[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Porting Xen to Jetson Nano

On 27/07/2020 23:09, Srinivas Bangalore wrote:

On 24/07/2020 16:01, Srinivas Bangalore wrote:
Hi Julien,


Thanks for the tips. Comments inline...

I struggled to find your comment inline as your e-mail client doesn't quote
my answer. Please configure your e-mail client to use some form of quoting
(the usual is '>').

[<SB>] Done! Sorry about that.

Thanks this is a good start. Unfortunately, it doesn't fully help it when you have a reply split accross multiple line. This is become more proeminent after a few back and forth. Which e-mail client are you using?

[<SB>] OK, I started porting the patch series to 4.14, but it is definitely
not straightforward ;) Will take some time to do this. BTW, I was looking at
xen/arch/arm/Rules.mk in 4.14 and it is blank. The previous releases had
some board-specific stuff in this file - esp the EARLY_PRINTK definitions.
Has this changed in 4.14?

earlyprintk can now be configured using Kconfig. This should be easier to configure as you can do it the same way as you would for other options.


Julien Grall



Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.