Re: [Xen-users] Private vlans for guests

[Ferenc Wagner <wferi@xxxxxxx>]

Tim Post <echo@xxxxxxxxxxxx> writes:

> I have 6 xen-0 hosts that have two nics each. On all hosts, eth0 is
> enslaved to the primary bridge and is connected to the public switch.
>
> eth1 is enslaved to a private bridge and is connected to a private
> switch.
>
> What I hope to accomplish is providing every dom-u with two network
> interfaces, one public, one private. On the farm, there are 6 users,
> each one has about 12 guests running.
>
> What I would like to do is assign user "sam" a private /24, say
> 192.168.2.0/24 to connect his guests via LAN. I'd like to assign "sue"
> 192.168.3.0/24.
>
> I don't want sam to be able to reach sue's network, or sue to reach
> sam's.

Why don't you create separate bridges for each user, and connect them
amongst the dom0-s by separate vlans?

> Somehow I was thinking I could accomplish this with ebtables,

Yes you can, if you prefer, but the above is easier IMO.
-- 
Regards,
Feri.

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users