Re: [Xen-users] Blank Screen on Boot

[Andrew McGregor <andy@xxxxxxxx>]

Andrew McGregor wrote:
> Hi,
>
> When I boot a Xen kernel either from Debian Etch or FC6 the screen 
> goes blank shortly after loading the kernel.  The system otherwise 
> boots as normal.  Under FC6 X (xorg) then loads and the screen comes 
> back but this hasn't happened with Etch.
> I'm not using the onboard graphics card, instead an dual head matrox 
> PCIe.
> I've tried setting vga=normal in GRUB.
Turns out this problem isn't exclusive to Xen kernels as someone on one 
of the Ubuntu lists has a similar problem.  Even though I can't get a 
display under text mode, X will work.
To try, in no order, are:

* rm /etc/X11/xorg.conf - and let X autoconfigure
* vi /etc/X11/xorg.conf - and use a lower resolution, 800x600, until you 
fix the xorg.conf
* just edit xorg.conf and read the X logs to debug xorg.conf as normal.

So in short it is working by just configuring X properly - still can't 
text mode working ...

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users