[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] [RFC/WIP] xen: clk: introudce pvclk for device passthrough



Hello David,

On Mon, Jan 18, 2016 at 11:24:08AM +0000, David Vrabel wrote:
>On 16/01/16 05:22, Peng Fan wrote:
>> This patch was just a initial patch, not sure whether this way
>> is ok from you side for handlding clk when doing platform device
>> passhthrough. Any comments are appreciated, and your comments may
>> give me a better direction.
>
>There's no documentation on the interface, which makes it difficult to
>review.  At a first look it looks very specific to the particular Linux
>implementation of a clk subsystem.

My bad. I'll add more text in commit log or cover letter in V2 to describe
the interface.

>
>> --- /dev/null
>> +++ b/include/xen/interface/io/clkif.h
>> @@ -0,0 +1,41 @@
>> +/*
>> + * The code contained herein is licensed under the GNU General Public
>> + * License. You may obtain a copy of the GNU General Public License
>> + * Version 2 or later at the following locations:
>> + *
>> + * http://www.opensource.org/licenses/gpl-license.html
>> + * http://www.gnu.org/copyleft/gpl.html
>> + */
>
>ABIs should be under a more permissive license so they can be used by
>other (non-GPLv2) operating systems.

ok. I'll change this.

>
>> +
>> +#ifndef __XEN_PUBLIC_IO_CLKIF_H__
>> +#define __XEN_PUBLIC_IO_CLKIF_H__
>> +
>> +#include <xen/interface/io/ring.h>
>> +#include <xen/interface/grant_table.h>
>> +
>> +/**/
>> +enum {
>> +    XENCLK_PREPARE,         /* clk_prepare_enable */
>> +    XENCLK_UNPREPARE,       /* clk_unprepare_disable */
>> +    XENCLK_GET_RATE,        /* clk_get_rate */
>> +    XENCLK_SET_RATE,        /* clk_set_rate */
>> +    XENCLK_END,
>> +};
>> +
>> +struct xen_clkif_request {
>> +    int id;
>
>You should use fixed width types so the ABI is the same on 32-bit and
>64-bit guests.

Will fix in V2.

>
>> +    unsigned long rate;
>> +    char clk_name[32];
>
>Where does the frontend get these names from?  31 character names seems
>rather limiting.

The clk_name is got from DomU device tree. In the commit log, I wrote this:
"
                clks: clks {
                        compatible = "xen,xen-clk";
                        #clock-cells = <1>;
                        clock-output-names = "uart2_root_clk";
                };
"
The clk_name is one of the entry from clock-output-names, clk_name will
be passed to Dom0, Dom0 will use the clk_name to find the clk structure using
__clk_lookup.


>
>> +};
>> +
>> +struct xen_clkif_response {
>> +    int id;
>> +    int success;
>> +    unsigned long rate;
>> +    char clk_name[32];
>> +};
>
>I don't think you need to the name in the response.  The id will tie the
>response to the request.

My original idea is to  use id and clk_name to check whether the response is 
for the requester.
You can see in the patch:
" if ((id == comp->id) && !strncmp(name, comp->clk_name, 
sizeof(comp->clk_name)))"

Maybe clk_name is redundant here. I will remove it in V2.

Thanks for your comments.

Peng.

>
>> +
>> +DEFINE_RING_TYPES(xen_clkif, struct xen_clkif_request, struct 
>> xen_clkif_response);
>> +#define XEN_CLK_RING_SIZE __CONST_RING_SIZE(xen_clkif, PAGE_SIZE)
>> +
>> +#endif
>> 
>

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.