[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-users] XEN 3.4.1-pre3 with newer Kernel

Hi Maik,

But after a reboot the system won't come up. Can you please tell me if the steps were right and if the kernel source was the right one.

I tried to reproduce my steps:

wget "http://www.kernel.org/pub/linux/kernel/v2.6/linux-";
tar -xjf linux-

# Got some strange messages with your patch-cmd.
wget "http://gentoo-xen-kernel.googlecode.com/files/xen-patches-2.6.29-6.tar.bz2";
mkdir xen-patches; cd xen-patches
tar -xjf ../xen-patches-2.6.29-6.tar.bz2

cd ../linux-
cat ../xen-patches/600* | patch -p1

# copied my config (cp ../config.gz ./.config.gz; gzip -d .config.gz)

#My config was created on amd64, so maybe here is the bug. Are you running x86_64?

make oldconfig # should find nothing.

make menuconfig # check if your hardware is enabled.

make && make install && make modules_install

update-initramfs -(c|u) -k




Xen-users mailing list



Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.