[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-users] CentOS 5.0 ifcfg-eth0 gets renamed on boot
Amos Shapira wrote: Hello,I created a CentOS 5.0 x86_64 guest under Debian Etch with Xen 3.0.3 and it boots fine except for one re-occuring problem - whenever it boots the /etc/sysconfig/network-scripts/ifcfg-eth0 script gets renamed to .bak and doesn't configure the ethernet device.Here is the content of this file: TYPE=Ethernet DEVICE=eth0 BOOTPROTO=static ONBOOT=yes IPADDR=192.168.0.247 <http://192.168.0.247> NETMASK=255.255.255.0 <http://255.255.255.0> GATEWAY=192.168.0.2 <http://192.168.0.2> Looks pretty standard to me.When I boot the system to single-user mode the file is still there but when I ^D to go to multi-user the file gets renamed at some stage.A simple "mv ifcfg-eth0.bak ifcfg-eth0" and "service network restart" fixes the problem but it's still very annoying to have to do that every time i reboot the system (luckily these are just test/dev machines for now).I tried to follow the output of the boot in the console but can't see anything wrong, and can't find what in the world could do this renaming at boot time.What am I missing? Thanks, --Amos Is that http:// debris actually in your file, or is that some sort of gmail rendering error? RedHat also has a tradition of stuffing some interesting little files in /etc/sysconfig/ for resetting network configurations. Slightly different configuration tools, such as system-config-network, set them differently and they propagate oddly if you try editing things manually. Try using system-config-network. Also, don't you have a hard-coded MAC address for the guest? Something that you can put as "HWADDR=<MACADDRESS>" in your ifcfg-eth0 file? _______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-users
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |