[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [PATCH for-4.17 v3 1/2] amd/virt_ssbd: set SSBD at vCPU context switch
The current logic for AMD SSBD context switches it on every vm{entry,exit} if the Xen and guest selections don't match. This is expensive when not using SPEC_CTRL, and hence should be avoided as much as possible. When SSBD is not being set from SPEC_CTRL on AMD don't context switch at vm{entry,exit} and instead only context switch SSBD when switching vCPUs. This has the side effect of running Xen code with the guest selection of SSBD, the documentation is updated to note this behavior. Also note that then when `ssbd` is selected on the command line guest SSBD selection will not have an effect, and the hypervisor will run with SSBD unconditionally enabled when not using SPEC_CTRL itself. This fixes an issue with running C code in a GIF=0 region, that's problematic when using UBSAN or other instrumentation techniques. As a result of no longer running the code to set SSBD in a GIF=0 region the locking of amd_set_legacy_ssbd() can be done using normal spinlocks, and some more checks can be added to assure it works as intended. Finally it's also worth noticing that since the guest SSBD selection is no longer set on vmentry the VIRT_SPEC_MSR handling needs to propagate the value to the hardware as part of handling the wrmsr. Signed-off-by: Roger Pau Monné <roger.pau@xxxxxxxxxx> --- Changes since v2: - Fix calling set_reg unconditionally. - Fix comment. - Call amd_set_ssbd() from guest_wrmsr(). Changes since v1: - Just check virt_spec_ctrl value != 0 on context switch. - Remove stray asm newline. - Use val in svm_set_reg(). - Fix style in amd.c. - Do not clear ssbd --- docs/misc/xen-command-line.pandoc | 10 +++--- xen/arch/x86/cpu/amd.c | 55 +++++++++++++++++-------------- xen/arch/x86/hvm/svm/entry.S | 6 ---- xen/arch/x86/hvm/svm/svm.c | 45 ++++++++++--------------- xen/arch/x86/include/asm/amd.h | 2 +- xen/arch/x86/msr.c | 9 +++++ 6 files changed, 63 insertions(+), 64 deletions(-) diff --git a/docs/misc/xen-command-line.pandoc b/docs/misc/xen-command-line.pandoc index 0fbdcb574f..424b12cfb2 100644 --- a/docs/misc/xen-command-line.pandoc +++ b/docs/misc/xen-command-line.pandoc @@ -2372,10 +2372,12 @@ By default, Xen will use STIBP when IBRS is in use (IBRS implies STIBP), and when hardware hints recommend using it as a blanket setting. On hardware supporting SSBD (Speculative Store Bypass Disable), the `ssbd=` -option can be used to force or prevent Xen using the feature itself. On AMD -hardware, this is a global option applied at boot, and not virtualised for -guest use. On Intel hardware, the feature is virtualised for guests, -independently of Xen's choice of setting. +option can be used to force or prevent Xen using the feature itself. The +feature is virtualised for guests, independently of Xen's choice of setting. +On AMD hardware, disabling Xen SSBD usage on the command line (`ssbd=0` which +is the default value) can lead to Xen running with the guest SSBD selection +depending on hardware support, on the same hardware setting `ssbd=1` will +result in SSBD always being enabled, regardless of guest choice. On hardware supporting PSFD (Predictive Store Forwarding Disable), the `psfd=` option can be used to force or prevent Xen using the feature itself. By diff --git a/xen/arch/x86/cpu/amd.c b/xen/arch/x86/cpu/amd.c index 98c52d0686..05d72c6501 100644 --- a/xen/arch/x86/cpu/amd.c +++ b/xen/arch/x86/cpu/amd.c @@ -742,7 +742,7 @@ void amd_init_ssbd(const struct cpuinfo_x86 *c) } static struct ssbd_ls_cfg { - bool locked; + spinlock_t lock; unsigned int count; } __cacheline_aligned *ssbd_ls_cfg; static unsigned int __ro_after_init ssbd_max_cores; @@ -753,7 +753,7 @@ bool __init amd_setup_legacy_ssbd(void) unsigned int i; if ((boot_cpu_data.x86 != 0x17 && boot_cpu_data.x86 != 0x18) || - boot_cpu_data.x86_num_siblings <= 1) + boot_cpu_data.x86_num_siblings <= 1 || opt_ssbd) return true; /* @@ -776,46 +776,51 @@ bool __init amd_setup_legacy_ssbd(void) if (!ssbd_ls_cfg) return false; - if (opt_ssbd) - for (i = 0; i < ssbd_max_cores * AMD_FAM17H_MAX_SOCKETS; i++) - /* Set initial state, applies to any (hotplug) CPU. */ - ssbd_ls_cfg[i].count = boot_cpu_data.x86_num_siblings; + for (i = 0; i < ssbd_max_cores * AMD_FAM17H_MAX_SOCKETS; i++) + spin_lock_init(&ssbd_ls_cfg[i].lock); return true; } -/* - * Executed from GIF==0 context: avoid using BUG/ASSERT or other functionality - * that relies on exceptions as those are not expected to run in GIF==0 - * context. - */ -void amd_set_legacy_ssbd(bool enable) +static void core_set_legacy_ssbd(bool enable) { const struct cpuinfo_x86 *c = ¤t_cpu_data; struct ssbd_ls_cfg *status; + unsigned long flags; if ((c->x86 != 0x17 && c->x86 != 0x18) || c->x86_num_siblings <= 1) { - set_legacy_ssbd(c, enable); + BUG_ON(!set_legacy_ssbd(c, enable)); return; } + BUG_ON(c->phys_proc_id >= AMD_FAM17H_MAX_SOCKETS); + BUG_ON(c->cpu_core_id >= ssbd_max_cores); status = &ssbd_ls_cfg[c->phys_proc_id * ssbd_max_cores + c->cpu_core_id]; - /* - * Open code a very simple spinlock: this function is used with GIF==0 - * and different IF values, so would trigger the checklock detector. - * Instead of trying to workaround the detector, use a very simple lock - * implementation: it's better to reduce the amount of code executed - * with GIF==0. - */ - while (test_and_set_bool(status->locked)) - cpu_relax(); + spin_lock_irqsave(&status->lock, flags); status->count += enable ? 1 : -1; + ASSERT(status->count <= c->x86_num_siblings); if (enable ? status->count == 1 : !status->count) - set_legacy_ssbd(c, enable); - barrier(); - write_atomic(&status->locked, false); + BUG_ON(!set_legacy_ssbd(c, enable)); + spin_unlock_irqrestore(&status->lock, flags); +} + +void amd_set_ssbd(bool enable) +{ + if (opt_ssbd) + /* + * Ignore attempts to turn off SSBD, it's hardcoded on the + * command line. + */ + return; + + if (cpu_has_virt_ssbd) + wrmsr(MSR_VIRT_SPEC_CTRL, enable ? SPEC_CTRL_SSBD : 0, 0); + else if (amd_legacy_ssbd) + core_set_legacy_ssbd(enable); + else + ASSERT_UNREACHABLE(); } /* diff --git a/xen/arch/x86/hvm/svm/entry.S b/xen/arch/x86/hvm/svm/entry.S index a26589aa9a..981cd82e7c 100644 --- a/xen/arch/x86/hvm/svm/entry.S +++ b/xen/arch/x86/hvm/svm/entry.S @@ -59,9 +59,6 @@ __UNLIKELY_END(nsvm_hap) clgi - ALTERNATIVE "", STR(call vmentry_virt_spec_ctrl), \ - X86_FEATURE_VIRT_SC_MSR_HVM - /* WARNING! `ret`, `call *`, `jmp *` not safe beyond this point. */ /* SPEC_CTRL_EXIT_TO_SVM Req: b=curr %rsp=regs/cpuinfo, Clob: acd */ .macro svm_vmentry_spec_ctrl @@ -131,9 +128,6 @@ __UNLIKELY_END(nsvm_hap) ALTERNATIVE "", svm_vmexit_spec_ctrl, X86_FEATURE_SC_MSR_HVM /* WARNING! `ret`, `call *`, `jmp *` not safe before this point. */ - ALTERNATIVE "", STR(call vmexit_virt_spec_ctrl), \ - X86_FEATURE_VIRT_SC_MSR_HVM - /* * STGI is executed unconditionally, and is sufficiently serialising * to safely resolve any Spectre-v1 concerns in the above logic. diff --git a/xen/arch/x86/hvm/svm/svm.c b/xen/arch/x86/hvm/svm/svm.c index 1aeaabcb13..8b101d4f27 100644 --- a/xen/arch/x86/hvm/svm/svm.c +++ b/xen/arch/x86/hvm/svm/svm.c @@ -973,6 +973,16 @@ static void cf_check svm_ctxt_switch_from(struct vcpu *v) /* Resume use of ISTs now that the host TR is reinstated. */ enable_each_ist(idt_tables[cpu]); + + /* + * Clear previous guest selection of SSBD if set. Note that SPEC_CTRL.SSBD + * is already cleared by svm_vmexit_spec_ctrl. + */ + if ( v->arch.msrs->virt_spec_ctrl.raw & SPEC_CTRL_SSBD ) + { + ASSERT(v->domain->arch.cpuid->extd.virt_ssbd); + amd_set_ssbd(false); + } } static void cf_check svm_ctxt_switch_to(struct vcpu *v) @@ -1000,6 +1010,13 @@ static void cf_check svm_ctxt_switch_to(struct vcpu *v) if ( cpu_has_msr_tsc_aux ) wrmsr_tsc_aux(v->arch.msrs->tsc_aux); + + /* Load SSBD if set by the guest. */ + if ( v->arch.msrs->virt_spec_ctrl.raw & SPEC_CTRL_SSBD ) + { + ASSERT(v->domain->arch.cpuid->extd.virt_ssbd); + amd_set_ssbd(true); + } } static void noreturn cf_check svm_do_resume(void) @@ -3116,34 +3133,6 @@ void svm_vmexit_handler(struct cpu_user_regs *regs) vmcb_set_vintr(vmcb, intr); } -/* Called with GIF=0. */ -void vmexit_virt_spec_ctrl(void) -{ - unsigned int val = opt_ssbd ? SPEC_CTRL_SSBD : 0; - - if ( val == current->arch.msrs->virt_spec_ctrl.raw ) - return; - - if ( cpu_has_virt_ssbd ) - wrmsr(MSR_VIRT_SPEC_CTRL, val, 0); - else - amd_set_legacy_ssbd(val); -} - -/* Called with GIF=0. */ -void vmentry_virt_spec_ctrl(void) -{ - unsigned int val = current->arch.msrs->virt_spec_ctrl.raw; - - if ( val == (opt_ssbd ? SPEC_CTRL_SSBD : 0) ) - return; - - if ( cpu_has_virt_ssbd ) - wrmsr(MSR_VIRT_SPEC_CTRL, val, 0); - else - amd_set_legacy_ssbd(val); -} - /* * Local variables: * mode: C diff --git a/xen/arch/x86/include/asm/amd.h b/xen/arch/x86/include/asm/amd.h index 6a42f68542..81ed71710f 100644 --- a/xen/arch/x86/include/asm/amd.h +++ b/xen/arch/x86/include/asm/amd.h @@ -153,6 +153,6 @@ void amd_check_disable_c1e(unsigned int port, u8 value); extern bool amd_legacy_ssbd; bool amd_setup_legacy_ssbd(void); -void amd_set_legacy_ssbd(bool enable); +void amd_set_ssbd(bool enable); #endif /* __AMD_H__ */ diff --git a/xen/arch/x86/msr.c b/xen/arch/x86/msr.c index 95416995a5..5609b71e99 100644 --- a/xen/arch/x86/msr.c +++ b/xen/arch/x86/msr.c @@ -24,6 +24,7 @@ #include <xen/nospec.h> #include <xen/sched.h> +#include <asm/amd.h> #include <asm/debugreg.h> #include <asm/hvm/nestedhvm.h> #include <asm/hvm/viridian.h> @@ -697,7 +698,15 @@ int guest_wrmsr(struct vcpu *v, uint32_t msr, uint64_t val) msrs->spec_ctrl.raw &= ~SPEC_CTRL_SSBD; } else + { msrs->virt_spec_ctrl.raw = val & SPEC_CTRL_SSBD; + if ( v == curr ) + /* + * Propagate the value to hardware, as it won't be set on guest + * resume path. + */ + amd_set_ssbd(val & SPEC_CTRL_SSBD); + } break; case MSR_AMD64_DE_CFG: -- 2.37.3
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |