[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-users] network-route and vif-route setup help
Ask them if they could give you a set of IPs from the same subnet. It does not have to be a continuous block, but it has to be a set from 82.165.27/24 (or whatever subnet they use). Then you could assign those IPs as alias interfaces to your primary address (on the NIC), set up your domUs with IPs form gray space (eg. 192.168.xxx.yyy) and try to use 1:1 NAT (via iptables in dom0) from those internal addresses to the public ones. Md Mooktakim Ahmed wrote: > Hello, > > I have a dedicated server with 1and1.co.uk. Worst mistake i made. But i've > committed to > this now. > What i have is a dedicated server with centos 4.2 installed. > > I install Xen 3.0 from the redhat installer. it installs fine. I boot into > xen. But i > loose my internet connection. > > It seems 1and1 drops my network whenever the switch sees a MAC address other > then my > eth0's MAC address. So bridge network is not possible. > > I did try network-route and it boots up fine. I still have my internet > connection. But > the problem is my IP's. > > It seems 1and1 won't sell me a subnet of IP's. When i want an ip they will > give me a > random ip. They are not continious range. So thats another problem. > > The problem with network-route is that there is no documentation (atleast i > couldn't > find any). There are some information in the mailing lists. > > What i want is for each domU's to have their own public IP's. i want to > install a > firewall in dom0 and block everything except ssh. > I tried shorewall. > > i can create an alias interface with an IP that i own. > > Since there isn't much howto's on network-route i don't exactly know what > should go in > each domU's configs. I want to specify an IP for each domU. I also want to > set the > gateway. > > my network is a bit strange. My IP is 82.165.27.12 for dom0. but the gateway > is > 10.255.255.1. the netmask is 255.255.255.255. > This works for dom0. > > But when i try to add the default gatway to 10.255.255.1 on one of the domU i > get > network is unreachable. > > I really don't know what to do here. > I would like to be able to run few domU's. > I would appreciate any help. > Thank you. > > > _______________________________________________ > Xen-users mailing list > Xen-users@xxxxxxxxxxxxxxxxxxx > http://lists.xensource.com/xen-users > -- Yuri Pismerov, System Administrator Armor Technologies (Canada) Inc. P: 905 305 1946 (x.3519) http://www.armorware.net Privacy Protection Guaranteed! _______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-users
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |