Re: [Xen-users] Problem starting stubdomU

[James Miller <jimm@xxxxxxxxxxxxxxx>]

Boris Derzhavets wrote:

--- On Mon, 9/29/08, James Miller <jimm@xxxxxxxxxxxxxxx> wrote:

From: James Miller <jimm@xxxxxxxxxxxxxxx>
Subject: [Xen-users] Problem starting stubdomU
To: "xen-users" <xen-users@xxxxxxxxxxxxxxxxxxx>
Date: Monday, September 29, 2008, 11:30 AM

Hello everyone,

I have a Debian Lenny server running Xen 3.3 compiled from source.  I'm 
trying to start up a stubdomU and getting the error "VmError: (14,
'Bad 
address')". 

I'm assuming the error in in the vif statement.  I've tried a few 
variations of the vif line including just commenting it out but none if 
that's working.

I would appreciate it if some of you more familiar with using stubdoms 
would take a look at my
 config and let me know if I'm missing anything:
----------------------------------------
name = 'w2003web_template.vm'
kernel = '/usr/lib/xen/boot/ioemu-stubdom.gz'
builder='hvm'
boot='dca'
memory = 2048
# vif = [ 'ip=209.1x.2xx.4x', 'ip=209.1x.2xx.5x' ]
vif = [ '', '' ]
*****************************************************************************************************************************
It worked for me on Xen 3.3 CentOS 5.2 Dom0 :-

vif= [' ','bridge=xenbr0']

http://bderzhavets.wordpress.com/2008/09/27/getting-stubdom-working-on-xen-33-port-via-httpwwwgitcoderepoxen330-to-centos-52/
*****************************************************************************************************************************

device_model = '/usr/lib/xen/bin/stubdom-dm'
# vnc=0
#sdl=0
# opengl=0
cpus = ["1", "2"] # VCPU0 runs on CPU1 and VCPU1 runs on
CPU2
vcpus = "2"
disk = [
 'file:/win_iso_images/w2003web.iso,hdc:cdrom,r', 
'phy:/dev/vg01/w2003web_template,hda,w' ]
acpi=1
vfb = [ 'type=vnc' ]


Thank you,
Jim


          

Thanks for the suggestion Boris, I've read that article a few times looking to see if I missed anything.  I did notice when I use I tried putting in a space between the the quotes in the first part of the vif line but that didn't make a difference. 

Also, the bridge, at least for me, is now eth0 instead of xenbr0. 

One thing I did notice, when I try to use sdl instead of vnc:
vbf  = [ 'type=sdl' ]
# vbf  = [ 'type=vnc' ]

I get a xmlrpclib2 error in xend.log.  All I see at the console is:
Error:

I'm not very good a interpolating the messages in xend.log.  Is there an known issues?  I'd be glad to send along log snippets if it would help.

Jim

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users