|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [PATCH v2 1/8] xen/x86: Add initial x2APIC ID to the per-vLAPIC save area
On Wed, May 08, 2024 at 01:39:20PM +0100, Alejandro Vallejo wrote:
> This allows the initial x2APIC ID to be sent on the migration stream. The
> hardcoded mapping x2apic_id=2*vcpu_id is maintained for the time being.
> Given the vlapic data is zero-extended on restore, fix up migrations from
> hosts without the field by setting it to the old convention if zero.
>
> x2APIC IDs are calculated from the CPU policy where the guest topology is
> defined. For the time being, the function simply returns the old
> relationship, but will eventually return results consistent with the
> topology.
>
> Signed-off-by: Alejandro Vallejo <alejandro.vallejo@xxxxxxxxx>
> ---
> v2:
> * Removed usage of SET_xAPIC_ID().
> * Restored previous logic when exposing leaf 0xb, and gate it for HVM only.
> * Rewrote comment in lapic_load_fixup, including the implicit assumption.
> * Moved vlapic_cpu_policy_changed() into hvm_cpuid_policy_changed())
> * const-ified policy in vlapic_cpu_policy_changed()
> ---
> xen/arch/x86/cpuid.c | 15 ++++---------
> xen/arch/x86/hvm/vlapic.c | 30 ++++++++++++++++++++++++--
> xen/arch/x86/include/asm/hvm/hvm.h | 1 +
> xen/arch/x86/include/asm/hvm/vlapic.h | 2 ++
> xen/include/public/arch-x86/hvm/save.h | 2 ++
> xen/include/xen/lib/x86/cpu-policy.h | 9 ++++++++
> xen/lib/x86/policy.c | 11 ++++++++++
> 7 files changed, 57 insertions(+), 13 deletions(-)
>
> diff --git a/xen/arch/x86/cpuid.c b/xen/arch/x86/cpuid.c
> index 7a38e032146a..242c21ec5bb6 100644
> --- a/xen/arch/x86/cpuid.c
> +++ b/xen/arch/x86/cpuid.c
> @@ -139,10 +139,9 @@ void guest_cpuid(const struct vcpu *v, uint32_t leaf,
> const struct cpu_user_regs *regs;
>
> case 0x1:
> - /* TODO: Rework topology logic. */
> res->b &= 0x00ffffffu;
> if ( is_hvm_domain(d) )
> - res->b |= (v->vcpu_id * 2) << 24;
> + res->b |= vlapic_x2apic_id(vcpu_vlapic(v)) << 24;
>
> /* TODO: Rework vPMU control in terms of toolstack choices. */
> if ( vpmu_available(v) &&
> @@ -311,19 +310,13 @@ void guest_cpuid(const struct vcpu *v, uint32_t leaf,
> break;
>
> case 0xb:
> - /*
> - * In principle, this leaf is Intel-only. In practice, it is tightly
> - * coupled with x2apic, and we offer an x2apic-capable APIC emulation
> - * to guests on AMD hardware as well.
> - *
> - * TODO: Rework topology logic.
> - */
> - if ( p->basic.x2apic )
> + /* Don't expose topology information to PV guests */
Not sure whether we want to keep part of the comment about exposing
x2APIC to guests even when x2APIC is not present in the host. I think
this code has changed and the comment is kind of stale now.
> + if ( is_hvm_domain(d) && p->basic.x2apic )
> {
> *(uint8_t *)&res->c = subleaf;
>
> /* Fix the x2APIC identifier. */
> - res->d = v->vcpu_id * 2;
> + res->d = vlapic_x2apic_id(vcpu_vlapic(v));
> }
> break;
>
> diff --git a/xen/arch/x86/hvm/vlapic.c b/xen/arch/x86/hvm/vlapic.c
> index 05072a21bf38..61a96474006b 100644
> --- a/xen/arch/x86/hvm/vlapic.c
> +++ b/xen/arch/x86/hvm/vlapic.c
> @@ -1069,7 +1069,7 @@ static uint32_t x2apic_ldr_from_id(uint32_t id)
> static void set_x2apic_id(struct vlapic *vlapic)
> {
> const struct vcpu *v = vlapic_vcpu(vlapic);
> - uint32_t apic_id = v->vcpu_id * 2;
> + uint32_t apic_id = vlapic->hw.x2apic_id;
> uint32_t apic_ldr = x2apic_ldr_from_id(apic_id);
>
> /*
> @@ -1083,6 +1083,22 @@ static void set_x2apic_id(struct vlapic *vlapic)
> vlapic_set_reg(vlapic, APIC_LDR, apic_ldr);
> }
>
> +void vlapic_cpu_policy_changed(struct vcpu *v)
> +{
> + struct vlapic *vlapic = vcpu_vlapic(v);
> + const struct cpu_policy *cp = v->domain->arch.cpu_policy;
> +
> + /*
> + * Don't override the initial x2APIC ID if we have migrated it or
> + * if the domain doesn't have vLAPIC at all.
> + */
> + if ( !has_vlapic(v->domain) || vlapic->loaded.hw )
> + return;
> +
> + vlapic->hw.x2apic_id = x86_x2apic_id_from_vcpu_id(cp, v->vcpu_id);
> + vlapic_set_reg(vlapic, APIC_ID, SET_xAPIC_ID(vlapic->hw.x2apic_id));
Nit: in case we decide to start APICs in x2APIC mode, might be good to
take this into account here and use vlapic_x2apic_mode(vlapic) to
select whether SET_xAPIC_ID() needs to be used or not:
vlapic_set_reg(vlapic, APIC_ID,
vlapic_x2apic_mode(vlapic) ? vlapic->hw.x2apic_id
: SET_xAPIC_ID(vlapic->hw.x2apic_id));
Or similar.
> +}
> +
> int guest_wrmsr_apic_base(struct vcpu *v, uint64_t val)
> {
> const struct cpu_policy *cp = v->domain->arch.cpu_policy;
> @@ -1449,7 +1465,7 @@ void vlapic_reset(struct vlapic *vlapic)
> if ( v->vcpu_id == 0 )
> vlapic->hw.apic_base_msr |= APIC_BASE_BSP;
>
> - vlapic_set_reg(vlapic, APIC_ID, (v->vcpu_id * 2) << 24);
> + vlapic_set_reg(vlapic, APIC_ID, SET_xAPIC_ID(vlapic->hw.x2apic_id));
> vlapic_do_init(vlapic);
> }
>
> @@ -1514,6 +1530,16 @@ static void lapic_load_fixup(struct vlapic *vlapic)
> const struct vcpu *v = vlapic_vcpu(vlapic);
> uint32_t good_ldr = x2apic_ldr_from_id(vlapic->loaded.id);
>
> + /*
> + * Loading record without hw.x2apic_id in the save stream, calculate
> using
> + * the traditional "vcpu_id * 2" relation. There's an implicit assumption
> + * that vCPU0 always has x2APIC0, which is true for the old relation, and
> + * still holds under the new x2APIC generation algorithm. While that case
> + * goes through the conditional it's benign because it still maps to
> zero.
> + */
> + if ( !vlapic->hw.x2apic_id )
> + vlapic->hw.x2apic_id = v->vcpu_id * 2;
> +
> /* Skip fixups on xAPIC mode, or if the x2APIC LDR is already correct */
> if ( !vlapic_x2apic_mode(vlapic) ||
> (vlapic->loaded.ldr == good_ldr) )
> diff --git a/xen/arch/x86/include/asm/hvm/hvm.h
> b/xen/arch/x86/include/asm/hvm/hvm.h
> index 0c9e6f15645d..e1f0585d75a9 100644
> --- a/xen/arch/x86/include/asm/hvm/hvm.h
> +++ b/xen/arch/x86/include/asm/hvm/hvm.h
> @@ -448,6 +448,7 @@ static inline void hvm_update_guest_efer(struct vcpu *v)
> static inline void hvm_cpuid_policy_changed(struct vcpu *v)
> {
> alternative_vcall(hvm_funcs.cpuid_policy_changed, v);
> + vlapic_cpu_policy_changed(v);
Note sure whether this call would better be placed in
cpu_policy_updated() inside the is_hvm_vcpu() conditional branch.
hvm_cpuid_policy_changed() &c are just wrappers around the hvm_funcs
hooks, pulling vlapic functions in there is likely to complicate the
header dependencies in the long term.
> }
>
> static inline void hvm_set_tsc_offset(struct vcpu *v, uint64_t offset,
> diff --git a/xen/arch/x86/include/asm/hvm/vlapic.h
> b/xen/arch/x86/include/asm/hvm/vlapic.h
> index 88ef94524339..e8d41313abd3 100644
> --- a/xen/arch/x86/include/asm/hvm/vlapic.h
> +++ b/xen/arch/x86/include/asm/hvm/vlapic.h
> @@ -44,6 +44,7 @@
> #define vlapic_xapic_mode(vlapic) \
> (!vlapic_hw_disabled(vlapic) && \
> !((vlapic)->hw.apic_base_msr & APIC_BASE_EXTD))
> +#define vlapic_x2apic_id(vlapic) ((vlapic)->hw.x2apic_id)
>
> /*
> * Generic APIC bitmap vector update & search routines.
> @@ -107,6 +108,7 @@ int vlapic_ack_pending_irq(struct vcpu *v, int vector,
> bool force_ack);
>
> int vlapic_init(struct vcpu *v);
> void vlapic_destroy(struct vcpu *v);
> +void vlapic_cpu_policy_changed(struct vcpu *v);
>
> void vlapic_reset(struct vlapic *vlapic);
>
> diff --git a/xen/include/public/arch-x86/hvm/save.h
> b/xen/include/public/arch-x86/hvm/save.h
> index 7ecacadde165..1c2ec669ffc9 100644
> --- a/xen/include/public/arch-x86/hvm/save.h
> +++ b/xen/include/public/arch-x86/hvm/save.h
> @@ -394,6 +394,8 @@ struct hvm_hw_lapic {
> uint32_t disabled; /* VLAPIC_xx_DISABLED */
> uint32_t timer_divisor;
> uint64_t tdt_msr;
> + uint32_t x2apic_id;
> + uint32_t rsvd_zero;
I think Jan requested for this field to be checked to be 0 for
incoming migrations, yet I don't see such check added.
> };
>
> DECLARE_HVM_SAVE_TYPE(LAPIC, 5, struct hvm_hw_lapic);
> diff --git a/xen/include/xen/lib/x86/cpu-policy.h
> b/xen/include/xen/lib/x86/cpu-policy.h
> index d5e447e9dc06..392320b9adbe 100644
> --- a/xen/include/xen/lib/x86/cpu-policy.h
> +++ b/xen/include/xen/lib/x86/cpu-policy.h
> @@ -542,6 +542,15 @@ int x86_cpu_policies_are_compatible(const struct
> cpu_policy *host,
> const struct cpu_policy *guest,
> struct cpu_policy_errors *err);
>
> +/**
> + * Calculates the x2APIC ID of a vCPU given a CPU policy
> + *
> + * @param p CPU policy of the domain.
> + * @param id vCPU ID of the vCPU.
> + * @returns x2APIC ID of the vCPU.
> + */
> +uint32_t x86_x2apic_id_from_vcpu_id(const struct cpu_policy *p, uint32_t id);
> +
> #endif /* !XEN_LIB_X86_POLICIES_H */
>
> /*
> diff --git a/xen/lib/x86/policy.c b/xen/lib/x86/policy.c
> index f033d22785be..4cef658feeb8 100644
> --- a/xen/lib/x86/policy.c
> +++ b/xen/lib/x86/policy.c
> @@ -2,6 +2,17 @@
>
> #include <xen/lib/x86/cpu-policy.h>
>
> +uint32_t x86_x2apic_id_from_vcpu_id(const struct cpu_policy *p, uint32_t id)
> +{
> + /*
> + * TODO: Derive x2APIC ID from the topology information inside `p`
> + * rather than from vCPU ID. This bodge is a temporary measure
> + * until all infra is in place to retrieve or derive the initial
> + * x2APIC ID from migrated domains.
> + */
> + return vcpu_id * 2;
I don't think this builds?
Note the parameter is plain 'id' not 'vcpu_id'.
Thanks, Roger.
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |