEN) HVM1:Â [<ffffffff813a8033>] ? bus_for_each_dev+0x52/0x7d
(XEN) HVM1:Â [<ffffffff813a8fad>] ? bus_add_driver+0xf4/0x22a
(XEN) HVM1:Â [<ffffffff813a9f5d>] ? driver_register+0x88/0xfd
(XEN) HVM1:Â [<ffffffff81a3b653>] ? ftrace_define_fields_drm_vblank_event+0x68/0x68
(XEN) HVM1:Â [<ffffffff810020b2>] ? do_one_initcall+0x98/0x122
(XEN) HVM1:Â [<ffffffff8108f1e4>] ? parse_args+0x22d/0x320
(XEN) HVM1:Â [<ffffffff819fde52>] ? kernel_init_freeable+0x101/0x192
(XEN) HVM1:Â [<ffffffff819fd6cc>] ? loglevel+0x34/0x34
(XEN) HVM1:Â [<ffffffff815d6e73>] ? rest_init+0x77/0x77
(XEN) HVM1:Â [<ffffffff815d6e79>] ? kernel_init+0x6/0xc9
(XEN) HVM1:Â [<ffffffff815e5f3c>] ? ret_from_fork+0x7c/0xb0
(XEN) HVM1:Â [<ffffffff815d6e73>] ? rest_init+0x77/0x77
(XEN) HVM1: ---[ end trace a419c9a84ad5158a ]---
(XEN) HVM1: Eddie: mappable_end 10000000
(XEN) HVM1: i915 ballooning.
(XEN) HVM1: Ballooning configuration:
(XEN) HVM1: Low GM: base 0x7800000 size 131072KB
(XEN) HVM1: High GM: base 0x28000000 size 393216KB
(XEN) HVM1: i915_balloon_space: start 0x10000000 end 0x28000000
(XEN) HVM1: free_space ffff88004e4460f0
(XEN) HVM1: free_space ffff88004e4460f0
(XEN) HVM1:Â bl_info.space[2] = ffff88004e7895c0
(XEN) HVM1: i915_balloon_space: start 0x3ffff000 end 0x80000000
(XEN) HVM1: free_space ffff88004e7895c0
(XEN) HVM1: free_space ffff88004e7895c0
(XEN) HVM1:Â bl_info.space[3] = ffff88004e789540
(XEN) HVM1: i915_balloon_space: start 0x0 end 0x7800000
(XEN) HVM1: free_space ffff88004e4460f0
(XEN) HVM1: free_space ffff88004e4460f0
(XEN) HVM1:Â bl_info.space[0] = ffff88004e7894c0
(XEN) HVM1: i915_balloon_space: start 0xf7ff000 end 0x10000000
(XEN) HVM1: free_space ffff88004e7894c0
(XEN) HVM1: free_space ffff88004e7894c0
(XEN) HVM1:Â bl_info.space[1] = ffff88004e789440
(XEN) HVM1: balloon successfully
[Â 165.859604] vGT: activate vgt (1) on ring (0)
[Â 165.864122] vGT-1: add to render run queue!
[Â 165.868775] vGT info:(vgt_handle_default_event_phys:1146) IRQ: receive event (Render MMIO sync flush status)
[Â 165.879179] vGT info:(vgt_handle_default_event_virt:947) IRQ: VM(0) receive event (Render MMIO sync flush status)
[Â 165.890017] vGT info:(vgt_handle_default_event_virt:947) IRQ: VM(1) receive event (Render MMIO sync flush status)
[Â 165.906076] vGT: activate vgt (1) on ring (1)
[Â 165.910944] vGT info:(vgt_handle_default_event_phys:1146) IRQ: receive event (Video MMIO sync flush status)
[Â 165.921344] vGT info:(vgt_handle_default_event_virt:947) IRQ: VM(0) receive event (Video MMIO sync flush status)
[Â 165.931815] vGT info:(vgt_handle_default_event_virt:947) IRQ: VM(1) receive event (Video MMIO sync flush status)
[Â 165.951618] vGT: activate vgt (1) on ring (2)
[Â 165.956297] vGT info:(vgt_handle_default_event_phys:1146) IRQ: receive event (Billter MMIO sync flush status)
[Â 165.966636] vGT info:(vgt_handle_default_event_virt:947) IRQ: VM(0) receive event (Billter MMIO sync flush status)
[Â 165.977319] vGT info:(vgt_handle_default_event_virt:947) IRQ: VM(1) receive event (Billter MMIO sync flush status)
[Â 165.990114] Ring-0 starts work for vgt-1
(XEN) HVM1: [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
(XEN) HVM1: fbcon: inteldrmfb (fb0) is primary device
(XEN) HVM1: [drm:vlv_update_pll] *ERROR* DPLL 0 failed to lock
(XEN) HVM1: ironlake_update_plane
[Â 166.474958] vGT info:(vgt_handle_default_event_virt:947) IRQ: VM(1) receive event (Primary Plane A flip done)
[Â 166.490467] vGT warning:(vgt_emulate_read:355) vGT: untracked MMIO read: vm_id(1), offset=0x61204,len=4, val=0x0!!! base_off=0x0
[Â 166.502661] vGT warning:(vgt_emulate_read:355) vGT: untracked MMIO read: vm_id(1), offset=0x61180,len=4, val=0x0!!! base_off=0x0
(XEN) HVM1: i915: intel_flush_display_plane
(XEN) HVM1: [drm:intel_pipe_config_compare] *ERROR* mismatch in gmch_pfit.control (expecte
(XEN) HVM1: d 0, found -2147483648)
(XEN) HVM1: ------------[ cut here ]------------
(XEN) HVM1: WARNING: CPU: 1 PID: 1 at /home/iurii/work/intel/android-x86/kernel/drivers/gp
(XEN) HVM1: u/drm/i915/intel_display.c:8335 check_crtc_state+0x646/0x6a8()
(XEN) HVM1: pipe state doesn't match!
(XEN) HVM1: Modules linked in:
(XEN) HVM1: CPU: 1 PID: 1 Comm: swapper/0 Tainted: GÂÂÂÂÂÂÂ WÂÂÂ 3.11.10-android-x86_64+ #
(XEN) HVM1: 2
(XEN) HVM1: Hardware name: Xen HVM domU, BIOS 4.3.1 01/02/2016
(XEN) HVM1:Â 0000000000000000 ffffffff81880717 ffffffff815df26e ffff8800500bd3d8
(XEN) HVM1:Â ffffffff81076650 ffff8800500bd3e8 ffffffff81371759 0000000000000001
(XEN) HVM1:Â ffff88004e754000 ffff88004e7b8800 0000000000000001 ffff88004e444000
(XEN) HVM1: Call Trace:
(XEN) HVM1:Â [<ffffffff815df26e>] ? dump_stack+0x50/0x80
(XEN) HVM1:Â [<ffffffff81076650>] ? warn_slowpath_common+0x79/0x92
(XEN) HVM1:Â [<ffffffff81371759>] ? check_crtc_state+0x646/0x6a8
(XEN) HVM1:Â [<ffffffff81076701>] ? warn_slowpath_fmt+0x45/0x4a
(XEN) HVM1:Â [<ffffffff8137d919>] ? intel_crt_get_flags+0x16/0x32
(XEN) HVM1:Â [<ffffffff81371759>] ? check_crtc_state+0x646/0x6a8
(XEN) HVM1:Â [<ffffffff8102880f>] ? sched_clock+0x5/0x8
(XEN) HVM1:Â [<ffffffff8137a834>] ? intel_modeset_check_state+0x3cc/0x5ec
(XEN) HVM1:Â [<ffffffff81252ab0>] ? snprintf+0x39/0x3e
(XEN) HVM1:Â [<ffffffff8137aaa9>] ? intel_set_mode+0x1d/0x27
(XEN) HVM1:Â [<ffffffff8137b0de>] ? intel_crtc_set_config+0x62b/0x7a6
(XEN) HVM1:Â [<ffffffff8117f477>] ? internal_create_group+0x97/0x1db
(XEN) HVM1:Â [<ffffffff8124ada1>] ? idr_get_empty_slot+0x204/0x31c
(XEN) HVM1:Â [<ffffffff81342a58>] ? drm_mode_set_config_internal+0x44/0xae
(XEN) HVM1:Â [<ffffffff81332abc>] ? drm_fb_helper_set_par+0x55/0x9a
(XEN) HVM1:Â [<ffffffff8128be88>] ? fbcon_init+0x2f3/0x3fa
(XEN) HVM1:Â [<ffffffff8131ae0b>] ? visual_init+0xaf/0x102
(XEN) HVM1:Â [<ffffffff8131c671>] ? do_bind_con_driver+0x1ce/0x2cf
(XEN) HVM1:Â [<ffffffff8131c8b4>] ? do_take_over_console+0x142/0x153
(XEN) HVM1:Â [<ffffffff8128b6ad>] ? do_fbcon_takeover+0x54/0x8f
(XEN) HVM1:Â [<ffffffff810949d9>] ? notifier_call_chain+0x2e/0x5b
(XEN) HVM1:Â [<ffffffff81094b06>] ? __blocking_notifier_call_chain+0x48/0x5e
(XEN) HVM1:Â [<ffffffff81283dc8>] ? register_framebuffer+0x25a/0x27e
(XEN) HVM1:Â [<ffffffff813329a9>] ? drm_fb_helper_initial_config+0x3a4/0x462
(XEN) HVM1:Â [<ffffffff8134db5a>] ? i915_read32+0x112/0x182
(XEN) HVM1:Â [<ffffffff81351609>] ? i915_driver_load+0xca3/0xe53
(XEN) HVM1:Â [<ffffffff814d9908>] ? devfreq_unregister_opp_notifier+0x13/0x13
(XEN) HVM1:Â [<ffffffff8133ebd1>] ? drm_get_pci_dev+0x146/0x248
(XEN) HVM1:Â [<ffffffff8127242e>] ? pci_device_probe+0x58/0x8b
(XEN) HVM1:Â [<ffffffff813a959a>] ? driver_sysfs_add+0x69/0x90
(XEN) HVM1:Â [<ffffffff810adb85>] ? vprintk_emit+0x376/0x3a0
(XEN) HVM1:Â [<ffffffff813a9901>] ? driver_probe_device+0x117/0x2d6
(XEN) HVM1:Â [<ffffffff813a9b0f>] ? __driver_attach+0x4f/0x6f
(XEN) HVM1:Â [<ffffffff813a9ac0>] ? driver_probe_device+0x2d6/0x2d6
(XEN) HVM1:Â [<ffffffff813a8033>] ? bus_for_each_dev+0x52/0x7d
(XEN) HVM1:Â [<ffffffff813a8fad>] ? bus_add_driver+0xf4/0x22a
(XEN) HVM1:Â [<ffffffff813a9f5d>] ? driver_register+0x88/0xfd
(XEN) HVM1:Â [<ffffffff81a3b653>] ? ftrace_define_fields_drm_vblank_event+0x68/0x68
(XEN) HVM1:Â [<ffffffff810020b2>] ? do_one_initcall+0x98/0x122
(XEN) HVM1:Â [<ffffffff8108f1e4>] ? parse_args+0x22d/0x320
(XEN) HVM1:Â [<ffffffff819fde52>] ? kernel_init_freeable+0x101/0x192
(XEN) HVM1:Â [<ffffffff819fd6cc>] ? loglevel+0x34/0x34
(XEN) HVM1:Â [<ffffffff815d6e73>] ? rest_init+0x77/0x77
(XEN) HVM1:Â [<ffffffff815d6e79>] ? kernel_init+0x6/0xc9
(XEN) HVM1:Â [<ffffffff815e5f3c>] ? ret_from_fork+0x7c/0xb0
(XEN) HVM1:Â [<ffffffff815d6e73>] ? rest_init+0x77/0x77
(XEN) HVM1: ---[ end trace a419c9a84ad5158b ]---
[Â 166.948453] vGT info:(vgt_handle_default_event_virt:947) IRQ: VM(0) receive event (Primary Plane A flip done)
(XEN) HVM1: Console: switching to colour frame buffer device 240x67
(XEN) HVM1: i915 0000:00:02.0: fb0: inteldrmfb frame buffer deviceSUBSYSTEM=pciDEVICE=+pci
(XEN) HVM1: :0000:00:02.0
(XEN) HVM1: i915 0000:00:02.0: registered panic notifierSUBSYSTEM=pciDEVICE=+pci:0000:00:0
(XEN) HVM1: 2.0
(XEN) HVM1: i915: No ACPI video bus found
(XEN) HVM1: [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
(XEN) HVM1: brd: module loaded
(XEN) HVM1: loop: module loaded
(XEN) HVM1: hv_vmbus: registering driver hv_storvsc
(XEN) HVM1: ata_piix 0000:00:01.1: version 2.13SUBSYSTEM=pciDEVICE=+pci:0000:00:01.1
(XEN) HVM1: blkfront: xvda: barrier: enabled; persistent grants: disabled; indirect descri
(XEN) HVM1: ptors: disabled;
(XEN) HVM1: ata_piix 0000:00:01.1: setting latency timer to 64SUBSYSTEM=pciDEVICE=+pci:000
(XEN) HVM1: 0:00:01.1
(XEN) HVM1:Â xvda: xvda1
(XEN) HVM1: Setting capacity to 20480000
(XEN) HVM1: xvda: detected capacity change from 0 to 10485760000
(XEN) HVM1: scsi0 : ata_piix
(XEN) HVM1: scsi1 : ata_piix
(XEN) HVM1: ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc220 irq 14
(XEN) HVM1: ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc228 irq 15
(XEN) HVM1: tun: Universal TUN/TAP device driver, 1.6
(XEN) HVM1: tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
(XEN) HVM1: PPP generic driver version 2.4.2
(XEN) HVM1: PPP BSD Compression module registered
(XEN) HVM1: PPP Deflate Compression module registered
(XEN) HVM1: PPP MPPE Compression module registered
(XEN) HVM1: xen_netfront: Initialising Xen virtual ethernet driver
(XEN) HVM1: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
(XEN) HVM1: ehci-pci: EHCI PCI platform driver
(XEN) HVM1: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
(XEN) HVM1: ohci-pci: OHCI PCI platform driver
(XEN) HVM1: uhci_hcd: USB Universal Host Controller Interface driver
(XEN) HVM1: uhci_hcd 0000:00:01.2: setting latency timer to 64SUBSYSTEM=pciDEVICE=+pci:000
[Â 167.723839] x(XEN) HVM1: 0:00:01.2
enbr0: port 2(vif1.0) entered fo(XEN) HVM1: uhci_hcd 0000:00:01.2: UHCI Host ControllerSUBSYSTEM=pciDEVICE=+pci:0000:00:01
rwarding state
(XEN) HVM1: .2
[Â 167.739644] xenbr0: port 2(vif1.0) entered forwarding state
(XEN) HVM1: uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1SUBSYSTEM=
(XEN) HVM1: pciDEVICE=+pci:0000:00:01.2
(XEN) HVM1: uhci_hcd 0000:00:01.2: irq 23, io base 0x0000c200SUBSYSTEM=pciDEVICE=+pci:0000
(XEN) HVM1: :00:01.2
(XEN) HVM1: usb usb1: New USB device found, idVendor=1d6b, idProduct=0001SUBSYSTEM=usbDEVI
(XEN) HVM1: CE=c189:0
(XEN) HVM1: usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1SUBSYSTEM=us
(XEN) HVM1: bDEVICE=c189:0
(XEN) HVM1: usb usb1: Product: UHCI Host ControllerSUBSYSTEM=usbDEVICE=c189:0
(XEN) HVM1: usb usb1: Manufacturer: Linux 3.11.10-android-x86_64+ uhci_hcdSUBSYSTEM=usbDEV
(XEN) HVM1: ICE=c189:0
(XEN) HVM1: usb usb1: SerialNumber: 0000:00:01.2SUBSYSTEM=usbDEVICE=c189:0
(XEN) HVM1: hub 1-0:1.0: USB hub foundSUBSYSTEM=usbDEVICE=+usb:1-0:1.0
(XEN) HVM1: hub 1-0:1.0: 2 ports detectedSUBSYSTEM=usbDEVICE=+usb:1-0:1.0
(XEN) HVM1: [drm:valleyview_enable_rps] *ERROR* GT fifo had a previous error 10
(XEN) HVM1: fusbh200_hcd: FUSBH200 Host Controller (EHCI) Driver
(XEN) HVM1: Warning! fusbh200_hcd should always be loaded before uhci_hcd and ohci_hcd, no
(XEN) HVM1: t after
(XEN) HVM1: usbcore: registered new interface driver usb-storage
(XEN) HVM1: usbcore: registered new interface driver ums-alauda
(XEN) HVM1: ata2.01: NODEV after polling detection
(XEN) HVM1: usbcore: registered new interface driver ums-cypress
(XEN) HVM1: usbcore: registered new interface driver ums-datafab
(XEN) HVM1: ata2.00: ATAPI: QEMU DVD-ROM, 1.3.0, max UDMA/100
(XEN) HVM1: usbcore: registered new interface driver ums_eneub6250
(XEN) HVM1: usbcore: registered new interface driver ums-freecom
(XEN) HVM1: ata2.00: configured for MWDMA2
(XEN) HVM1: usbcore: registered new interface driver ums-isd200
(XEN) HVM1: usbcore: registered new interface driver ums-jumpshot
(XEN) HVM1: usbcore: registered new interface driver ums-onetouch
(XEN) HVM1: scsi 1:0:0:0: CD-ROMÂÂÂÂÂÂÂÂÂÂÂ QEMUÂÂÂÂ QEMU DVD-ROMÂÂÂÂ 1.3. PQ: 0 ANSI: 5SU
(XEN) HVM1: BSYSTEM=scsiDEVICE=+scsi:1:0:0:0
(XEN) HVM1: usbcore: registered new interface driver ums-realtek
(XEN) HVM1: usbcore: registered new interface driver ums-sddr09
(XEN) HVM1: usbcore: registered new interface driver ums-sddr55
(XEN) HVM1: usbcore: registered new interface driver ums-usbat
(XEN) HVM1: i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
(XEN) HVM1: sr0: scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
(XEN) HVM1: cdrom: Uniform CD-ROM driver Revision: 3.20
(XEN) HVM1: sr 1:0:0:0: Attached scsi CD-ROM sr0SUBSYSTEM=scsiDEVICE=+scsi:1:0:0:0
(XEN) HVM1: serio: i8042 KBD port at 0x60,0x64 irq 1
(XEN) HVM1: serio: i8042 AUX port at 0x60,0x64 irq 12
(XEN) HVM1: sr 1:0:0:0: Attached scsi generic sg0 type 5SUBSYSTEM=scsiDEVICE=+scsi:1:0:0:0
(XEN) HVM1:
(XEN) HVM1: mousedev: PS/2 mouse device common for all mice
(XEN) HVM1: input: Xen Virtual Keyboard as /devices/virtual/input/input2
(XEN) HVM1: input: Xen Virtual Pointer as /devices/virtual/input/input3
(XEN) HVM1: rtc (null): alarm rollover: daySUBSYSTEM=rtcDEVICE=+rtc:(null)
(XEN) HVM1: rtc rtc0: rtc_cmos: dev (254:0)SUBSYSTEM=rtcDEVICE=c254:0
(XEN) HVM1: rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0SUBSYSTEM=pnpDEVICE=+pnp:
(XEN) HVM1: 00:04
(XEN) HVM1: rtc_cmos 00:04: alarms up to one day, 114 bytes nvram, hpet irqsSUBSYSTEM=pnpD
(XEN) HVM1: EVICE=+pnp:00:04
(XEN) HVM1: IR RC5 (streamzap) protocol handler initialized
(XEN) HVM1: device-mapper: uevent: version 1.0.3
(XEN) HVM1: device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@xxxxxxxx
(XEN) HVM1: om
(XEN) HVM1: cpuidle: using governor ladder
(XEN) HVM1: cpuidle: using governor menu
(XEN) HVM1: sdhci: Secure Digital Host Controller Interface driver
(XEN) HVM1: sdhci: Copyright(c) Pierre Ossman
(XEN) HVM1: sdhci-pltfm: SDHCI platform and OF driver helper
(XEN) HVM1: ioremap error for 0xfc001000-0xfc002000, requested 0x10, got 0x0
(XEN) HVM1: hidraw: raw HID events driver (C) Jiri Kosina
(XEN) HVM1: usbcore: registered new interface driver usbhid
(XEN) HVM1: usbhid: USB HID core driver
(XEN) HVM1: ashmem: initialized
(XEN) HVM1: GACT probability NOT on
(XEN) HVM1: Mirror/redirect action on
(XEN) HVM1: u32 classifier
(XEN) HVM1:ÂÂÂÂ Actions configured
(XEN) HVM1: Netfilter messages via NETLINK v0.30.
(XEN) HVM1: nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
(XEN) HVM1: ctnetlink v0.93: registering with nfnetlink.
(XEN) HVM1: xt_time: kernel timezone is -0000
(XEN) HVM1: ip_tables: (C) 2000-2006 Netfilter Core Team
(XEN) HVM1: arp_tables: (C) 2002 David S. Miller
(XEN) HVM1: TCP: cubic registered
(XEN) HVM1: Initializing XFRM netlink socket
(XEN) HVM1: NET: Registered protocol family 10
(XEN) HVM1: mip6: Mobile IPv6
(XEN) HVM1: ip6_tables: (C) 2000-2006 Netfilter Core Team
(XEN) HVM1: sit: IPv6 over IPv4 tunneling driver
(XEN) HVM1: NET: Registered protocol family 17
(XEN) HVM1: NET: Registered protocol family 15
(XEN) HVM1: NET: Registered protocol family 35
(XEN) HVM1: registered taskstats version 1
(XEN) HVM1:ÂÂ Magic number: 0:774:691
(XEN) HVM1: rtc_cmos 00:04: setting system clock to 2016-01-13 16:41:34 UTC (1452703294)SU
(XEN) HVM1: BSYSTEM=pnpDEVICE=+pnp:00:04
(XEN) HVM1: Freeing unused kernel memory: 968K (ffffffff819e8000 - ffffffff81ada000)
(XEN) HVM1: VFS: could not find a valid V7 on xvda.
(XEN) HVM1: EXT3-fs (xvda1): error: couldn't mount because of unsupported optional feature
(XEN) HVM1: s (40)
(XEN) HVM1: EXT2-fs (xvda1): error: couldn't mount because of unsupported optional feature
(XEN) HVM1: s (44)
(XEN) HVM1: EXT4-fs (xvda1): INFO: recovery required on readonly filesystem
(XEN) HVM1: EXT4-fs (xvda1): write access will be enabled during recovery
(XEN) HVM1: EXT4-fs (xvda1): orphan cleanup on readonly fs
(XEN) HVM1: EXT4-fs (xvda1): 4 orphan inodes deleted
(XEN) HVM1: EXT4-fs (xvda1): recovery complete
(XEN) HVM1: EXT4-fs (xvda1): mounted filesystem with ordered data mode. Opts: (null)
(XEN) HVM1: EXT4-fs (xvda1): re-mounted. Opts: (null)
(XEN) HVM1: parport_pc 00:0a: reported by Plug and Play ACPISUBSYSTEM=pnpDEVICE=+pnp:00:0a
(XEN) HVM1:
(XEN) HVM1: parport0: PC-style at 0x378, irq 7 [PCSPP(,...)]
(XEN) HVM1: piix4_smbus 0000:00:01.3: Host SMBus controller not enabled!SUBSYSTEM=pciDEVIC
(XEN) HVM1: E=+pci:0000:00:01.3
(XEN) HVM1: input: PC Speaker as /devices/platform/pcspkr/input/input4
(XEN) HVM1: input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/in
(XEN) HVM1: put5
(XEN) HVM1: EXT4-fs (xvda1): re-mounted. Opts: (null)
(XEN) HVM1: init: /dev/hw_random not found
(XEN) HVM1: init: Couldn't probe module 'acpi-cpufreq'
(XEN) HVM1: Bluetooth: Core ver 2.16
(XEN) HVM1: NET: Registered protocol family 31
(XEN) HVM1: Bluetooth: HCI device and connection manager initialized
(XEN) HVM1: Bluetooth: HCI socket layer initialized
(XEN) HVM1: Bluetooth: L2CAP socket layer initialized
(XEN) HVM1: Bluetooth: SCO socket layer initialized
(XEN) HVM1: usbcore: registered new interface driver btusb
(XEN) HVM1: init: Couldn't probe module 'vivi'
(XEN) HVM1: init: /dev/hw_random not found
(XEN) HVM1: fs_mgr: __mount(source=none,target=/cache,type=tmpfs)=0
(XEN) HVM1: init: Unable to read property file '/system/default.prop'
(XEN) HVM1: init: Unable to read property file '/vendor/build.prop'
(XEN) HVM1: init: Unable to read property file '/factory/factory.prop'
(XEN) HVM1: init: Unable to read property file '/data/local.prop'
(XEN) HVM1: binder: 1179:1179 transaction failed 29189, size 0-0
(XEN) HVM1: init: cannot find '/system/bin/install-recovery.sh', disabling 'flash_recovery
(XEN) HVM1: '
(XEN) HVM1: init: /sbin/modprobe net-pf-16-proto-9
(XEN) HVM1: init: Couldn't probe module 'net-pf-16-proto-9'
(XEN) HVM1: input: Android Power Button as /devices/virtual/input/input6
(XEN) HVM1: logd.auditd: start
(XEN) HVM1: input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input
(XEN) HVM1: /input7
(XEN) HVM1: healthd: No charger supplies found
(XEN) HVM1: healthd: No battery devices found
[Â 172.780421] vGT warning:(pch_adpa_mmio_write:1174) HOTPLUG_FORCE_TRIGGER is set while VGA is enabled!
[Â 172.911094] vGT warning:(pch_adpa_mmio_write:1174) HOTPLUG_FORCE_TRIGGER is set while VGA is enabled!
[Â 172.949163] vGT warning:(pch_adpa_mmio_write:1174) HOTPLUG_FORCE_TRIGGER is set while VGA is enabled!
(XEN) HVM1: ironlake_update_plane
(XEN) HVM1: x_tables: ip_tables: owner match: used from hooks INPUT, but only valid from O
(XEN) HVM1: UTPUT/POSTROUTING
[Â 174.454858] Ring-2 starts work for vgt-1
(XEN) HVM1: x_tables: ip6_tables: owner match: used from hooks INPUT, but only valid from
(XEN) HVM1: OUTPUT/POSTROUTING
(XEN) HVM1: init: /sbin/modprobe net-pf-16-proto-5
(XEN) HVM1: init: Couldn't probe module 'net-pf-16-proto-5'
(XEN) HVM1: warning: `main' uses 32-bit capabilities (legacy support in use)
[Â 182.756932] xenbr0: port 2(vif1.0) entered forwarding state
(XEN) HVM1: healthd: battery none chg=

ÂCTRL-A Z for help |115200 8N1 | NOR | Minicom 2.5ÂÂÂ | VT102 |ÂÂÂÂÂ OfflineÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ
Â

On Wed, Jan 13, 2016 at 6:45 PM, Oleksii Kurochko <oleksii.kurochko@xxxxxxxxxxxxxxx> wrote:
Hello.

I tried to fix next error message:



--
Oleksii Kurochko | Embedded Dev
GlobalLogic
www.globallogic.com
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.