[Xen-users] Plan9 on xen

[Ricardo <djrico@xxxxxxx>]

I went through the instructions on the Bell Labs wiki
(http://www.cs.bell-labs.com/wiki/plan9/Installing_in_Xen/index.html),
and am literally at the last step of the process, where I can create a
new plan9 domain via xm.  However, I get the following:

$ xm create plan9 -c
Using config file "/etc/xen/plan9".
Started domain plan9, console on port 999
************ REMOTE CONSOLE: CTRL-] TO QUIT ********
sdxenverify+0: nr 0
XENFE:find_dev_by_handle 0 np 802833dc np->dev 806e3630
There's still a leak in vif_disconnect
CONNECT: message sent. Set something to 0 just to see
CONNECT: set it
===========> status changed! msg length 12 want 12
===========> blkif_status_change to 1
XENFE:find_dev_by_handle 0 np 802833dc np->dev 806e3630
===========> status changed! msg length 12 want 12
===========> blkif_status_change to 2
===========> evtchn for blkif is 3
====> enable disk interrupt
New packet: 806eb278 8 bytes
0x0: 00 00 00 00 02 be 01 00
end of packet
Pointer is 806f1000
Disk 0 cap 2097152 dev 1792 info 0x20
======> init device 0
capacity is 2097152
=========> controller connected
sdxenverify-0: nr 1
sdxenverify+1: nr 1
sdxenverify-1: nr 1
sdxenverify+2: nr 1
sdxenverify-2: nr 1
sdxenverify+3: nr 1
sdxenverify-3: nr 1
sdxenverify+4: nr 1
sdxenverify-4: nr 1
sdxenverify+5: nr 1
sdxenverify-5: nr 1
sdxenverify+6: nr 1
sdxenverify-6: nr 1
sdxenverify+7: nr 1
sdxenverify-7: nr 1
sdxenverify+8: nr 1
sdxenverify-8: nr 1
sdxenverify+9: nr 1
sdxenverify-9: nr 1
sdxenverify+10: nr 1
sdxenverify-10: nr 1
sdxenverify+11: nr 1
sdxenverify-11: nr 1
sdxenverify+12: nr 1
sdxenverify-12: nr 1
sdxenverify+13: nr 1
sdxenverify-13: nr 1
sdxenverify+14: nr 1
sdxenverify-14: nr 1
sdxenverify+15: nr 1
sdxenverify-15: nr 1
#S/sd00/: part plan9 32 2097152
#S/sd00/: part 9fat 32 204832
#S/sd00/: part nvram 204832 204833
#S/sd00/: part fossil 204833 1892352
#S/sd00/: part swap 1892352 2097152
bad nvram key
bad authentication id
bad authentication domain
authid:

The cursor hangs at the end of the "authid:" line.  Does anyone have a
clue as to what I should do here?

-Ricardo-

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users