[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-users] LVM and VMM



I don't think it works to assign partitions on dom0 as partitions on
domU.  I think you have to assign partitions on dom0 as whole block
devices on domU.  So, you'd make an LV on dom0, assign it as hda (or
whatever) in the config file, and then using the OS installer, break
it up into more partitions and LVs.

I use Fedora, and the text only installer doesn't do LVM very well, so
I pre-configure my LV from inside dom0.  Here's how:

(Note: this syntax may not be correct as I'm just running from memory,
but it should point you in the right direction.)

- First make an LV, I'll call it /dev/vg/fred
- Run fdisk /dev/vg/fred and divide into two partitions.  The 1st is 500
  Megs for /boot the 2nd gets the rest of the space
- run kpartx -a /dev/vg/fred to create /dev/mapper/vg-fredp1 and
  /dev/mapper/vg-fredp2
- make /dev/mapper/vg-fredp2 a PV with pvcreate
- make a new vg, I'll call it barney, with /dev/mapper/vg-fred2 as
  it's only member PV.
- create LVs for your domU e.g. lvcreate -n swap -L 1G barney
- deactivate that VG - vgchange -a n barney
- remove /dev/mapper/vg-fredp1 and /dev/mapper/vg-fredp2 by running
  kpartx -d /dev/vg/fred

When you boot the system installer, it should find all those
partitions and LVs.  You must tell it to format each one.

Hope that helps.  

If anyone out there has reason to believe there is a better way to do
this, please let me know!

-Dylan

>    Hi,
> 
>    I am trying to create a DomU under SLES10.1 that uses LVM.
> 
>    I created 3 lv's
>            /dev/vg1//lv-024swap
>            /dev/vg1//lv-024boot
>            /dev/vg1//lv-024root
> 
>    In Virtual Machine Manager (VMM) I try to assign these to a new machine.
>    The best I can get is using each as a disk, not a partition. When I
>    manually edit the config file and put the lines as
> 
>    disk=[ 'phy:vg1/lv-024swap,hda1,w', 'phy:vg1/lv-024boot,hdb1,w',
>    'phy:vg1/lv-024root,hdc1,w', 'phy:/dev/sr0,xvdd,r', ]
>    What is supposed to be in my bootloader and bootargs lines?
> 
>    Any help, or pointing me to a document to read would be appreciated.
> 
>    Thomas King

> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.