[Xen-devel] [PATCH v2 00/10] Intel Processor Trace virtulization enabling

[Luwei Kang <luwei.kang@xxxxxxxxx>]

Hi All,

Here is a patch-series which adding Processor Trace enabling in XEN guest. You 
can get It's software developer manuals from:
https://software.intel.com/sites/default/files/managed/c5/15/architecture-instruction-set-extensions-programming-reference.pdf
In Chapter 4 INTEL PROCESSOR TRACE: VMX IMPROVEMENTS.

Introduction:
Intel Processor Trace (Intel PT) is an extension of Intel Architecture that 
captures information about software execution using dedicated hardware 
facilities that cause only minimal performance perturbation to the software 
being traced. Details on the Intel PT infrastructure and trace capabilities can 
be found in the Intel 64 and IA-32 Architectures Software Developer’s Manual, 
Volume 3C.

The suite of architecture changes serve to simplify the process of virtualizing 
Intel PT for use by a guest software. There are two primary elements to this 
new architecture support for VMX support improvements made for Intel PT.
1. Addition of a new guest IA32_RTIT_CTL value field to the VMCS.
  — This serves to speed and simplify the process of disabling trace on VM 
exit, and restoring it on VM entry.
2. Enabling use of EPT to redirect PT output.
  — This enables the VMM to elect to virtualize the PT output buffer using EPT. 
In this mode, the CPU will treat PT output addresses as Guest Physical 
Addresses (GPAs) and translate them using EPT. This means that Intel PT output 
reads (of the ToPA table) and writes (of trace output) can cause EPT 
violations, and other output events.


From v1:
 1. Rename the parameter to "ipt";
 2. Dynamic alloc the intel pt descriptor;
 3. Disable Intel PT when part of hardware enhancement not supported;
 4. Add some safty check before MSRs read/write;
 5. Add new VM-exit qualification;
 6. Not include introspection handler in this version.

Luwei Kang (10):
  x86: add an flag to enable Intel Processor Trace in guest
  x86: Configure VMCS for Intel Processor Trace virtualization
  x86: Add Intel Processor Trace support for cpuid
  x86: Add Intel Processor Trace MSRs and bit definitions
  x86: Implement Intel Processor Trace context switch
  x86: Introduce a new function to get capability of Intel PT
  x86: Add Intel Processor Trace MSRs read/write emulation
  x86: Introduce a function to check the value of RTIT_CTL
  x86: Disable Intel Processor Trace when VMXON in L1 guest
  x86: Handle new asynchronous exit qualification

 docs/misc/xen-command-line.markdown         |  10 +
 tools/libxc/xc_cpuid_x86.c                  |  12 +-
 xen/arch/x86/cpu/Makefile                   |   1 +
 xen/arch/x86/cpu/ipt.c                      | 424 ++++++++++++++++++++++++++++
 xen/arch/x86/cpuid.c                        |  22 ++
 xen/arch/x86/domctl.c                       |   5 +
 xen/arch/x86/hvm/hvm.c                      |   8 +-
 xen/arch/x86/hvm/vmx/vmcs.c                 |  37 ++-
 xen/arch/x86/hvm/vmx/vmx.c                  |  33 +++
 xen/arch/x86/hvm/vmx/vvmx.c                 |  13 +-
 xen/include/asm-x86/cpufeature.h            |   1 +
 xen/include/asm-x86/cpuid.h                 |  12 +-
 xen/include/asm-x86/hvm/vmx/vmcs.h          |  10 +
 xen/include/asm-x86/hvm/vmx/vmx.h           |   8 +-
 xen/include/asm-x86/ipt.h                   |  76 +++++
 xen/include/asm-x86/msr-index.h             |  37 +++
 xen/include/public/arch-x86/cpufeatureset.h |   1 +
 xen/include/xen/mm.h                        |   1 +
 18 files changed, 696 insertions(+), 15 deletions(-)
 create mode 100644 xen/arch/x86/cpu/ipt.c
 create mode 100644 xen/include/asm-x86/ipt.h

-- 
1.8.3.1


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/mailman/listinfo/xen-devel