Hello,
Kelly,
Ad
1, - no idea, but I would be also interested very much in that question. As far
as I know, You can use another driver in the xen configuration:
Instead
of
vif
= [ 'type=ioemu, mac=aa:00:b0:00:00:11, bridge=xenbr0' ]
use
something like
vif
= [ 'type=ioemu, mac=00:16:3e:00:00:11, bridge=xenbr0, model=ne2k_pci' ]
-
I’ve tested it some weeks ago, but as far as I remember, this reported me
a different HW in Windows, but also only 100MBit...
Ad
2, Following lines in the configuration file
disk
= [ 'file:/xen/vserver/images/vm_w2k3srv.img,hda,w',
'phy:/dev/hda,hdc:cdrom,r',
'phy:/dev/sda1,ioemu:hdd,r' ]
Offered
me windows with 3 disks – first one system disk with windows system,
second one CDROM, third one with the partition, which is NTFS formatted with
some windows data, which are readable (and, this looks strange, but are also
writable, even if I specified the parameter „r“ in the
configuration above – is this OK?).
With
regards,
Archie
From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx [mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx]
On Behalf Of Kelly KKS. SACAULT
Sent: Saturday, April 14, 2007 2:25 AM
To: xen-users@xxxxxxxxxxxxxxxxxxx
Subject: [Xen-users] Eval XEN 3.2 - Provide disk with data for DomU
Importance: High
Hi,
I am very new to
XEN, as to Linux OS too.
Our organization
has about 25 Windows 2003 Servers.
I am willing to
consolidate as many servers as possible. For this project, I have been testing
Xen v3.2 (upgraded from a v3.1) for about 2 months only.
My current test
plateform consist of one PC with C2D cpu, 2 Go RAM, and 1 SATA2 disk. I have
XEN 3.2 running, and 2 VM guest (windows 2003) running also. At this stage, I
would like to submit the 2 “problems” below.
Problem 1 : The
Xen Host has a 1000BT Lan card. Within the VMs, le PV Nics only show 100 Mbps.
Is there any way to have the PV Nics run at 1 Gbps ?
Problem 2 : I
have added a 2nd SATA2 disk already formatted in NTFS and populated
with data. I want at least 1 VM (win2003) to be able to access that disk and
share its content to all Lan clients.
At Xen console
the command ‘fdisk –l’ shows this additional disk. What are
the other steps to have the whole disk shown under a given guest ?
Thanks in
advance,
Kelly SACAULT
IT Manager
French Polynesia
Presidency
__________ Informace od NOD32 2193 (20070416) __________
Tato zprava byla proverena antivirovym systemem NOD32.
http://www.nod32.cz
