Re: [Xen-users] How do I set this network up?

[Dominik Klein <dk@xxxxxxxxxxxxxxxx>]

> For the sake of example, these ranges are:
>
> 100.100.100.xxx, gateway 100.100.100.94,  netmask 255.255.255.224
> 200.200.200.xxx, gateway 200.200.200.254, netmask 255.255.255.0
>
> And the private range would be:
>
> 10.0.0.xxx
>
> So, the dom0 might be
>
> eth0    100.100.100.123
> eth1    10.0.0.1
>
> And a domU might be
>
> eth0    100.100.100.124
> eth1    10.0.0.2
>
> But it could also be
>
> eth0    200.200.200.46
> eth1    10.0.0.3
>
> or it could be
>
> eth0    (none)
> eth1    10.0.0.4
Imho, in a network-bridge-setup this should not be a problem and work 
right away.
As long as dom0's eth0 is connected to a switch which can reach 
100.100.100.94 and 200.200.200.254
It's might not be the best idea to have two layer 3 networks on one 
layer 2 network, but it should work.
Regards
Dominik

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users