[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] [PATCH v2 4/6] x86: bring up all CPUs even if not all are supposed to be used



Reportedly Intel CPUs which can't broadcast #MC to all targeted
cores/threads because some have CR4.MCE clear will shut down. Therefore
we want to keep CR4.MCE enabled when offlining a CPU, and we need to
bring up all CPUs in order to be able to set CR4.MCE in the first place.

The use of clear_in_cr4() in cpu_mcheck_disable() was ill advised
anyway, and to avoid future similar mistakes I'm removing clear_in_cr4()
altogether right here.

Signed-off-by: Jan Beulich <jbeulich@xxxxxxxx>
---
v2: Use ROUNDUP().
---
Instead of fully bringing up CPUs and then calling cpu_down(), another
option would be to suppress/cancel full bringup in smp_callin(). But I
guess we should try to keep things simple for now, and see later whether
this can be "optimized".
---
Note: The parked CPUs can be brought online (i.e. the meaning of
      "maxcpus=" isn't as strict anymore as it was before), but won't
      immediately be used for scheduling pre-existing Dom0 CPUs. That's
      because dom0_setup_vcpu() artifically restricts the affinity. For
      DomU-s whose affinity was not artifically restricted, no such
      limitation exists, albeit the shown "soft" affinity appears to
      suffer a similar issue. As that's not a goal of this patch, I've
      put the issues on the side for now, perhaps for someone else to
      take care of.
Note: On one of my test systems the parked CPUs get _PSD data reported
      by Dom0 that is different from the non-parked ones (coord_type is
      0xFC instead of 0xFE). Giving Dom0 enough vCPU-s eliminates this
      problem, so there is apparently something amiss in the processor
      driver. I've tried to figure out what, but I couldn't, despite the
      AML suggesting that this might be some _OSC invocation (but if it
      is, I can't find it - acpi_run_osc() clearly does not anywhere get
      invoked in a per-CPU fashion).

--- a/xen/arch/x86/cpu/common.c
+++ b/xen/arch/x86/cpu/common.c
@@ -13,6 +13,7 @@
 #include <public/sysctl.h> /* for XEN_INVALID_{SOCKET,CORE}_ID */
 
 #include "cpu.h"
+#include "mcheck/x86_mca.h"
 
 bool_t opt_arat = 1;
 boolean_param("arat", opt_arat);
@@ -343,6 +344,9 @@ static void __init early_cpu_detect(void
                        hap_paddr_bits = PADDR_BITS;
        }
 
+       if (c->x86_vendor != X86_VENDOR_AMD)
+               park_offline_cpus = opt_mce;
+
        initialize_cpu_data(0);
 }
 
--- a/xen/arch/x86/cpu/mcheck/mce_intel.c
+++ b/xen/arch/x86/cpu/mcheck/mce_intel.c
@@ -636,8 +636,6 @@ static void clear_cmci(void)
 
 static void cpu_mcheck_disable(void)
 {
-    clear_in_cr4(X86_CR4_MCE);
-
     if ( cmci_support && opt_mce )
         clear_cmci();
 }
--- a/xen/arch/x86/mpparse.c
+++ b/xen/arch/x86/mpparse.c
@@ -68,19 +68,26 @@ physid_mask_t phys_cpu_present_map;
 
 void __init set_nr_cpu_ids(unsigned int max_cpus)
 {
+       unsigned int tot_cpus = num_processors + disabled_cpus;
+
        if (!max_cpus)
-               max_cpus = num_processors + disabled_cpus;
+               max_cpus = tot_cpus;
        if (max_cpus > NR_CPUS)
                max_cpus = NR_CPUS;
        else if (!max_cpus)
                max_cpus = 1;
        printk(XENLOG_INFO "SMP: Allowing %u CPUs (%d hotplug CPUs)\n",
               max_cpus, max_t(int, max_cpus - num_processors, 0));
-       nr_cpu_ids = max_cpus;
+
+       if (!park_offline_cpus)
+               tot_cpus = max_cpus;
+       nr_cpu_ids = min(tot_cpus, NR_CPUS + 0u);
+       if (park_offline_cpus && nr_cpu_ids < num_processors)
+               printk(XENLOG_WARNING "SMP: Cannot bring up %u further CPUs\n",
+                      num_processors - nr_cpu_ids);
 
 #ifndef nr_cpumask_bits
-       nr_cpumask_bits = (max_cpus + (BITS_PER_LONG - 1)) &
-                         ~(BITS_PER_LONG - 1);
+       nr_cpumask_bits = ROUNDUP(nr_cpu_ids, BITS_PER_LONG);
        printk(XENLOG_DEBUG "NR_CPUS:%u nr_cpumask_bits:%u\n",
               NR_CPUS, nr_cpumask_bits);
 #endif
--- a/xen/arch/x86/setup.c
+++ b/xen/arch/x86/setup.c
@@ -665,7 +665,7 @@ void __init noreturn __start_xen(unsigne
 {
     char *memmap_type = NULL;
     char *cmdline, *kextra, *loader;
-    unsigned int initrdidx;
+    unsigned int initrdidx, num_parked = 0;
     multiboot_info_t *mbi;
     module_t *mod;
     unsigned long nr_pages, raw_max_page, modules_headroom, *module_map;
@@ -1512,7 +1512,8 @@ void __init noreturn __start_xen(unsigne
     else
     {
         set_nr_cpu_ids(max_cpus);
-        max_cpus = nr_cpu_ids;
+        if ( !max_cpus )
+            max_cpus = nr_cpu_ids;
     }
 
     if ( xen_guest )
@@ -1635,16 +1636,27 @@ void __init noreturn __start_xen(unsigne
             /* Set up node_to_cpumask based on cpu_to_node[]. */
             numa_add_cpu(i);
 
-            if ( (num_online_cpus() < max_cpus) && !cpu_online(i) )
+            if ( (park_offline_cpus || num_online_cpus() < max_cpus) &&
+                 !cpu_online(i) )
             {
                 int ret = cpu_up(i);
                 if ( ret != 0 )
                     printk("Failed to bring up CPU %u (error %d)\n", i, ret);
+                else if ( num_online_cpus() > max_cpus )
+                {
+                    ret = cpu_down(i);
+                    if ( !ret )
+                        ++num_parked;
+                    else
+                        printk("Could not re-offline CPU%u (%d)\n", i, ret);
+                }
             }
         }
     }
 
     printk("Brought up %ld CPUs\n", (long)num_online_cpus());
+    if ( num_parked )
+        printk(XENLOG_INFO "Parked %u CPUs\n", num_parked);
     smp_cpus_done();
 
     do_initcalls();
--- a/xen/include/asm-x86/processor.h
+++ b/xen/include/asm-x86/processor.h
@@ -342,12 +342,6 @@ static always_inline void set_in_cr4 (un
     write_cr4(read_cr4() | mask);
 }
 
-static always_inline void clear_in_cr4 (unsigned long mask)
-{
-    mmu_cr4_features &= ~mask;
-    write_cr4(read_cr4() & ~mask);
-}
-
 static inline unsigned int read_pkru(void)
 {
     unsigned int pkru;




_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/mailman/listinfo/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.