[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-users] domU freezes solid after startup -- why?
Stephan Seitz wrote: > add extra = 'xencons=tty' to the domU config file. Thanks. I tried this, but the domU still freezes up -- though it seems to be freezing at a different place now than it did previously. See the attached console output. This time, it froze on the third line from the end ("Setting the system clock.."); the last two lines of output happened after I did an "xm shutdown" on the domU. In case it matters, I'm trying to run Xen 3.1 on an Ubuntu 7.10 system (kernel = 2.6.22-14-xen). The hardware is an AMD Athlon XP 2700+ with 2 GB of RAM. The dom0 seems to run perfectly. -- Rich Wales === Palo Alto, CA, USA === richw@xxxxxxxxx http://www.richw.org === http://en.wikipedia.org/wiki/User:Richwales [ 0.000000] Linux version 2.6.22-14-xen (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Mon Oct 15 00:35:38 GMT 2007 (Unofficial) [ 0.000000] Reserving virtual address space above 0xf5800000 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: 0000000000000000 - 0000000018800000 (usable) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 392MB LOWMEM available. [155490.986019] Zone PFN ranges: [155490.986021] DMA 0 -> 100352 [155490.986024] Normal 100352 -> 100352 [155490.986026] HighMem 100352 -> 100352 [155490.986028] early_node_map[1] active PFN ranges [155490.986030] 0: 0 -> 100352 [155490.999017] ACPI in unprivileged domain disabled [155490.999594] Allocating PCI resources starting at 20000000 (gap: 18800000:e7800000) [155490.999681] Built 1 zonelists. Total pages: 99568 [155490.999686] Kernel command line: root=/dev/hda1 ro xencons=tty [155490.999916] Enabling fast FPU save and restore... done. [155490.999921] Enabling unmasked SIMD FPU exception support... done. [155490.999925] Initializing CPU#0 [155491.000142] PID hash table entries: 2048 (order: 11, 8192 bytes) [155491.000178] Xen reported: 2162.724 MHz processor. [155491.000210] Console: colour dummy device 80x25 [155491.000568] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [155491.000817] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [155491.000912] Software IO TLB disabled [155491.000920] vmalloc area: d9000000-f53fe000, maxmem 2d800000 [155491.009694] Memory: 364160k/401408k available (2071k kernel code, 28912k reserved, 926k data, 200k init, 0k highmem) [155491.009719] virtual kernel memory layout: [155491.009721] fixmap : 0xf568f000 - 0xf57ff000 (1472 kB) [155491.009722] pkmap : 0xf5400000 - 0xf5600000 (2048 kB) [155491.009723] vmalloc : 0xd9000000 - 0xf53fe000 ( 451 MB) [155491.009725] lowmem : 0xc0000000 - 0xd8800000 ( 392 MB) [155491.009726] .init : 0xc03f3000 - 0xc0425000 ( 200 kB) [155491.009727] .data : 0xc0305cfe - 0xc03ed544 ( 926 kB) [155491.009728] .text : 0xc0100000 - 0xc0305cfe (2071 kB) [155491.009750] Checking if this processor honours the WP bit even in supervisor mode... Ok. [155491.009817] SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [155491.074591] Calibrating delay using timer specific routine.. 4328.06 BogoMIPS (lpj=8656126) [155491.074694] Security Framework v1.0.0 initialized [155491.074724] SELinux: Disabled at boot. [155491.074763] Mount-cache hash table entries: 512 [155491.074945] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [155491.074977] CPU: L2 Cache: 256K (64 bytes/line) [155491.075014] Compat vDSO mapped to f57fe000. [155491.075044] Checking 'hlt' instruction... OK. [155491.075232] SMP alternatives: switching to UP code [155491.075528] Freeing SMP alternatives: 11k freed [155491.075685] Early unpacking initramfs... done [155491.121037] Brought up 1 CPUs [155491.121827] NET: Registered protocol family 16 [155491.123904] Brought up 1 CPUs [155491.123967] PCI: Fatal: No config space access function found [155491.124061] PCI: setting up Xen PCI frontend stub [155491.124660] ACPI: Interpreter disabled. [155491.124715] Linux Plug and Play Support v0.97 (c) Adam Belay [155491.124752] pnp: PnP ACPI: disabled [155491.125287] xen_mem: Initialising balloon driver. [155491.127972] Setting mem allocation to 393216 kiB [155491.128242] PCI: System does not support PCI [155491.128279] PCI: System does not support PCI [155491.128337] NET: Registered protocol family 8 [155491.128363] NET: Registered protocol family 20 [155491.128803] NET: Registered protocol family 2 [155491.128868] Time: xen clocksource has been installed. [155491.156121] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [155491.156192] TCP established hash table entries: 16384 (order: 5, 196608 bytes) [155491.156428] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [155491.156605] TCP: Hash tables configured (established 16384 bind 16384) [155491.156613] TCP reno registered [155491.168226] checking if image is initramfs... it is [155491.237763] Freeing initrd memory: 20260k freed [155491.238261] audit: initializing netlink socket (disabled) [155491.238317] audit(1197904679.706:1): initialized [155491.240468] VFS: Disk quotas dquot_6.5.1 [155491.240626] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [155491.240814] io scheduler noop registered [155491.240848] io scheduler anticipatory registered [155491.240872] io scheduler deadline registered [155491.240909] io scheduler cfq registered (default) [155491.265145] Real Time Clock Driver v1.12ac [155491.265885] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [155491.266153] input: Macintosh mouse button emulation as /class/input/input0 [155491.273761] Xen virtual console successfully installed as tty1 [155491.273980] Event-channel device installed. [155491.297856] netfront: Initialising virtual ethernet driver. [155491.299636] xen-vbd: registered block device major 3 [155491.299730] blkfront: hda1: barriers enabled [155491.301153] blkfront: hda2: barriers enabled [155491.303956] PNP: No PS/2 controller found. Probing ports directly. [155491.304789] i8042.c: No controller found. [155491.304917] mice: PS/2 mouse device common for all mice [155491.305076] TCP cubic registered [155491.305090] NET: Registered protocol family 1 [155491.305115] Using IPI No-Shortcut mode [155491.306601] netfront: device eth0 has copying receive path. [155491.400062] XENBUS: Device with no driver: device/console/0 [155491.400281] Freeing unused kernel memory: 200k freed Loading, please wait... Couldnt get a file descriptor referring to the console Couldnt get a file descriptor referring to the console Couldnt get a file descriptor referring to the console Couldnt get a file descriptor referring to the console Couldnt get a file descriptor referring to the console Couldnt get a file descriptor referring to the console Begin: Loading essential drivers... ... [155491.789846] AppArmor: AppArmor initialized<5>audit(1197904680.258:2): type=1505 info="AppArmor initialized" pid=1034 [155491.802293] fuse init (API version 7.8) [155491.811574] Failure registering capabilities with primary security module. [155491.860760] thermal: Unknown symbol acpi_processor_set_thermal_limit [155491.879244] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@xxxxxxxxxx Done. Begin: Running /scripts/init-premount ... Done. Begin: Mounting root file system... ... Begin: Running /scripts/local-top ... Done. Begin: Running /scripts/local-premount ... Done. [155492.295156] EXT3-fs: INFO: recovery required on readonly filesystem. [155492.295314] EXT3-fs: write access will be enabled during recovery. [155492.374220] kjournald starting. Commit interval 5 seconds [155492.374390] EXT3-fs: recovery complete. [155492.393933] EXT3-fs: mounted filesystem with ordered data mode. Begin: Running /scripts/local-bottom ... Done. Done. Begin: Running /scripts/init-bottom ... Done. [155492.726721] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled INIT: version 2.86 booting * Mount point '/dev/shm' does not exist. Skipping mount. Activating swap...[155493.323779] Adding 1048568k swap on /dev/hda2. Priority:-1 extents:1 across:1048568k done. Checking root file system...fsck 1.40-WIP (14-Nov-2006) /dev/hda1: clean, 10879/2621440 files, 190639/5242880 blocks done. [155493.444805] EXT3 FS on hda1, internal journal Setting the system clock.. [160462.553932] xenbus_dev_shutdown: device/console/0: Initialising != Connected, skipping [160462.559269] System halted. _______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-users
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |