[Xen-users] vif failing after installing Citrix pv drivers on xen 4.2

[ananthan <ananthannair935@xxxxxxxxx>]

Hi,

   I am trying to make Citrix PV drivers to work on Windows 2008R2 guests running on Xen 4.2.

But for some reasons guest is not able to boot after installing pv drivers.

After commenting vif from configuration file guest booted up with pvdrivers for Disk.

brctl show shows guests vif for some time and later got removed. 

In vm log its showing :

 XEVTCHN: ERROR: Failed to set up device suspend/event-channel.

 XEVTCHN: ERROR: Failed to set up device suspend/event-channel.

 XEVTCHN: ERROR: Failed to set up device suspend/event-channel.

 XEVTCHN: USER: SLGetWindowsInformationDWORD(VirtualXP-licensing-Enabled) failed (c004f012)

 XENUTIL: WARNING: AdapterConnectBackend: timed out in XenbusWaitForBackendStateChange: /local/domain/0/backend/vif/271/0 in state INITWAIT; retry.

Full log attached

/var/log/messages

 xl kernel: device vif271.0 entered promiscuous mode

 xl kernel: ADDRCONF(NETDEV_UP): vif271.0: link is not ready

 xl kernel: device vif271.0-emu entered promiscuous mode

 x1 kernel: xenbr0: port 5(vif271.0-emu) entered forwarding state

 x1 kernel: xenbr0: port 5(vif271.0-emu) entered forwarding state

 x1 kernel: xenbr0: port 5(vif271.0-emu) entered disabled state

 x1 kernel: xenbr0: port 5(vif271.0-emu) entered disabled state

 x1 kernel: device vif271.0-emu left promiscuous mode

 x1 kernel: xenbr0: port 5(vif271.0-emu) entered disabled state

 x1 kernel: xenbr0: port 4(vif271.0) entered disabled state

 x1 kernel: device vif271.0 left promiscuous mode

 x1 kernel: xenbr0: port 4(vif271.0) entered disabled state

 x1 kernel: xen-blkback:backend/vbd/271/768: prepare for reconnect

 x1 kernel: xen-blkback:ring-ref 497, event-channel 10, protocol 2 (x86_32-abi)

 x1 kernel: frontend_changed: backend/vif/271/0: prepare for reconnect

State in Xenstore:

xenstore-ls /local/domain/0/backend/vif/271/0

frontend = "/local/domain/271/device/vif/0"

frontend-id = "271"

>

state = "2"

script = "/etc/xen/scripts/vif-bridge"

mac = "00:16:3e:41:c2:5d"

bridge = "xenbr0"

handle = "0"

type = "vif_ioemu"

feature-sg = "1"

feature-gso-tcpv4 = "1"

feature-rx-copy = "1"

feature-rx-flip = "0"

xenstore-ls -fp shows:

/local/domain/271/device/vif = ""   (n0,r271)

/local/domain/271/device/vif/0 = ""   (n271,r0)

/local/domain/271/device/vif/0/backend = "/local/domain/0/backend/vif/271/0"   (n271,r0)

/local/domain/271/device/vif/0/backend-id = "0"   (n271,r0)

/local/domain/271/device/vif/0/state = "4"   (n271,r0)

/local/domain/271/device/vif/0/handle = "0"   (n271,r0)

/local/domain/271/device/vif/0/mac = "00:16:3e:41:c2:5d"   (n271,r0)

/local/domain/271/device/vif/0/feature-gso-tcpv4-prefix = "1"   (n271,r0)

/local/domain/271/device/vif/0/tx-ring-ref = "353"   (n271,r0)

/local/domain/271/device/vif/0/rx-ring-ref = "163"   (n271,r0)

/local/domain/271/device/vif/0/event-channel = "11"   (n271,r0)

/local/domain/271/device/vif/0/request-rx-copy = "1"   (n271,r0)

/local/domain/271/device/vif/0/feature-sg = "1"   (n271,r0)

/local/domain/271/device/vif/0/feature-rx-notify = "1"   (n271,r0)

/local/domain/271/device/vif/0/feature-no-csum-offload = "1"   (n271,r0)

Do i need to make any changes to make network driver to work 

 Regards,

Ananthan

Attachment: qemu-dm-windows.log
Description: Binary data

Attachment: guest-configuration.cfg
Description: Binary data

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxx
http://lists.xen.org/xen-users