[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] Porting XEN hypervisor on iMX8QM

Hi Ravi,

Please have a look at our wiki as a reference:

I would start from cross-compiling the Xen hypervisor (the xen/
directory), no need to build the Xen userspace tools initially.
Make sure to have the right early boot uart driver, see
CONFIG_EARLY_PRINTK and docs/misc/arm/early-printk.txt.

After you boot the Xen binary from uboot, you should be able to see some
console output from the hypervisror. The step after that is booting



On Mon, 5 Nov 2018, Ravi Pichholiya wrote:
> Hi Stefano,
> This is in reference to our LinkedIn discussion, in our one of the project we 
> need to port XEN hypervisor on iMx8QM.
> Request you to share what all visibility we should require from boot 
> prospective as currently we are having access to Device tree
> and U-boot source code only. Is access to any other files are also required?
> Also some reference to start with the porting of XEN if available with you.
> Thanks & Regards,
> Ravi Pichholiya
Xen-devel mailing list



Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.