[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-users] xenbr0 / domU static IPs

Am 20.05.2013 um 15:09 schrieb Simon Jones:

> Aha! It’s set to 0,
> echo "1"> /proc/sys/net/ipv4/ip_forward  has changed it to 1, still can’t 
> ping anything other than Dom0 ip on both guests though.

For bridging only setup this should be "0" as no routing happens. 

But it seems you are running into a routing rpoblem with your eth0 as it 
"grabs" the whole network you expect "inside" your dom0 and/or your bridge 

Try to disable eth0 completely (should be have no ip and route) for testing 
your Dom0/domU networking or give him another IP (your admin network is in 
another physical network and should have another IP. In this case you need 
routes and ip_forward on again.

best regards,

Xen-users mailing list



Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.