Re: [Xen-users] advanced bridging...

[Yevgeniy Goldberg <thegoldberg@xxxxxxx>]

Marc,

I think this design should work well for me.
Please, post the config file that implement it.
Thanks a lot for helping me!


-Eugene
On May 4, 2007, at 2:18 AM, Marc Patino Gómez wrote:

> Hi Yevgeniy,
>
> What do you think about the following scheme? I think is quite  
> simple, I would prefer another scheme a little bit more complex to  
> isolate more. Anyway you can put FW rules at dom0.
> If it this scheme is quite good for you I can post some config files.
>
> Regards,
>
> Marc
>
> Yevgeniy Goldberg wrote:
> > Hi Marc,
> >
> > 1    Yes, my DomU's will be in my private network (10.XX.XX.XX)
> > 2    I'm not worried about the FW at this time, just need to be  
> > able to connect to all my DomU's over 10. network
> > 3    Her is what I need:
> >
> > Dom0 has 2 physical NIC;s - eth0 and eth1
> > my default xenbr0 is bound to eth0, which is on the public network  
> > (Internet)
> > The eth1 of the Dom0 is connected to my 10. private network
> > DomU should be on the 10. provate network as well as any other  
> > unprivileged domains.
> > Dom0 :      xenbr0->eth0->public Internet
> > Dom0:              eth1->10.0.1.4 private network (this way I  
> > could connect to Dom0 from my other                   computers on  
> > the 10.0 network)
> > DomU (1)           eth0(or what-ever is being assigned)->10.0.1.5
> > DomU(2)        eth0(or what-ever is being assigned)->10.0.1.6
> >
> > Please, let me know if more information can be provided.
> > Thank you for helping me!
> >
> > -Eugene
> > On May 3, 2007, at 11:37 AM, Marc Patino Gómez wrote:
> >
> > > Hi Yevgeniy,
> > >
> > > I 'm sure to understand this scenario, some questions:
> > >
> > > 1- your domU's will be in your private network (10.XX.XX.XX) ?
> > > 2- You want your xen box to be a FW of your private net?
> > > 3- Can you post some kind of scheme of your future network ;)
> > >
> > > Regards,
> > >
> > > Yevgeniy Goldberg wrote:
> > > > Hi Marc,
> > > >
> > > > I saw your recommendation and would like to ask your help in  
> > > > binding my DomU network interface to the physical eth1
> > > > I have 2 physical interfaces on my host: eth0 (connected to  
> > > > Internet) and eth1 (connected to my home 10. network)
> > > > I need to be able to have all my DomU to be connected to the  
> > > > eth1 (of whatever its virtual representation may be)
> > > > Any ideas?
> > > >
> > > > Best regards,
> > > >
> > > > -Eugene
> > > > On May 3, 2007, at 10:22 AM, Marc Patino Gómez wrote:
> > > >
> > > > > Hi Ronan,
> > > > >
> > > > > do you want to do something like this (see the image) ?
> > > > >
> > > > > After reading a lot of stuff I made a wrapper of network- 
> > > > > bridge, that I call network-bridge-wrapper, here is it:
> > > > > #!/bin/sh
> > > > > /etc/xen/scripts/network-bridge start bridge=xenbr0 vifnum=0
> > > > > /usr/sbin/brctl addbr xenbr1
> > > > > /sbin/ifconfig xenbr1 up
> > > > >
> > > > > I changed the line in xend-config.sxp that calls, network- 
> > > > > bridge to call network-bridge-wrapper ...
> > > > > If you want I can post more info about this config (my domu  
> > > > > config files, iptables, ebtables....). I'm using Debian, so...  
> > > > > I hope scripts  in CentOS are so close to Debian.
> > > > > Regards,
> > > > >
> > > > > Marc
> > > > >
> > > > >
> > > > > Ronan wrote:
> > > > > > My situation:
> > > > > > Running centos5 on a machine directly connected to internet.
> > > > > > I have a paravirtualised centos5 core machine in domu1 with  
> > > > > > only 1 eth configured eth0 dy dhcp.
> > > > > > What I want:
> > > > > > to configure the dom0 bridge to simply route all traffic at  
> > > > > > ethernet level to dom1(firewall/router) and have dom1 then nat  
> > > > > > if out to my other domu's and machines on my private 192.168  
> > > > > > network using dhcpd configured on eth1 on the machine.
> > > > > > My difficulties:
> > > > > > setting up the dom0 bridging to do what i want ie xenbr0 to  
> > > > > > eth0 on domu1 and then xenbr1 to eth1 on domu1
> > > > > > I then intend to remove / lock dom0 down and only use the  
> > > > > > domu's as dhcp configured servers.
> > > > > > There are a couple of URLs i've looked at
> > > > > > http://lists.xensource.com/archives/html/xen-users/2006-02/ 
> > > > > > msg00602.html
> > > > > > etc but there aren't any specific configuration information.
> > > > > > Can i get some pointers as to where to look, or even example  
> > > > > > configs?
> > > > > > thanks
> > > > > >
> > > > > > Ronan
> > > > > >
> > > > > > (ps if this is the 3rd like message of mine today i apologise,  
> > > > > > I can tell if the other two messages i send actually did...)
> > > > > >
> > > > > > _______________________________________________
> > > > > > Xen-users mailing list
> > > > > > Xen-users@xxxxxxxxxxxxxxxxxxx
> > > > > > http://lists.xensource.com/xen-users
> > > > > <xen.png>
> > > > > _______________________________________________
> > > > > Xen-users mailing list
> > > > > Xen-users@xxxxxxxxxxxxxxxxxxx
> > > > > http://lists.xensource.com/xen-users
> > > >
> > > > _______________________________________________
> > > > Xen-users mailing list
> > > > Xen-users@xxxxxxxxxxxxxxxxxxx
> > > > http://lists.xensource.com/xen-users
> >
> > _______________________________________________
> > Xen-users mailing list
> > Xen-users@xxxxxxxxxxxxxxxxxxx
> > http://lists.xensource.com/xen-users
> <xen2.png>

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users