Re: [Xen-users] correct steps to add XEN bridge to Debian squeeze?

[Todd Deshane <todd.deshane@xxxxxxx>]

On Thu, Sep 8, 2011 at 7:54 AM, Rudi Ahlers <Rudi@xxxxxxxxxxx> wrote:
> Hi all,
>
> Does anyone know what the correct steps are to add a XEN bridge, let's
> say xenbr0 to Debian Squeeze?
>
>
>
> I have added the following to /etc/network/interfaces
>
>
> # XEN Bridge
> auto xenbr0
>        iface xenbr0 inet manual
>        bridge ports eth0
>        bridge_stp off
>        bridge_fd 0
>
> And then rebooted the server but brctl show still shows eth0 as bridge:
>
>
> newusaxen:~# brctl show
> bridge name     bridge id               STP enabled     interfaces
> eth0            8000.003048c461be       no              peth0
>                                                        vif2.0
>
>
>
> newusaxen:~# ifup xenbr0
> ifup: interface xenbr0 already configured
>
>
>
> newusaxen:~# ifconfig |grep xenbr0
> newusaxen:~#
>
>
>
>
>
> What else should I be doing to get it up and running?

take a look here:
http://wiki.xensource.com/xenwiki/HostConfiguration/Networking

You need to make sure networking in xend is disabled.

Hope that helps.

Thanks,
Todd

-- 
Todd Deshane
http://www.linkedin.com/in/deshantm
http://www.xen.org/products/cloudxen.html
http://runningxen.com/

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users