|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] GPU passthrough on ARM
On 01/29/2018 08:31 AM, Oleksandr Tyshchenko wrote: Hi On Sat, Jan 27, 2018 at 2:41 AM, Martin Kelly <mkelly@xxxxxxxx> wrote:On 01/26/2018 10:13 AM, Oleksandr Tyshchenko wrote:Hi, Martin On Fri, Jan 26, 2018 at 8:05 PM, Oleksandr Tyshchenko <olekstysh@xxxxxxxxx> wrote:On Fri, Jan 26, 2018 at 3:49 PM, Julien Grall <julien.grall@xxxxxxxxxx> wrote:Hi, I am CCing Oleksandr. He knows better than me this platform.Hi, Julien. OK, thank you, I will try to provide some pointers.Cheers, On 26/01/18 00:29, Martin Kelly wrote:On 01/25/2018 04:17 AM, Julien Grall wrote:On 24/01/18 22:10, Martin Kelly wrote:Hi,Hello,Does anyone know if GPU passthrough is supported on ARM? (e.g. for a GPU integrated into an ARM SoC). I checked documentation and the code, but I couldn't tell for sure. If so, what are the hardware requirements for it? If not, is it feasible to do in the future?Xen Arm supports device integrated into an ARM SoC. In general we highly recommend to have the GPU behind an IOMMU. So passthrough would be fully secure. Does your platform has an IOMMU? If so which one? Do you know if the GPU is behind it? It would be possible to do passthrough without IOMMU, but that's more complex and would require some hack in Xen to make sure the guest memory is direct mapped (e.g guest physical address = host physical address). For more documentation on how to do it (see [1] and [2]). Cheers, [1] https://events.static.linuxfound.org/sites/events/files/slides/talk_5.pdf [2] https://wiki.xen.org/images/1/17/Device_passthrough_xen.pdfHi Julien, Thanks very much for the information. I'm looking at the Renesas R-Car H3 R8A7795, which has an IOMMU (using the Linux ipmmu-vmsa driver in drivers/iommu/ipmmu-vmsa.c). Looking at the device tree for it (r8a7795.dtsi), it appears you could pass through the display@feb00000 node for the DRM driver. I did notice this patch series, which didn't get merged: https://lists.xenproject.org/archives/html/xen-devel/2017-07/msg02679.html Presumably that driver would be needed in Xen. Are there any gotchas I'm missing? Is GPU passthrough on ARM something that is "theoretically doable" or something that has been done already and shown to be performant?I assume the H3 SoC version you are using is ES2.0, because of r8a7795.dtsi. BTW, what BSP version are you using? I am wondering what is your use-case? If you want to keep GPU in some dedicated domain without no hardware at all, you have to use something like PV DRM frontend running here and PV DRM backend in the hardware/driver domain. The things are going to be much simple if you pass through all required display sub-components as well, for the "rcar-du" DRM to be functional. Which way are you looking for?My BSP and kernel version is flexible, and I'd be happy to use whatever works best. The use-case is using OpenCL inside a VM for high-performance GPGPU.Sounds indeed interesting.This means that performance is critical, and I would go with whatever solution offers the best performance.Oh, I see.Anyway, in both cases you have to pass through GPU. For that some activities should be done: 1. Xen side: As for the patch series, you are right, you have to base on it. There are two separate patch series which haven't upstreamed yet, but needed for the passthrough feature to work on R-Car Gen3 SoCs (M3, H3). https://www.mail-archive.com/xen-devel@xxxxxxxxxxxxx/msg115901.html https://www.mail-archive.com/xen-devel@xxxxxxxxxxxxx/msg116038.html Also additional patch is needed to teach IPMMU-VMSA driver to handle devices which are hooked up to multiple IPMMU caches. Since the GPU on H3 SoC is connected to multiple IPMMU caches: PV0 - PV3. I have created new branch you can simply base on to get required support in hand. repo: https://github.com/otyshchenko1/xen.git branch: ipmmu_next 2. Device trees and guest config file: 2.1. You have to add following to the domain 0 device tree: There is no magic here. This is just to enable corresponding IPMMUs, hooked up GPU to them and notify Xen that device is going to be pass throughed. &gsx { xen,passthrough; iommus = <&ipmmu_pv0 0>, <&ipmmu_pv0 1>, <&ipmmu_pv0 2>, <&ipmmu_pv0 3>, <&ipmmu_pv0 4>, <&ipmmu_pv0 5>, <&ipmmu_pv0 6>, <&ipmmu_pv0 7>, <&ipmmu_pv1 0>, <&ipmmu_pv1 1>, <&ipmmu_pv1 2>, <&ipmmu_pv1 3>, <&ipmmu_pv1 4>, <&ipmmu_pv1 5>, <&ipmmu_pv1 6>, <&ipmmu_pv1 7>, <&ipmmu_pv2 0>, <&ipmmu_pv2 1>, <&ipmmu_pv2 2>, <&ipmmu_pv2 3>, <&ipmmu_pv2 4>, <&ipmmu_pv2 5>, <&ipmmu_pv2 6>, <&ipmmu_pv2 7>, <&ipmmu_pv3 0>, <&ipmmu_pv3 1>, <&ipmmu_pv3 2>, <&ipmmu_pv3 3>, <&ipmmu_pv3 4>, <&ipmmu_pv3 5>, <&ipmmu_pv3 6>, <&ipmmu_pv3 7>; }; &ipmmu_pv0 { status = "okay"; }; &ipmmu_pv1 { status = "okay"; }; &ipmmu_pv2 { status = "okay"; }; &ipmmu_pv3 { status = "okay"; }; &ipmmu_mm { status = "okay"; }; 2.2. You have to add following to the guest config file: I might mistake here, please use existing documentation to see how a guest config file should be properly modified. For example https://events.static.linuxfound.org/sites/events/files/slides/talk_5.pdf dtdev = [ "/soc/gsx@fd000000" ] irqs = [ 151 ] iomem = [ "fd000,40" ] device_tree = "domU.dtb" <- This is the guest partial device tree. 2.3 Actually the guest partial device tree I have used is: /dts-v1/; #include <dt-bindings/interrupt-controller/arm-gic.h> / { #address-cells = <2>; #size-cells = <2>; passthrough { compatible = "simple-bus"; ranges; #address-cells = <2>; #size-cells = <2>; gsx: gsx@fd000000 { compatible = "renesas,gsx"; reg = <0 0xfd000000 0 0x3ffff>; interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /*clocks = <&cpg CPG_MOD 112>;*/ /*power-domains = <&sysc R8A7795_PD_3DG_E>;*/ }; }; }; Hope this helps.Yes, this is certainly very helpful, thank you. Just to verify, it sounds like this would be HVM mode with the passthrough being transparent to the guest; is that correct?I am not sure that understood your question. I'm wondering what the GPU would like to the guest. Would it be the same interface as on a native machine, or would I need PV drivers? Also, do you know if it would be possible to share the GPU across multiple VMs, or would it be exclusive to a VM? I'm not sure whether the IOMMU supports this, or whether the DRM driver supports it.Xen assigns all devices to domain 0 (privileged domain) by default. With passthrough feature you can assign device to another VM, and it will be exclusive to that VM only. It is possible to share the GPU across multiple VMs, but it is yet another technique than passthrough. We have a solution to do so, but it hasn't gone public yet. We are going to redesign it. That sounds interesting; do you have any more details you could share? _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxxx https://lists.xenproject.org/mailman/listinfo/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |