[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-users] The bottleneck of using multinetwork card?

  • To: xen-users@xxxxxxxxxxxxxxxxxxx
  • From: ma qiang <maqiang1984@xxxxxxxxx>
  • Date: Mon, 6 Sep 2010 13:58:10 +0800
  • Delivery-date: Sun, 05 Sep 2010 23:00:37 -0700
  • Domainkey-signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=mime-version:date:message-id:subject:from:to:content-type; b=hpdhuaci2ydMv4vz3F24spoC+Yrs9yexJJR59DVxZhSQ5eSY5+0L2D27eewPQrmE6P UpdpH+FYkT33Jh5lacWkTqjthpEw8pAJJYChXnr2TCf2scOHz4g9QITUZOCcdXZD1luR 2vBKK/PTMLxFOmkr65aElAQYx/5yjG9mR/7ac=
  • List-id: Xen user discussion <xen-users.lists.xensource.com>

Hi all,
    I have install xen 3.4.3 based on centos5.4.
    I changed a line in /etc/xen/xend-config.sxp like below:
(network-script network-bridge)   ---->    (network-script my-network-bridge)

and #cat /etc/xen/scripts/my-network-script prints as below:
/etc/xen/scripts/network-bridge "$@" netdev=eth0 bridge=eth0
/etc/xen/scripts/network-bridge "$@" netdev=eth1 bridge=eth1

Now I installed two vms, and set one vm using eth0, then set the other
using eth1.
So, I can connect internet in both vms.

But now my problem is that the throughput of two network card is the
same as only one network card.
Another words, If I use the only one network card such as eth0 for the
two vms, the throughput of eth0 is about 250m.
But when I set one vm use eth0 and the other use eth1, the total
throughput of eth0 and eth1 is about 250m too.

That why?  Any bottleneck?
Thanks a lot.

Best Wishes!
Qiang Ma

Xen-users mailing list



Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.