[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] good progress on pci vga passthrough in xen-3.4-rc1



Hi Tim:

  I have modified the source code and recompiled. Everything seems good . Without RMRR incorrect and VT-D enable.

   Domain0 works with VT-D.   

   DomainU asigned the PCIE NVIDIA card

   installed the nvidia-177-83 drivers for DomainU .

   But I am still face the tough question mentioned before that DomainU cann't be   displaied on the second screen.

    Booted the DomainU with console --> configured the driver for card --> startx

     DomainU staied on the same screen then went into  black screen but still alived.  

Any hint was appreciated.

Thanks so much



2009/4/15 Tim Moore <timothy.moore@xxxxxxxxxxx>

Hello Wei,

 

Please try with your Nvidia card, ATI not working with VT-d.

 

You WILL have to compile from source, to fix bad RMRR error. This will make VT-d work.

 

Then hope your BIOS isn’t too broken and try again.

 

Tim

 

And Everytime i use the PCIE card render for Domain0, the VT-D can't be Enable Because of the RMMR incorrect.

 

See:

http://www.nabble.com/Re:-Re:-VT-D-RMRR-is-incorrect-p22022061.html

 

Use this work around and (/* the whole “if” section */) and compile Xen.

 


From: wei zhou [mailto:weizhou.sir@xxxxxxxxx]
Sent: 15 April 2009 12:28
To: Stefano Stabellini
Cc: Tim Moore; xen-devel@xxxxxxxxxxxxxxxxxxx; Bryan York


Subject: Re: [Xen-devel] good progress on pci vga passthrough in xen-3.4-rc1

 

 

2009/4/15 Stefano Stabellini <stefano.stabellini@xxxxxxxxxxxxx>

Tim Moore wrote:

> Thread-Topic:
> [XCI] Question?
> Thread-Index:
> Acm88go+caOvZEXVSRCK6Iw2iEIE+A==
> Message-ID:
> <14D9C9E2ED61ED41BC3B37ACDF4E8800029E434B9F1F@xxxxxxxxxxxxxxxxxxxxxxx>
> Accept-Language:
> en-US
> X-MS-Exchange-Organization-SCL:
> -1
> Content-Type:
> multipart/alternative;
> boundary="_000_14D9C9E2ED61ED41BC3B37ACDF4E8800029E434B9F1Fheavyvm03he_"
> MIME-Version:
> 1.0
>
>
> Hi J/Ross, Hope you can help
>
>
>
> Reading the Xen Client Initiative meeting minutes from May 20 2008, it
> mentions that:
>
>
>
>     * Multiple graphics cards are working with recent patches (3 Main
>       vendors)
>
>
>
> Do we know which 3x Graphics card vendors are working?
>
>
>
> I have built the XCI source from xenbits and whilst using it seems that
> the VGA card  support is still quite specific
>


The VGA support in XCI at the moment is Intel specific.

However videocard passthrough should work OK with most graphic cards if
you passthrought the videocard to the guest as a secondary card (you do
not disable the emulated cirrus vga). The problem with this approach is
that you are not able to see anything on the screen until the guest
enables the secondary card so you may need to configure the guest using
vnc fron another machine, at least the first time.
On the other hand if you disable the emulated vga so the pt graphic card
happers as a primary in the guest, you should be able to see output on
the screen since the beginning of the guest boot sequence, but then you
are going to have more vga bios problems.




_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel



I have tried pass through a PCI ATI graphic card to DomainU.
I recognized that the ATI would be the second card.
I boot the DomainU with console and modified the xorg.conf file for the X-window rendered by the ATI card.
But the DomainU still displaied on the same screen.

I want to know how to make the DomainU displaied on the second screen?
How to disable the emulated graphic card.


--
Best regards
joe
E-mail: weizhou.sir@xxxxxxxxx




--
Best regards !
William zhou
E-mail: weizhou.sir@xxxxxxxxx

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.