[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-users] Intel processor model 30 for P6 class family is not supported


  • To: "xen-users@xxxxxxxxxxxxxxxxxxx" <xen-users@xxxxxxxxxxxxxxxxxxx>
  • From: "Nguyen, Daniel" <Daniel.Nguyen@xxxxxxx>
  • Date: Tue, 2 Jun 2009 18:17:55 -0600
  • Accept-language: en-US
  • Acceptlanguage: en-US
  • Delivery-date: Tue, 02 Jun 2009 17:18:44 -0700
  • List-id: Xen user discussion <xen-users.lists.xensource.com>
  • Thread-index: AQHJ4+C+DxN/u9Mg8EuXcamBN4AUxQ==
  • Thread-topic: Intel processor model 30 for P6 class family is not supported

We have installed Xen version 3.3.1 on CentOS 5.2 32-bit, which runs on a
testbed that has the Intel Jasper Forest processor. When we perform xm dmesg,
we get the following message:

(XEN) xenoprof: Initialization failed. Intel processor model 30 for P6 class
family is not supported

Since this processor has not yet been released, this may explain the
aforementioned message. But we would like to know whether this has any negative
impact on Xen itself(performance, vt-d, etc.) if Xen detects an unknown
processor model like the Jasper Forest. Or is it just informational? 

-------------------------------------------
The following is the complete dmesg output:

(XEN) ERROR: 16550-compatible serial UART not present
(XEN) Bad console= option 'com1'
__ __ _____ _____ _
\ \/ /___ _ __ |___ / |___ / / |
\ // _ \ '_ \ |_ \ |_ \ | |
/ \ __/ | | | ___) | ___) || |
/_/\_\___|_| |_| |____(_)____(_)_|

(XEN) Xen version 3.3.1 (root@) (gcc version 4.1.2 20071124 (Red Hat 4.1.2-42))
Wed May 6 06:06:21 EDT 2009
(XEN) Latest ChangeSet: 8417ddc981b4.d3199736facb (3.3.1 5.1.0.354.18669)
(XEN) Command line: acpi=force apic=on vtd=1 iommu=1 com1=115200,8n1
console=com1
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds
(XEN) EDID info not retrieved because no DDC retrieval method detected
(XEN) Disc information:
(XEN) Found 2 MBR signatures
(XEN) Found 2 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009ec00 (usable)
(XEN) 000000000009ec00 - 00000000000a0000 (reserved)
(XEN) 00000000000e0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 000000003f3c5000 (usable)
(XEN) 000000003f3c5000 - 000000003f3eb000 (ACPI NVS)
(XEN) 000000003f3eb000 - 000000003f42b000 (reserved)
(XEN) 000000003f42b000 - 000000003f435000 (ACPI data)
(XEN) 000000003f435000 - 000000003f43f000 (ACPI NVS)
(XEN) 000000003f43f000 - 000000003f464000 (reserved)
(XEN) 000000003f464000 - 000000003f667000 (ACPI NVS)
(XEN) 000000003f667000 - 000000003f800000 (usable)
(XEN) 000000003f800000 - 0000000040000000 (reserved)
(XEN) 00000000c0000000 - 00000000d0000000 (reserved)
(XEN) 00000000fed1c000 - 00000000fed20000 (reserved)
(XEN) 00000000ff000000 - 0000000100000000 (reserved)
(XEN) System RAM: 1012MB (1037296kB)
(XEN) ACPI: RSDP 000F03C0, 0024 (r2 ALASKA)
(XEN) ACPI: XSDT 3F433E18, 0044 (r1 ALASKA A M I 6222004 MSFT 10013)
(XEN) ACPI: FACP 3F432D98, 00F4 (r4 ALASKA A M I 6222004 MSFT 10013)
(XEN) ACPI: DSDT 3F42B018, 6201 (r1 ALASKA A M I 0 INTL 20051117)
(XEN) ACPI: FACS 3F43CD40, 0040
(XEN) ACPI: APIC 3F432F18, 00CC (r2 ALASKA A M I 6222004 MSFT 10013)
(XEN) ACPI: MCFG 3F434F18, 003C (r1 A M I OEMMCFG 6222004 MSFT 97)
(XEN) ACPI: HPET 3F434E98, 0038 (r1 ALASKA A M I 6222004 AMI. 3)
(XEN) Xen heap: 14MB (14700kB)
(XEN) Domain heap initialised
(XEN) Processor #0 7:14 APIC version 21
(XEN) Processor #1 7:14 APIC version 21
(XEN) Processor #2 7:14 APIC version 21
(XEN) Processor #3 7:14 APIC version 21
(XEN) Processor #4 7:14 APIC version 21
(XEN) Processor #5 7:14 APIC version 21
(XEN) Processor #6 7:14 APIC version 21
(XEN) Processor #7 7:14 APIC version 21
(XEN) IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
(XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 2660.036 MHz processor.
(XEN) VMX: EPT is available.
(XEN) VMX: VPID is available.
(XEN) HVM: VMX enabled
(XEN) HVM: Hardware Assisted Paging detected and enabled.
(XEN) CPU0: Intel(R) Xeon(R) CPU 000 @ 2.67GHz stepping 02
(XEN) Booting processor 1/1 eip 8c000
(XEN) CPU1: Intel(R) Xeon(R) CPU 000 @ 2.67GHz stepping 02
(XEN) Booting processor 2/2 eip 8c000
(XEN) CPU2: Intel(R) Xeon(R) CPU 000 @ 2.67GHz stepping 02
(XEN) Booting processor 3/3 eip 8c000
(XEN) CPU3: Intel(R) Xeon(R) CPU 000 @ 2.67GHz stepping 02
(XEN) Booting processor 4/4 eip 8c000
(XEN) CPU4: Intel(R) Xeon(R) CPU 000 @ 2.67GHz stepping 02
(XEN) Booting processor 5/5 eip 8c000
(XEN) CPU5: Intel(R) Xeon(R) CPU 000 @ 2.67GHz stepping 02
(XEN) Booting processor 6/6 eip 8c000
(XEN) CPU6: Intel(R) Xeon(R) CPU 000 @ 2.67GHz stepping 02
(XEN) Booting processor 7/7 eip 8c000
(XEN) CPU7: Intel(R) Xeon(R) CPU 000 @ 2.67GHz stepping 02
(XEN) Total of 8 processors activated.
(XEN) Testing NMI watchdog --- CPU#0 stuck. CPU#1 stuck. CPU#2 stuck. CPU#3
stuck. CPU#4 stuck. CPU#5 stuck. CPU#6 stuck. CPU#7 stuck.
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) checking TSC synchronization across 8 CPUs: passed.
(XEN) Platform timer is 14.318MHz HPET
(XEN) Brought up 8 CPUs
(XEN) I/O virtualisation disabled
(XEN) mtrr: your CPUs had inconsistent fixed MTRR settings
(XEN) xenoprof: Initialization failed. Intel processor model 30 for P6 class
family is not supported
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 32-bit, PAE, lsb, paddr 0xc0100000 -> 0xc0513000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 000000003b000000->000000003c000000 (188624 pages to be
allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: 00000000c0100000->00000000c0513000
(XEN) Init. ramdisk: 00000000c0513000->00000000c0c82800
(XEN) Phys-Mach map: 00000000c0c83000->00000000c0d3f340
(XEN) Start info: 00000000c0d40000->00000000c0d404a4
(XEN) Page tables: 00000000c0d41000->00000000c0d4f000
(XEN) Boot stack: 00000000c0d4f000->00000000c0d50000
(XEN) TOTAL: 00000000c0000000->00000000c1000000
(XEN) ENTRY ADDRESS: 00000000c0100000
(XEN) Dom0 has maximum 8 VCPUs
(XEN) Scrubbing Free RAM: ...done.
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: Errors and warnings
(XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to
Xen)
(XEN) Freed 104kB init memory.
(XEN) __csched_vcpu_acct_start: setting dom 0 as the privileged domain
(XEN) event_channel.c:195:d0 EVTCHNOP failure: domain 0, error -22

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.