[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] [PATCH v2 1/2] xen_platform: unplug also SCSI disks



On Fri, 2 Sep 2016, Olaf Hering wrote:
> Using 'vdev=sd[a-o]' will create an emulated LSI controller, which can
> be used by the emulated BIOS to boot from disk. If the HVM domU has also
> PV driver the disk may appear twice in the guest. To avoid this an
> unplug of the emulated hardware is needed, similar to what is done for
> IDE and NIC drivers already.
> 
> Since the SCSI controller provides only disks the entire controller can
> be unplugged at once.
> 
> Impact of the change for classic and pvops based guest kernels:
> 
>  vdev=sda:disk0
> before: pvops:   disk0=pv xvda + emulated sda
>         classic: disk0=pv sda  + emulated sdq
> after:  pvops:   disk0=pv xvda
>         classic: disk0=pv sda
> 
>  vdev=hda:disk0, vdev=sda:disk1
> before: pvops:   disk0=pv xvda
>                  disk1=emulated sda
>         classic: disk0=pv hda
>                  disk1=pv sda  + emulated sdq
> after:  pvops:   disk0=pv xvda
>                  disk1=not accessible by blkfront, index hda==index sda
>         classic: disk0=pv hda
>                  disk1=pv sda
> 
>  vdev=hda:disk0, vdev=sda:disk1, vdev=sdb:disk2
> before: pvops:   disk0=pv xvda
>                  disk1=emulated sda
>                  disk2=pv xvdb + emulated sdb
>         classic: disk0=pv hda
>                  disk1=pv sda  + emulated sdq
>                  disk2=pv sdb  + emulated sdr
> after:  pvops:   disk0=pv xvda
>                  disk1=not accessible by blkfront, index hda==index sda
>                  disk2=pv xvdb
>         classic: disk0=pv hda
>                  disk1=pv sda
>                  disk2=pv sda
> 
> Signed-off-by: Olaf Hering <olaf@xxxxxxxxx>
> ---
>  hw/i386/xen/xen_platform.c | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/hw/i386/xen/xen_platform.c b/hw/i386/xen/xen_platform.c
> index aa78393..53be3c7 100644
> --- a/hw/i386/xen/xen_platform.c
> +++ b/hw/i386/xen/xen_platform.c
> @@ -114,6 +114,10 @@ static void unplug_disks(PCIBus *b, PCIDevice *d, void 
> *o)
>              PCI_CLASS_STORAGE_IDE
>              && strcmp(d->name, "xen-pci-passthrough") != 0) {
>          pci_piix3_xen_ide_unplug(DEVICE(d));
> +    } else if (pci_get_word(d->config + PCI_CLASS_DEVICE) ==
> +            PCI_CLASS_STORAGE_SCSI
> +            && strcmp(d->name, "xen-pci-passthrough") != 0) {
> +        object_unparent(OBJECT(d));
>      }
>  }

Written like this, the code will unplug any Xen SCSI disks together with
Xen IDE disks when the guest writes "1" to ioport `0x10`. I am sorry to
be pedantic, but the recent changes introduced to
docs/misc/hvm-emulated-unplug.markdown do not cover any changes in
behavior to the existing ioport address (I am looking specifically at
point 6).  Sorry to only notice this now.

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
https://lists.xen.org/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.