[Xen-users] dom0 - tar: Skipping to next header

[Holm Kapschitzki <holm@xxxxxxxxxx>]

I setup Xen 3.1 on a etch 32 bit box with amd64. I compile the standard 
Kernel from Xen and on the other way the gentoo 2.6.20 for both dom0 
uand domU. The Xen Setup was bridged. But if i download a tar file, i 
cant extract it cause of the following error:
09:48:35 (8.66 MB/s) - `xxx.tar.gz' saved [64985129/64985129]

tar: Skipping to next header

gzip: stdin: invalid compressed data--crc error

gzip: stdin: invalid compressed data--length error
tar: Child returned status 1
tar: Error exit delayed from previous errors
150+0 records in
150+0 records out
157286400 bytes (157 MB) copied, 5.34076 seconds, 29.5 MB/s

So if i mount the image there are only some files cause of the extract 
error.
For first i changed a lot of hardware but same models but that isnt, i 
think. There are absolutly no things i can read in the logs or dmsg.
On an other setup with etch 64 bit taking the standard kernel - the same 
thing. It only works for now with etch 64 bit and gentoo 2.6.20 xen 
Kernel. There are no "extract" mistakes.
But i have to find a solution at this 32 bit debian etch box with 2.6.18 
or 2.6.20 kernel.
The Hardware are compiled in Kernel. Just IPtables are Modules. Some 
intakt DomUs are booting well.
Here are some data:

lsmod in dom0

 lsmod
Module                  Size  Used by
xt_comment              6016  26
xt_physdev              7312  0
iptable_filter          7296  1
ip_tables              18244  1 iptable_filter
x_tables               18692  3 xt_comment,xt_physdev,ip_tables
bridge                 60060  1 xt_physdev

lspci

lspci
00:00.0 Host bridge: ATI Technologies Inc Unknown device 7910
00:01.0 PCI bridge: ATI Technologies Inc Unknown device 7912
00:07.0 PCI bridge: ATI Technologies Inc Unknown device 7917
00:12.0 IDE interface: ATI Technologies Inc SB600 Non-Raid-5 SATA
00:13.0 USB Controller: ATI Technologies Inc SB600 USB (OHCI0)
00:13.1 USB Controller: ATI Technologies Inc SB600 USB (OHCI1)
00:13.2 USB Controller: ATI Technologies Inc SB600 USB (OHCI2)
00:13.3 USB Controller: ATI Technologies Inc SB600 USB (OHCI3)
00:13.4 USB Controller: ATI Technologies Inc SB600 USB (OHCI4)
00:13.5 USB Controller: ATI Technologies Inc SB600 USB Controller (EHCI)
00:14.0 SMBus: ATI Technologies Inc SB600 SMBus (rev 14)
00:14.1 IDE interface: ATI Technologies Inc SB600 IDE
00:14.3 ISA bridge: ATI Technologies Inc SB600 PCI to LPC Bridge
00:14.4 PCI bridge: ATI Technologies Inc SB600 PCI to PCI Bridge
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] 
HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] 
Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] 
DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] 
Miscellaneous Control
01:05.0 VGA compatible controller: ATI Technologies Inc Unknown device 791e
01:05.2 Audio device: ATI Technologies Inc Unknown device 7919
03:02.0 Ethernet controller: Intel Corporation 82557/8/9 [Ethernet Pro 
100] (rev 08)
03:03.0 RAID bus controller: 3ware Inc 7xxx/8xxx-series PATA/SATA-RAID 
(rev 01)
kernel conf

#
# Processor type and features
#
CONFIG_SMP=y
# CONFIG_X86_PC is not set
CONFIG_X86_XEN=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
CONFIG_M686=y
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_PPRO_FENCE=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_NR_CPUS=32
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_BKL=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
CONFIG_MICROCODE=y
CONFIG_X86_CPUID=m
CONFIG_SWIOTLB=y


#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
# CONFIG_PCI_GOXEN_FE is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_XEN_PCIDEV_FRONTEND=y
# CONFIG_XEN_PCIDEV_FE_DEBUG is not set
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_DEBUG is not set
CONFIG_ISA_DMA_API=y
CONFIG_SCx200=m
CONFIG_K8_NB=y


#
# Hardware crypto devices
#
# CONFIG_CRYPTO_DEV_PADLOCK is not set
CONFIG_XEN=y
CONFIG_XEN_INTERFACE_VERSION=0x00030205

#
# XEN
#
CONFIG_XEN_PRIVILEGED_GUEST=y
# CONFIG_XEN_UNPRIVILEGED_GUEST is not set
CONFIG_XEN_PRIVCMD=y
CONFIG_XEN_XENBUS_DEV=y
CONFIG_XEN_BACKEND=y
CONFIG_XEN_BLKDEV_BACKEND=y
CONFIG_XEN_BLKDEV_TAP=y
CONFIG_XEN_NETDEV_BACKEND=y
# CONFIG_XEN_NETDEV_PIPELINED_TRANSMITTER is not set
CONFIG_XEN_NETDEV_LOOPBACK=y
CONFIG_XEN_PCIDEV_BACKEND=m
CONFIG_XEN_PCIDEV_BACKEND_VPCI=y
# CONFIG_XEN_PCIDEV_BACKEND_PASS is not set
# CONFIG_XEN_PCIDEV_BACKEND_SLOT is not set
# CONFIG_XEN_PCIDEV_BE_DEBUG is not set
CONFIG_XEN_TPMDEV_BACKEND=m
CONFIG_XEN_BLKDEV_FRONTEND=y
CONFIG_XEN_NETDEV_FRONTEND=y
CONFIG_XEN_FRAMEBUFFER=y
CONFIG_XEN_KEYBOARD=y
CONFIG_XEN_SCRUB_PAGES=y
CONFIG_XEN_DISABLE_SERIAL=y
CONFIG_XEN_SYSFS=y
CONFIG_XEN_COMPAT_030002_AND_LATER=y
# CONFIG_XEN_COMPAT_030004_AND_LATER is not set
# CONFIG_XEN_COMPAT_LATEST_ONLY is not set
CONFIG_XEN_COMPAT=0x030002
CONFIG_HAVE_IRQ_IGNORE_UNHANDLED=y
CONFIG_NO_IDLE_HZ=y
CONFIG_XEN_SMPBOOT=y

Greets Holm

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users