[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-users] Xen and Zaptel PCI cards on DomU


  • To: xen-users@xxxxxxxxxxxxxxxxxxx
  • From: "David Muench" <davemuench@xxxxxxxxx>
  • Date: Tue, 16 May 2006 19:07:19 -0400
  • Delivery-date: Tue, 16 May 2006 16:07:51 -0700
  • Domainkey-signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; b=KtohAlk8KiO0gEIy2PV2qJTiTbJlM471vxNnGEU73O50QIfIkIWSExB6VSqllZYP4q4XATfXSLY9ic+m5jZxjZ6QkX7mNPEQAb4MRQXlaoyDljppi+5PvBMannnWx44rTaacYeTTSHHhPN25J3H4BswyHENVWK3aWdH/2Lbo02Y=
  • List-id: Xen user discussion <xen-users.lists.xensource.com>

On 5/16/06, Damon Brown <brown078@xxxxxxxxx> wrote:
Hi all,

I have been struggling with the feasibility of adding a zaptel 2 port fxo
PCI card to a vm for a few weeks.  Initially, I installed xen 3.0.2-2
sources and compiled the kernel to include the 1000 HZ timing, which I know
is a requirement for ztdummy and I hope to not use.  What I'm running into
is the basic understanding of how to get zaptel to compile on a DomU.

I have been using Asterisk on Xen for quite some time now, but without
any zaptel hardware - just the zaptel and ztdummy drivers. Last night
I tried to add one of the cheap WCFXO cards, and so far I can't get
the wcfxo driver to detect the card. It is presented to the domU
correctly. I am still using Xen 2.0.7, I haven't had time to try 3.0
yet (and don't have the time to risk destabilizing my setup). Here's
the messages I get:

May 16 09:24:37 uranus kernel: PCI: Obtained IRQ 18 for device 0000:02:04.0
May 16 09:24:37 uranus kernel: FXO PCI Master abort
May 16 09:24:37 uranus last message repeated 36 times
May 16 09:24:37 uranus kernel: Failed to initailize DAA, giving up...
May 16 09:24:37 uranus kernel: FXO PCI Master abort
May 16 09:24:37 uranus kernel: FXO PCI Master abort
May 16 09:24:37 uranus kernel: wcfxo: probe of 0000:02:04.0 failed with error -5
May 16 09:24:37 uranus kernel: Registered tone zone 0 (United States /
North America)

root@uranus:~# lspci -v
0000:02:04.0 Communication controller: Motorola: Unknown device 5608
       Subsystem: Motorola: Unknown device 0000
       Flags: bus master, medium devsel, latency 32, IRQ 18
       I/O ports at c800 [size=256]
       Memory at ff6bf000 (32-bit, non-prefetchable) [size=4K]
       Capabilities: [40] Power Management version 2

If anyone has any ideas, I'd be grateful.

Dave

--
David Muench - davemuench@xxxxxxxxx
Jabber/Google Talk: davemuench@xxxxxxxxx

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.