Re: [Xen-users] Private vlans for guests

[Tim Post <echo@xxxxxxxxxxxx>]

Hi all,

Sorry, forgot to mention. All guests are assigned a static, unique MAC
address when created.

Cheers,
--Tim

On Fri, 2008-09-19 at 14:57 +0800, Tim Post wrote:
> Hello to all,
> 
> I have 6 xen-0 hosts that have two nics each. On all hosts, eth0 is
> enslaved to the primary bridge and is connected to the public switch.
> 
> eth1 is enslaved to a private bridge and is connected to a private
> switch.
> 
> What I hope to accomplish is providing every dom-u with two network
> interfaces, one public, one private. On the farm, there are 6 users,
> each one has about 12 guests running.
> 
> What I would like to do is assign user "sam" a private /24, say
> 192.168.2.0/24 to connect his guests via LAN. I'd like to assign "sue"
> 192.168.3.0/24.
> 
> I don't want sam to be able to reach sue's network, or sue to reach
> sam's.
> 
> I haven't had much luck with google in finding a way to accomplish this,
> does anyone have any pointers? The private switch is just a brain dead
> gig-e switch. Somehow I was thinking I could accomplish this with
> ebtables, however I'm not so sure.
> 
> I was also looking at using a routed config for eth1, while keeping eth0
> bridged, but I'm also unsure of that.
> 
> Thanks in advance, I'm rather stuck.
> 
> Cheers,
> --Tim
> 
> 
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users


_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users