Re: [Xen-users] PPPoE in DomU exits with error

[kanour-xen <xen@xxxxxxxxxx>]

kanour-xen wrote:
> [STD]Ein wrote:
> > Here's what I 'can' tell you.
> >
> > My previous setup used Debian Etch as the dom0, pciback to pass a nic 
> > to a
> > domU, and Smoothwall 3.0 firewall distro as the domU.  I used the Xen
> > provided Redhat kernel package for the domU, since Smoothwall is a 
> > fork from
> > old Redhat, and copied the modules from it into the domU.
> >
> > It just worked.  Then, I just recently dist-upgrade'd to Lenny, and
> > installing the Xen 3.1 hypervisor, staying with the existing 3.04 kernels
> > (2.6.18-5-xen-686), and it still works.
> >
> > I suspect your problems lie strictly with pppoe and not Xen, you might 
> > want
> > to try hitting up the Roaring Pengiun forums (do they have a list?) 
> > and see
> > what they can tell you.  Of course, I'm no guru, I just pretend to 
> > know what
> > I'm doing, so take my advice/info with a grain of salt.
> >
> > -----Original Message-----
> > From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
> > [mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of kanour-xen
> > Sent: November 21, 2007 7:37 AM
> > To: Christian Lyra
> > Cc: xen-users@xxxxxxxxxxxxxxxxxxx
> > Subject: Re: [Xen-users] PPPoE in DomU exits with error
> >
> > kanour-xen wrote:
> > > Christian Lyra wrote:
> > > > > > > I am trying to setup my firewall in DomU. However, I have got a
> > > > >  >>> little problem. My *pon dsl-provider *exits with following
> > > > >  >>> message.
> > > > >  > My firewall is a domU too, but it has control of the interface
> > > > >  > connected to the internet, and pppoe works just fine. never tried
> > > > >  > to do this with a bridge...
> > > > >  >
> > > > >  What do you mean by domU has control over the interface?
> > > > I "hide" the interface from dom0 with pciback.hide=(xx:xx.x) in grub 
> > > > and present it to domU with pci = [ 'xx:xx.x' ]. So the domU has 
> > > > control of the real pci device.
> > > I tried that already, but when I included pciback.hide=(xx:xx.x) in 
> > > grub  the card was still present. So, I then unbound it from /sys/...
> > > I included pci =[..... and started domU. It was still the same.
> > >
> > > At this moment I don't know what to do, but I will try to reinstall 
> > > everything and try one more time with Debian Etch xen binary packages.
> > > At this moment I am using Debian Lenny with binary xen from XenSource.
> > >
> > > I am just wondering why the hiding with pciback.hide does not work 
> > > for me?
> > > Jiri
> > >
> > > _______________________________________________
> > > Xen-users mailing list
> > > Xen-users@xxxxxxxxxxxxxxxxxxx
> > > http://lists.xensource.com/xen-users
> > So, I did reinstall everything to Debian Etch. I am running xen from 
> > debian packages. But I just cannot make the pppoe work.
> > Please help!!!
> >
> > I did hide the pci device on the boot. I checked that the driver 
> > (e1000) is not loaded in Dom0.
> > I included pci statement in DomU config file. I checked that the 
> > devide was recognised and driver was loaded in DomU.
> > I have it all on HP DL145 G2 server. There is AMD dual core processor, 
> > 2GB ram, 2x Broadcom network card and I added Intel PCI card in the 
> > raiser board (PCI-X).
> > pppoeconf will discover pppoe on eth2 (intel 1G card) but when it 
> > tries to establish the connection. it fails with:
> >     Nov 18 09:44:40 alsfw01 pppd[1723]: Plugin rp-pppoe.so loaded.
> >     Nov 18 09:44:40 alsfw01 pppd[1723]: Linux kernel does not support
> >     PPPoE -- are you running 2.4.x?
> >
> > Could anyone help me to troubleshoot it.
> > skype: linuxgo
> >
> > Jiri
> >
> > _______________________________________________
> > Xen-users mailing list
> > Xen-users@xxxxxxxxxxxxxxxxxxx
> > http://lists.xensource.com/xen-users
> >
> >
> > _______________________________________________
> > Xen-users mailing list
> > Xen-users@xxxxxxxxxxxxxxxxxxx
> > http://lists.xensource.com/xen-users
> Hi.
>
> Thanks very much for info.I am still working on it because I just cannot 
> figure it out. In dom0 pppoe is working fine. In domU it is not working. 
> Same kernel for both. Same automatic setup through pppoeconf.
> I just don't know...
>
> Jiri
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
I am wondering if the problem could be amd64 kernels?

Jiri

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users