|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-users] Make World Error Code 2
On Wed, 2015-03-25 at 14:55 -0300, Carlos Gustavo Ramirez Rodriguez wrote:
> No problems building the upstream SeaBIOS,
Great, that should mean there is a fix in the tree somewhere. I looked
through the logs and it's not obvious to me which it would be.
Could you please try two other things. First
git clean -fdqx
git checkout rel-1.7.5.2
make defconfig
make
1.7.5.2 is the latest stable release on the 1.7.x branch (Xen 4.5
included 1.7.4).
Secondly could you maybe do an "inverse bisect"? Inverse because you are
actually looking for a patch which fixes things, rather than breaks
things. It can be a bit confusing so I would recommend adding to either
~/.gitconfig or seabios/.git/config:
[alias]
bisect-fixed = bisect bad
bisect-unfixed = bisect good
Then run "git bisect start".
Then each test step is:
git clean -fdqx
make defconfig
make
And then either "git bisect-fixed" or "git bisect-unfixed" depending on
the result, git will then automatically pick the next version to test.
You'll need to seed it with some starting points e.g. "git checkout
rel-1.7.5.2" and "git checkout origin/master" and the test step should
then give it enough to go on.
After not too many steps (effectively log2 of the number of commits) it
should tell you the "bad" commit which in this case is actually the good
commit which fixed things.
Thanks,
Ian.
> but it uses the "Version:
> rel-1.8.0-20-gb458122-20150325_145204-carlos" as you probably already
> knew. Bellow is the terminal output:
>
> root@carlos:/opt# git clone git://git.seabios.org/seabios.git
> Cloning into 'seabios'...
> cremote: Counting objects: 12497, done.
> remote: Compressing objects: 100% (6374/6374), done.
> remote: Total 12497 (delta 10018), reused 7491 (delta 6116)
> Receiving objects: 100% (12497/12497), 2.67 MiB | 534.00 KiB/s, done.
> Resolving deltas: 100% (10018/10018), done.
> Checking connectivity... done.
> root@carlos:/opt# ls
> seabios xen
> root@carlos:/opt# cd seabios/
> root@carlos:/opt/seabios# ls
> COPYING COPYING.LESSER docs Makefile README scripts src vgasrc
> root@carlos:/opt/seabios# make defconfig
> scripts/kconfig/conf --olddefconfig /opt/seabios/src/Kconfig
> #
> # configuration written to /opt/seabios/.config
> #
> Build default config
> #
> # configuration written to /opt/seabios/.config
> #
> root@carlos:/opt/seabios# make
> Build Kconfig config file
> Compile checking out/src/misc.o
> Compile checking out/src/stacks.o
> Compile checking out/src/output.o
> Compile checking out/src/string.o
> Compile checking out/src/block.o
> Compile checking out/src/cdrom.o
> Compile checking out/src/disk.o
> Compile checking out/src/mouse.o
> Compile checking out/src/kbd.o
> Compile checking out/src/system.o
> Compile checking out/src/serial.o
> Compile checking out/src/clock.o
> Compile checking out/src/resume.o
> Compile checking out/src/pnpbios.o
> Compile checking out/src/vgahooks.o
> Compile checking out/src/pcibios.o
> Compile checking out/src/apm.o
> Compile checking out/src/hw/pci.o
> Compile checking out/src/hw/timer.o
> Compile checking out/src/hw/rtc.o
> Compile checking out/src/hw/dma.o
> Compile checking out/src/hw/pic.o
> Compile checking out/src/hw/ps2port.o
> Compile checking out/src/hw/serialio.o
> Compile checking out/src/hw/usb.o
> Compile checking out/src/hw/usb-uhci.o
> Compile checking out/src/hw/usb-ohci.o
> Compile checking out/src/hw/usb-ehci.o
> Compile checking out/src/hw/usb-hid.o
> Compile checking out/src/hw/usb-msc.o
> Compile checking out/src/hw/usb-uas.o
> Compile checking out/src/hw/blockcmd.o
> Compile checking out/src/hw/floppy.o
> Compile checking out/src/hw/ata.o
> Compile checking out/src/hw/ramdisk.o
> Compile checking out/src/hw/virtio-ring.o
> Compile checking out/src/hw/virtio-pci.o
> Compile checking out/src/hw/virtio-blk.o
> Compile checking out/src/hw/virtio-scsi.o
> Compile checking out/src/hw/lsi-scsi.o
> Compile checking out/src/hw/esp-scsi.o
> Compile checking out/src/hw/megasas.o
> Compile checking out/src/post.o
> Compile checking out/src/memmap.o
> Compile checking out/src/malloc.o
> Compile checking out/src/romfile.o
> Compile checking out/src/x86.o
> Compile checking out/src/optionroms.o
> Compile checking out/src/pmm.o
> Compile checking out/src/font.o
> Compile checking out/src/boot.o
> Compile checking out/src/bootsplash.o
> Compile checking out/src/jpeg.o
> Compile checking out/src/bmp.o
> Compile checking out/src/hw/ahci.o
> Compile checking out/src/hw/pvscsi.o
> Compile checking out/src/hw/usb-xhci.o
> Compile checking out/src/hw/usb-hub.o
> Compile checking out/src/hw/sdcard.o
> Compile checking out/src/fw/coreboot.o
> Compile checking out/src/fw/lzmadecode.o
> Compile checking out/src/fw/csm.o
> Compile checking out/src/fw/biostables.o
> Compile checking out/src/fw/paravirt.o
> Compile checking out/src/fw/shadow.o
> Compile checking out/src/fw/pciinit.o
> Compile checking out/src/fw/smm.o
> Compile checking out/src/fw/smp.o
> Compile checking out/src/fw/mtrr.o
> Compile checking out/src/fw/xen.o
> Compiling IASL out/src/fw/acpi-dsdt.hex
> ASL Input: out/src/fw/acpi-dsdt.dsl.i - 474 lines, 19153 bytes,
> 315 keywords
> AML Output: out/src/fw/acpi-dsdt.aml - 4405 bytes, 159 named
> objects, 156 executable opcodes
> Listing File: out/src/fw/acpi-dsdt.lst - 143000 bytes
> Hex Dump: out/src/fw/acpi-dsdt.hex - 41662 bytes
>
> Compilation complete. 0 Errors, 0 Warnings, 0 Remarks, 245
> Optimizations
> Compiling IASL out/src/fw/ssdt-proc.hex
> ASL Input: out/src/fw/ssdt-proc.dsl.i - 35 lines, 762 bytes, 8
> keywords
> AML Output: out/src/fw/ssdt-proc.aml - 120 bytes, 6 named objects,
> 2 executable opcodes
> Listing File: out/src/fw/ssdt-proc.lst - 2653 bytes
> Hex Dump: out/src/fw/ssdt-proc.hex - 1460 bytes
>
> Compilation complete. 0 Errors, 0 Warnings, 0 Remarks, 0 Optimizations
> Compiling IASL out/src/fw/ssdt-pcihp.hex
> ASL Input: out/src/fw/ssdt-pcihp.dsl.i - 36 lines, 758 bytes, 5
> keywords
> AML Output: out/src/fw/ssdt-pcihp.aml - 87 bytes, 5 named objects,
> 0 executable opcodes
> Listing File: out/src/fw/ssdt-pcihp.lst - 2349 bytes
> Hex Dump: out/src/fw/ssdt-pcihp.hex - 1161 bytes
>
> Compilation complete. 0 Errors, 0 Warnings, 0 Remarks, 0 Optimizations
> Compiling IASL out/src/fw/ssdt-misc.hex
> ASL Input: out/src/fw/ssdt-misc.dsl.i - 101 lines, 2567 bytes, 35
> keywords
> AML Output: out/src/fw/ssdt-misc.aml - 354 bytes, 24 named objects,
> 11 executable opcodes
> Listing File: out/src/fw/ssdt-misc.lst - 7658 bytes
> Hex Dump: out/src/fw/ssdt-misc.hex - 3711 bytes
>
> Compilation complete. 0 Errors, 0 Warnings, 0 Remarks, 2 Optimizations
> Compiling IASL out/src/fw/q35-acpi-dsdt.hex
> ASL Input: out/src/fw/q35-acpi-dsdt.dsl.i - 514 lines, 28284
> bytes, 413 keywords
> AML Output: out/src/fw/q35-acpi-dsdt.aml - 7344 bytes, 239 named
> objects, 174 executable opcodes
> Listing File: out/src/fw/q35-acpi-dsdt.lst - 255962 bytes
> Hex Dump: out/src/fw/q35-acpi-dsdt.hex - 69191 bytes
>
> Compilation complete. 0 Errors, 0 Warnings, 0 Remarks, 445
> Optimizations
> Compile checking out/src/fw/acpi.o
> Compile checking out/src/fw/mptable.o
> Compile checking out/src/fw/pirtable.o
> Compile checking out/src/fw/smbios.o
> Compile checking out/src/fw/romfile_loader.o
> Compiling whole program out/ccode32flat.o
> Compiling whole program out/code32seg.o
> Compiling whole program out/ccode16.o
> Compiling to assembler out/src/asm-offsets.s
> Generating offset file out/asm-offsets.h
> Compiling (16bit) out/romlayout.o
> Building ld scripts
> Version: rel-1.8.0-20-gb458122-20150325_145204-carlos
> Fixed space: 0xe05b-0x10000 total: 8101 slack: 14 Percent slack:
> 0.2%
> 16bit size: 35500
> 32bit segmented size: 2202
> 32bit flat size: 26922
> 32bit flat init size: 68432
> Lowmem size: 2176
> f-segment var size: 1200
> Linking out/rom16.o
> Stripping out/rom16.strip.o
> Linking out/rom32seg.o
> Stripping out/rom32seg.strip.o
> Linking out/rom.o
> Prepping out/bios.bin.prep
> Total size: 140548 Fixed: 65824 Free: 121596 (used 53.6% of 256KiB
> rom)
> Creating out/bios.bin
>
>
>
> 2015-03-25 14:50 GMT-03:00 Ian Campbell <ian.campbell@xxxxxxxxxx>:
> On Wed, 2015-03-25 at 14:36 -0300, Carlos Gustavo Ramirez
> Rodriguez
> wrote:
> > Hello Ian,
> >
> >
> > I tried git clone following that link path and I was able to
> download
> > and "LC_ALL=C make" the seabios, but that didn't work, after
> that, I
> > tried going to the /tools/firmware/seabios-dir-remote and
> seabios-dir
> > both and running the same code "LC_ALL=C make", and still
> same error,
> > after that, I tried the next ideia, /tools/firmware/ and
> "LC_ALL=C
> > make -C seabios-dir all" and after returning to the make
> world, same
> > problem.
> >
> > Besides going to 4.6 any other workaround?
>
> Building the upstream SeaBIOS tree and seeing if it builds
> would give us
> a hint as to whether we needed to look for a patch to backport
> or if
> this was a new bug caused by e.g. the bleeding edge Ubuntu you
> are
> running (seabios can be a bit sensitive to toolchain changes)
> which
> needs to be reported to the upstream list.
>
> So, please can you try:
> git clone git://git.seabios.org/seabios.git
> cd seabios.git
> make defconfig
> make
> and see if that also exhibits the issue.
>
> FYI Xen 4.5.x uses the rel-1.7.5 tag by default.
>
> Ian.
>
>
>
>
>
>
> --
> AbraÃos
> Gustavo
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxx
http://lists.xen.org/xen-users
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |