RE: [Xen-users] Hotplugging SCSI device to Windows 2k3 GOS

["James Harper" <james.harper@xxxxxxxxxxxxxxxx>]

I'll try and have a look at it tonight (in about 8 hours from now).

James

> -----Original Message-----
> From: Jose, Manoj [mailto:Manoj.Jose@xxxxxxx]
> Sent: Thursday, 23 July 2009 04:39
> To: James Harper; Velayudhan, Vinu; Xen-users@xxxxxxxxxxxxxxxxxxx
> Subject: RE: [Xen-users] Hotplugging SCSI device to Windows 2k3 GOS
> 
> James,
> 
> Thanks for the feedback. I have able to load the
> gplpv_chk_wnet_x86_0.10.0.86.msi on a freshly installed windows 2003
image.
> But hot plugging is still not working for me.
> 
> I have an extra scsi device sdb [0:0:1:0] to test scsi hot plug. I
have tried
> following steps.
> 1. Started windows 2003 GOS with /gplpv boot option
> 2. Attached scsi device with following command
>       #xm scsi-attach Windows2003 0:0:1:0 0:0:1:0
> 
> I have seen a Xen SCSI Driver under SCSI and RAID Controllers with a
Yellow
> bang. Newly hot plugged device is not seen in Windows 2003 guest OS.
My system
> is in this state right now and I have made the system available in
RDP. IP
> address is 192.19.221.180 and root password is redhat.
> 
> You can find windows GOS image at /usr directory and Xen config file
at
> /usr/xen-config-file/ directory.
> 
> Your feed back is very much appreciated.
> 
> Thanks
> Manoj
> 
> -----Original Message-----
> From: James Harper [mailto:james.harper@xxxxxxxxxxxxxxxx]
> Sent: Friday, July 17, 2009 6:54 PM
> To: Jose, Manoj; Velayudhan, Vinu; Xen-users@xxxxxxxxxxxxxxxxxxx
> Subject: RE: [Xen-users] Hotplugging SCSI device to Windows 2k3 GOS
> 
> >
> > James,
> >
> > >I'm just uploading a 0.10.0.86 which may or may not fix the
problem.
> >
> > >If you still get the yellow bang, can you tell me what the failure
> code
> > >is when you look at the properties?
> >
> > I have tried 0.10.0.86 and that also resulted in the same error.
> Properties of
> > 'Xen vif device #0' and 'Xen vbd Device #768' says "This device is
not
> > configured correctly (Code 1).
> >
> > >Also, if you are running 3.4.x you should get some debug output in
> > >/var/log/xen/qemu-dm-<domu name>.log, please send that to me too.
> >
> > I am using xen 3.4.0 and I am attaching the log.
> >
> 
> Definitely xenvbd and xennet are not loading correctly or at all.
> 
> Are you able to give me rdp access to the domU that the drivers are
> installed on?
> 
> James

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users