[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-users] Initialising != Connected, skipping


Here is my problem with Xen : every thing works just fine until I need
to shutdown or reboot the dom0, but then xenstored fails to stop.

The init process continues without problem until :
Halting system...
xenbus_dev_shutdown: backend/console/5/0: Initialising != Connected, skipping
At this point, the system hangs, it doesn't reboot or poweroff.

Strange thing : if, instead of switching to runlevel 0 or runlevel 6,
I do "by hand" all the processes in these runlevels (that is :
  /etc/init.d/xenconsoled stop
  /etc/init.d/xendomains stop
  /etc/init.d/smartd stop
  and so on ...)
then the machine switch off or reboot nicely (still with a warning
from xenstored, which fails to stop).

I have not been able to fix this problem, or even to find its cause.
Can anyone point me to the right direction ?

The system is :
  xen-4.1.2-2.el6.x86_64 *
  kernel-2.6.32-131.21.1.el6.xendom0.x86_64 *
    * from http://xenbits.xen.org/people/mayoung/


Philippe Naudin

Xen-users mailing list



Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.