[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH v2 11/17] xen/riscv: implement p2m_set_entry() and __p2m_set_entry()
- To: Jan Beulich <jbeulich@xxxxxxxx>
- From: Oleksii Kurochko <oleksii.kurochko@xxxxxxxxx>
- Date: Tue, 8 Jul 2025 11:01:18 +0200
- Cc: Alistair Francis <alistair.francis@xxxxxxx>, Bob Eshleman <bobbyeshleman@xxxxxxxxx>, Connor Davis <connojdavis@xxxxxxxxx>, Andrew Cooper <andrew.cooper3@xxxxxxxxxx>, Anthony PERARD <anthony.perard@xxxxxxxxxx>, Michal Orzel <michal.orzel@xxxxxxx>, Julien Grall <julien@xxxxxxx>, Roger Pau Monné <roger.pau@xxxxxxxxxx>, Stefano Stabellini <sstabellini@xxxxxxxxxx>, xen-devel@xxxxxxxxxxxxxxxxxxxx
- Delivery-date: Tue, 08 Jul 2025 09:01:32 +0000
- List-id: Xen developer discussion <xen-devel.lists.xenproject.org>
On 7/8/25 9:10 AM, Jan Beulich wrote:
On 07.07.2025 18:10, Oleksii Kurochko wrote:
On 7/7/25 5:15 PM, Jan Beulich wrote:
On 07.07.2025 17:00, Oleksii Kurochko wrote:
On 7/7/25 2:53 PM, Jan Beulich wrote:
On 07.07.2025 13:46, Oleksii Kurochko wrote:
On 7/7/25 9:20 AM, Jan Beulich wrote:
On 04.07.2025 17:01, Oleksii Kurochko wrote:
On 7/1/25 3:49 PM, Jan Beulich wrote:
On 10.06.2025 15:05, Oleksii Kurochko wrote:
+{
+ panic("%s: isn't implemented for now\n", __func__);
+
+ return false;
+}
For this function in particular, though: Besides the "p2me" in the name
being somewhat odd (supposedly page table entries here are simply pte_t),
how is this going to be different from pte_is_valid()?
pte_is_valid() is checking a real bit of PTE, but p2me_is_valid() is checking
what is a type stored in the radix tree (p2m->p2m_types):
/*
* In the case of the P2M, the valid bit is used for other purpose. Use
* the type to check whether an entry is valid.
*/
static inline bool p2me_is_valid(struct p2m_domain *p2m, pte_t pte)
{
return p2m_type_radix_get(p2m, pte) != p2m_invalid;
}
It is done to track which page was modified by a guest.
But then (again) the name doesn't convey what the function does.
Then probably p2me_type_is_valid(struct p2m_domain *p2m, pte_t pte) would better.
For P2M type checks please don't invent new naming, but use what both x86
and Arm are already using. Note how we already have p2m_is_valid() in that
set. Just that it's not doing what you want here.
Hm, why not doing what I want? p2m_is_valid() verifies if P2M entry is valid.
And in here it is checked if P2M pte is valid from P2M point of view by checking
the type in radix tree and/or in reserved PTEs bits (just to remind we have only 2
free bits for type).
Because this is how it's defined on x86:
#define p2m_is_valid(_t) (p2m_to_mask(_t) & \
(P2M_RAM_TYPES | p2m_to_mask(p2m_mmio_direct)))
I.e. more strict that simply "!= p2m_invalid". And I think such predicates
would better be uniform across architectures, such that in principle they
might also be usable in common code (as we already do with p2m_is_foreign()).
Yeah, Arm isn't so strict in definition of p2m_is_valid() and it seems like
x86 and Arm have different understanding what is valid.
Except what mentioned in the comment that grant types aren't considered valid
for x86 (and shouldn't be the same then for Arm?), it isn't clear why x86's
p2m_is_valid() is stricter then Arm's one and if other arches should be also
so strict.
Arm's p2m_is_valid() is entirely different (and imo misnamed, but arguably one
could also consider x86'es to require a better name). It's a local helper, not
a P2M type checking predicate. With that in mind, you may of course follow
Arm's model, but in the longer run we may need to do something about the name
collision then.
The only use case I can think of is that the caller
might try to map the remaining GFNs again. But that doesn’t seem very useful,
if|p2m_set_entry()| wasn’t able to map the full range, it likely indicates a serious
issue, and retrying would probably result in the same error.
The same applies to rolling back the state. It wouldn’t be difficult to add a local
array to track all modified PTEs and then use it to revert the state if needed.
But again, what would the caller do after the rollback? At this point, it still seems
like the best option is simply to|panic(). |
Basically, I don’t see or understand the cases where knowing how many GFNs were
successfully mapped, or whether a rollback was performed, would really help — because
in most cases, I don’t have a better option than just calling|panic()| at the end.
panic()-ing is of course only a last resort. Anything related to domain handling
would better crash only the domain in question. And even that only if suitable
error handling isn't possible.
And if there is no still any runnable domain available, for example, we are creating
domain and some p2m mapping is called? Will it be enough just ignore to boot this domain?
If yes, then it is enough to return only error code without returning how many GFNs were
mapped or rollbacking as domain won't be ran anyway.
During domain creation all you need to do is return an error. But when you write a
generic function that's also (going to be) used at domain runtime, you need to
consider what to do there in case of partial success.
For example, if I call|map_regions_p2mt()| for an MMIO region described in a device
tree node, and the mapping fails partway through, I’m left with two options: either
ignore the device (if it's not essential for Xen or guest functionality) and continue
booting; in which case I’d need to perform a rollback, and simply knowing the number
of successfully mapped GFNs may not be enough or, more likely, just panic.
Well, no. For example, before even trying to map you could check that the range
of P2M entries covered is all empty.
Could it be that they aren't all empty? Then it seems like we have overlapping and we can't
just do a mapping, right?
Possibly that would simply mean to return an error, yes.
Won't be this procedure consume a lot of time as it is needed to go through each page
tables for each entry.
Well, you're free to suggest a clean alternative without doing so.
I thought about dynamically allocating an array in p2m_set_entry(), where to save all changed PTEs,
and then use it to roll back if __p2m_set_entry() returns rc != 0 ...
_Then_ you know how to correctly roll back.
And yes, doing so may not even require passing back information on how much of
a region was successfully mapped.
If P2M entries were empty before start of the mapping then it is enough to just go
through the same range (sgfn,nr,smfn) and just clean them, right?
Yes, what else would "roll back" mean in that case?
... If we know that the P2M entries were empty, then there's nothing else to be done, just
clean PTE is needed to be done.
However, if the P2M entries weren’t empty (and I’m still not sure whether that’s a legal
case), then rolling back would mean restoring their original state, the state they
had before the P2M mapping procedure started.
~ Oleksii
|
