[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-users] Can't install Windows 2003 on SLES10SP1



Hi Dustin,

I don't think this is possible.
You can't even read a hvm guests sparse disk file using tap:aio, with cfdisk when it's ext3 formatted.
Or am I wrong?

Cheers,

Alex


Dustin Henning schrieb:
        Even if you couldn't create a sparse file formatted with ntfs
directly from dd (which doesn't sound plausible), couldn't you create the
sparse file, partition it, and then format the appropriate partition with
mkfs.ntfs (after making the file accessible in /dev with whatever tools are
necessary on a given distro)?  This still might not cut it, though, because
Server2003 might be as picky about the formatting as XP SP1+ (prior to XP
SP1 or SP2, I always used 8-64K clusters on my Windows partition, after
that, I had to use the default ntfs format [512 byte clusters?] or Windows
couldn't boot).
        Dustin

-----Original Message-----
From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
[mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of Alexander
Hoßdorf
Sent: Tuesday, July 15, 2008 07:26
To: James Pifer; xen-users@xxxxxxxxxxxxxxxxxxx
Subject: Re: [Xen-users] Can't install Windows 2003 on SLES10SP1

James Pifer schrieb:
By the way, don't use sparse files if you don't have to.
Why not use sparse files?

Looked like SLES 10 SP1 as the dom0 OS, and the version of Xen there
would be 3.1 I believe (or maybe a 3.0.x variant). SLES 10 SP2 has Xen
3.2.
Yes, SLES 10 SP1. xen version is actually 3.0.4.

The format should complete and then the initial file copy for Windows
begin (enough to set up the actual graphical part of the Windows
installation). Are you saying you consistently don't get this initial
file copy to occur? Is it an unexpected reboot of domU, or are you
prompted to do it?
Correct, at the point it should start copying files the domU reboots, by
itself.

In addition to not using sparse files (again shouldn't really affect
things too much) I'd also suggest setting dom0 memory to a low value.
What's the overall RAM in the system? setting dom0 down to 512M should
be fine: xm mem-set domain0 512 for example...

I do have memory restricted for dom0 on my production servers, which
have anywhere from 8 to 16 gig of RAM. I have not limited on this
machine yet, which has 4 gig of ram.
I have also tried using an ISO for the install instead of the CD and it
does the exact same thing.
I could install SP2 and see if that makes a difference. Anyone know the
commands to create a sparse file pre-formatted to ntfs using dd? Time to
google I guess.
Thanks,
James


_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

__________ Hinweis von ESET NOD32 Antivirus, Signaturdatenbank-Version
3268 (20080715) __________
E-Mail wurde geprüft mit ESET NOD32 Antivirus.

http://www.eset.com




#I could install SP2 and see if that makes a difference. Anyone know the
#commands to create a sparse file pre-formatted to ntfs using dd? Time to
#google I guess.


Hi James,

I don't think it's possible to format a sparse file natively with ntfs under linux.
But maybe I'm wrong.

But if you think this helps,
I can send you a ntfs fomatted sparse file.
Just let me know the size.



Regards,

Alex


_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users



_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

__________ Hinweis von ESET NOD32 Antivirus, Signaturdatenbank-Version 3269 
(20080715) __________

E-Mail wurde geprüft mit ESET NOD32 Antivirus.

http://www.eset.com





_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.