[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-users] MAC Address for GPL PV network card


  • To: "Nemeth, Tamas" <nice@xxxxxxxxxxxxxxx>
  • From: "Thiago Camargo Martins Cordeiro" <thiagocmartinsc@xxxxxxxxx>
  • Date: Fri, 26 Sep 2008 18:20:52 -0300
  • Cc: Bogdan Rudas <brudas@xxxxxxxxxxx>, xen-users@xxxxxxxxxxxxxxxxxxx
  • Delivery-date: Fri, 26 Sep 2008 14:21:43 -0700
  • Domainkey-signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=message-id:date:from:to:subject:cc:in-reply-to:mime-version :content-type:references; b=R/cyRNs8OCHiUYBTJkS5VRep6v0opsyV2skxUoi7hOWOjUozZyPaHs5iNCYzK1W101 nW6QwJsWdfoLKBAv199sy5sExZSUs+r7t3Ub5or0alGY0C0N7pw6yK8GfrrtL2Svv/Gw 03p/IxG3b7YGJlvm8eKfd/SzQRwt+NEhXX2Mw=
  • List-id: Xen user discussion <xen-users.lists.xensource.com>

You must try hvm-stubdom for your virtualized Windows! It's much more fast!   ;-)

Regards,
Thiago

2008/9/26 Nemeth, Tamas <nice@xxxxxxxxxxxxxxx>
I tested several versions gplvp today on xen 3.2.1 and xen 3.3.0, with
w2k3 and windows xp, but I experienced BSODs constantly in everi
scenario. I don't want to use it anymore, I only miss the shutdown
feature. I haven't ever tried stubdom.

Regards

Tamas

2008. 09. 26, pÃntek keltezÃssel 16.14-kor Thiago Camargo Martins
Cordeiro ezt Ãrta:
> Nemeth,
>
>  Have you tested GPL PV with Xen-3.3 and your Windows 2k3 in a HVM
> stubdomain?
>
>  What is the best to virtualize Windows in Xen-3.3, normal HVM with
> GPL PV drivers or Xen-3.3 HVM Stubdom without GPL PL?
>
> Thiago
>
> 2008/9/26 Nemeth, Tamas <nice@xxxxxxxxxxxxxxx>
>
>
>         > Because I follow the guide:
>         > http://wiki.xensource.com/xenwiki/XenWindowsGplPv
>         > which say's:
>         >
>         >
>         >
>         > In your machine configuration, make sure you don't use the
>         ioemu
>         > network driver. Instead, use a line like:
>         >
>         >  vif = ['']
>
>         OK, ïI've already said that I think they only want to explain
>         that you
>         have to omit the "type=ioemu" and ï"model=rtl8139/ne2k_pci"
>         directives,
>         in order to turn that virtual NIC into a paravirtualized one
>         instead of
>         a fully virtualized. I've tested it on xen 3.3.0 and Windows
>         2k3
>         enterprise with Xen PV Drivers 0.9.11-pre17, and it works! The
>         MAC
>         address of the virtual card is exactly the same I set to.
>         Here's the
>         config:
>
>         name="vw-storman2"
>         uuid="7b77d277-e99a-e25b-3652-61e936f78abb"
>         memory=1024
>         vcpus=1
>         > >         > >         > >         > >         > >         localtime=1
>         timer_mode=1
>
>         builder="hvm"
>         device_model="/usr/lib/xen/bin/qemu-dm"
>         kernel="/usr/lib/xen/boot/hvmloader"
>         boot="c"
>         disk=[ 'phy:/dev/mapper/vw-storman2,hda,w' ]
>         vif=[ 'mac=00:16:3e:0b:e9:5a,bridge=eth0', ]
>         #
>         vif=[ 'mac=00:16:3e:0b:e9:5a,model=rtl8139,type=ioemu,bridge=eth0', ]
>         keymap="hu"
>         stdvga=0
>         vnc=1
>         vncunused=0
>         vncdisplay=27
>         apic=1
>         acpi=1
>         pae=1
>
>         usb=1
>         usbdevice='tablet'
>
>         serial="pty"
>
>
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users


_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.