Re: [Xen-users] Installing Xen on FC3

[David Rhodus <sdrhodus@xxxxxxxxx>]

On Apr 4, 2005 12:37 PM, Tom Brown <tbrown@xxxxxxxxxxxxx> wrote:
> 
> without the output from fdisk -l /dev/hda and maybe df it is hard to know
> anything about how you have your partitions setup... Does the Fedora grub
> option work? That would suffice, assuming they are running out of the same
> partitions.
> 

Yah, the Fedora options work fine for me.

Here is the output you requested.

[root@localhost ~]# fdisk -l /dev/hda

Disk /dev/hda: 20.8 GB, 20847697920 bytes
131 heads, 63 sectors/track, 4933 cylinders
Units = cylinders of 8253 * 512 = 4225536 bytes

   Device Boot      Start         End      Blocks   Id  System
/dev/hda1   *           1          22       88861+  83  Linux
/dev/hda2              22        4934    20267604   8e  Linux LVM
[root@localhost ~]# df
Filesystem           1K-blocks      Used Available Use% Mounted on
/dev/mapper/VolGroup00-LogVol00
                      19642236   3427416  15217036  19% /
/dev/hda1                86042     29919     51680  37% /boot
none                    513440         0    513440   0% /dev/shm
[root@localhost ~]#

> On Mon, 4 Apr 2005, David Rhodus wrote:
> 
> > Ok, I'm resending this question to the users list here now that I
> > notice that the sourceforge list sent me a message back saying it was
> > no longer in use. :-)
> >
> > I downloaded xen-2.0.5-install.tgz and found the few dependency's it
> > needed and was able to successfully run the install.sh script and
> > install everything.
> >
> > Here is what I currently have in my menu.lst/grub.conf file.  I have
> > tried *several* combinations of things but nothing has worked so far.
> > The example listed in the README text file that comes with Xen said to
> > use /boot/xen.tgz etc... but that always returned Error 15: File no
> > Found.  The current file doesn't return an error but the machine very
> > quickly resets.
> >
> > Perhaps someone can share their menu.lst file from a FC3 machine or
> > shed some insight into how to properly configure grub.
> >
> > [root@localhost grub]# cat menu.lst
> > # grub.conf generated by anaconda
> > #
> > # Note that you do not have to rerun grub after making changes to this file
> > # NOTICE:  You have a /boot partition.  This means that
> > #          all kernel and initrd paths are relative to /boot/, eg.
> > #          root (hd0,0)
> > #          kernel /vmlinuz-version ro root=/dev/VolGroup00/LogVol00
> > #          initrd /initrd-version.img
> > #boot=/dev/hda
> > default=0
> > timeout=5
> > splashimage=(hd0,0)/grub/splash.xpm.gz
> > hiddenmenu
> >
> > title Xen 2.0 / XenLinux 2.6.10
> >   root (hd0,0)
> >   kernel /xen.gz dom0_mem=131072 ro console=vga
> >   module /vmlinuz-2.6.10-xen0 ro root=/dev/hda0
> >   module /initrd-2.6.9-1.667.img
> >
> > title Fedora Core (2.6.9-1.667)
> >        root (hd0,0)
> >        kernel /vmlinuz-2.6.9-1.667 ro root=/dev/VolGroup00/LogVol00 rhgb 
> > quiet
> >        initrd /initrd-2.6.9-1.667.img
> >
> > [root@localhost grub]#
> >
> > _______________________________________________
> > Xen-users mailing list
> > Xen-users@xxxxxxxxxxxxxxxxxxx
> > http://lists.xensource.com/xen-users
> >
> 
> ----------------------------------------------------------------------
> tbrown@xxxxxxxxxxxxx   | "The Internet is a world of ends. You're at one
> http://BareMetal.com/  | end, and everybody and everything else are at the
> web hosting since '95  | other ends." - http://www.worldofends.com/
> 
> 


-- 
                                            -David
                                            Steven David Rhodus
                                            <drhodus@xxxxxxxxxxx>

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users