[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-users] reboot on booting xen-unstable



On 6/7/2012 8:13 PM, Aaron Lebahn wrote:


On Thu, Jun 7, 2012 at 5:27 PM, Rolu <rolu@xxxxxxxx> wrote:
On Thu, Jun 7, 2012 at 3:15 PM, Rolu <rolu@xxxxxxxx> wrote:
> I've compiled Xen unstable from source and tried using it. When
> booting I do see Xen starting, but at the point where I normally start
> getting the dom0 kernel messages I just get a black screen for a few
> seconds, and then the machine reboots. It leaves no messages or log
> files, of course.
>
> revision I compiled: 25459
> OS: ubuntu 12.04
> dom0 kernel 3.2.0-24 (also tried -23), from the repositories. This
> kernel works with Xen 4.1 from the repositories.
>
> I had to apply the patch from
> http://lists.gnu.org/archive/html/qemu-devel/2012-02/msg03460.html to
> get it to compile. Could this have broken something?
>
> Is there a way to have it display some log messages instead of rebooting?


Well possibly, yes. I had a similar issue before and when i compiled and installed xen. But once i tried booting into Xen, it would just hang at a black screen, nothing on it. Sometimes it would show a rapidly flickering cursor, but that's it.

SO, what i had to try was to enable the Xen serial console. What this entails is using a NULL MODEM cable and plugging this into the COM port on your XEN computer and connecting the other end to a second computers COM port. Than you have to use a Terminal program, just as PuTTY or similar (based on your OS on second computer) and this way you can watch the Xen boot messages as they happen and could possibly troubleshoot.

To enable the Serial Console, just have to add "loglvl=all guest_loglvl=all com1=115200,8n1,0x3f8,4 console=com1,vga" after the "multiboot  /boot/xen-4.2-unstable.gz placeholder ... "

You can read all about it here http://wiki.xen.org/wiki/Xen_Serial_Console on the Wiki page, which will explain it a lot better anyways.



>
> Any idea how to get it to work?
>
> If anyone else here is successfully using a recent revision, can you
> tell me which one, so I can try it too?
>

I've tried revision 25364 and 25099 (both picked because I found
someone reporting they worked for them). I got both to compile with
one or two patches, but with the same result.

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxx
http://lists.xen.org/xen-users

I have the same issue running xen 4.2 unstable on ubuntu 12.04. My screen turns black after starting the hypervisor, the computer reboots, and leaves no logs. The patch you mentioned shouldn't change any functionality, so that is probably not the cause. All the messages from the hypervisor seem typical.
Specs:
Ubuntu 12.04
Kernel: 3.2.0-24-generic
Processor: AMD FX-8150

--
Aaron Lebahn
cplusplus328@xxxxxxxxx


_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxx
http://lists.xen.org/xen-users


_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxx
http://lists.xen.org/xen-users

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.