[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: AW: AW: [Xen-users] XEN 3.4 - Problems with eth0 (link down)
Hi,I've tried a new r8169.c file out from the kernels.org and put them into the right folders. After making a "make kernels" the compilation stops at this file.So I think the complete files which are used by xen needs to be adapted in any case. Otherwise it would be very easy to use a complete new kernel.We need to add the newer revisions to the existing xen-patched r8169.c file. What for a version of XEN are you using? Which Realtek are you using? Cheers, Maik On Jun 10, 2009, at 3:01 PM, Carsten Schiers wrote: Hi, I have the sources fromhttp://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=5&PFid=5&Level=5&Conn=4&DownTypeID=3&GetDown=false#RTL8111B/ RTL8168B/RTL8111/RTL8168%3Cbr%3ERTL8111C/RTL8111CP/RTL8111D(L)%3Cbr %3ERTL8168C/RTL8111DPThey compile without any change. Unfortunately, I have no idea how to integrate them into the linux tree. Because of the discussion to move to another kernel tree, I also see no use in taking any effort into this integration, as an out-of-kernel compile works pretty well.Note: I use V8.011.00. BR, Carsten. ----- Originalnachricht ----- Von: Maik Brauer <mailinglist@xxxxxxxxxxxxxxx> Gesendet: Mit, 10.6.2009 13:45 An: Xen Users <xen-users@xxxxxxxxxxxxxxxxxxx> Cc: Carsten Schiers <carsten@xxxxxxxxxx> Betreff: Re: AW: [Xen-users] XEN 3.4 - Problems with eth0 (link down) Hi, I think the card which I've build in, is not well implemented in the patched r8169.c module. So the new revisions of this card needs to be updated in this particular file. Has sombody expirience with that? Cheers, Maik On Jun 10, 2009, at 12:23 PM, Carsten Schiers wrote:Hi, not 100% sure, but isn't the 8111b the transceiver of an 8168B, for which you have to compile your own driver r8168.ko from source supplied at Realtek? At least I had to do so. r8169.ko which is supplied will not work. BR, Carsten. ----- Originalnachricht ----- Von: Maik Brauer <mailinglist@xxxxxxxxxxxxxxx> Gesendet: Mit, 10.6.2009 10:26 An: Xen Users <xen-users@xxxxxxxxxxxxxxxxxxx> Betreff: [Xen-users] XEN 3.4 - Problems with eth0 (link down) Hi, I've inside my new server a Realtek 8111b and with XEN it displays in the Console: "ADDRCONF(NETDEV_UP) eth0: Link down". If I boot it via the normal Debian Kernel via Aptitude the Interface comes up and a network connection is working. Over XEN the Interface is still dead and not responding. The only thing is that I can see "ADDRCONF(NETDEV_UP) eth0: link down". I've made the "make world", "make install", "depmod 2.6.18-8-xen". So I did the usual stuff, which I've done for the other 3.2.x installations as well, but without any success. What could might be the reason for this. Thanks. Cheers, Maik _______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-users _______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-users_______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-users _______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-users
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |