[Xen-devel] [PATCH v3] xsm: add a default policy to .init.data

[Daniel De Graaf <dgdegra@xxxxxxxxxxxxx>]

This adds a Kconfig option and support for including the XSM policy from
tools/flask/policy in the hypervisor so that the bootloader does not
need to provide a policy to get sane behavior from an XSM-enabled
hypervisor.  The policy provided by the bootloader, if present, will
override the built-in policy.

The XSM policy is not moved out of tools because that remains the
primary location for installing and configuring the policy.

Signed-off-by: Daniel De Graaf <dgdegra@xxxxxxxxxxxxx>
---

Changes from v2 (dropped acks and reviewed-by):
 - Drop linker script changes, use python binary-to-C file script
 - Make the config option always include the policy if selected
 - Note the new conditional dependency on checkpolicy in INSTALL


 INSTALL                             |  6 +++++-
 docs/misc/xen-command-line.markdown | 16 +++++++++-------
 docs/misc/xsm-flask.txt             | 30 +++++++++++++++---------------
 xen/common/Kconfig                  | 16 ++++++++++++++++
 xen/xsm/flask/.gitignore            |  1 +
 xen/xsm/flask/Makefile              | 11 +++++++++++
 xen/xsm/flask/gen-policy.py         | 19 +++++++++++++++++++
 xen/xsm/xsm_core.c                  | 22 +++++++++++++++++++++-
 8 files changed, 97 insertions(+), 24 deletions(-)
 create mode 100644 xen/xsm/flask/.gitignore
 create mode 100644 xen/xsm/flask/gen-policy.py

diff --git a/INSTALL b/INSTALL
index 616a67a..703cfe7 100644
--- a/INSTALL
+++ b/INSTALL
@@ -272,7 +272,11 @@ PYTHON_PREFIX_ARG=
 The hypervisor may be build with XSM/Flask support, which can be changed
 by running:
 make -C xen menuconfig
-and enabling XSM/Flask in the 'Common Features' menu.
+and enabling XSM/Flask in the 'Common Features' menu.  By default, this
+selection will also enable compiling a built-in policy, which requires
+the SELinux policy compiler (checkpolicy) to build.  The location of
+this executable can be set using its environment variable.
+CHECKPOLICY=
 
 Do a build for coverage.
 coverage=y
diff --git a/docs/misc/xen-command-line.markdown 
b/docs/misc/xen-command-line.markdown
index 2a088ca..5500242 100644
--- a/docs/misc/xen-command-line.markdown
+++ b/docs/misc/xen-command-line.markdown
@@ -712,13 +712,15 @@ enabled by running either:
   with untrusted guests.  If a policy is provided by the bootloader, it will be
   loaded; errors will be reported to the ring buffer but will not prevent
   booting.  The policy can be changed to enforcing mode using "xl setenforce".
-* `enforcing`: This requires a security policy to be provided by the bootloader
-  and will enter enforcing mode prior to the creation of domain 0.  If a valid
-  policy is not provided, the hypervisor will not continue booting.
-* `late`: This disables loading of the security policy from the bootloader.
-  FLASK will be enabled but will not enforce access controls until a policy is
-  loaded by a domain using "xl loadpolicy".  Once a policy is loaded, FLASK 
will
-  run in enforcing mode unless "xl setenforce" has changed that setting.
+* `enforcing`: This will cause the security server to enter enforcing mode 
prior
+  to the creation of domain 0.  If an valid policy is not provided by the
+  bootloader and no built-in policy is present, the hypervisor will not 
continue
+  booting.
+* `late`: This disables loading of the built-in security policy or the policy
+  provided by the bootloader.  FLASK will be enabled but will not enforce 
access
+  controls until a policy is loaded by a domain using "xl loadpolicy".  Once a
+  policy is loaded, FLASK will run in enforcing mode unless "xl setenforce" has
+  changed that setting.
 * `disabled`: This causes the XSM framework to revert to the dummy module.  The
   dummy module provides the same security policy as is used when compiling the
   hypervisor without support for XSM.  The xsm\_op hypercall can also be used 
to
diff --git a/docs/misc/xsm-flask.txt b/docs/misc/xsm-flask.txt
index 2f42585..62f15dd 100644
--- a/docs/misc/xsm-flask.txt
+++ b/docs/misc/xsm-flask.txt
@@ -141,21 +141,21 @@ only type enforcement is used and the user and role are 
set to system_u and
 system_r for all domains.
 
 The FLASK security framework is mostly configured using a security policy file.
-This policy file is not normally generated during the Xen build process because
-it relies on the SELinux compiler "checkpolicy"; run
-
-       make -C tools/flask/policy
-
-to compile the example policy included with Xen. The policy is generated from
-definition files under this directory. Most changes to security policy will
-involve creating or modifying modules found in tools/flask/policy/modules/.  
The
-modules.conf file there defines what modules are enabled and has short
-descriptions of each module.
-
-The XSM policy file needs to be copied to /boot and loaded as a module by grub.
-The exact position of the module does not matter as long as it is after the Xen
-kernel; it is normally placed either just above the dom0 kernel or at the end.
-Once dom0 is running, the policy can be reloaded using "xl loadpolicy".
+It relies on the SELinux compiler "checkpolicy"; if this is available, the
+policy will be compiled as part of the tools build.  If hypervisor support for 
a
+built-in policy is enabled ("Compile Xen with a built-in security policy"), the
+policy will be built during the hypervisor build.
+
+The policy is generated from definition files in tools/flask/policy.  Most
+changes to security policy will involve creating or modifying modules found in
+tools/flask/policy/modules/.  The modules.conf file there defines what modules
+are enabled and has short descriptions of each module.
+
+If not using the built-in policy, the XSM policy file needs to be copied to
+/boot and loaded as a module by grub.  The exact position and filename of the
+module does not matter as long as it is after the Xen kernel; it is normally
+placed either just above the dom0 kernel or at the end.  Once dom0 is running,
+the policy can be reloaded using "xl loadpolicy".
 
 The example policy included with Xen demonstrates most of the features of FLASK
 that can be used without dom0 disaggregation. The main types for domUs are:
diff --git a/xen/common/Kconfig b/xen/common/Kconfig
index daab832..f15ea78 100644
--- a/xen/common/Kconfig
+++ b/xen/common/Kconfig
@@ -143,6 +143,22 @@ config FLASK_AVC_STATS
 
          If unsure, say Y.
 
+config XSM_POLICY
+       bool "Compile Xen with a built-in security policy"
+       default y
+       depends on XSM
+       ---help---
+         This includes a default XSM policy in the hypervisor so that the
+         bootloader does not need to load a policy to get sane behavior from an
+         XSM-enabled hypervisor.  If this is disabled, a policy must be
+         provided by the bootloader or by Domain 0.  Even if this is enabled, a
+         policy provided by the bootloader will override it.
+
+         This requires that the SELinux policy compiler (checkpolicy) be
+         available when compiling the hypervisor.
+
+         If unsure, say Y.
+
 # Enable schedulers
 menu "Schedulers"
        visible if EXPERT = "y"
diff --git a/xen/xsm/flask/.gitignore b/xen/xsm/flask/.gitignore
new file mode 100644
index 0000000..024edbe
--- /dev/null
+++ b/xen/xsm/flask/.gitignore
@@ -0,0 +1 @@
+/policy.c
diff --git a/xen/xsm/flask/Makefile b/xen/xsm/flask/Makefile
index 12fc3a9..6335a72 100644
--- a/xen/xsm/flask/Makefile
+++ b/xen/xsm/flask/Makefile
@@ -27,6 +27,17 @@ $(FLASK_H_FILES): $(FLASK_H_DEPEND)
 $(AV_H_FILES): $(AV_H_DEPEND)
        $(CONFIG_SHELL) policy/mkaccess_vector.sh $(AWK) $(AV_H_DEPEND)
 
+obj-$(CONFIG_XSM_POLICY) += policy.o
+
+POLICY_SRC := $(XEN_ROOT)/tools/flask/policy/xenpolicy-$(XEN_FULLVERSION)
+
+policy.bin: FORCE
+       $(MAKE) -C $(XEN_ROOT)/tools/flask/policy
+       cmp -s $(POLICY_SRC) $@ || cp $(POLICY_SRC) $@
+
+policy.c: policy.bin gen-policy.py
+       $(PYTHON) gen-policy.py < $< > $@
+
 .PHONY: clean
 clean::
        rm -f $(ALL_H_FILES) *.o $(DEPS)
diff --git a/xen/xsm/flask/gen-policy.py b/xen/xsm/flask/gen-policy.py
new file mode 100644
index 0000000..9602b0b
--- /dev/null
+++ b/xen/xsm/flask/gen-policy.py
@@ -0,0 +1,19 @@
+#!/usr/bin/env python
+import sys
+
+policy_size = 0
+
+sys.stdout.write("""
+/* This file is autogenerated by gen_policy.py */
+#include <xen/init.h>
+
+const unsigned char xsm_init_policy[] __init = {
+""")
+
+for char in sys.stdin.read():
+    sys.stdout.write(" 0x%02x," % ord(char))
+    policy_size = policy_size + 1
+    if policy_size % 13 == 0:
+        sys.stdout.write("\n")
+
+sys.stdout.write("\n};\nconst int __init xsm_init_policy_size = %d;\n" % 
policy_size)
diff --git a/xen/xsm/xsm_core.c b/xen/xsm/xsm_core.c
index 8df1a3c..93c7d43 100644
--- a/xen/xsm/xsm_core.c
+++ b/xen/xsm/xsm_core.c
@@ -36,6 +36,24 @@ static inline int verify(struct xsm_operations *ops)
     return 0;
 }
 
+#ifdef CONFIG_XSM_POLICY
+extern char xsm_init_policy[];
+extern int xsm_init_policy_size;
+#else
+#define xsm_init_policy 0
+#endif
+
+static void __init xsm_policy_init(void)
+{
+#ifdef CONFIG_XSM_POLICY
+    if ( policy_size == 0 )
+    {
+        policy_buffer = xsm_init_policy;
+        policy_size = xsm_init_policy_size;
+    }
+#endif
+}
+
 static int __init xsm_core_init(void)
 {
     if ( verify(&dummy_xsm_ops) )
@@ -46,6 +64,7 @@ static int __init xsm_core_init(void)
     }
 
     xsm_ops = &dummy_xsm_ops;
+    xsm_policy_init();
     flask_init();
 
     return 0;
@@ -98,7 +117,8 @@ int __init xsm_dt_init(void)
 
     ret = xsm_core_init();
 
-    xfree(policy_buffer);
+    if ( policy_buffer != xsm_init_policy )
+        xfree(policy_buffer);
 
     return ret;
 }
-- 
2.7.4


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel