[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-users] CentOS 5.0 ifcfg-eth0 gets renamed on boot


  • To: "Xen Users" <xen-users@xxxxxxxxxxxxxxxxxxx>
  • From: "Amos Shapira" <amos.shapira@xxxxxxxxx>
  • Date: Tue, 13 Nov 2007 19:21:51 +1100
  • Delivery-date: Tue, 13 Nov 2007 00:29:35 -0800
  • Domainkey-signature: a=rsa-sha1; c=nofws; d=gmail.com; s=beta; h=received:message-id:date:from:to:subject:mime-version:content-type; b=b5ZmZEajxraJ69qcSAwypeKdkCgyPoyVgBQYcIBqFNj5WpyfjOmepgvxYqgaerdtXl0ANu6o4s7YW1HU5bcIG4JuxS1Pyu9eXIRAaEum+/ob3NTyRvP37Gh1xU8IvAld+no12g+JVXeVrnzXpCX659E9/aBWSPWh/Ll0IitDm2o=
  • List-id: Xen user discussion <xen-users.lists.xensource.com>

Hello,

I created a CentOS 5.0 x86_64 guest under Debian Etch with Xen 3.0.3 and it boots fine except for one re-occuring problem - whenever it boots the /etc/sysconfig/network-scripts/ifcfg-eth0 script gets renamed to .bak and doesn't configure the ethernet device.

Here is the content of this file:

TYPE=Ethernet
DEVICE=eth0
BOOTPROTO=static
>IPADDR=192.168.0.247
NETMASK=255.255.255.0
GATEWAY=192.168.0.2

Looks pretty standard to me.

When I boot the system to single-user mode the file is still there but when I ^D to go to multi-user the file gets renamed at some stage.

A simple "mv ifcfg-eth0.bak ifcfg-eth0" and "service network restart" fixes the problem but it's still very annoying to have to do that every time i reboot the system (luckily these are just test/dev machines for now).

I tried to follow the output of the boot in the console but can't see anything wrong, and can't find what in the world could do this renaming at boot time.

What am I missing?

Thanks,

--Amos

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.