[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-users] Networking problems on opensuse 10.3



Hi, 

I am still stuck with the network problem.
I searched the archive of maling list and found an user has the same problem.
http://lists.xensource.com/archives/html/xen-users/2007-08/msg00839.html
And the reply suggests to execute "ethtool -K eth0 tx off "
When I executed it, nothing happens. Should I execute this command at boot time?
How can I do that?
So I didn't get the answer from that thread.
Here is my output of ifconfig:

eth0      Link encap:Ethernet  HWaddr 00:30:48:63:72:76
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:9624 errors:0 dropped:0 overruns:0 frame:0
          TX packets:4042 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:3466249 (3.3 Mb)  TX bytes:799201 (780.4 Kb)
          Base address:0x2000 Memory:d8020000-d8040000

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:150 errors:0 dropped:0 overruns:0 frame:0
          TX packets:150 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:10904 (10.6 Kb)  TX bytes:10904 (10.6 Kb)

xenbr0    Link encap:Ethernet  HWaddr 00:30:48:63:72:76
          inet addr:143.215.206.12  Bcast:143.215.207.255  Mask:25Actually, I 
want to make domains can communicate with each other, suck like uploading files 
to another domain. I really don't know how to achieve this without 
bridging.5.255.252.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:5626 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2024 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0Actually, I want to make domains can 
communicate with each other, suck like uploading files to another domain. I 
really don't know how to achieve this without bridging.
          RX bytes:1621821 (1.5 Mb)  TX bytes:399985 (390.6 Kb)

As you can see, no peth0 and vif0.0.

The output of brctl show
bridge name     bridge id               STP enabled     interfaces
xenbr0          8000.003048637276       no              eth0

No vif interface.

Does anyone have the same problem? 
This problem is quite annoying.
Actually, I want to make domains can communicate with each other, suck like 
uploading files from Dom 0 to Dom 1. I really don't know how to achieve this 
without bridging.
If you have any workaround solution, please kindly let me know.
I have to use opensuse 10.3 with xen. No other limitations.
Any response is appreciated. Thanks again.
_________________________________________________________________
Want to do more with Windows Live? Learn “10 hidden secrets” from Jamie.
http://windowslive.com/connect/post/jamiethomson.spaces.live.com-Blog-cns!550F681DAD532637!5295.entry?ocid=TXT_TAGLM_WL_domore_092008
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.