Re: [Xen-users] Assign IP's

["Kaushal Shriyan" <kaushalshriyan@xxxxxxxxx>]

On 8/7/06, postmaster/info <info@xxxxxxxxxxxxxxx> wrote:
> What kind of error message did you get? And what did you try? Don't forget
> to put a vif = [' '] statement in your xen config file else there won't be a
> nic present in your domU. So please post your xen config file, lspci of domU
> and relevant parts of dmesg are welcome. Please check for typos I spend two
> days grumbling because I copied a typo from a not working example.
>
> Greetings,
>
> Sjoerd de Heer
> S&R Solutions
>
> > -----Oorspronkelijk bericht-----
> > Van: xen-users-bounces@xxxxxxxxxxxxxxxxxxx [mailto:xen-users-
> > bounces@xxxxxxxxxxxxxxxxxxx] Namens Kaushal Shriyan
> > Verzonden: maandag 7 augustus 2006 15:16
> > Aan: xen-users@xxxxxxxxxxxxxxxxxxx
> > Onderwerp: Re: [Xen-users] Assign IP's
> >
> > On 8/7/06, postmaster/info <info@xxxxxxxxxxxxxxx> wrote:
> > > Just like you normally do. /etc/sysconfig/network and
> > > /etc/sysconfig/network-scripts/ifcfg-eth0 Or use dhcp and assign a mac
> > > address in the xen config file for vm02. Browse the list for some
> > examples.
> > >
> > > Sjoerd de Heer
> > > S&R Solutions
> > >
> > > > -----Oorspronkelijk bericht-----
> > > > Van: xen-users-bounces@xxxxxxxxxxxxxxxxxxx [mailto:xen-users-
> > > > bounces@xxxxxxxxxxxxxxxxxxx] Namens Kaushal Shriyan
> > > > Verzonden: maandag 7 augustus 2006 14:43
> > > > Aan: xen-users@xxxxxxxxxxxxxxxxxxx
> > > > Onderwerp: [Xen-users] Assign IP's
> > > >
> > > > Hi ALL
> > > >
> > > > I did it all partition. everything is cool.
> > > > i installed centos too.
> > > > i dont know how to assign ip for my centos let me know the same.
> > > >
> > > > xm list
> > > > Name                              ID Mem(MiB) VCPUs State  Time(s)
> > > > Domain-0                           0      256     1 r-----   123.5
> > > > vm02                              16       96     1 -b----    12.2
> > > >
> > > > Kaushal
> > > >
> > > > _______________________________________________
> > > > Xen-users mailing list
> > > > Xen-users@xxxxxxxxxxxxxxxxxxx
> > > > http://lists.xensource.com/xen-users
> > >
> > >
> > Hi Sjoerd de Heer
> >
> > It didnot worked, can you point me to the exact steps Please
> >
> > Thanks and Regards
> >
> > Kaushal
> >
> > _______________________________________________
> > Xen-users mailing list
> > Xen-users@xxxxxxxxxxxxxxxxxxx
> > http://lists.xensource.com/xen-users
Hi Sjoerd de Heer

How do i set vif in the xen config file

[root@localhost etc]# xm list
Name                              ID Mem(MiB) VCPUs State  Time(s)
Domain-0                           0      256     1 r-----    34.2
vm02                               2       96     1 -b----     5.2


ifconfig
eth0      Link encap:Ethernet  HWaddr 00:16:76:08:17:55
         inet addr:192.168.1.4  Bcast:192.168.1.255  Mask:255.255.255.0
         inet6 addr: fe80::216:76ff:fe08:1755/64 Scope:Link
         UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
         RX packets:2444 errors:0 dropped:0 overruns:0 frame:0
         TX packets:1755 errors:0 dropped:0 overruns:0 carrier:0
         collisions:0 txqueuelen:0
         RX bytes:403081 (393.6 KiB)  TX bytes:159337 (155.6 KiB)

lo        Link encap:Local Loopback
         inet addr:127.0.0.1  Mask:255.0.0.0
         inet6 addr: ::1/128 Scope:Host
         UP LOOPBACK RUNNING  MTU:16436  Metric:1
         RX packets:34 errors:0 dropped:0 overruns:0 frame:0
         TX packets:34 errors:0 dropped:0 overruns:0 carrier:0
         collisions:0 txqueuelen:0
         RX bytes:5034 (4.9 KiB)  TX bytes:5034 (4.9 KiB)

peth0     Link encap:Ethernet  HWaddr FE:FF:FF:FF:FF:FF
         inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
         UP BROADCAST RUNNING NOARP MULTICAST  MTU:1500  Metric:1
         RX packets:2437 errors:0 dropped:0 overruns:0 frame:0
         TX packets:1774 errors:0 dropped:0 overruns:0 carrier:0
         collisions:0 txqueuelen:1000
         RX bytes:403748 (394.2 KiB)  TX bytes:166515 (162.6 KiB)
         Interrupt:20 Base address:0xde00

vif0.0    Link encap:Ethernet  HWaddr FE:FF:FF:FF:FF:FF
         inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
         UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
         RX packets:1755 errors:0 dropped:0 overruns:0 frame:0
         TX packets:2446 errors:0 dropped:0 overruns:0 carrier:0
         collisions:0 txqueuelen:0
         RX bytes:159337 (155.6 KiB)  TX bytes:403249 (393.7 KiB)

xenbr0    Link encap:Ethernet  HWaddr FE:FF:FF:FF:FF:FF
         inet6 addr: fe80::200:ff:fe00:0/64 Scope:Link
         UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
         RX packets:977 errors:0 dropped:0 overruns:0 frame:0
         TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
         collisions:0 txqueuelen:0
         RX bytes:243833 (238.1 KiB)  TX bytes:468 (468.0 b)


CentOS release 4.3 (Final)
Kernel 2.6.16-xen3_86.1_rhel4.1 on an i686

localhost login: root
Password:
Last login: Sun Aug  6 16:26:12 on tty1
-bash-3.00# ls
-bash-3.00# ifconfig
-bash-3.00#

unable to add ip.

Kaushal

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users