|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] Re: [Xen-users] pvops dom0 kernel: crash in print_all_ICs()
On Mon, Mar 22, 2010 at 01:23:24PM -0700, kishore kumar wrote: > xend was not running so I did below steps and rebooted. The system did > not boot up. SO I removed the line added in /proc/fstab and again > rebooted. Attached is the captured file. Can you please let me know what > is going wrong again? > Please send the logs as text files, not word documents! Mounting root filesystem. mount: could not find filesystem '/dev/root' Setting up other filesystems. Setting up new root fs setuproot: moving /dev failed: No such file or directory no fstab.sys, mounting internal defaults setuproot: error mounting /proc: No such file or directory setuproot: error mounting /sys: No such file or directory Switching to new root and running init. unmounting old /dev unmounting old /proc unmounting old /sys switchroot: mount failed: No such file or directory Looks like wrong root= parameter again.. Command line: ro root=/dev/VolGroup01/Logvol00 console=hvc0 earlyprintk=xen nomodeset initcall_debug debug loglevel=10 Was "/dev/VolGroup01/Logvol00" your root device? -- Pasi > step 1. I loaded the xen-evtchn.ko by insmod. > > > > step 2: And added the below line in /proc/fstab. > > > > none /proc/xen xenfs defaults 0 0 > > > Thanks > > On Fri, Mar 19, 2010 at 1:03 PM, Pasi Kärkkäinen <[1]pasik@xxxxxx> wrote: > > On Fri, Mar 19, 2010 at 12:57:58PM -0700, kishore kumar wrote: > > Attached is the captured file. > > > > Now the machine booted up. :) 2.6.32.10 is booted. > > > > But I dont see xen up and running. > > > > Whe I open Virtual Machine Manager I dont see xen running. > (ATTACHED IS > > THE SCREEN SHOT). > > > > - Do you have /proc/xen (xenfs) mounted? > - Do you have xen-evtchn driver module loaded in dom0? > - Do you have xend running? > > Please see and read this wiki page: > [2]http://wiki.xensource.com/xenwiki/XenParavirtOps > > It explains the other configurations you need to do for Xen/xend to > actually work. > > Anyway, the problem for you was wrong grub.conf root= option for the > dom0 kernel. > > -- Pasi > > > On Fri, Mar 19, 2010 at 12:05 PM, Pasi Kärkkäinen > <[1][3]pasik@xxxxxx> wrote: > > > > On Fri, Mar 19, 2010 at 11:22:54AM -0700, Jeremy Fitzhardinge > wrote: > > > On 03/19/2010 10:59 AM, Pasi Kärkkäinen wrote: > > >> On Thu, Mar 18, 2010 at 04:56:35PM -0700, kishore kumar wrote: > > >> > > >>> Attached is the capture log after changing the grub.conf > to > > >>> > > >>> ro root=/dev/VolGroup01/LogVol00 console=hvc0 > earlyprintk=xen > > nomodeset > > >>> initcall_debug debug swiotlb=force apic=debug loglevel=10 > > >>> > > >>> for the dom 0 kernel command line. > > >>> > > >>> > > >> Hmm, interesting. Now it seems to crash in a different place. > > >> > > >> Jeremy: Have you seen this one earlier? > > >> > > > > > > No, but it looks like the result of "apic=debug" on the kernel > command > > > line. That won't do anything useful (the kernel has no APICs, > they > > all > > > belong to Xen), and can only cause harm. As it appears to have > done. > > > > > > > Ok, my bad. > > > > So please remove the "apic=debug" from the dom0 kernel cmdline > and try > > again. > > It should look like this: > > > > ro root=/dev/VolGroup01/LogVol00 console=hvc0 earlyprintk=xen > nomodeset > > initcall_debug debug loglevel=10 > > > > -- Pasi > > > > > J > > > > > >> .... IRQ redirection table: > > >> NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: > > >> 00 000 0 0 0 0 0 0 0 00 > > >> IRQ to pin mappings: > > >> BUG: unable to handle kernel NULL pointer dereference at > (null) > > >> IP: [<ffffffff819bf0e0>] print_all_ICs+0x487/0x500 > > >> PGD 0 > > >> Oops: 0000 [#1] SMP > > >> last sysfs file: > > >> CPU 0 > > >> Modules linked in: > > >> Pid: 1, comm: swapper Not tainted 2.6.32.10 #2 > > >> RIP: e030:[<ffffffff819bf0e0>] [<ffffffff819bf0e0>] > > print_all_ICs+0x487/0x500 > > >> RSP: e02b:ffff880064edbe20 EFLAGS: 00010286 > > >> RAX: ffffffff816ed2c0 RBX: 0000000000000000 RCX: > 000000000f640f01 > > >> RDX: ffff880066808000 RSI: ffff880064edbd40 RDI: > 0000000000000000 > > >> RBP: ffff880064edbea0 R08: 0000000000000002 R09: > 0000000000000000 > > >> R10: 0000000000000000 R11: ffff880064edbce0 R12: > 0000000000000000 > > >> R13: 0000000000000000 R14: 0000000000000000 R15: > 0000000000000000 > > >> FS: 0000000000000000(0000) GS:ffff880005ec8000(0000) > > knlGS:0000000000000000 > > >> CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b > > >> CR2: 0000000000000000 CR3: 0000000001001000 CR4: > 0000000000002660 > > >> DR0: 0000000000000000 DR1: 0000000000000000 DR2: > 0000000000000000 > > >> DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: > 0000000000000400 > > >> Process swapper (pid: 1, threadinfo ffff880064eda000, task > > ffff880064ee0000) > > >> Stack: > > >> ffff880000000000 ffffffff00000000 ffff880000000000 > ffffffff811ebee8 > > >> <0> ffff880064edbe60 0000000181083e7c 000000ff00000002 > > 0000000000000002 > > >> <0> ffff880000000000 ffffffff810846f0 ffffffff817ce660 > > 00000000291fd332 > > >> Call Trace: > > >> [<ffffffff811ebee8>] ? debugfs_create_file+0x239/0x28e > > >> [<ffffffff810846f0>] ? ktime_get+0x78/0x93 > > >> [<ffffffff819bec59>] ? print_all_ICs+0x0/0x500 > > >> [<ffffffff8100a07e>] do_one_initcall+0x73/0x18b > > >> [<ffffffff819ae961>] kernel_init+0x172/0x1cc > > >> [<ffffffff81013eaa>] child_rip+0xa/0x20 > > >> [<ffffffff8104edcf>] ? finish_task_switch+0x0/0xcc > > >> [<ffffffff81013810>] ? restore_args+0x0/0x30 > > >> [<ffffffff8108ae5b>] ? trace_hardirqs_off_caller+0x2f/0x89 > > >> [<ffffffff81013ea0>] ? child_rip+0x0/0x20 > > >> Code: 45 b0 0f 8c 5b fd ff ff 48 c7 c7 34 40 60 81 31 c0 45 31 > e4 e8 > > 11 d5 69 ff 31 ff e8 67 b5 6f ff eb 5a 48 85 c0 74 4a 48 8b 58 > 40<48> > > 83 3b 00 74 40 44 89 e6 48 c7 c7 4d 40 60 81 31 c0 e8 e8 d4 > > >> RIP [<ffffffff819bf0e0>] print_all_ICs+0x487/0x500 > > >> RSP<ffff880064edbe20> > > >> CR2: 0000000000000000 > > >> ---[ end trace 0007ad9d59420718 ]--- > > >> swapper used greatest stack depth: 4168 bytes left > > >> Kernel panic - not syncing: Attempted to kill init! > > >> Pid: 1, comm: swapper Tainted: G D 2.6.32.10 #2 > > >> Call Trace: > > >> [<ffffffff8105b747>] panic+0xa5/0x167 > > >> [<ffffffff8100ed81>] ? xen_force_evtchn_callback+0xd/0xf > > >> [<ffffffff8105f2b3>] ? do_exit+0x38a/0x701 > > >> [<ffffffff8100f43f>] ? xen_restore_fl_direct_end+0x0/0x1 > > >> [<ffffffff8108f823>] ? lock_release+0x179/0x184 > > >> [<ffffffff8108ca25>] ? trace_hardirqs_on+0xd/0xf > > >> [<ffffffff81475d4f>] ? _write_unlock_irq+0x37/0x3c > > >> [<ffffffff8105efa7>] do_exit+0x7e/0x701 > > >> [<ffffffff819b02ef>] ? md_run_setup+0x104/0x4ef > > >> [<ffffffff8147764c>] oops_end+0xbf/0xc7 > > >> [<ffffffff81038a02>] no_context+0x1f1/0x200 > > >> [<ffffffff819b02ef>] ? md_run_setup+0x104/0x4ef > > >> [<ffffffff81038c61>] __bad_area_nosemaphore+0x191/0x1b4 > > >> [<ffffffff8100f452>] ? check_events+0x12/0x20 > > >> [<ffffffff81038d0e>] bad_area_nosemaphore+0x13/0x15 > > >> [<ffffffff81478b20>] do_page_fault+0x16d/0x2a2 > > >> [<ffffffff814769d5>] page_fault+0x25/0x30 > > >> [<ffffffff819bf0e0>] ? print_all_ICs+0x487/0x500 > > >> [<ffffffff811ebee8>] ? debugfs_create_file+0x239/0x28e > > >> [<ffffffff810846f0>] ? ktime_get+0x78/0x93 > > >> [<ffffffff819bec59>] ? print_all_ICs+0x0/0x500 > > >> [<ffffffff8100a07e>] do_one_initcall+0x73/0x18b > > >> [<ffffffff819ae961>] kernel_init+0x172/0x1cc > > >> [<ffffffff81013eaa>] child_rip+0xa/0x20 > > >> [<ffffffff8104edcf>] ? finish_task_switch+0x0/0xcc > > >> [<ffffffff81013810>] ? restore_args+0x0/0x30 > > >> [<ffffffff8108ae5b>] ? trace_hardirqs_off_caller+0x2f/0x89 > > >> [<ffffffff81013ea0>] ? child_rip+0x0/0x20 > > >> > > >> > > >> -- Pasi > > >> > > >> > > >> > > >>> > > >>> On Thu, Mar 18, 2010 at 2:27 PM, Pasi > > Kärkkäinen<[1][2][4]pasik@xxxxxx> wrote: > > >>> > > >>> On Thu, Mar 18, 2010 at 01:23:41PM -0700, kishore kumar > wrote: > > >>> > pvdisplay does not work in my RHEL machine. > > >>> > > > >>> > I did pvscan. > > >>> > below is the output. > > >>> > > > >>> > PV /dev/sda2 VG VolGroup01 lvm2 [232.78 GB / 0 > free] > > >>> > > > >>> > Total: 1 [232.78 GB] / in use: 1 [232.78 GB] / in > no VG: > > 0 [0 ] > > >>> > > > >>> > > >>> Ok so /dev/sda2 is the correct device holding the > VolGroup01. > > >>> > > >>> Looking at your latest capture.doc I see this: > > >>> > > >>> Command line: ro root=/dev/vg00/lv01 console=hvc0 > > earlyprintk=xen > > >>> nomodeset initcall_debug debug swiotlb=force apic=debug > > loglevel=10 > > >>> > > >>> So your root= parameter is wrong! Edit grub.conf and > replace > > it with the > > >>> actual root device: > > >>> root=/dev/VolGroup01/LogVol00 > > >>> > > >>> -- Pasi > > >>> > > >>> > On Thu, Mar 18, 2010 at 12:31 PM, Pasi Kärkkäinen > > >>> <[1][2][3][5]pasik@xxxxxx> wrote: > > >>> > > > >>> > On Thu, Mar 18, 2010 at 11:16:26AM -0700, > kishore > > kumar wrote: > > >>> > > I did the below steps for pvops dom 0 > kernel. > > >>> > > > > >>> > > make menuconfig > > >>> > > make bzImage > > >>> > > make modules > > >>> > > make modules_install > > >>> > > cp -a .config /boot/config-2.6.32.10 > > >>> > > cp -a System.map > /boot/System.map-2.6.32.10 > > >>> > > cp -a arch/x86/boot/bzImage > > /boot/vmlinuz-2.6.32.10 > > >>> > > /sbin/mkinitrd -f --builtin=ahci > > /boot/initrd-2.6.32.10.img > > >>> > 2.6.32.10 > > >>> > > I tried root=/dev/VolGroup01/LogVol00 . > > >>> > > > > >>> > > > >>> > Ok. > > >>> > > > >>> > Please run "pvdisplay" to see which actual > partition > > is the LVM > > >>> PV for > > >>> > your > > >>> > volume group. > > >>> > > > >>> > Also if you're running Fedora 12 you could try > > generating an > > >>> initrd > > >>> > image > > >>> > with dracut instead of mkinitrd. > > >>> > > > >>> > -- Pasi > > >>> > > > >>> > > > > >>> > > On Thu, Mar 18, 2010 at 9:15 AM, Pasi > Kärkkäinen > > >>> > <[1][2][3][4][6]pasik@xxxxxx> wrote: > > >>> > > > > >>> > > On Wed, Mar 17, 2010 at 03:20:13PM > -0700, > > kishore kumar > > >>> wrote: > > >>> > > > Here is the output of df -h and > cat > > /etc/fstab of my > > >>> > machine. > > >>> > > > > > >>> > > > > >>> > > Did you try both > > root=/dev/mapper/VolGroup01-LogVol00 and > > >>> > > root=/dev/VolGroup01/LogVol00 arguments > for > > the dom0 > > >>> kernel? > > >>> > > > > >>> > > How did you generate the initrd image > for the > > dom0 kernel? > > >>> > > > > >>> > > Anyway this sounds like a grub.conf or > initrd > > problem, not > > >>> Xen or > > >>> > pvops > > >>> > > dom0 kernel kernel problem. > > >>> > > > > >>> > > -- Pasi > > >>> > > > > >>> > > > Please let me know your thoughts. > > >>> > > > > > >>> > > > [root@localhost kishore]# df -h > > >>> > > > > > >>> > > > Filesystem Size Used Avail Use% > Mounted > > on > > >>> > > > > > >>> > > > /dev/mapper/VolGroup01-LogVol00 > > >>> > > > > > >>> > > > > 223G > > 29G 182G 14% > > >>> / > > >>> > > > > > >>> > > > /dev/sda1 99M 81M 13M 87% /boot > > >>> > > > > > >>> > > > tmpfs 757M 0 757M 0% /dev/shm > > >>> > > > > > >>> > > > [root@localhost kishore]# cat > /etc/fstab > > >>> > > > > > >>> > > > /dev/VolGroup01/LogVol00 / ext3 > defaults > > 1 1 > > >>> > > > > > >>> > > > LABEL=/boot /boot ext3 defaults 1 > 2 > > >>> > > > > > >>> > > > tmpfs /dev/shm tmpfs defaults 0 0 > > >>> > > > > > >>> > > > devpts /dev/pts devpts > gid=5,mode=620 0 > > 0 > > >>> > > > > > >>> > > > sysfs /sys sysfs defaults 0 0 > > >>> > > > > > >>> > > > proc /proc proc defaults 0 0 > > >>> > > > > > >>> > > > /dev/VolGroup01/LogVol01 swap > swap > > defaults 0 0 > > >>> > > > > > >>> > > > [root@localhost kishore]# > > >>> > > > > > >>> > > > On Tue, Mar 16, 2010 at 4:18 PM, > Pasi > > Kärkkäinen > > >>> > > <[1][2][3][4][5][7]pasik@xxxxxx> > wrote: > > >>> > > > > > >>> > > > On Tue, Mar 16, 2010 at > 03:40:46PM > > -0700, kishore > > >>> kumar > > >>> > wrote: > > >>> > > > > I am not sure. Can you > please > > let me know how > > >>> to > > >>> > check > > >>> > > this? any > > >>> > > > command > > >>> > > > > ?? > > >>> > > > > > >>> > > > well simple "df -h" will show > it. and > > also "cat > > >>> > /etc/fstab". > > >>> > > > You can also check it from your > grub > > >>> configuration.. from > > >>> > the > > >>> > > working > > >>> > > > baremetal (non-Xen) entry. > > >>> > > > > > >>> > > > -- Pasi > > >>> > > > > > > >>> > > > > On Tue, Mar 16, 2010 at > 3:29 PM, > > Pasi > > >>> Kärkkäinen > > >>> > > > > <[1][2][3][4][5][6][8]pasik@xxxxxx> > > wrote: > > >>> > > > > > > >>> > > > > On Tue, Mar 16, 2010 at > > 03:22:50PM -0700, > > >>> kishore > > >>> > kumar > > >>> > > wrote: > > >>> > > > > > attached is the > log > > captured in with > > >>> the word > > >>> > > document . > > >>> > > > > > > > >>> > > > > > > >>> > > > > Scanning logical > volumes > > >>> > > > > Reading all physical > volumes. > > This may > > >>> take a > > >>> > while... > > >>> > > > > Activating logical > volumes > > >>> > > > > Volume group > "VolGroup01" not > > found > > >>> > > > > Trying to resume from > > >>> /dev/VolGroup01/LogVol01 > > >>> > > > > Unable to access resume > device > > >>> > (/dev/VolGroup01/LogVol01) > > >>> > > > > Creating root device. > > >>> > > > > Mounting root > filesystem. > > >>> > > > > mount: could not find > > filesystem '/dev/root' > > >>> > > > > Setting up other > filesystems. > > >>> > > > > Setting up new root fs > > >>> > > > > setuproot: moving /dev > failed: > > No such file > > >>> or > > >>> > directory > > >>> > > > > no fstab.sys, mounting > > internal defaults > > >>> > > > > setuproot: error > mounting > > /proc: No such > > >>> file or > > >>> > directory > > >>> > > > > setuproot: error > mounting > > /sys: No such file > > >>> or > > >>> > directory > > >>> > > > > Switching to new root > and > > running init. > > >>> > > > > unmounting old /dev > > >>> > > > > unmounting old /proc > > >>> > > > > unmounting old /sys > > >>> > > > > switchroot: mount > failed: No > > such file or > > >>> directory > > >>> > > > > init used greatest > stack > > depth: 4088 bytes > > >>> left > > >>> > > > > Kernel panic - not > syncing: > > Attempted to > > >>> kill init! > > >>> > > > > > > >>> > > > > So it seems it gets all > the > > way to executing > > >>> the > > >>> > initrd > > >>> > > image, > > >>> > > > > which then fails to > mount the > > root fs. > > >>> > > > > > > >>> > > > > Earlier in the log: > > >>> > > > > ata1: SATA link up 3.0 > Gbps > > (SStatus 123 > > >>> SControl > > >>> > 300) > > >>> > > > > ata1.00: ATA-8: Hitachi > > HDT721025SLA380, > > >>> STBOA3AA, > > >>> > max > > >>> > > UDMA/133 > > >>> > > > > ata1.00: 488397168 > sectors, > > multi 0: LBA48 > > >>> NCQ > > >>> > (depth > > >>> > > 31/32), AA > > >>> > > > > ata1.00: configured for > > UDMA/133 > > >>> > > > > scsi 0:0:0:0: > Direct-Access > > ATA > > >>> Hitachi > > >>> > HDT72102 > > >>> > > STBO > > >>> > > > PQ: 0 > > >>> > > > > ANSI: 5 > > >>> > > > > sd 0:0:0:0: Attached > scsi > > generic sg0 type 0 > > >>> > > > > sd 0:0:0:0: [sda] > 488397168 > > 512-byte logical > > >>> > blocks: (250 > > >>> > > GB/232 > > >>> > > > GiB) > > >>> > > > > sd 0:0:0:0: [sda] Write > > Protect is off > > >>> > > > > sd 0:0:0:0: [sda] Mode > Sense: > > 00 3a 00 00 > > >>> > > > > sd 0:0:0:0: [sda] Write > cache: > > enabled, read > > >>> cache: > > >>> > > enabled, > > >>> > > > doesn't > > >>> > > > > support DPO or FUA > > >>> > > > > sda: sda1 sda2 > > >>> > > > > sd 0:0:0:0: [sda] > Attached > > SCSI disk > > >>> > > > > > > >>> > > > > so /dev/sda was > detected. Is > > your root lvm > > >>> volume > > >>> > on > > >>> > > /dev/sda ? > > >>> > > > > Is > /dev/VolGroup01/LogVol01 > > really your root > > >>> fs? > > >>> > > > > > > >>> > > > > -- Pasi > > >>> > > > > > > >>> > > > > > > > >>> > > > > > > > >>> > > > > > On Tue, Mar 16, > 2010 at > > 3:03 PM, Pasi > > >>> > Kärkkäinen > > >>> > > > > > > <[1][2][3][4][5][6][7][9]pasik@xxxxxx> wrote: > > >>> > > > > > > > >>> > > > > > On Tue, Mar 16, > 2010 > > at 02:56:06PM > > >>> -0700, > > >>> > kishore > > >>> > > kumar > > >>> > > > wrote: > > >>> > > > > > > Please > find the > > attached log > > >>> file after > > >>> > fixing > > >>> > > the > > >>> > > > dom 0 > > >>> > > > > kernel cmd > > >>> > > > > > line > > >>> > > > > > > as below > > >>> > > > > > > > > >>> > > > > > > ro > > root=/dev/VolGroup01/LogVol00 > > >>> > console=hvc0 > > >>> > > > > earlyprintk=xen > > >>> > > > > > nomodeset > > >>> > > > > > > > > >>> > > > > > > > >>> > > > > > There's > something > > wrong with the log, > > >>> the > > >>> > dom0 > > >>> > > kernel > > >>> > > > parts are > > >>> > > > > all on > > >>> > > > > > one line.. > > >>> > > > > > It's really > difficult > > to read it. > > >>> > > > > > > > >>> > > > > > -- Pasi > > >>> > > > > > > > >>> > > > > > > Thanks > > >>> > > > > > > > > >>> > > > > > > > > >>> > > > > > > On Tue, > Mar 16, > > 2010 at 2:29 PM, > > >>> Pasi > > >>> > > Kärkkäinen > > >>> > > > > > > > <[1][2][3][4][5][6][7][8][10]pasik@xxxxxx> > > >>> wrote: > > >>> > > > > > > > > >>> > > > > > > On Tue, > Mar > > 16, 2010 at > > >>> 02:16:22PM > > >>> > -0700, > > >>> > > kishore > > >>> > > > kumar > > >>> > > > > wrote: > > >>> > > > > > > > I > did > > below steps. > > >>> > > > > > > > > > >>> > > > > > > > > > >>> > > > > > > > > I > > pulled DOM 0 kernel > > >>> from > > >>> > > > > > > > > git > > clone > > >>> > > > > > > > > >>> > > > > > > > >>> > > > > > > >>> > > > > > >>> > > > > >>> > > > >>> > > > > git://[1][2][3][4][5][6][7][8][9][11]git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> > > > > > > > > > linux-2.6-xen > > >>> > > > > > > > > > >>> > > > > > > > > cd > > linux-2.6-xen > > >>> > > > > > > > > > >>> > > > > > > > > make > > clean > > >>> > > > > > > > > > >>> > > > > > > > > cp -a > > .config .config-old > > >>> > > > > > > > > > >>> > > > > > > > > wget -O > > .config > > >>> > > > > > > > > > >>> > > > > > > > > >>> > > > > > > > >>> > > > > > > >>> > > > > > >>> > > > > >>> > > > >>> > > > > [2][3][4][5][6][7][8][9][10][12]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> > > > > > > > > > >>> > > > > > > > > make > > oldconfig > > >>> > > > > > > > > > >>> > > > > > > > > make > > bzImage > > >>> > > > > > > > > > >>> > > > > > > > > make > > modules > > >>> > > > > > > > > > >>> > > > > > > > > make > > modules_install > > >>> > > > > > > > > > >>> > > > > > > > > cp -a > > .config > > >>> > /boot/config-2.6.32.9 > > >>> > > > > > > > > > >>> > > > > > > > > cp -a > > System.map > > >>> > > /boot/System.map-2.6.32.9 > > >>> > > > > > > > > > >>> > > > > > > > > cp -a > > >>> arch/x86/boot/bzImage > > >>> > > > /boot/vmlinuz-2.6.32.9 > > >>> > > > > > > > > > >>> > > > > > > > > and > > modified the > > >>> grub.conf as > > >>> > below > > >>> > > > > > > > > > >>> > > > > > > > > > >>> > > > > > > > > > Root(hd0,0) > > >>> > > > > > > > > > >>> > > > > > > > > kernel > > /xen.gz > > >>> console=vga,com1 > > >>> > > > com1=115200,8n1 > > >>> > > > > msi=1 > > >>> > > > > > iommu=1 > > >>> > > > > > > > > > >>> > > > > > > > > module > > /vmlinuz-2.6.32.9 > > >>> ro > > >>> > > > > > root=/dev/VolGroup01/LogVo100 > > >>> > > > > > rhgb > > >>> > > > > > > quiet > > >>> > > > > > > > > > >>> > > > > > > > > module > > >>> /initrd-2.6.32.9.img > > >>> > > > > > > > > > >>> > > > > > > > > > >>> > > > > > > > > and > > rebooted the machine. > > >>> Then > > >>> > It > > >>> > > booted with > > >>> > > > some > > >>> > > > > xen > > >>> > > > > > messages > > >>> > > > > > > and > > >>> > > > > > > > > stopped. > > Those were the > > >>> > messages > > >>> > > captured > > >>> > > > from > > >>> > > > > serial > > >>> > > > > > console. > > >>> > > > > > > > > > >>> > > > > > > > > Please > > let me know if I > > >>> did > > >>> > something > > >>> > > wrong > > >>> > > > here. > > >>> > > > > > > > > > >>> > > > > > > > > >>> > > > > > > Please > fix the > > kernel cmdline > > >>> based > > >>> > on my > > >>> > > earlier > > >>> > > > email, > > >>> > > > > and > > >>> > > > > > capture and > > >>> > > > > > > post > the > > >>> > > > > > > serial > console > > log again! > > >>> > > > > > > > > >>> > > > > > > -- Pasi > > >>> > > > > > > > > > >>> > > > > > > > > > >>> > > > > > > > > On Tue, > > Mar 16, 2010 at > > >>> 1:20 PM, > > >>> > Pasi > > >>> > > > Kärkkäinen > > >>> > > > > > > > > >>> <[3][4][5][6][7][8][9][10][11][13]pasik@xxxxxx> > > >>> > wrote: > > >>> > > > > > > > > > >>> > > > > > > > > On > > Tue, Mar 16, 2010 at > > >>> > 01:16:28PM > > >>> > > -0700, > > >>> > > > Jeremy > > >>> > > > > > Fitzhardinge > > >>> > > > > > > wrote: > > >>> > > > > > > > > > On > > 03/16/2010 12:48 > > >>> PM, Pasi > > >>> > > Kärkkäinen > > >>> > > > wrote: > > >>> > > > > > > > > >> On > > Tue, Mar 16, 2010 > > >>> at > > >>> > 09:43:44PM > > >>> > > +0200, > > >>> > > > Pasi > > >>> > > > > > Kärkkäinen > > >>> > > > > > > wrote: > > >>> > > > > > > > > >> > > >>> > > > > > > > > >>> > > On Tue, Mar 16, > > >>> 2010 at > > >>> > > 10:32:17AM > > >>> > > > -0700, > > >>> > > > > kishore > > >>> > > > > > kumar > > >>> > > > > > > wrote: > > >>> > > > > > > > > >>> > > >>> > > > > > > > > >>>> > > Attached is > > >>> the > > >>> > output > > >>> > > captured > > >>> > > > from > > >>> > > > > serial > > >>> > > > > > console. > > >>> > > > > > > > > >>>> > > >>> > > > > > > > > >>>> > > Machine does > > >>> not boot > > >>> > after > > >>> > > > compiling xen > > >>> > > > > 3.4.3 > > >>> > > > > > with > > >>> > > > > > > pv_ops > dom > > >>> > > > > > > > > 0 > > kernel. > > >>> > > > > > > > > >>>> > > >>> > > > > > > > > >>>> > > Please let me > > >>> know > > >>> > what is > > >>> > > going > > >>> > > > wrong > > >>> > > > > here. > > >>> > > > > > > > > >>>> > > >>> > > > > > > > > >>>> > > >>> > > > > > > > > >>> > > Ok this looks like > > >>> a bug > > >>> > that is > > >>> > > already > > >>> > > > being > > >>> > > > > sorted > > >>> > > > > > out on > > >>> > > > > > > > > > xen-devel mailinglist. > > >>> > > > > > > > > >>> I > > added CC to > > >>> xen-devel. > > >>> > > > > > > > > >>> > > >>> > > > > > > > > >>> > > >>> > > > > > > > > >> > > >>> > > > > > > > > > > > >>> > > > > > > > > > > > Those messages are > > >>> not a > > >>> > problem in > > >>> > > > themselves, > > >>> > > > > but the > > >>> > > > > > related > > >>> > > > > > > > > > problem > > >>> > > > > > > > > > is > > believed to be > > >>> fixed in > > >>> > current > > >>> > > > > xen/stable-2.6.32.x. > > >>> > > > > > It > > >>> > > > > > > looks > like > > >>> > > > > > > > > > the > > output stops > > >>> there > > >>> > because the > > >>> > > Xen > > >>> > > > console > > >>> > > > > isn't set > > >>> > > > > > up > > >>> > > > > > > > properly > > >>> > > > > > > > > for > > >>> > > > > > > > > > > > some reason. > > >>> > > > > > > > > > > > >>> > > > > > > > > > >>> > > > > > > > > Yeah, > > remove "rhgb > > >>> quiet" from > > >>> > the > > >>> > > options.. > > >>> > > > the > > >>> > > > > dom0 > > >>> > > > > > kernel > > >>> > > > > > > cmdline > > >>> > > > > > > > > should > > be like this: > > >>> > > > > > > > > ro > > >>> > root=/dev/VolGroup01/LogVol00 > > >>> > > > console=hvc0 > > >>> > > > > > earlyprintk=xen > > >>> > > > > > > > nomodeset > > >>> > > > > > > > > -- > > Pasi > > >>> > > > > > > > > > >>> > > > > > > > > References > > >>> > > > > > > > > > >>> > > > > > > > > Visible > > links > > >>> > > > > > > > > 1. > > >>> > > > > > > > >>> > > > > > > >>> > > > > > >>> > > > > >>> > > > >>> > > > > [5][6][7][8][9][10][11][12][14]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> > > > > > > > > 2. > > >>> > > > > > > > > >>> > > > > > > > >>> > > > > > > >>> > > > > > >>> > > > > >>> > > > >>> > > > > [6][7][8][9][10][11][12][13][15]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> > > > > > > > > 3. > > >>> > > mailto:[7][8][9][10][11][12][13][14][16]pasik@xxxxxx > > >>> > > > > > > > > >>> > > > > > > References > > >>> > > > > > > > > >>> > > > > > > Visible > links > > >>> > > > > > > 1. > > >>> > > mailto:[9][10][11][12][13][14][15][17]pasik@xxxxxx > > >>> > > > > > > 2. > > >>> > > > > > > > >>> > > > > > > >>> > > > > > >>> > > > > >>> > > > >>> > > > > [10][11][12][13][14][15][16][18]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> > > > > > > 3. > > >>> > > > > > > > >>> > > > > > > >>> > > > > > >>> > > > > >>> > > > >>> > > > > [11][12][13][14][15][16][17][19]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> > > > > > > 4. > > >>> > > mailto:[12][13][14][15][16][17][18][20]pasik@xxxxxx > > >>> > > > > > > 5. > > >>> > > > > > > > >>> > > > > > > >>> > > > > > >>> > > > > >>> > > > >>> > > > > [13][14][15][16][17][18][19][21]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> > > > > > > 6. > > >>> > > > > > > > >>> > > > > > > >>> > > > > > >>> > > > > >>> > > > >>> > > > > [14][15][16][17][18][19][20][22]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> > > > > > > 7. > > >>> > > mailto:[15][16][17][18][19][20][21][23]pasik@xxxxxx > > >>> > > > > > > Asserting > Post > > complete GPIO!!! > > >>> > > > > > > Transfer > control to > > CSM 16-bit > > >>> binary for > > >>> > legacy > > >>> > > boot > > >>> > > > > > > __ __ > > _____ _ _ > > >>> _____ > > >>> > > _ _ > > >>> > > > > > > \ \/ /___ _ > __ > > |___ /| || | > > >>> |___ / > > >>> > _ __ > > >>> > > ___| || | > > >>> > > > _ > > >>> > > > > __ _ > > >>> > > > > > __ ___ > > >>> > > > > > > \ // _ \ > '_ \ > > |_ \| || |_ > > >>> |_ \ __| > > >>> > '__/ > > >>> > > __| || > > >>> > > > |_ __| > > >>> > > > > '_ \| > > >>> > > > > > '__/ _ \ > > >>> > > > > > > / \ __/ > | | | > > ___) |__ _| > > >>> ___) |__| > > >>> > | | > > >>> > > (__|__ > > >>> > > > _|__| > > >>> > > > > |_) | | > > >>> > > > > > | __/ > > >>> > > > > > > > /_/\_\___|_| |_| > > |____(_) > > >>> |_|(_)____/ > > >>> > |_| > > >>> > > \___| |_| > > >>> > > > | > > >>> > > > > .__/|_| > > >>> > > > > > \___| > > >>> > > > > > > > > >>> > > > |_| > > >>> > > > > > > (XEN) Xen > version > > 3.4.3-rc4-pre > > >>> > > (kishore@localdomain) > > >>> > > > (gcc > > >>> > > > > version > > >>> > > > > > 4.1.2 20080704 > (Red > > Hat 4.1.2-46)) > > >>> Mon Mar > > >>> > 15 > > >>> > > 13:44:31 PDT > > >>> > > > 2010 > > >>> > > > > > > (XEN) Latest > > ChangeSet: Tue Mar 09 > > >>> > 18:15:52 2010 > > >>> > > +0000 > > >>> > > > > > > 19924:6e72f8c3c017 > > >>> > > > > > > (XEN) > Command line: > > >>> console=vga,com1 > > >>> > > com1=115200,8n1 > > >>> > > > msi=1 > > >>> > > > > iommu=1 > > >>> > > > > > > (XEN) Video > > information: > > >>> > > > > > > (XEN) VGA > is text > > mode 80x25, font > > >>> 8x16 > > >>> > > > > > > (XEN) > VBE/DDC > > methods: none; EDID > > >>> > transfer time: > > >>> > > 0 > > >>> > > > seconds > > >>> > > > > > > (XEN) EDID > info > > not retrieved > > >>> because no > > >>> > DDC > > >>> > > retrieval > > >>> > > > method > > >>> > > > > > detected > > >>> > > > > > > (XEN) Disc > > information: > > >>> > > > > > > (XEN) Found > 1 MBR > > signatures > > >>> > > > > > > (XEN) Found > 1 EDD > > information > > >>> structures > > >>> > > > > > > (XEN) > Xen-e820 RAM > > map: > > >>> > > > > > > (XEN) > > 0000000000000000 - > > >>> 000000000009d000 > > >>> > > (usable) > > >>> > > > > > > (XEN) > > 000000000009d000 - > > >>> 00000000000a0000 > > >>> > > (reserved) > > >>> > > > > > > (XEN) > > 00000000000e0000 - > > >>> 0000000000100000 > > >>> > > (reserved) > > >>> > > > > > > (XEN) > > 0000000000100000 - > > >>> 000000006d597000 > > >>> > > (usable) > > >>> > > > > > > (XEN) > > 000000006d597000 - > > >>> 000000006d686000 > > >>> > > (reserved) > > >>> > > > > > > (XEN) > > 000000006d686000 - > > >>> 000000006f598000 > > >>> > > (usable) > > >>> > > > > > > (XEN) > > 000000006f598000 - > > >>> 000000006f59a000 > > >>> > > (reserved) > > >>> > > > > > > (XEN) > > 000000006f59a000 - > > >>> 000000006f5af000 > > >>> > (ACPI > > >>> > > NVS) > > >>> > > > > > > (XEN) > > 000000006f5af000 - > > >>> 000000006f5d9000 > > >>> > > (reserved) > > >>> > > > > > > (XEN) > > 000000006f5d9000 - > > >>> 000000006f5f9000 > > >>> > (ACPI > > >>> > > data) > > >>> > > > > > > (XEN) > > 000000006f5f9000 - > > >>> 000000006f6df000 > > >>> > (ACPI > > >>> > > NVS) > > >>> > > > > > > (XEN) > > 000000006f6df000 - > > >>> 000000006f700000 > > >>> > (ACPI > > >>> > > data) > > >>> > > > > > > (XEN) > > 000000006f700000 - > > >>> 0000000080000000 > > >>> > > (reserved) > > >>> > > > > > > (XEN) > > 00000000a0000000 - > > >>> 00000000b0000000 > > >>> > > (reserved) > > >>> > > > > > > (XEN) > > 00000000fc000000 - > > >>> 00000000fd000000 > > >>> > > (reserved) > > >>> > > > > > > (XEN) > > 00000000fed1c000 - > > >>> 00000000fed20000 > > >>> > > (reserved) > > >>> > > > > > > (XEN) > > 00000000ffc00000 - > > >>> 0000000100000000 > > >>> > > (reserved) > > >>> > > > > > > (XEN) System > RAM: > > 1780MB > > >>> (1823000kB) > > >>> > > > > > > (XEN) ACPI: > RSDP > > 000F03F0, 0024 (r2 > > >>> INTEL > > >>> > ) > > >>> > > > > > > (XEN) ACPI: > XSDT > > 6F6FE120, 0064 (r1 > > >>> INTEL > > >>> > THRLY > > >>> > > > 0 > > >>> > > > > > 1000013) > > >>> > > > > > > (XEN) ACPI: > FACP > > 6F6FD000, 00F4 (r4 > > >>> INTEL > > >>> > THRLY > > >>> > > > 0 > > >>> > > > > MSFT > > >>> > > > > > 100000D) > > >>> > > > > > > (XEN) ACPI: > DSDT > > 6F6F5000, 74F1 (r2 > > >>> INTEL > > >>> > THRLY > > >>> > > > 3 > > >>> > > > > MSFT > > >>> > > > > > 100000D) > > >>> > > > > > > (XEN) ACPI: > FACS > > 6F5F9000, 0040 > > >>> > > > > > > (XEN) ACPI: > APIC > > 6F6F4000, 01CC (r2 > > >>> INTEL > > >>> > THRLY > > >>> > > > 0 > > >>> > > > > MSFT > > >>> > > > > > 100000D) > > >>> > > > > > > (XEN) ACPI: > MCFG > > 6F6F3000, 003C (r1 > > >>> INTEL > > >>> > THRLY > > >>> > > > 1 > > >>> > > > > MSFT > > >>> > > > > > 100000D) > > >>> > > > > > > (XEN) ACPI: > HPET > > 6F6F2000, 0038 (r1 > > >>> INTEL > > >>> > THRLY > > >>> > > > 1 > > >>> > > > > MSFT > > >>> > > > > > 100000D) > > >>> > > > > > > (XEN) ACPI: > SLIT > > 6F6F1000, 0030 (r1 > > >>> INTEL > > >>> > THRLY > > >>> > > > 1 > > >>> > > > > MSFT > > >>> > > > > > 100000D) > > >>> > > > > > > (XEN) ACPI: > WDDT > > 6F6F0000, 0040 (r1 > > >>> INTEL > > >>> > THRLY > > >>> > > > 0 > > >>> > > > > MSFT > > >>> > > > > > 100000D) > > >>> > > > > > > (XEN) ACPI: > SSDT > > 6F5D9000, 1FDDC > > >>> (r1 > > >>> > INTEL SSDT > > >>> > > PM > > >>> > > > 4000 > > >>> > > > > INTL > > >>> > > > > > 20061109) > > >>> > > > > > > (XEN) ACPI: > DMAR > > 6F6EE000, 01D0 (r1 > > >>> INTEL > > >>> > THRLY > > >>> > > > 1 > > >>> > > > > MSFT > > >>> > > > > > 100000D) > > >>> > > > > > > (XEN) Domain > heap > > initialised > > >>> > > > > > > (XEN) > Processor #0 > > 6:12 APIC > > >>> version 21 > > >>> > > > > > > (XEN) > Processor #2 > > 6:12 APIC > > >>> version 21 > > >>> > > > > > > (XEN) > Processor #4 > > 6:12 APIC > > >>> version 21 > > >>> > > > > > > (XEN) > Processor #16 > > 6:12 APIC > > >>> version 21 > > >>> > > > > > > (XEN) > Processor #18 > > 6:12 APIC > > >>> version 21 > > >>> > > > > > > (XEN) > Processor #20 > > 6:12 APIC > > >>> version 21 > > >>> > > > > > > (XEN) > Processor #1 > > 6:12 APIC > > >>> version 21 > > >>> > > > > > > (XEN) > Processor #3 > > 6:12 APIC > > >>> version 21 > > >>> > > > > > > (XEN) > Processor #5 > > 6:12 APIC > > >>> version 21 > > >>> > > > > > > (XEN) > Processor #17 > > 6:12 APIC > > >>> version 21 > > >>> > > > > > > (XEN) > Processor #19 > > 6:12 APIC > > >>> version 21 > > >>> > > > > > > (XEN) > Processor #21 > > 6:12 APIC > > >>> version 21 > > >>> > > > > > > (XEN) > IOAPIC[0]: > > apic_id 8, version > > >>> 32, > > >>> > address > > >>> > > > 0xfec00000, GSI > > >>> > > > > 0-23 > > >>> > > > > > > (XEN) > IOAPIC[1]: > > apic_id 9, version > > >>> 32, > > >>> > address > > >>> > > > 0xfec90000, GSI > > >>> > > > > 24-47 > > >>> > > > > > > (XEN) > Enabling APIC > > mode: Phys. > > >>> Using 2 > > >>> > I/O > > >>> > > APICs > > >>> > > > > > > (XEN) Intel > VT-d > > DMAR tables have > > >>> been > > >>> > parsed. > > >>> > > > > > > (XEN) Using > > scheduler: SMP Credit > > >>> > Scheduler > > >>> > > (credit) > > >>> > > > > > > (XEN) > Detected > > 3200.207 MHz > > >>> processor. > > >>> > > > > > > (XEN) VMX: > > Supported advanced > > >>> features: > > >>> > > > > > > (XEN) - > APIC MMIO > > access > > >>> virtualisation > > >>> > > > > > > (XEN) - > APIC TPR > > shadow > > >>> > > > > > > (XEN) - > Extended > > Page Tables (EPT) > > >>> > > > > > > (XEN) - > > Virtual-Processor > > >>> Identifiers > > >>> > (VPID) > > >>> > > > > > > (XEN) - > Virtual > > NMI > > >>> > > > > > > (XEN) - MSR > > direct-access bitmap > > >>> > > > > > > (XEN) VMX: > EPT is > > available. > > >>> > > > > > > (XEN) VMX: > VPID is > > available. > > >>> > > > > > > (XEN) HVM: > VMX > > enabled > > >>> > > > > > > (XEN) HVM: > Hardware > > Assisted Paging > > >>> > detected. > > >>> > > > > > > (XEN) CPU0: > Intel > > Genuine Intel(R) > > >>> CPU > > >>> > > 000 > > >>> > > > @ > > >>> > > > > 3.20GHz > > >>> > > > > > stepping 00 > > >>> > > > > > > (XEN) > Booting > > processor 1/2 eip > > >>> 88000 > > >>> > > > > > > (XEN) CPU1: > Intel > > Genuine Intel(R) > > >>> CPU > > >>> > > 000 > > >>> > > > @ > > >>> > > > > 3.20GHz > > >>> > > > > > stepping 00 > > >>> > > > > > > (XEN) > Booting > > processor 2/4 eip > > >>> 88000 > > >>> > > > > > > (XEN) CPU2: > Intel > > Genuine Intel(R) > > >>> CPU > > >>> > > 000 > > >>> > > > @ > > >>> > > > > 3.20GHz > > >>> > > > > > stepping 00 > > >>> > > > > > > (XEN) > Booting > > processor 3/16 eip > > >>> 88000 > > >>> > > > > > > (XEN) CPU3: > Intel > > Genuine Intel(R) > > >>> CPU > > >>> > > 000 > > >>> > > > @ > > >>> > > > > 3.20GHz > > >>> > > > > > stepping 00 > > >>> > > > > > > (XEN) > Booting > > processor 4/18 eip > > >>> 88000 > > >>> > > > > > > (XEN) CPU4: > Intel > > Genuine Intel(R) > > >>> CPU > > >>> > > 000 > > >>> > > > @ > > >>> > > > > 3.20GHz > > >>> > > > > > stepping 00 > > >>> > > > > > > (XEN) > Booting > > processor 5/20 eip > > >>> 88000 > > >>> > > > > > > (XEN) CPU5: > Intel > > Genuine Intel(R) > > >>> CPU > > >>> > > 000 > > >>> > > > @ > > >>> > > > > 3.20GHz > > >>> > > > > > stepping 00 > > >>> > > > > > > (XEN) > Booting > > processor 6/1 eip > > >>> 88000 > > >>> > > > > > > (XEN) CPU6: > Intel > > Genuine Intel(R) > > >>> CPU > > >>> > > 000 > > >>> > > > @ > > >>> > > > > 3.20GHz > > >>> > > > > > stepping 00 > > >>> > > > > > > (XEN) > Booting > > processor 7/3 eip > > >>> 88000 > > >>> > > > > > > (XEN) CPU7: > Intel > > Genuine Intel(R) > > >>> CPU > > >>> > > 000 > > >>> > > > @ > > >>> > > > > 3.20GHz > > >>> > > > > > stepping 00 > > >>> > > > > > > (XEN) > Booting > > processor 8/5 eip > > >>> 88000 > > >>> > > > > > > (XEN) CPU8: > Intel > > Genuine Intel(R) > > >>> CPU > > >>> > > 000 > > >>> > > > @ > > >>> > > > > 3.20GHz > > >>> > > > > > stepping 00 > > >>> > > > > > > (XEN) > Booting > > processor 9/17 eip > > >>> 88000 > > >>> > > > > > > (XEN) CPU9: > Intel > > Genuine Intel(R) > > >>> CPU > > >>> > > 000 > > >>> > > > @ > > >>> > > > > 3.20GHz > > >>> > > > > > stepping 00 > > >>> > > > > > > (XEN) > Booting > > processor 10/19 eip > > >>> 88000 > > >>> > > > > > > (XEN) CPU10: > Intel > > Genuine Intel(R) > > >>> CPU > > >>> > > 000 > > >>> > > > @ > > >>> > > > > 3.20GHz > > >>> > > > > > stepping 00 > > >>> > > > > > > (XEN) > Booting > > processor 11/21 eip > > >>> 88000 > > >>> > > > > > > (XEN) CPU11: > Intel > > Genuine Intel(R) > > >>> CPU > > >>> > > 000 > > >>> > > > @ > > >>> > > > > 3.20GHz > > >>> > > > > > stepping 00 > > >>> > > > > > > (XEN) Total > of 12 > > processors > > >>> activated. > > >>> > > > > > > (XEN) > ENABLING > > IO-APIC IRQs > > >>> > > > > > > (XEN) -> > Using > > new ACK method > > >>> > > > > > > (XEN) > checking TSC > > synchronization > > >>> across > > >>> > 12 > > >>> > > CPUs: > > >>> > > > passed. > > >>> > > > > > > (XEN) > Platform > > timer is 14.318MHz > > >>> HPET > > >>> > > > > > > ?(XEN) > Brought up > > 12 CPUs > > >>> > > > > > > (XEN) Intel > VT-d > > Snoop Control > > >>> supported. > > >>> > > > > > > (XEN) Intel > VT-d > > DMA Passthrough > > >>> not > > >>> > supported. > > >>> > > > > > > (XEN) Intel > VT-d > > Queued > > >>> Invalidation > > >>> > supported. > > >>> > > > > > > (XEN) Intel > VT-d > > Interrupt > > >>> Remapping > > >>> > supported. > > >>> > > > > > > (XEN) I/O > > virtualisation enabled > > >>> > > > > > > (XEN) I/O > > virtualisation for PV > > >>> guests > > >>> > disabled > > >>> > > > > > > (XEN) > xenoprof: > > Initialization > > >>> failed. > > >>> > Intel > > >>> > > processor > > >>> > > > model 44 > > >>> > > > > for P6 > > >>> > > > > > class family is > not > > supported > > >>> > > > > > > (XEN) *** > LOADING > > DOMAIN 0 *** > > >>> > > > > > > (XEN) Xen > kernel: > > 64-bit, lsb, > > >>> compat32 > > >>> > > > > > > (XEN) Dom0 > kernel: > > 64-bit, PAE, > > >>> lsb, > > >>> > paddr > > >>> > > 0x1000000 -> > > >>> > > > > 0x26bb000 > > >>> > > > > > > (XEN) > PHYSICAL > > MEMORY ARRANGEMENT: > > >>> > > > > > > (XEN) Dom0 > alloc.: > > >>> > > 0000000064000000->0000000068000000 > > >>> > > > > (404490 pages > > >>> > > > > > to be > allocated) > > >>> > > > > > > (XEN) > VIRTUAL > > MEMORY ARRANGEMENT: > > >>> > > > > > > (XEN) > Loaded > > kernel: > > >>> > > ffffffff81000000->ffffffff826bb000 > > >>> > > > > > > (XEN) Init. > > ramdisk: > > >>> > > ffffffff826bb000->ffffffff82d0d800 > > >>> > > > > > > (XEN) > Phys-Mach > > map: > > >>> > > ffffffff82d0e000->ffffffff83044050 > > >>> > > > > > > (XEN) Start > info: > > >>> > > ffffffff83045000->ffffffff830454b4 > > >>> > > > > > > (XEN) Page > tables: > > >>> > > ffffffff83046000->ffffffff83063000 > > >>> > > > > > > (XEN) Boot > stack: > > >>> > > ffffffff83063000->ffffffff83064000 > > >>> > > > > > > (XEN) > TOTAL: > > >>> > > ffffffff80000000->ffffffff83400000 > > >>> > > > > > > (XEN) ENTRY > > ADDRESS: > > >>> ffffffff819c1200 > > >>> > > > > > > (XEN) Dom0 > has > > maximum 12 VCPUs > > >>> > > > > > > (XEN) > Scrubbing > > Free RAM: .done. > > >>> > > > > > > (XEN) Xen > trace > > buffers: disabled > > >>> > > > > > > (XEN) Std. > > Loglevel: Errors and > > >>> warnings > > >>> > > > > > > (XEN) Guest > > Loglevel: Nothing > > >>> > (Rate-limited: > > >>> > > Errors and > > >>> > > > > warnings) > > >>> > > > > > > (XEN) Xen is > > relinquishing VGA > > >>> console. > > >>> > > > > > > (XEN) *** > Serial > > input -> DOM0 > > >>> (type > > >>> > 'CTRL-a' > > >>> > > three > > >>> > > > times to > > >>> > > > > switch > > >>> > > > > > input to Xen) > > >>> > > > > > > (XEN) Freed > 128kB > > init memory. > > >>> > > > > > > mapping > kernel into > > physical memory > > >>> > > > > > > Xen: setup > ISA > > identity maps > > >>> > > > > > > about to get > > started... > > >>> > > > > > > Initializing > cgroup > > subsys cpuset > > >>> > > > > > > Initializing > cgroup > > subsys cpu > > >>> > > > > > > Linux > version > > 2.6.32.9 > > >>> > > (kishore@xxxxxxxxxxxxxxxxxxxxx) > > >>> > > > (gcc > > >>> > > > > version > > >>> > > > > > 4.1.2 20080704 > (Red > > Hat 4.1.2-46)) #1 > > >>> SMP > > >>> > Mon Mar > > >>> > > 15 > > >>> > > > 15:16:28 PDT > > >>> > > > > 2010 > > >>> > > > > > > Command > line: ro > > >>> > root=/dev/VolGroup01/LogVol00 > > >>> > > > console=hvc0 > > >>> > > > > > earlyprintk=xen > > nomodeset > > >>> > > > > > > KERNEL > supported > > cpus: > > >>> > > > > > > Intel > > GenuineIntel > > >>> > > > > > > AMD > AuthenticAMD > > >>> > > > > > > Centaur > > CentaurHauls > > >>> > > > > > > > BIOS-provided > > physical RAM map: > > >>> > > > > > > Xen: > > 0000000000000000 - > > >>> 000000000009d000 > > >>> > > (usable) > > >>> > > > > > > Xen: > > 000000000009d000 - > > >>> 0000000000100000 > > >>> > > (reserved) > > >>> > > > > > > Xen: > > 0000000000100000 - > > >>> 0000000066c0a000 > > >>> > > (usable) > > >>> > > > > > > Xen: > > 000000006d597000 - > > >>> 000000006d686000 > > >>> > > (reserved) > > >>> > > > > > > Xen: > > 000000006f598000 - > > >>> 000000006f59a000 > > >>> > > (reserved) > > >>> > > > > > > Xen: > > 000000006f59a000 - > > >>> 000000006f5af000 > > >>> > (ACPI > > >>> > > NVS) > > >>> > > > > > > Xen: > > 000000006f5af000 - > > >>> 000000006f5d9000 > > >>> > > (reserved) > > >>> > > > > > > Xen: > > 000000006f5d9000 - > > >>> 000000006f5f9000 > > >>> > (ACPI > > >>> > > data) > > >>> > > > > > > Xen: > > 000000006f5f9000 - > > >>> 000000006f6df000 > > >>> > (ACPI > > >>> > > NVS) > > >>> > > > > > > Xen: > > 000000006f6df000 - > > >>> 000000006f700000 > > >>> > (ACPI > > >>> > > data) > > >>> > > > > > > Xen: > > 000000006f700000 - > > >>> 0000000080000000 > > >>> > > (reserved) > > >>> > > > > > > Xen: > > 00000000a0000000 - > > >>> 00000000b0000000 > > >>> > > (reserved) > > >>> > > > > > > Xen: > > 00000000fc000000 - > > >>> 00000000fd000000 > > >>> > > (reserved) > > >>> > > > > > > Xen: > > 00000000fed1c000 - > > >>> 00000000fed20000 > > >>> > > (reserved) > > >>> > > > > > > Xen: > > 00000000ffc00000 - > > >>> 0000000100000000 > > >>> > > (reserved) > > >>> > > > > > > bootconsole > > [xenboot0] enabled > > >>> > > > > > > DMI 2.4 > present. > > >>> > > > > > > last_pfn = > 0x66c0a > > max_arch_pfn = > > >>> > 0x400000000 > > >>> > > > > > > > > init_memory_mapping: > > >>> > > 0000000000000000-0000000066c0a000 > > >>> > > > > > > RAMDISK: > 026bb000 - > > 02d0d800 > > >>> > > > > > > ACPI: RSDP > > 00000000000f03f0 00024 > > >>> (v02 > > >>> > INTEL ) > > >>> > > > > > > ACPI: XSDT > > 000000006f6fe120 00064 > > >>> (v01 > > >>> > INTEL > > >>> > > THRLY > > >>> > > > 00000000 > > >>> > > > > > 01000013) > > >>> > > > > > > ACPI: FACP > > 000000006f6fd000 000F4 > > >>> (v04 > > >>> > INTEL > > >>> > > THRLY > > >>> > > > 00000000 > > >>> > > > > MSFT > > >>> > > > > > 0100000D) > > >>> > > > > > > ACPI: DSDT > > 000000006f6f5000 074F1 > > >>> (v02 > > >>> > INTEL > > >>> > > THRLY > > >>> > > > 00000003 > > >>> > > > > MSFT > > >>> > > > > > 0100000D) > > >>> > > > > > > ACPI: FACS > > 000000006f5f9000 00040 > > >>> > > > > > > ACPI: APIC > > 000000006f6f4000 001CC > > >>> (v02 > > >>> > INTEL > > >>> > > THRLY > > >>> > > > 00000000 > > >>> > > > > MSFT > > >>> > > > > > 0100000D) > > >>> > > > > > > ACPI: MCFG > > 000000006f6f3000 0003C > > >>> (v01 > > >>> > INTEL > > >>> > > THRLY > > >>> > > > 00000001 > > >>> > > > > MSFT > > >>> > > > > > 0100000D) > > >>> > > > > > > ACPI: HPET > > 000000006f6f2000 00038 > > >>> (v01 > > >>> > INTEL > > >>> > > THRLY > > >>> > > > 00000001 > > >>> > > > > MSFT > > >>> > > > > > 0100000D) > > >>> > > > > > > ACPI: SLIT > > 000000006f6f1000 00030 > > >>> (v01 > > >>> > INTEL > > >>> > > THRLY > > >>> > > > 00000001 > > >>> > > > > MSFT > > >>> > > > > > 0100000D) > > >>> > > > > > > ACPI: WDDT > > 000000006f6f0000 00040 > > >>> (v01 > > >>> > INTEL > > >>> > > THRLY > > >>> > > > 00000000 > > >>> > > > > MSFT > > >>> > > > > > 0100000D) > > >>> > > > > > > ACPI: SSDT > > 000000006f5d9000 1FDDC > > >>> (v01 > > >>> > INTEL > > >>> > > SSDT PM > > >>> > > > 00004000 > > >>> > > > > INTL > > >>> > > > > > 20061109) > > >>> > > > > > > ACPI: > > 000000006f6ee000 001D0 > > >>> (v01 > > >>> > INTEL > > >>> > > THRLY > > >>> > > > 00000001 > > >>> > > > > MSFT > > >>> > > > > > 0100000D) > > >>> > > > > > > No NUMA > > configuration found > > >>> > > > > > > Faking a > node at > > >>> > > 0000000000000000-0000000066c0a000 > > >>> > > > > > > Bootmem > setup node > > 0 > > >>> > > 0000000000000000-0000000066c0a000 > > >>> > > > > > > NODE_DATA > > [0000000000008000 - > > >>> > 000000000001ffff] > > >>> > > > > > > bootmap > > [0000000000020000 - > > >>> > 000000000002cd87] > > >>> > > pages d > > >>> > > > > > > (9 early > > reservations) ==> bootmem > > >>> > [0000000000 - > > >>> > > > 0066c0a000] > > >>> > > > > > > #0 > [0000000000 - > > 0000001000] > > >>> BIOS data > > >>> > page > > >>> > > ==> > > >>> > > > [0000000000 > > >>> > > > > - > > >>> > > > > > 0000001000] > > >>> > > > > > > #1 > [0003046000 - > > 0003063000] > > >>> XEN > > >>> > PAGETABLES > > >>> > > ==> > > >>> > > > [0003046000 > > >>> > > > > - > > >>> > > > > > 0003063000] > > >>> > > > > > > #2 > [0000006000 - > > 0000008000] > > >>> > TRAMPOLINE > > >>> > > ==> > > >>> > > > [0000006000 > > >>> > > > > - > > >>> > > > > > 0000008000] > > >>> > > > > > > #3 > [0001000000 - > > 000269ae98] > > >>> TEXT > > >>> > DATA BSS > > >>> > > ==> > > >>> > > > [0001000000 > > >>> > > > > - > > >>> > > > > > 000269ae98] > > >>> > > > > > > #4 > [00026bb000 - > > 0002d0d800] > > >>> > RAMDISK > > >>> > > ==> > > >>> > > > [00026bb000 > > >>> > > > > - > > >>> > > > > > 0002d0d800] > > >>> > > > > > > #5 > [0002d0e000 - > > 0003046000] > > >>> XEN START > > >>> > INFO > > >>> > > ==> > > >>> > > > [0002d0e000 > > >>> > > > > - > > >>> > > > > > 0003046000] > > >>> > > > > > > #6 > [000269b000 - > > 000269b011] > > >>> > BRK > > >>> > > ==> > > >>> > > > [000269b000 > > >>> > > > > - > > >>> > > > > > 000269b011] > > >>> > > > > > > #7 > [0000100000 - > > 000041a000] > > >>> > PGTABLE > > >>> > > ==> > > >>> > > > [0000100000 > > >>> > > > > - > > >>> > > > > > 000041a000] > > >>> > > > > > > #8 > [0000001000 - > > 0000001030] > > >>> ACPI > > >>> > SLIT > > >>> > > ==> > > >>> > > > [0000001000 > > >>> > > > > - > > >>> > > > > > 0000001030] > > >>> > > > > > > found SMP > MP-table > > at > > >>> [ffff8800000fd750] > > >>> > fd750 > > >>> > > > > > > Zone PFN > ranges: > > >>> > > > > > > DMA > > 0x00000000 -> 0x00001000 > > >>> > > > > > > DMA32 > > 0x00001000 -> 0x00100000 > > >>> > > > > > > Normal > > 0x00100000 -> 0x00100000 > > >>> > > > > > > Movable zone > start > > PFN for each > > >>> node > > >>> > > > > > > > early_node_map[2] > > active PFN ranges > > >>> > > > > > > 0: > 0x00000000 > > -> 0x0000009d > > >>> > > > > > > 0: > 0x00000100 > > -> 0x00066c0a > > >>> > > > > > > ACPI: > PM-Timer IO > > Port: 0x408 > > >>> > > > > > > ACPI: LAPIC > > (acpi_id[0x00] > > >>> lapic_id[0x00] > > >>> > > enabled) > > >>> > > > > > > ACPI: LAPIC > > (acpi_id[0x01] > > >>> lapic_id[0x02] > > >>> > > enabled) > > >>> > > > > > > ACPI: LAPIC > > (acpi_id[0x02] > > >>> lapic_id[0x04] > > >>> > > enabled) > > >>> > > > > > > ACPI: LAPIC > > (acpi_id[0x03] > > >>> lapic_id[0x10] > > >>> > > enabled) > > >>> > > > > > > ACPI: LAPIC > > (acpi_id[0x04] > > >>> lapic_id[0x12] > > >>> > > enabled) > > >>> > > > > > > ACPI: LAPIC > > (acpi_id[0x05] > > >>> lapic_id[0x14] > > >>> > > enabled) > > >>> > > > > > > ACPI: LAPIC > > (acpi_id[0x06] > > >>> lapic_id[0x01] > > >>> > > enabled) > > >>> > > > > > > ACPI: LAPIC > > (acpi_id[0x07] > > >>> lapic_id[0x03] > > >>> > > enabled) > > >>> > > > > > > ACPI: LAPIC > > (acpi_id[0x08] > > >>> lapic_id[0x05] > > >>> > > enabled) > > >>> > > > > > > ACPI: LAPIC > > (acpi_id[0x09] > > >>> lapic_id[0x11] > > >>> > > enabled) > > >>> > > > > > > ACPI: LAPIC > > (acpi_id[0x0a] > > >>> lapic_id[0x13] > > >>> > > enabled) > > >>> > > > > > > ACPI: LAPIC > > (acpi_id[0x0b] > > >>> lapic_id[0x15] > > >>> > > enabled) > > >>> > > > > > > ACPI: LAPIC > > (acpi_id[0x0c] > > >>> lapic_id[0xff] > > >>> > > disabled) > > >>> > > > > > > ACPI: LAPIC > > (acpi_id[0x0d] > > >>> lapic_id[0xff] > > >>> > > disabled) > > >>> > > > > > > ACPI: LAPIC > > (acpi_id[0x0e] > > >>> lapic_id[0xff] > > >>> > > disabled) > > >>> > > > > > > ACPI: LAPIC > > (acpi_id[0x0f] > > >>> lapic_id[0xff] > > >>> > > disabled) > > >>> > > > > > > ACPI: LAPIC > > (acpi_id[0x10] > > >>> lapic_id[0xff] > > >>> > > disabled) > > >>> > > > > > > ACPI: LAPIC > > (acpi_id[0x11] > > >>> lapic_id[0xff] > > >>> > > disabled) > > >>> > > > > > > ACPI: LAPIC > > (acpi_id[0x12] > > >>> lapic_id[0xff] > > >>> > > disabled) > > >>> > > > > > > ACPI: LAPIC > > (acpi_id[0x13] > > >>> lapic_id[0xff] > > >>> > > disabled) > > >>> > > > > > > ACPI: LAPIC > > (acpi_id[0x14] > > >>> lapic_id[0xff] > > >>> > > disabled) > > >>> > > > > > > ACPI: LAPIC > > (acpi_id[0x15] > > >>> lapic_id[0xff] > > >>> > > disabled) > > >>> > > > > > > ACPI: LAPIC > > (acpi_id[0x16] > > >>> lapic_id[0xff] > > >>> > > disabled) > > >>> > > > > > > ACPI: LAPIC > > (acpi_id[0x17] > > >>> lapic_id[0xff] > > >>> > > disabled) > > >>> > > > > > > ACPI: > LAPIC_NMI > > (acpi_id[0x00] high > > >>> level > > >>> > > lint[0x1]) > > >>> > > > > > > ACPI: > LAPIC_NMI > > (acpi_id[0x01] high > > >>> level > > >>> > > lint[0x1]) > > >>> > > > > > > ACPI: > LAPIC_NMI > > (acpi_id[0x02] high > > >>> level > > >>> > > lint[0x1]) > > >>> > > > > > > ACPI: > LAPIC_NMI > > (acpi_id[0x03] high > > >>> level > > >>> > > lint[0x1]) > > >>> > > > > > > ACPI: > LAPIC_NMI > > (acpi_id[0x04] high > > >>> level > > >>> > > lint[0x1]) > > >>> > > > > > > ACPI: > LAPIC_NMI > > (acpi_id[0x05] high > > >>> level > > >>> > > lint[0x1]) > > >>> > > > > > > ACPI: > LAPIC_NMI > > (acpi_id[0x06] high > > >>> level > > >>> > > lint[0x1]) > > >>> > > > > > > ACPI: > LAPIC_NMI > > (acpi_id[0x07] high > > >>> level > > >>> > > lint[0x1]) > > >>> > > > > > > ACPI: > LAPIC_NMI > > (acpi_id[0x08] high > > >>> level > > >>> > > lint[0x1]) > > >>> > > > > > > ACPI: > LAPIC_NMI > > (acpi_id[0x09] high > > >>> level > > >>> > > lint[0x1]) > > >>> > > > > > > ACPI: > LAPIC_NMI > > (acpi_id[0x0a] high > > >>> level > > >>> > > lint[0x1]) > > >>> > > > > > > ACPI: > LAPIC_NMI > > (acpi_id[0x0b] high > > >>> level > > >>> > > lint[0x1]) > > >>> > > > > > > ACPI: > LAPIC_NMI > > (acpi_id[0x0c] high > > >>> level > > >>> > > lint[0x1]) > > >>> > > > > > > ACPI: > LAPIC_NMI > > (acpi_id[0x0d] high > > >>> level > > >>> > > lint[0x1]) > > >>> > > > > > > ACPI: > LAPIC_NMI > > (acpi_id[0x0e] high > > >>> level > > >>> > > lint[0x1]) > > >>> > > > > > > ACPI: > LAPIC_NMI > > (acpi_id[0x0f] high > > >>> level > > >>> > > lint[0x1]) > > >>> > > > > > > ACPI: > LAPIC_NMI > > (acpi_id[0x10] high > > >>> level > > >>> > > lint[0x1]) > > >>> > > > > > > ACPI: > LAPIC_NMI > > (acpi_id[0x11] high > > >>> level > > >>> > > lint[0x1]) > > >>> > > > > > > ACPI: > LAPIC_NMI > > (acpi_id[0x12] high > > >>> level > > >>> > > lint[0x1]) > > >>> > > > > > > ACPI: > LAPIC_NMI > > (acpi_id[0x13] high > > >>> level > > >>> > > lint[0x1]) > > >>> > > > > > > ACPI: > LAPIC_NMI > > (acpi_id[0x14] high > > >>> level > > >>> > > lint[0x1]) > > >>> > > > > > > ACPI: > LAPIC_NMI > > (acpi_id[0x15] high > > >>> level > > >>> > > lint[0x1]) > > >>> > > > > > > ACPI: > LAPIC_NMI > > (acpi_id[0x16] high > > >>> level > > >>> > > lint[0x1]) > > >>> > > > > > > ACPI: > LAPIC_NMI > > (acpi_id[0x17] high > > >>> level > > >>> > > lint[0x1]) > > >>> > > > > > > ACPI: IOAPIC > > (id[0x08] > > >>> address[0xfec00000] > > >>> > > gsi_base[0]) > > >>> > > > > > > IOAPIC[0]: > apic_id > > 8, version 0, > > >>> address > > >>> > > 0xfec00000, GSI > > >>> > > > 0-0 > > >>> > > > > > > ACPI: IOAPIC > > (id[0x09] > > >>> address[0xfec90000] > > >>> > > gsi_base[24]) > > >>> > > > > > > IOAPIC[1]: > apic_id > > 9, version 0, > > >>> address > > >>> > > 0xfec90000, GSI > > >>> > > > 24-24 > > >>> > > > > > > ACPI: > INT_SRC_OVR > > (bus 0 bus_irq 0 > > >>> > global_irq 2 > > >>> > > dfl dfl) > > >>> > > > > > > ERROR: > Unable to > > locate IOAPIC for > > >>> GSI 2 > > >>> > > > > > > ACPI: > INT_SRC_OVR > > (bus 0 bus_irq 9 > > >>> > global_irq 9 > > >>> > > high > > >>> > > > level) > > >>> > > > > > > ERROR: > Unable to > > locate IOAPIC for > > >>> GSI 9 > > >>> > > > > > > Using ACPI > (MADT) > > for SMP > > >>> configuration > > >>> > > information > > >>> > > > > > > ACPI: HPET > id: > > 0x8086a401 base: > > >>> 0xfed00000 > > >>> > > > > > > SMP: > Allowing 12 > > CPUs, 0 hotplug > > >>> CPUs > > >>> > > > > > > PM: > Registered > > nosave memory: > > >>> > 000000000009d000 - > > >>> > > > > 0000000000100000 > > >>> > > > > > > Allocating > PCI > > resources starting > > >>> at > > >>> > b0000000 > > >>> > > (gap: > > >>> > > > > b0000000:4c000000) > > >>> > > > > > > Booting > > paravirtualized kernel on > > >>> Xen > > >>> > > > > > > Xen version: > > 3.4.3-rc4-pre > > >>> (preserve-AD) > > >>> > (dom0) > > >>> > > > > > > NR_CPUS:512 > > nr_cpumask_bits:512 > > >>> > nr_cpu_ids:12 > > >>> > > > nr_node_ids:1 > > >>> > > > > > > PERCPU: > Embedded > > 478 pages/cpu > > >>> > @ffff880005ebc000 > > >>> > > > s1928024 r8192 > > >>> > > > > d21672 > > >>> > > > > > u1957888 > > >>> > > > > > > pcpu-alloc: > > s1928024 r8192 d21672 > > >>> u1957888 > > >>> > > > alloc=478*4096 > > >>> > > > > > > pcpu-alloc: > [0] 00 > > [0] 01 [0] 02 > > >>> [0] 03 > > >>> > [0] 04 > > >>> > > [0] 05 > > >>> > > > [0] 06 > > >>> > > > > [0] 07 > > >>> > > > > > > pcpu-alloc: > [0] 08 > > [0] 09 [0] 10 > > >>> [0] 11 > > >>> > > > > > > Xen: using > > vcpu_info placement > > >>> > > > > > > Built 1 > zonelists > > in Node order, > > >>> mobility > > >>> > > grouping on. > > >>> > > > Total > > >>> > > > > pages: > > >>> > > > > > 409291 > > >>> > > > > > > Policy zone: > DMA32 > > >>> > > > > > > Kernel > command > > line: ro > > >>> > > root=/dev/VolGroup01/LogVol00 > > >>> > > > > console=hvc0 > > >>> > > > > > earlyprintk=xen > > nomodeset > > >>> > > > > > > PID hash > table > > entries: 4096 > > >>> (order: 3, > > >>> > 32768 > > >>> > > bytes) > > >>> > > > > > > Initializing > CPU#0 > > >>> > > > > > > DMA: Placing > 64MB > > software IO TLB > > >>> between > > >>> > > > ffff880007525000 - > > >>> > > > > > > ffff88000b525000 > > >>> > > > > > > DMA: > software IO > > TLB at phys > > >>> 0x7525000 - > > >>> > > 0xb525000 > > >>> > > > > > > > xen_swiotlb_fixup: > > >>> buf=ffff880007525000 > > >>> > > size=67108864 > > >>> > > > > > > > xen_swiotlb_fixup: > > >>> buf=ffff88000b585000 > > >>> > > size=32768 > > >>> > > > > > > Memory: > > 1514268k/1683496k available > > >>> (4654k > > >>> > kernel > > >>> > > code, > > >>> > > > 396k > > >>> > > > > absent, > > >>> > > > > > 168832k > reserved, > > 3443k data, 3396k > > >>> init) > > >>> > > > > > > SLUB: > Genslabs=14, > > HWalign=64, > > >>> Order=0-3, > > >>> > > MinObjects=0, > > >>> > > > > CPUs=12, > > >>> > > > > > Nodes=1 > > >>> > > > > > > Hierarchical > RCU > > implementation. > > >>> > > > > > > NR_IRQS:4352 > > nr_irqs:3072 > > >>> > > > > > > Already > setup the > > GSI :0 > > >>> > > > > > > Already > setup the > > GSI :1 > > >>> > > > > > > Already > setup the > > GSI :2 > > >>> > > > > > > Already > setup the > > GSI :3 > > >>> > > > > > > Already > setup the > > GSI :4 > > >>> > > > > > > Already > setup the > > GSI :5 > > >>> > > > > > > Already > setup the > > GSI :6 > > >>> > > > > > > Already > setup the > > GSI :7 > > >>> > > > > > > Already > setup the > > GSI :8 > > >>> > > > > > > Already > setup the > > GSI :9 > > >>> > > > > > > Already > setup the > > GSI :10 > > >>> > > > > > > Already > setup the > > GSI :11 > > >>> > > > > > > Already > setup the > > GSI :12 > > >>> > > > > > > Already > setup the > > GSI :13 > > >>> > > > > > > Already > setup the > > GSI :14 > > >>> > > > > > > Already > setup the > > GSI :15 > > >>> > > > > > > ACPI: > INT_SRC_OVR > > (bus 0 bus_irq 0 > > >>> > global_irq 2 > > >>> > > dfl dfl) > > >>> > > > > > > ACPI: > INT_SRC_OVR > > (bus 0 bus_irq 9 > > >>> > global_irq 9 > > >>> > > high > > >>> > > > level) > > >>> > > > > > > xen: sci > override: > > source_irq=9 > > >>> > global_irq=9 > > >>> > > trigger=c > > >>> > > > > polarity=1 > > >>> > > > > > > > xen_allocate_pirq: > > returning irq 9 > > >>> for gsi > > >>> > 9 > > >>> > > > > > > Already > setup the > > GSI :9 > > >>> > > > > > > xen: acpi > sci 9 > > >>> > > > > > > Console: > colour > > VGA+ 80x25 > > >>> > > > > > > console > [hvc0] > > enabled, bootconsole > > >>> > disabled > > >>> > > console > > >>> > > > [hvc0] > > >>> > > > > enabled, > > >>> > > > > > bootconsole > disabled > > >>> > > > > > > Lock > dependency > > validator: > > >>> Copyright (c) > > >>> > 2006 Red > > >>> > > Hat, > > >>> > > > Inc., > > >>> > > > > Ingo > > >>> > > > > > Molnar ... > > MAX_LOCKDEP_SUBCLASSES: 8 > > >>> ... > > >>> > > MAX_LOCK_DEPTH: > > >>> > > > > 48 > > >>> > > > > > ... > MAX_LOCKDEP_KEYS: > > 8191 ... > > >>> > > CLASSHASH_SIZE: > > >>> > > > > 4096 ... > > >>> > > > > > > MAX_LOCKDEP_ENTRIES: > > 16384 ... > > >>> > > MAX_LOCKDEP_CHAINS: > > >>> > > > 32768 > > >>> > > > > ... > > >>> > > > > > CHAINHASH_SIZE: > > 16384 > > >>> memory used > > >>> > by lock > > >>> > > > dependency > > >>> > > > > info: > > >>> > > > > > 6367 kB per > > task-struct memory > > >>> footprint: > > >>> > 2688 > > >>> > > bytes > > >>> > > > allocated > > >>> > > > > 17039360 > > >>> > > > > > bytes of > page_cgroup > > please try > > >>> > > 'cgroup_disable=memory' > > >>> > > > option if > > >>> > > > > you > > >>> > > > > > don't want > memory > > cgroups installing > > >>> Xen > > >>> > timer for > > >>> > > CPU 0 > > >>> > > > Detected > > >>> > > > > > 3200.206 MHz > > processor. Calibrating > > >>> delay > > >>> > loop > > >>> > > (skipped), > > >>> > > > value > > >>> > > > > > calculated > using timer > > frequency.. > > >>> 6400.41 > > >>> > BogoMIPS > > >>> > > > (lpj=3200206) > > >>> > > > > > Security > Framework > > initialized > > >>> SELinux: > > >>> > > Initializing. > > >>> > > > Dentry > > >>> > > > > cache hash > > >>> > > > > > table entries: > 262144 > > (order: 9, > > >>> 2097152 > > >>> > bytes) > > >>> > > > Inode-cache hash > > >>> > > > > table > > >>> > > > > > entries: 131072 > > (order: 8, 1048576 > > >>> bytes) > > >>> > > Mount-cache hash > > >>> > > > table > > >>> > > > > > entries: 256 > > Initializing cgroup > > >>> subsys ns > > >>> > > Initializing > > >>> > > > cgroup > > >>> > > > > subsys > > >>> > > > > > cpuacct > Initializing > > cgroup subsys > > >>> memory > > >>> > > Initializing > > >>> > > > cgroup > > >>> > > > > subsys > > >>> > > > > > devices > Initializing > > cgroup subsys > > >>> freezer > > >>> > > Initializing > > >>> > > > cgroup > > >>> > > > > subsys > > >>> > > > > > net_cls CPU: L1 > I > > cache: 32K, L1 D > > >>> cache: > > >>> > 32K CPU: > > >>> > > L2 > > >>> > > > cache: 256K > > >>> > > > > CPU: > > >>> > > > > > L3 cache: > 12288K CPU > > 0/0x0 -> Node 0 > > >>> CPU: > > >>> > > Unsupported > > >>> > > > number of > > >>> > > > > siblings > > >>> > > > > > 32 Performance > Events: > > unsupported p6 > > >>> CPU > > >>> > model 44 > > >>> > > no PMU > > >>> > > > driver, > > >>> > > > > > software events > only. > > lockdep: fixing > > >>> up > > >>> > > alternatives. SMP > > >>> > > > > alternatives: > > >>> > > > > > switching to UP > code > > ACPI: Core > > >>> revision > > >>> > 20090903 > > >>> > > ftrace: > > >>> > > > > converting > > >>> > > > > > mcount calls to > 0f 1f > > 44 00 00 > > >>> ftrace: > > >>> > allocating > > >>> > > 27971 > > >>> > > > entries > > >>> > > > > in 110 > > >>> > > > > > pages > installing Xen > > timer for CPU 1 > > >>> > lockdep: > > >>> > > fixing up > > >>> > > > > alternatives. > > >>> > > > > > SMP > alternatives: > > switching to SMP > > >>> code > > >>> > > Initializing CPU#1 > > >>> > > > CPU: > > >>> > > > > L1 I > > >>> > > > > > cache: 32K, L1 > D > > cache: 32K CPU: L2 > > >>> cache: > > >>> > 256K > > >>> > > CPU: L3 > > >>> > > > cache: > > >>> > > > > 12288K > > >>> > > > > > CPU 1/0x0 -> > Node 0 > > CPU: Unsupported > > >>> number > > >>> > of > > >>> > > siblings 32 > > >>> > > > > installing > > >>> > > > > > Xen timer for > CPU 2 > > Initializing > > >>> CPU#2 CPU: > > >>> > L1 I > > >>> > > cache: > > >>> > > > 32K, L1 D > > >>> > > > > cache: > > >>> > > > > > 32K CPU: L2 > cache: > > 256K CPU: L3 > > >>> cache: > > >>> > 12288K CPU > > >>> > > 2/0x0 -> > > >>> > > > Node 0 > > >>> > > > > CPU: > > >>> > > > > > Unsupported > number of > > siblings 32 > > >>> installing > > >>> > Xen > > >>> > > timer for > > >>> > > > CPU 3 > > >>> > > > > > Initializing > CPU#3 > > CPU: L1 I cache: > > >>> 32K, L1 > > >>> > D > > >>> > > cache: 32K > > >>> > > > CPU: L2 > > >>> > > > > cache: > > >>> > > > > > 256K CPU: L3 > cache: > > 12288K CPU 3/0x0 > > >>> -> Node > > >>> > 0 CPU: > > >>> > > > Unsupported > > >>> > > > > number > > >>> > > > > > of siblings 32 > > installing Xen timer > > >>> for CPU > > >>> > 4 > > >>> > > Initializing > > >>> > > > CPU#4 > > >>> > > > > CPU: L1 > > >>> > > > > > I cache: 32K, > L1 D > > cache: 32K CPU: L2 > > >>> cache: > > >>> > 256K > > >>> > > CPU: L3 > > >>> > > > cache: > > >>> > > > > 12288K > > >>> > > > > > CPU 4/0x0 -> > Node 0 > > CPU: Unsupported > > >>> number > > >>> > of > > >>> > > siblings 32 > > >>> > > > > installing > > >>> > > > > > Xen timer for > CPU 5 > > Initializing > > >>> CPU#5 CPU: > > >>> > L1 I > > >>> > > cache: > > >>> > > > 32K, L1 D > > >>> > > > > cache: > > >>> > > > > > 32K CPU: L2 > cache: > > 256K CPU: L3 > > >>> cache: > > >>> > 12288K CPU > > >>> > > 5/0x0 -> > > >>> > > > Node 0 > > >>> > > > > CPU: > > >>> > > > > > Unsupported > number of > > siblings 32 > > >>> installing > > >>> > Xen > > >>> > > timer for > > >>> > > > CPU 6 > > >>> > > > > > Initializing > CPU#6 > > CPU: L1 I cache: > > >>> 32K, L1 > > >>> > D > > >>> > > cache: 32K > > >>> > > > CPU: L2 > > >>> > > > > cache: > > >>> > > > > > 256K CPU: L3 > cache: > > 12288K CPU 6/0x0 > > >>> -> Node > > >>> > 0 CPU: > > >>> > > > Unsupported > > >>> > > > > number > > >>> > > > > > of siblings 32 > > installing Xen timer > > >>> for CPU > > >>> > 7 > > >>> > > Initializing > > >>> > > > CPU#7 > > >>> > > > > CPU: L1 > > >>> > > > > > I cache: 32K, > L1 D > > cache: 32K CPU: L2 > > >>> cache: > > >>> > 256K > > >>> > > CPU: L3 > > >>> > > > cache: > > >>> > > > > 12288K > > >>> > > > > > CPU 7/0x0 -> > Node 0 > > CPU: Unsupported > > >>> number > > >>> > of > > >>> > > siblings 32 > > >>> > > > > installing > > >>> > > > > > Xen timer for > CPU 8 > > Initializing > > >>> CPU#8 CPU: > > >>> > L1 I > > >>> > > cache: > > >>> > > > 32K, L1 D > > >>> > > > > cache: > > >>> > > > > > 32K CPU: L2 > cache: > > 256K CPU: L3 > > >>> cache: > > >>> > 12288K CPU > > >>> > > 8/0x0 -> > > >>> > > > Node 0 > > >>> > > > > CPU: > > >>> > > > > > Unsupported > number of > > siblings 32 > > >>> installing > > >>> > Xen > > >>> > > timer for > > >>> > > > CPU 9 > > >>> > > > > > Initializing > CPU#9 > > CPU: L1 I cache: > > >>> 32K, L1 > > >>> > D > > >>> > > cache: 32K > > >>> > > > CPU: L2 > > >>> > > > > cache: > > >>> > > > > > 256K CPU: L3 > cache: > > 12288K CPU 9/0x0 > > >>> -> Node > > >>> > 0 CPU: > > >>> > > > Unsupported > > >>> > > > > number > > >>> > > > > > of siblings 32 > > installing Xen timer > > >>> for CPU > > >>> > 10 > > >>> > > > Initializing > > >>> > > > > CPU#10 CPU: > > >>> > > > > > L1 I cache: > 32K, L1 D > > cache: 32K CPU: > > >>> L2 > > >>> > cache: > > >>> > > 256K CPU: > > >>> > > > L3 > > >>> > > > > cache: > > >>> > > > > > 12288K CPU > 10/0x0 -> > > Node 0 CPU: > > >>> Unsupported > > >>> > number > > >>> > > of > > >>> > > > siblings > > >>> > > > > 32 > > >>> > > > > > installing Xen > timer > > for CPU 11 > > >>> Initializing > > >>> > CPU#11 > > >>> > > CPU: > > >>> > > > L1 I > > >>> > > > > cache: > > >>> > > > > > 32K, L1 D > cache: 32K > > CPU: L2 cache: > > >>> 256K > > >>> > CPU: L3 > > >>> > > cache: > > >>> > > > 12288K > > >>> > > > > CPU > > >>> > > > > > 11/0x0 -> Node > 0 CPU: > > Unsupported > > >>> number of > > >>> > > siblings 32 > > >>> > > > Brought > > >>> > > > > up 12 > > >>> > > > > > CPUs Grant > table > > initialized > > >>> regulator: core > > >>> > > version 0.5 > > >>> > > > Time: > > >>> > > > > 14:45:00 > > >>> > > > > > Date: 03/16/10 > NET: > > Registered > > >>> protocol > > >>> > family 16 > > >>> > > > > xenbus_probe_init ok > > >>> > > > > > ACPI FADT > declares the > > system doesn't > > >>> > support PCIe > > >>> > > ASPM, > > >>> > > > so > > >>> > > > > disable it > > >>> > > > > > ACPI: bus type > pci > > registered PCI: > > >>> MCFG > > >>> > > configuration 0: > > >>> > > > base > > >>> > > > > a0000000 > > >>> > > > > > segment 0 buses > 0 - > > 255 PCI: MCFG > > >>> area at > > >>> > a0000000 > > >>> > > > reserved in > > >>> > > > > E820 PCI: > > >>> > > > > > Using MMCONFIG > at > > a0000000 - afffffff > > >>> PCI: > > >>> > Using > > >>> > > > configuration > > >>> > > > > type 1 > > >>> > > > > > for base access > bio: > > create slab > > >>> <bio-0> at > > >>> > 0 ACPI > > >>> > > Error: > > >>> > > > Field > > >>> > > > > [CPB3] > > >>> > > > > > at 96 exceeds > Buffer > > [NULL] size 64 > > >>> (bits) > > >>> > > > > (20090903/dsopcode-596) > ACPI > > >>> > > > > > Error > (psparse-0537): > > Method > > >>> parse/execution > > >>> > failed > > >>> > > > [\_SB_._OSC] > > >>> > > > > (Node > > >>> > > > > > > ffff880064e00c98), > > >>> AE_AML_BUFFER_LIMIT ACPI: > > >>> > > Interpreter > > >>> > > > enabled > > >>> > > > > ACPI: > > >>> > > > > > (supports S0 S1 > S3 S4 > > S5) ACPI: Using > > >>> IOAPIC > > >>> > for > > >>> > > interrupt > > >>> > > > > routing ACPI > > >>> > > > > > Warning: > Incorrect > > checksum in table > > >>> [ ] > > >>> > - 97, > > >>> > > should > > >>> > > > be DB > > >>> > > > > > > (20090903/tbutils-314) > > ACPI: No dock > > >>> devices > > >>> > found. > > >>> > > ACPI: > > >>> > > > PCI > > >>> > > > > Root > > >>> > > > > > Bridge [PCI0] > > (0000:00) pci > > >>> 0000:00:01.0: > > >>> > PME# > > >>> > > supported > > >>> > > > from D0 > > >>> > > > > D3hot > > >>> > > > > > D3cold pci > > 0000:00:01.0: PME# > > >>> disabled pci > > >>> > > 0000:00:02.0: > > >>> > > > PME# > > >>> > > > > supported > > >>> > > > > > from D0 D3hot > D3cold > > pci > > >>> 0000:00:02.0: PME# > > >>> > > disabled pci > > >>> > > > > 0000:00:03.0: > > >>> > > > > > PME# supported > from D0 > > D3hot D3cold > > >>> pci > > >>> > > 0000:00:03.0: PME# > > >>> > > > > disabled pci > > >>> > > > > > 0000:00:04.0: > PME# > > supported from D0 > > >>> D3hot > > >>> > D3cold > > >>> > > pci > > >>> > > > > 0000:00:04.0: PME# > > >>> > > > > > disabled pci > > 0000:00:05.0: PME# > > >>> supported > > >>> > from D0 > > >>> > > D3hot > > >>> > > > D3cold > > >>> > > > > pci > > >>> > > > > > 0000:00:05.0: > PME# > > disabled pci > > >>> > 0000:00:06.0: PME# > > >>> > > > supported from > > >>> > > > > D0 > > >>> > > > > > D3hot D3cold > pci > > 0000:00:06.0: PME# > > >>> disabled > > >>> > pci > > >>> > > > 0000:00:07.0: > > >>> > > > > PME# > > >>> > > > > > supported from > D0 > > D3hot D3cold pci > > >>> > 0000:00:07.0: > > >>> > > PME# > > >>> > > > disabled > > >>> > > > > pci > > >>> > > > > > 0000:00:08.0: > PME# > > supported from D0 > > >>> D3hot > > >>> > D3cold > > >>> > > pci > > >>> > > > > 0000:00:08.0: PME# > > >>> > > > > > disabled pci > > 0000:00:09.0: PME# > > >>> supported > > >>> > from D0 > > >>> > > D3hot > > >>> > > > D3cold > > >>> > > > > pci > > >>> > > > > > 0000:00:09.0: > PME# > > disabled pci > > >>> > 0000:00:0a.0: PME# > > >>> > > > supported from > > >>> > > > > D0 > > >>> > > > > > D3hot D3cold > pci > > 0000:00:0a.0: PME# > > >>> disabled > > >>> > pci > > >>> > > > 0000:00:13.0: > > >>> > > > > PME# > > >>> > > > > > supported from > D0 > > D3hot D3cold pci > > >>> > 0000:00:13.0: > > >>> > > PME# > > >>> > > > disabled > > >>> > > > > pci > > >>> > > > > > 0000:00:1a.7: > PME# > > supported from D0 > > >>> D3hot > > >>> > D3cold > > >>> > > pci > > >>> > > > > 0000:00:1a.7: PME# > > >>> > > > > > disabled pci > > 0000:00:1c.0: PME# > > >>> supported > > >>> > from D0 > > >>> > > D3hot > > >>> > > > D3cold > > >>> > > > > pci > > >>> > > > > > 0000:00:1c.0: > PME# > > disabled pci > > >>> > 0000:00:1c.4: PME# > > >>> > > > supported from > > >>> > > > > D0 > > >>> > > > > > D3hot D3cold > pci > > 0000:00:1c.4: PME# > > >>> disabled > > >>> > pci > > >>> > > > 0000:00:1c.5: > > >>> > > > > PME# > > >>> > > > > > supported from > D0 > > D3hot D3cold pci > > >>> > 0000:00:1c.5: > > >>> > > PME# > > >>> > > > disabled > > >>> > > > > pci > > >>> > > > > > 0000:00:1d.7: > PME# > > supported from D0 > > >>> D3hot > > >>> > D3cold > > >>> > > pci > > >>> > > > > 0000:00:1d.7: PME# > > >>> > > > > > disabled pci > > 0000:00:1f.0: quirk: > > >>> region > > >>> > 0400-047f > > >>> > > claimed > > >>> > > > by > > >>> > > > > ICH6 > > >>> > > > > > ACPI/GPIO/TCO > pci > > 0000:00:1f.0: > > >>> quirk: > > >>> > region > > >>> > > 0500-053f > > >>> > > > claimed > > >>> > > > > by ICH6 > > >>> > > > > > GPIO pci > 0000:00:1f.0: > > ICH7 LPC > > >>> Generic IO > > >>> > decode 1 > > >>> > > PIO at > > >>> > > > 0680 > > >>> > > > > (mask > > >>> > > > > > 000f) pci > > 0000:00:1f.0: ICH7 LPC > > >>> Generic IO > > >>> > decode > > >>> > > 2 PIO > > >>> > > > at 0ca0 > > >>> > > > > (mask > > >>> > > > > > 000f) pci > > 0000:00:1f.0: ICH7 LPC > > >>> Generic IO > > >>> > decode > > >>> > > 3 PIO > > >>> > > > at 0600 > > >>> > > > > (mask > > >>> > > > > > 001f) pci > > 0000:00:1f.2: PME# > > >>> supported from > > >>> > D3hot > > >>> > > pci > > >>> > > > > 0000:00:1f.2: PME# > > >>> > > > > > disabled pci > > 0000:01:00.0: PME# > > >>> supported > > >>> > from D0 > > >>> > > D3hot > > >>> > > > D3cold > > >>> > > > > pci > > >>> > > > > > 0000:01:00.0: > PME# > > disabled pci > > >>> > 0000:01:00.1: PME# > > >>> > > > supported from > > >>> > > > > D0 > > >>> > > > > > D3hot D3cold > pci > > 0000:01:00.1: PME# > > >>> disabled > > >>> > pci > > >>> > > > 0000:0c:00.0: > > >>> > > > > disabling > > >>> > > > > > ASPM on pre-1.1 > PCIe > > device. You can > > >>> enable > > >>> > it > > >>> > > with > > >>> > > > > 'pcie_aspm=force' > > >>> > > > > > pci > 0000:00:1e.0: > > transparent bridge > > >>> ACPI: > > >>> > PCI Root > > >>> > > Bridge > > >>> > > > [PCI1] > > >>> > > > > > (0000:fe) ACPI: > PCI > > Root Bridge > > >>> [PCI2] > > >>> > (0000:ff) > > >>> > > ACPI: PCI > > >>> > > > > Interrupt > > >>> > > > > > Link [LNKA] > (IRQs 3 4 > > 5 6 7 9 10 *11 > > >>> 12 14 > > >>> > 15) > > >>> > > ACPI: PCI > > >>> > > > > Interrupt Link > > >>> > > > > > [LNKB] (IRQs 3 > 4 5 6 7 > > 9 *10 11 12 14 > > >>> 15) > > >>> > ACPI: PCI > > >>> > > > Interrupt > > >>> > > > > Link > > >>> > > > > > [LNKC] (IRQs 3 > 4 5 6 7 > > *9 10 11 12 14 > > >>> 15) > > >>> > ACPI: PCI > > >>> > > > Interrupt > > >>> > > > > Link > > >>> > > > > > [LNKD] (IRQs 3 > 4 *5 6 > > 7 9 10 11 12 14 > > >>> 15) > > >>> > ACPI: PCI > > >>> > > > Interrupt > > >>> > > > > Link > > >>> > > > > > [LNKE] (IRQs 3 > 4 5 6 7 > > 9 10 11 12 14 > > >>> 15) *0, > > >>> > > disabled. > > >>> > > > ACPI: PCI > > >>> > > > > > Interrupt Link > [LNKF] > > (IRQs 3 4 5 6 7 > > >>> 9 10 > > >>> > *11 12 > > >>> > > 14 15) > > >>> > > > ACPI: > > >>> > > > > PCI > > >>> > > > > > Interrupt Link > [LNKG] > > (IRQs 3 4 5 6 7 > > >>> 9 10 > > >>> > 11 12 14 > > >>> > > 15) > > >>> > > > *0, > > >>> > > > > disabled. > > >>> > > > > > ACPI: PCI > Interrupt > > Link [LNKH] (IRQs > > >>> 3 4 5 > > >>> > 6 7 9 > > >>> > > *10 11 > > >>> > > > 12 14 > > >>> > > > > 15) > > >>> > > > > > > > xenbus_probe_backend_init bus > > >>> registered ok > > >>> > > > > > xenbus_probe_frontend_init > > >>> > > > > > bus registered > ok > > xen_balloon: > > >>> Initialising > > >>> > balloon > > >>> > > driver > > >>> > > > with > > >>> > > > > page > > >>> > > > > > order 0. > vgaarb: > > device added: > > >>> > > > > > > > >>> > > > > PCI:0000:0c:00.0,decodes=io+mem,owns=io+mem,locks=none > > >>> > > > vgaarb: > > >>> > > > > loaded > > >>> > > > > > SCSI subsystem > > initialized usbcore: > > >>> > registered new > > >>> > > > interface > > >>> > > > > driver > > >>> > > > > > usbfs usbcore: > > registered new > > >>> interface > > >>> > driver hub > > >>> > > > usbcore: > > >>> > > > > registered > > >>> > > > > > new device > driver usb > > PCI: Using ACPI > > >>> for > > >>> > IRQ > > >>> > > routing > > >>> > > > NetLabel: > > >>> > > > > > Initializing > NetLabel: > > domain hash > > >>> size = > > >>> > 128 > > >>> > > NetLabel: > > >>> > > > > protocols = > > >>> > > > > > UNLABELED > CIPSOv4 > > NetLabel: > > >>> unlabeled > > >>> > traffic > > >>> > > allowed by > > >>> > > > default > > >>> > > > > > Switching to > > clocksource xen kstop/0 > > >>> used > > >>> > greatest > > >>> > > stack > > >>> > > > depth: > > >>> > > > > 6568 > > >>> > > > > > bytes left > kstop/1 > > used greatest > > >>> stack > > >>> > depth: 6536 > > >>> > > bytes > > >>> > > > left > > >>> > > > > pnp: PnP > > >>> > > > > > ACPI init ACPI: > bus > > type pnp > > >>> registered > > >>> > > xen_allocate_pirq: > > >>> > > > > returning irq > > >>> > > > > > 8 for gsi 8 > Already > > setup the GSI :8 > > >>> > > xen_allocate_pirq: > > >>> > > > returning > > >>> > > > > irq 13 > > >>> > > > > > for gsi 13 > Already > > setup the GSI :13 > > >>> pnp: > > >>> > PnP ACPI: > > >>> > > found > > >>> > > > 13 > > >>> > > > > devices > > >>> > > > > > ACPI: ACPI bus > type > > pnp unregistered > > >>> system > > >>> > 00:07: > > >>> > > ioport > > >>> > > > range > > >>> > > > > > 0x500-0x53f has > been > > reserved system > > >>> 00:07: > > >>> > ioport > > >>> > > range > > >>> > > > > 0x400-0x47f has > > >>> > > > > > been reserved > system > > 00:07: ioport > > >>> range > > >>> > > 0x800-0x81f has > > >>> > > > been > > >>> > > > > reserved > > >>> > > > > > system 00:07: > ioport > > range > > >>> 0x2f8-0x2ff has > > >>> > been > > >>> > > reserved > > >>> > > > system > > >>> > > > > 00:07: > > >>> > > > > > iomem range > > 0xfed1c000-0xfed8bffe > > >>> could not > > >>> > be > > >>> > > reserved > > >>> > > > system > > >>> > > > > 00:07: > > >>> > > > > > iomem range > > 0xff000000-0xffffffff > > >>> could not > > >>> > be > > >>> > > reserved > > >>> > > > system > > >>> > > > > 00:07: > > >>> > > > > > iomem range > > 0xfee00000-0xfeefffff has > > >>> been > > >>> > reserved > > >>> > > system > > >>> > > > 00:07: > > >>> > > > > iomem > > >>> > > > > > range > > 0xfe900000-0xfe90001f has been > > >>> > reserved > > >>> > > system > > >>> > > > 00:07: iomem > > >>> > > > > range > > >>> > > > > > > 0xfea00000-0xfea0001f > > has been > > >>> reserved > > >>> > system > > >>> > > 00:07: > > >>> > > > iomem range > > >>> > > > > > > 0xfed1b000-0xfed1bfff > > has been > > >>> reserved pci > > >>> > > 0000:0c:00.0: > > >>> > > > BAR 6: > > >>> > > > > no > > >>> > > > > > parent found > for of > > device > > >>> > [0xffff0000-0xffffffff] > > >>> > > pci > > >>> > > > > 0000:00:01.0: PCI > > >>> > > > > > bridge, > secondary bus > > 0000:01 pci > > >>> > 0000:00:01.0: > > >>> > > IO > > >>> > > > window: > > >>> > > > > > 0x1000-0x1fff > pci > > 0000:00:01.0: MEM > > >>> > window: > > >>> > > > > 0xb1900000-0xb19fffff > pci > > >>> > > > > > 0000:00:01.0: > > PREFETCH window: > > >>> disabled > > >>> > pci > > >>> > > > 0000:00:02.0: PCI > > >>> > > > > bridge, > > >>> > > > > > secondary bus > 0000:02 > > pci > > >>> 0000:00:02.0: IO > > >>> > > window: > > >>> > > > disabled pci > > >>> > > > > > 0000:00:02.0: > MEM > > window: disabled > > >>> pci > > >>> > > 0000:00:02.0: > > >>> > > > PREFETCH > > >>> > > > > > window: > disabled pci > > 0000:00:03.0: > > >>> PCI > > >>> > bridge, > > >>> > > secondary > > >>> > > > bus > > >>> > > > > 0000:03 pci > > >>> > > > > > 0000:00:03.0: > IO > > window: disabled > > >>> pci > > >>> > > 0000:00:03.0: > > >>> > > > MEM > > >>> > > > > window: > > >>> > > > > > disabled pci > > 0000:00:03.0: PREFETCH > > >>> > window: > > >>> > > disabled pci > > >>> > > > > 0000:00:04.0: > > >>> > > > > > PCI bridge, > secondary > > bus 0000:04 pci > > >>> > 0000:00:04.0: > > >>> > > IO > > >>> > > > window: > > >>> > > > > > disabled pci > > 0000:00:04.0: MEM > > >>> window: > > >>> > disabled > > >>> > > pci > > >>> > > > > 0000:00:04.0: > > >>> > > > > > PREFETCH > window: > > disabled pci > > >>> 0000:00:05.0: > > >>> > PCI > > >>> > > bridge, > > >>> > > > secondary > > >>> > > > > bus > > >>> > > > > > 0000:05 pci > > 0000:00:05.0: IO > > >>> window: > > >>> > disabled pci > > >>> > > > 0000:00:05.0: > > >>> > > > > MEM > > >>> > > > > > window: > disabled pci > > 0000:00:05.0: > > >>> > PREFETCH > > >>> > > window: > > >>> > > > disabled > > >>> > > > > pci > > >>> > > > > > 0000:00:06.0: > PCI > > bridge, secondary > > >>> bus > > >>> > 0000:06 pci > > >>> > > > 0000:00:06.0: > > >>> > > > > IO > > >>> > > > > > window: > disabled pci > > 0000:00:06.0: > > >>> MEM > > >>> > window: > > >>> > > disabled > > >>> > > > pci > > >>> > > > > > 0000:00:06.0: > > PREFETCH window: > > >>> disabled > > >>> > pci > > >>> > > > 0000:00:07.0: PCI > > >>> > > > > bridge, > > >>> > > > > > secondary bus > 0000:07 > > pci > > >>> 0000:00:07.0: IO > > >>> > > window: > > >>> > > > disabled pci > > >>> > > > > > 0000:00:07.0: > MEM > > window: disabled > > >>> pci > > >>> > > 0000:00:07.0: > > >>> > > > PREFETCH > > >>> > > > > > window: > disabled pci > > 0000:00:08.0: > > >>> PCI > > >>> > bridge, > > >>> > > secondary > > >>> > > > bus > > >>> > > > > 0000:08 pci > > >>> > > > > > 0000:00:08.0: > IO > > window: disabled > > >>> pci > > >>> > > 0000:00:08.0: > > >>> > > > MEM > > >>> > > > > window: > > >>> > > > > > disabled pci > > 0000:00:08.0: PREFETCH > > >>> > window: > > >>> > > disabled pci > > >>> > > > > 0000:00:09.0: > > >>> > > > > > PCI bridge, > secondary > > bus 0000:09 pci > > >>> > 0000:00:09.0: > > >>> > > IO > > >>> > > > window: > > >>> > > > > > 0x3000-0x3fff > pci > > 0000:00:09.0: MEM > > >>> > window: > > >>> > > > > 0xb1b00000-0xb1cfffff > pci > > >>> > > > > > 0000:00:09.0: > > PREFETCH window: > > >>> > > > > > > 0x000000b1d00000-0x000000b1efffff pci > > >>> > > > > > 0000:00:0a.0: > PCI > > bridge, secondary > > >>> bus > > >>> > 0000:0a pci > > >>> > > > 0000:00:0a.0: > > >>> > > > > IO > > >>> > > > > > window: > disabled pci > > 0000:00:0a.0: > > >>> MEM > > >>> > window: > > >>> > > disabled > > >>> > > > pci > > >>> > > > > > 0000:00:0a.0: > > PREFETCH window: > > >>> disabled > > >>> > pci > > >>> > > > 0000:00:1c.0: PCI > > >>> > > > > bridge, > > >>> > > > > > secondary bus > 0000:0b > > pci > > >>> 0000:00:1c.0: IO > > >>> > > window: > > >>> > > > disabled pci > > >>> > > > > > 0000:00:1c.0: > MEM > > window: disabled > > >>> pci > > >>> > > 0000:00:1c.0: > > >>> > > > PREFETCH > > >>> > > > > > window: > disabled pci > > 0000:00:1c.4: > > >>> PCI > > >>> > bridge, > > >>> > > secondary > > >>> > > > bus > > >>> > > > > 0000:0c pci > > >>> > > > > > 0000:00:1c.4: > IO > > window: disabled > > >>> pci > > >>> > > 0000:00:1c.4: > > >>> > > > MEM > > >>> > > > > window: > > >>> > > > > > > 0xb1000000-0xb18fffff > > pci > > >>> 0000:00:1c.4: > > >>> > PREFETCH > > >>> > > window: > > >>> > > > > > > > 0x000000b0000000-0x000000b0ffffff pci > > >>> > 0000:00:1c.5: > > >>> > > PCI > > >>> > > > bridge, > > >>> > > > > > secondary bus > 0000:0d > > pci > > >>> 0000:00:1c.5: IO > > >>> > > window: > > >>> > > > disabled pci > > >>> > > > > > 0000:00:1c.5: > MEM > > window: disabled > > >>> pci > > >>> > > 0000:00:1c.5: > > >>> > > > PREFETCH > > >>> > > > > > window: > disabled pci > > 0000:00:1e.0: > > >>> PCI > > >>> > bridge, > > >>> > > secondary > > >>> > > > bus > > >>> > > > > 0000:0e pci > > >>> > > > > > 0000:00:1e.0: > IO > > window: disabled > > >>> pci > > >>> > > 0000:00:1e.0: > > >>> > > > MEM > > >>> > > > > window: > > >>> > > > > > disabled pci > > 0000:00:1e.0: PREFETCH > > >>> > window: > > >>> > > disabled pci > > >>> > > > > 0000:00:01.0: > > >>> > > > > > PCI INT A -> > GSI 28 > > (level, low) -> > > >>> IRQ 28 > > >>> > pci > > >>> > > > 0000:00:02.0: PCI > > >>> > > > > INT A > > >>> > > > > > -> GSI 29 > (level, > > low) -> IRQ 29 pci > > >>> > 0000:00:03.0: > > >>> > > PCI INT > > >>> > > > A -> > > >>> > > > > GSI 24 > > >>> > > > > > (level, low) -> > IRQ > > 24 pci > > >>> 0000:00:04.0: PCI > > >>> > INT A > > >>> > > -> GSI > > >>> > > > 25 > > >>> > > > > (level, > > >>> > > > > > low) -> IRQ 25 > pci > > 0000:00:05.0: PCI > > >>> INT A > > >>> > -> GSI > > >>> > > 26 > > >>> > > > (level, low) > > >>> > > > > -> IRQ > > >>> > > > > > 26 pci > 0000:00:06.0: > > PCI INT A -> GSI > > >>> 27 > > >>> > (level, > > >>> > > low) -> > > >>> > > > IRQ 27 > > >>> > > > > pci > > >>> > > > > > 0000:00:07.0: > PCI INT > > A -> GSI 30 > > >>> (level, > > >>> > low) -> > > >>> > > IRQ 30 > > >>> > > > pci > > >>> > > > > > 0000:00:08.0: > PCI INT > > A -> GSI 31 > > >>> (level, > > >>> > low) -> > > >>> > > IRQ 31 > > >>> > > > pci > > >>> > > > > > 0000:00:09.0: > PCI INT > > A -> GSI 32 > > >>> (level, > > >>> > low) -> > > >>> > > IRQ 32 > > >>> > > > pci > > >>> > > > > > 0000:00:0a.0: > PCI INT > > A -> GSI 33 > > >>> (level, > > >>> > low) -> > > >>> > > IRQ 33 > > >>> > > > pci > > >>> > > > > > 0000:00:1c.0: > PCI INT > > A -> GSI 16 > > >>> (level, > > >>> > low) -> > > >>> > > IRQ 16 > > >>> > > > > > > xen_allocate_pirq: > > returning irq 16 > > >>> for gsi > > >>> > 16 > > >>> > > Already > > >>> > > > setup the > > >>> > > > > GSI :16 > > >>> > > > > > pci > 0000:00:1c.4: PCI > > INT A -> GSI 16 > > >>> > (level, low) > > >>> > > -> IRQ > > >>> > > > 16 pci > > >>> > > > > > 0000:00:1c.5: > PCI INT > > B -> GSI 17 > > >>> (level, > > >>> > low) -> > > >>> > > IRQ 17 > > >>> > > > NET: > > >>> > > > > Registered > > >>> > > > > > protocol family > 2 IP > > route cache hash > > >>> table > > >>> > > entries: 65536 > > >>> > > > > (order: 7, > > >>> > > > > > 524288 bytes) > TCP > > established hash > > >>> table > > >>> > entries: > > >>> > > 262144 > > >>> > > > (order: > > >>> > > > > 10, > > >>> > > > > > 4194304 bytes) > TCP > > bind hash table > > >>> entries: > > >>> > 65536 > > >>> > > (order: > > >>> > > > 10, > > >>> > > > > 4718592 > > >>> > > > > > bytes) TCP: > Hash > > tables configured > > >>> > (established > > >>> > > 262144 > > >>> > > > bind > > >>> > > > > 65536) TCP > > >>> > > > > > reno registered > NET: > > Registered > > >>> protocol > > >>> > family 1 > > >>> > > pci > > >>> > > > > 0000:01:00.0: > > >>> > > > > > Disabling L0s > pci > > 0000:01:00.1: > > >>> Disabling > > >>> > L0s > > >>> > > Trying to > > >>> > > > unpack > > >>> > > > > rootfs > > >>> > > > > > image as > initramfs... > > Freeing initrd > > >>> memory: > > >>> > 6474k > > >>> > > freed > > >>> > > > DMA-API: > > >>> > > > > > preallocated > 32768 > > debug entries > > >>> DMA-API: > > >>> > debugging > > >>> > > > enabled by > > >>> > > > > kernel > > >>> > > > > > config PCI-DMA: > Using > > software bounce > > >>> > buffering for > > >>> > > IO > > >>> > > > (SWIOTLB) > > >>> > > > > DMA: > > >>> > > > > > Placing 64MB > software > > IO TLB between > > >>> > > ffff880007525000 - > > >>> > > > > ffff88000b525000 > > >>> > > > > > DMA: software > IO TLB > > at phys > > >>> 0x7525000 - > > >>> > 0xb525000 > > >>> > > audit: > > >>> > > > > initializing > > >>> > > > > > netlink socket > > (disabled) type=2000 > > >>> > > > audit(1268750702.035:1): > > >>> > > > > initialized > > >>> > > > > > HugeTLB > registered 2 > > MB page size, > > >>> > pre-allocated 0 > > >>> > > pages > > >>> > > > VFS: > > >>> > > > > Disk > > >>> > > > > > quotas > dquot_6.5.2 > > Dquot-cache hash > > >>> table > > >>> > entries: > > >>> > > 512 > > >>> > > > (order 0, > > >>> > > > > 4096 > > >>> > > > > > bytes) msgmni > has been > > set to 2970 > > >>> > cryptomgr_test > > >>> > > used > > >>> > > > greatest > > >>> > > > > stack > > >>> > > > > > depth: 5864 > bytes left > > cryptomgr_test > > >>> used > > >>> > greatest > > >>> > > stack > > >>> > > > depth: > > >>> > > > > 5816 > > >>> > > > > > bytes left alg: > No > > test for stdrng > > >>> (krng) > > >>> > Block > > >>> > > layer SCSI > > >>> > > > > generic (bsg) > > >>> > > > > > driver version > 0.4 > > loaded (major 252) > > >>> io > > >>> > scheduler > > >>> > > noop > > >>> > > > > registered io > > >>> > > > > > scheduler > anticipatory > > registered io > > >>> > scheduler > > >>> > > deadline > > >>> > > > > registered io > > >>> > > > > > scheduler cfq > > registered (default) > > >>> > pci_hotplug: PCI > > >>> > > Hot > > >>> > > > Plug PCI > > >>> > > > > Core > > >>> > > > > > version: 0.5 > pciehp > > >>> 0000:00:09.0:pcie04: HPC > > >>> > > vendor_id > > >>> > > > 8086 > > >>> > > > > device_id > > >>> > > > > > 3410 ss_vid 0 > ss_did 0 > > pciehp: PCI > > >>> Express > > >>> > Hot Plug > > >>> > > > Controller > > >>> > > > > Driver > > >>> > > > > > version: 0.4 > acpiphp: > > ACPI Hot Plug > > >>> PCI > > >>> > Controller > > >>> > > Driver > > >>> > > > > version: 0.5 > > >>> > > > > > acpiphp_glue: > Slot 2 > > already > > >>> registered by > > >>> > another > > >>> > > hotplug > > >>> > > > driver > > >>> > > > > > acpiphp_glue: > Slot 2 > > already > > >>> registered by > > >>> > another > > >>> > > hotplug > > >>> > > > driver > > >>> > > > > > acpiphp_glue: > Slot 2 > > already > > >>> registered by > > >>> > another > > >>> > > hotplug > > >>> > > > driver > > >>> > > > > > acpiphp_glue: > Slot 2 > > already > > >>> registered by > > >>> > another > > >>> > > hotplug > > >>> > > > driver > > >>> > > > > > acpiphp_glue: > Slot 2 > > already > > >>> registered by > > >>> > another > > >>> > > hotplug > > >>> > > > driver > > >>> > > > > > acpiphp_glue: > Slot 2 > > already > > >>> registered by > > >>> > another > > >>> > > hotplug > > >>> > > > driver > > >>> > > > > > acpiphp_glue: > Slot 2 > > already > > >>> registered by > > >>> > another > > >>> > > hotplug > > >>> > > > driver > > >>> > > > > > acpiphp_glue: > Slot 2 > > already > > >>> registered by > > >>> > another > > >>> > > hotplug > > >>> > > > driver > > >>> > > > > > pci-stub: > invalid id > > string "" input: > > >>> Sleep > > >>> > Button > > >>> > > as > > >>> > > > > > > > >>> > > > > /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 > > >>> > > > ACPI: > > >>> > > > > Sleep > > >>> > > > > > Button [SLPB] > input: > > Power Button as > > >>> > > > > > > > >>> > /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 > ACPI: > > >>> > > Power > > >>> > > > Button > > >>> > > > > [PWRF] > > >>> > > > > > registering > netback > > hpet_acpi_add: no > > >>> > address or > > >>> > > irqs in > > >>> > > > _CRS > > >>> > > > > > Non-volatile > memory > > driver v1.3 Linux > > >>> > agpgart > > >>> > > interface > > >>> > > > v0.103 > > >>> > > > > Serial: > > >>> > > > > > 8250/16550 > driver, 4 > > ports, IRQ > > >>> sharing > > >>> > enabled > > >>> > > > serial8250: ttyS1 > > >>> > > > > at I/O > > >>> > > > > > 0x2f8 (irq = 3) > is a > > 16550A brd: > > >>> module > > >>> > loaded > > >>> > > loop: > > >>> > > > module > > >>> > > > > loaded > > >>> > > > > > input: > Macintosh mouse > > button > > >>> emulation as > > >>> > > > > > /devices/virtual/input/input2 > > >>> > > > > > ahci > 0000:00:1f.2: PCI > > INT A -> GSI > > >>> 19 > > >>> > (level, low) > > >>> > > -> IRQ > > >>> > > > 19 > > >>> > > > > ahci > > >>> > > > > > 0000:00:1f.2: > AHCI > > 0001.0200 32 slots > > >>> 6 > > >>> > ports 3 > > >>> > > Gbps 0x3f > > >>> > > > impl > > >>> > > > > SATA mode > > >>> > > > > > ahci > 0000:00:1f.2: > > flags: 64bit ncq > > >>> sntf pm > > >>> > led clo > > >>> > > pio > > >>> > > > slum part > > >>> > > > > ccc > > >>> > > > > > ems scsi0 : > ahci > > scsi1 : ahci scsi2 > > >>> : ahci > > >>> > scsi3 : > > >>> > > ahci > > >>> > > > scsi4 : > > >>> > > > > ahci > > >>> > > > > > scsi5 : ahci > ata1: > > SATA max UDMA/133 > > >>> > irq_stat > > >>> > > 0x00400040, > > >>> > > > > connection > > >>> > > > > > status changed > irq > > 2996 ata2: SATA > > >>> max > > >>> > UDMA/133 > > >>> > > abar > > >>> > > > > m2048@0xb1a00000 > > >>> > > > > > port 0xb1a00180 > irq > > 2996 ata3: SATA > > >>> max > > >>> > UDMA/133 > > >>> > > abar > > >>> > > > > m2048@0xb1a00000 > > >>> > > > > > port 0xb1a00200 > irq > > 2996 ata4: SATA > > >>> max > > >>> > UDMA/133 > > >>> > > abar > > >>> > > > > m2048@0xb1a00000 > > >>> > > > > > port 0xb1a00280 > irq > > 2996 ata5: SATA > > >>> max > > >>> > UDMA/133 > > >>> > > abar > > >>> > > > > m2048@0xb1a00000 > > >>> > > > > > port 0xb1a00300 > irq > > 2996 ata6: SATA > > >>> max > > >>> > UDMA/133 > > >>> > > abar > > >>> > > > > m2048@0xb1a00000 > > >>> > > > > > port 0xb1a00380 > irq > > 2996 Fixed MDIO > > >>> Bus: > > >>> > probed > > >>> > > ehci_hcd: > > >>> > > > USB 2.0 > > >>> > > > > > 'Enhanced' Host > > Controller (EHCI) > > >>> Driver > > >>> > ehci_hcd > > >>> > > > 0000:00:1a.7: > > >>> > > > > PCI INT > > >>> > > > > > C -> GSI 18 > (level, > > low) -> IRQ 18 > > >>> ehci_hcd > > >>> > > 0000:00:1a.7: > > >>> > > > EHCI > > >>> > > > > Host > > >>> > > > > > Controller > ehci_hcd > > 0000:00:1a.7: new > > >>> USB > > >>> > bus > > >>> > > registered, > > >>> > > > > assigned bus > > >>> > > > > > number 1 > ehci_hcd > > 0000:00:1a.7: debug > > >>> port 1 > > >>> > > ehci_hcd > > >>> > > > > 0000:00:1a.7: irq > > >>> > > > > > 18, io mem > 0xb1a02000 > > ehci_hcd > > >>> 0000:00:1a.7: > > >>> > USB > > >>> > > 2.0 > > >>> > > > started, > > >>> > > > > EHCI 1.00 > > >>> > > > > > usb usb1: New > USB > > device found, > > >>> > idVendor=1d6b, > > >>> > > > idProduct=0002 usb > > >>> > > > > usb1: > > >>> > > > > > New USB device > > strings: Mfr=3, > > >>> Product=2, > > >>> > > SerialNumber=1 > > >>> > > > usb > > >>> > > > > usb1: > > >>> > > > > > Product: EHCI > Host > > Controller usb > > >>> usb1: > > >>> > > Manufacturer: > > >>> > > > Linux > > >>> > > > > 2.6.32.9 > > >>> > > > > > ehci_hcd usb > usb1: > > SerialNumber: > > >>> > 0000:00:1a.7 usb > > >>> > > usb1: > > >>> > > > > configuration #1 > > >>> > > > > > chosen from 1 > choice > > hub 1-0:1.0: USB > > >>> hub > > >>> > found hub > > >>> > > > 1-0:1.0: 6 > > >>> > > > > ports > > >>> > > > > > detected > ehci_hcd > > 0000:00:1d.7: PCI > > >>> INT A -> > > >>> > GSI 23 > > >>> > > > (level, low) > > >>> > > > > -> IRQ > > >>> > > > > > 23 ehci_hcd > > 0000:00:1d.7: EHCI Host > > >>> > Controller > > >>> > > ehci_hcd > > >>> > > > > 0000:00:1d.7: > > >>> > > > > > new USB bus > > registered, assigned bus > > >>> number > > >>> > 2 > > >>> > > ehci_hcd > > >>> > > > > 0000:00:1d.7: > > >>> > > > > > debug port 1 > ehci_hcd > > 0000:00:1d.7: > > >>> irq 23, > > >>> > io mem > > >>> > > > 0xb1a01000 > > >>> > > > > ehci_hcd > > >>> > > > > > 0000:00:1d.7: > USB 2.0 > > started, EHCI > > >>> 1.00 usb > > >>> > usb2: > > >>> > > New USB > > >>> > > > device > > >>> > > > > found, > > >>> > > > > > idVendor=1d6b, > > idProduct=0002 usb > > >>> usb2: New > > >>> > USB > > >>> > > device > > >>> > > > strings: > > >>> > > > > Mfr=3, > > >>> > > > > > Product=2, > > SerialNumber=1 usb usb2: > > >>> Product: > > >>> > EHCI > > >>> > > Host > > >>> > > > Controller > > >>> > > > > usb > > >>> > > > > > usb2: > Manufacturer: > > Linux 2.6.32.9 > > >>> ehci_hcd > > >>> > usb > > >>> > > usb2: > > >>> > > > > SerialNumber: > > >>> > > > > > 0000:00:1d.7 > usb usb2: > > configuration > > >>> #1 > > >>> > chosen from > > >>> > > 1 > > >>> > > > choice hub > > >>> > > > > > 2-0:1.0: USB > hub found > > hub 2-0:1.0: 6 > > >>> ports > > >>> > > detected > > >>> > > > ohci_hcd: > > >>> > > > > USB 1.1 > > >>> > > > > > 'Open' Host > Controller > > (OHCI) Driver > > >>> > uhci_hcd: USB > > >>> > > > Universal Host > > >>> > > > > > Controller > Interface > > driver > > >>> > xen_allocate_pirq: > > >>> > > returning > > >>> > > > irq 16 > > >>> > > > > for gsi > > >>> > > > > > 16 Already > setup the > > GSI :16 uhci_hcd > > >>> > 0000:00:1a.0: > > >>> > > PCI > > >>> > > > INT A -> > > >>> > > > > GSI 16 > > >>> > > > > > (level, low) -> > IRQ > > 16 uhci_hcd > > >>> > 0000:00:1a.0: UHCI > > >>> > > Host > > >>> > > > > Controller > > >>> > > > > > uhci_hcd > 0000:00:1a.0: > > new USB bus > > >>> > registered, > > >>> > > assigned > > >>> > > > bus > > >>> > > > > number 3 > > >>> > > > > > uhci_hcd > 0000:00:1a.0: > > irq 16, io > > >>> base > > >>> > 0x000020e0 > > >>> > > usb > > >>> > > > usb3: New > > >>> > > > > USB > > >>> > > > > > device found, > > idVendor=1d6b, > > >>> idProduct=0001 > > >>> > usb > > >>> > > usb3: New > > >>> > > > USB > > >>> > > > > device > > >>> > > > > > strings: Mfr=3, > > Product=2, > > >>> SerialNumber=1 > > >>> > usb usb3: > > >>> > > > Product: UHCI > > >>> > > > > Host > > >>> > > > > > Controller usb > usb3: > > Manufacturer: > > >>> Linux > > >>> > 2.6.32.9 > > >>> > > uhci_hcd > > >>> > > > usb > > >>> > > > > usb3: > > >>> > > > > > SerialNumber: > > 0000:00:1a.0 usb usb3: > > >>> > configuration > > >>> > > #1 > > >>> > > > chosen from > > >>> > > > > 1 > > >>> > > > > > choice hub > 3-0:1.0: > > USB hub found hub > > >>> > 3-0:1.0: 2 > > >>> > > ports > > >>> > > > detected > > >>> > > > > uhci_hcd > > >>> > > > > > 0000:00:1a.1: > PCI INT > > B -> GSI 21 > > >>> (level, > > >>> > low) -> > > >>> > > IRQ 21 > > >>> > > > uhci_hcd > > >>> > > > > > 0000:00:1a.1: > UHCI > > Host Controller > > >>> uhci_hcd > > >>> > > 0000:00:1a.1: > > >>> > > > new USB > > >>> > > > > bus > > >>> > > > > > registered, > assigned > > bus number 4 > > >>> uhci_hcd > > >>> > > 0000:00:1a.1: > > >>> > > > irq 21, > > >>> > > > > io base > > >>> > > > > > 0x000020c0 usb > usb4: > > New USB device > > >>> found, > > >>> > > idVendor=1d6b, > > >>> > > > > idProduct=0001 > > >>> > > > > > usb usb4: New > USB > > device strings: > > >>> Mfr=3, > > >>> > Product=2, > > >>> > > > > SerialNumber=1 usb > > >>> > > > > > usb4: Product: > UHCI > > Host Controller > > >>> usb > > >>> > usb4: > > >>> > > > Manufacturer: Linux > > >>> > > > > > 2.6.32.9 > uhci_hcd usb > > usb4: > > >>> SerialNumber: > > >>> > > 0000:00:1a.1 usb > > >>> > > > usb4: > > >>> > > > > > configuration > #1 > > chosen from 1 choice > > >>> hub > > >>> > 4-0:1.0: > > >>> > > USB hub > > >>> > > > found > > >>> > > > > hub > > >>> > > > > > 4-0:1.0: 2 > ports > > detected > > >>> xen_allocate_pirq: > > >>> > > returning irq > > >>> > > > 19 for > > >>> > > > > gsi 19 > > >>> > > > > > Already setup > the GSI > > :19 uhci_hcd > > >>> > 0000:00:1a.2: > > >>> > > PCI INT D > > >>> > > > -> GSI > > >>> > > > > 19 > > >>> > > > > > (level, low) -> > IRQ > > 19 uhci_hcd > > >>> > 0000:00:1a.2: UHCI > > >>> > > Host > > >>> > > > > Controller > > >>> > > > > > uhci_hcd > 0000:00:1a.2: > > new USB bus > > >>> > registered, > > >>> > > assigned > > >>> > > > bus > > >>> > > > > number 5 > > >>> > > > > > uhci_hcd > 0000:00:1a.2: > > irq 19, io > > >>> base > > >>> > 0x000020a0 > > >>> > > usb > > >>> > > > usb5: New > > >>> > > > > USB > > >>> > > > > > device found, > > idVendor=1d6b, > > >>> idProduct=0001 > > >>> > usb > > >>> > > usb5: New > > >>> > > > USB > > >>> > > > > device > > >>> > > > > > strings: Mfr=3, > > Product=2, > > >>> SerialNumber=1 > > >>> > usb usb5: > > >>> > > > Product: UHCI > > >>> > > > > Host > > >>> > > > > > Controller usb > usb5: > > Manufacturer: > > >>> Linux > > >>> > 2.6.32.9 > > >>> > > uhci_hcd > > >>> > > > usb > > >>> > > > > usb5: > > >>> > > > > > SerialNumber: > > 0000:00:1a.2 usb usb5: > > >>> > configuration > > >>> > > #1 > > >>> > > > chosen from > > >>> > > > > 1 > > >>> > > > > > choice hub > 5-0:1.0: > > USB hub found hub > > >>> > 5-0:1.0: 2 > > >>> > > ports > > >>> > > > detected > > >>> > > > > > > xen_allocate_pirq: > > returning irq 23 > > >>> for gsi > > >>> > 23 > > >>> > > Already > > >>> > > > setup the > > >>> > > > > GSI :23 > > >>> > > > > > uhci_hcd > 0000:00:1d.0: > > PCI INT A -> > > >>> GSI 23 > > >>> > (level, > > >>> > > low) -> > > >>> > > > IRQ 23 > > >>> > > > > > uhci_hcd > 0000:00:1d.0: > > UHCI Host > > >>> Controller > > >>> > > uhci_hcd > > >>> > > > > 0000:00:1d.0: new > > >>> > > > > > USB bus > registered, > > assigned bus > > >>> number 6 > > >>> > uhci_hcd > > >>> > > > 0000:00:1d.0: > > >>> > > > > irq 23, > > >>> > > > > > io base > 0x00002080 usb > > usb6: New USB > > >>> device > > >>> > found, > > >>> > > > idVendor=1d6b, > > >>> > > > > > idProduct=0001 > usb > > usb6: New USB > > >>> device > > >>> > strings: > > >>> > > Mfr=3, > > >>> > > > > Product=2, > > >>> > > > > > SerialNumber=1 > usb > > usb6: Product: > > >>> UHCI Host > > >>> > > Controller usb > > >>> > > > usb6: > > >>> > > > > > Manufacturer: > Linux > > 2.6.32.9 uhci_hcd > > >>> usb > > >>> > usb6: > > >>> > > > SerialNumber: > > >>> > > > > > 0000:00:1d.0 > usb usb6: > > configuration > > >>> #1 > > >>> > chosen from > > >>> > > 1 > > >>> > > > choice hub > > >>> > > > > > 6-0:1.0: USB > hub found > > hub 6-0:1.0: 2 > > >>> ports > > >>> > > detected > > >>> > > > > xen_allocate_pirq: > > >>> > > > > > returning irq > 19 for > > gsi 19 Already > > >>> setup > > >>> > the GSI > > >>> > > :19 > > >>> > > > uhci_hcd > > >>> > > > > > 0000:00:1d.1: > PCI INT > > B -> GSI 19 > > >>> (level, > > >>> > low) -> > > >>> > > IRQ 19 > > >>> > > > uhci_hcd > > >>> > > > > > 0000:00:1d.1: > UHCI > > Host Controller > > >>> uhci_hcd > > >>> > > 0000:00:1d.1: > > >>> > > > new USB > > >>> > > > > bus > > >>> > > > > > registered, > assigned > > bus number 7 > > >>> uhci_hcd > > >>> > > 0000:00:1d.1: > > >>> > > > irq 19, > > >>> > > > > io base > > >>> > > > > > 0x00002060 usb > usb7: > > New USB device > > >>> found, > > >>> > > idVendor=1d6b, > > >>> > > > > idProduct=0001 > > >>> > > > > > usb usb7: New > USB > > device strings: > > >>> Mfr=3, > > >>> > Product=2, > > >>> > > > > SerialNumber=1 usb > > >>> > > > > > usb7: Product: > UHCI > > Host Controller > > >>> usb > > >>> > usb7: > > >>> > > > Manufacturer: Linux > > >>> > > > > > 2.6.32.9 > uhci_hcd usb > > usb7: > > >>> SerialNumber: > > >>> > > 0000:00:1d.1 usb > > >>> > > > usb7: > > >>> > > > > > configuration > #1 > > chosen from 1 choice > > >>> hub > > >>> > 7-0:1.0: > > >>> > > USB hub > > >>> > > > found > > >>> > > > > hub > > >>> > > > > > 7-0:1.0: 2 > ports > > detected > > >>> xen_allocate_pirq: > > >>> > > returning irq > > >>> > > > 18 for > > >>> > > > > gsi 18 > > >>> > > > > > Already setup > the GSI > > :18 uhci_hcd > > >>> > 0000:00:1d.2: > > >>> > > PCI INT C > > >>> > > > -> GSI > > >>> > > > > 18 > > >>> > > > > > (level, low) -> > IRQ > > 18 uhci_hcd > > >>> > 0000:00:1d.2: UHCI > > >>> > > Host > > >>> > > > > Controller > > >>> > > > > > uhci_hcd > 0000:00:1d.2: > > new USB bus > > >>> > registered, > > >>> > > assigned > > >>> > > > bus > > >>> > > > > number 8 > > >>> > > > > > uhci_hcd > 0000:00:1d.2: > > irq 18, io > > >>> base > > >>> > 0x00002040 > > >>> > > usb > > >>> > > > usb8: New > > >>> > > > > USB > > >>> > > > > > device found, > > idVendor=1d6b, > > >>> idProduct=0001 > > >>> > usb > > >>> > > usb8: New > > >>> > > > USB > > >>> > > > > device > > >>> > > > > > strings: Mfr=3, > > Product=2, > > >>> SerialNumber=1 > > >>> > usb usb8: > > >>> > > > Product: UHCI > > >>> > > > > Host > > >>> > > > > > >>> > > > > >>> > > References > > >>> > > > > >>> > > Visible links > > >>> > > 1. mailto:[20][21][22][24]pasik@xxxxxx > > >>> > > 2. mailto:[21][22][23][25]pasik@xxxxxx > > >>> > > 3. mailto:[22][23][24][26]pasik@xxxxxx > > >>> > > 4. mailto:[23][24][25][27]pasik@xxxxxx > > >>> > > 5. mailto:[24][25][26][28]pasik@xxxxxx > > >>> > > 6. > > >>> > > > >>> > > > > [25][26][27][29]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> > > 7. > > >>> > > > >>> > > > > [26][27][28][30]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> > > 8. mailto:[27][28][29][31]pasik@xxxxxx > > >>> > > 9. > > >>> > > > >>> > > > > [28][29][30][32]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> > > 10. > > >>> > > > >>> > > > > [29][30][31][33]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> > > 11. mailto:[30][31][32][34]pasik@xxxxxx > > >>> > > 12. mailto:[31][32][33][35]pasik@xxxxxx > > >>> > > 13. > > >>> > > > >>> > > > > [32][33][34][36]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> > > 14. > > >>> > > > >>> > > > > [33][34][35][37]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> > > 15. mailto:[34][35][36][38]pasik@xxxxxx > > >>> > > 16. > > >>> > > > >>> > > > > [35][36][37][39]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> > > 17. > > >>> > > > >>> > > > > [36][37][38][40]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> > > 18. mailto:[37][38][39][41]pasik@xxxxxx > > >>> > > > >>> > References > > >>> > > > >>> > Visible links > > >>> > 1. mailto:[39][40][42]pasik@xxxxxx > > >>> > 2. mailto:[40][41][43]pasik@xxxxxx > > >>> > 3. mailto:[41][42][44]pasik@xxxxxx > > >>> > 4. mailto:[42][43][45]pasik@xxxxxx > > >>> > 5. mailto:[43][44][46]pasik@xxxxxx > > >>> > 6. mailto:[44][45][47]pasik@xxxxxx > > >>> > 7. > > >>> > > > > [45][46][48]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> > 8. > > >>> > > > > [46][47][49]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> > 9. mailto:[47][48][50]pasik@xxxxxx > > >>> > 10. > > >>> > > > > [48][49][51]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> > 11. > > >>> > > > > [49][50][52]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> > 12. mailto:[50][51][53]pasik@xxxxxx > > >>> > 13. mailto:[51][52][54]pasik@xxxxxx > > >>> > 14. > > >>> > > > > [52][53][55]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> > 15. > > >>> > > > > [53][54][56]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> > 16. mailto:[54][55][57]pasik@xxxxxx > > >>> > 17. > > >>> > > > > [55][56][58]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> > 18. > > >>> > > > > [56][57][59]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> > 19. mailto:[57][58][60]pasik@xxxxxx > > >>> > 20. mailto:[58][59][61]pasik@xxxxxx > > >>> > 21. mailto:[59][60][62]pasik@xxxxxx > > >>> > 22. mailto:[60][61][63]pasik@xxxxxx > > >>> > 23. mailto:[61][62][64]pasik@xxxxxx > > >>> > 24. mailto:[62][63][65]pasik@xxxxxx > > >>> > 25. > > >>> > > > > [63][64][66]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> > 26. > > >>> > > > > [64][65][67]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> > 27. mailto:[65][66][68]pasik@xxxxxx > > >>> > 28. > > >>> > > > > [66][67][69]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> > 29. > > >>> > > > > [67][68][70]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> > 30. mailto:[68][69][71]pasik@xxxxxx > > >>> > 31. mailto:[69][70][72]pasik@xxxxxx > > >>> > 32. > > >>> > > > > [70][71][73]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> > 33. > > >>> > > > > [71][72][74]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> > 34. mailto:[72][73][75]pasik@xxxxxx > > >>> > 35. > > >>> > > > > [73][74][76]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> > 36. > > >>> > > > > [74][75][77]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> > 37. mailto:[75][76][78]pasik@xxxxxx > > >>> > > >>> References > > >>> > > >>> Visible links > > >>> 1. mailto:[77][79]pasik@xxxxxx > > >>> 2. mailto:[78][80]pasik@xxxxxx > > >>> 3. mailto:[79][81]pasik@xxxxxx > > >>> 4. mailto:[80][82]pasik@xxxxxx > > >>> 5. mailto:[81][83]pasik@xxxxxx > > >>> 6. mailto:[82][84]pasik@xxxxxx > > >>> 7. mailto:[83][85]pasik@xxxxxx > > >>> 8. > > > [84][86]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> 9. > > > > [85][87]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> 10. mailto:[86][88]pasik@xxxxxx > > >>> 11. > > > [87][89]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> 12. > > > > [88][90]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> 13. mailto:[89][91]pasik@xxxxxx > > >>> 14. mailto:[90][92]pasik@xxxxxx > > >>> 15. > > > [91][93]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> 16. > > > > [92][94]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> 17. mailto:[93][95]pasik@xxxxxx > > >>> 18. > > > [94][96]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> 19. > > > > [95][97]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> 20. mailto:[96][98]pasik@xxxxxx > > >>> 21. mailto:[97][99]pasik@xxxxxx > > >>> 22. mailto:[98][100]pasik@xxxxxx > > >>> 23. mailto:[99][101]pasik@xxxxxx > > >>> 24. mailto:[100][102]pasik@xxxxxx > > >>> 25. mailto:[101][103]pasik@xxxxxx > > >>> 26. > > > [102][104]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> 27. > > > > [103][105]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> 28. mailto:[104][106]pasik@xxxxxx > > >>> 29. > > > [105][107]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> 30. > > > > [106][108]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> 31. mailto:[107][109]pasik@xxxxxx > > >>> 32. mailto:[108][110]pasik@xxxxxx > > >>> 33. > > > [109][111]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> 34. > > > > [110][112]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> 35. mailto:[111][113]pasik@xxxxxx > > >>> 36. > > > [112][114]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> 37. > > > > [113][115]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> 38. mailto:[114][116]pasik@xxxxxx > > >>> 39. mailto:[115][117]pasik@xxxxxx > > >>> 40. mailto:[116][118]pasik@xxxxxx > > >>> 41. mailto:[117][119]pasik@xxxxxx > > >>> 42. mailto:[118][120]pasik@xxxxxx > > >>> 43. mailto:[119][121]pasik@xxxxxx > > >>> 44. mailto:[120][122]pasik@xxxxxx > > >>> 45. > > > [121][123]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> 46. > > > > [122][124]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> 47. mailto:[123][125]pasik@xxxxxx > > >>> 48. > > > [124][126]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> 49. > > > > [125][127]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> 50. mailto:[126][128]pasik@xxxxxx > > >>> 51. mailto:[127][129]pasik@xxxxxx > > >>> 52. > > > [128][130]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> 53. > > > > [129][131]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> 54. mailto:[130][132]pasik@xxxxxx > > >>> 55. > > > [131][133]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> 56. > > > > [132][134]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> 57. mailto:[133][135]pasik@xxxxxx > > >>> 58. mailto:[134][136]pasik@xxxxxx > > >>> 59. mailto:[135][137]pasik@xxxxxx > > >>> 60. mailto:[136][138]pasik@xxxxxx > > >>> 61. mailto:[137][139]pasik@xxxxxx > > >>> 62. mailto:[138][140]pasik@xxxxxx > > >>> 63. > > > [139][141]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> 64. > > > > [140][142]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> 65. mailto:[141][143]pasik@xxxxxx > > >>> 66. > > > [142][144]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> 67. > > > > [143][145]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> 68. mailto:[144][146]pasik@xxxxxx > > >>> 69. mailto:[145][147]pasik@xxxxxx > > >>> 70. > > > [146][148]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> 71. > > > > [147][149]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> 72. mailto:[148][150]pasik@xxxxxx > > >>> 73. > > > [149][151]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > >>> 74. > > > > [150][152]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > >>> 75. mailto:[151][153]pasik@xxxxxx > > >>> > > >> > > >> > > > > > > > References > > > > Visible links > > 1. mailto:[154]pasik@xxxxxx > > 2. mailto:[155]pasik@xxxxxx > > 3. mailto:[156]pasik@xxxxxx > > 4. mailto:[157]pasik@xxxxxx > > 5. mailto:[158]pasik@xxxxxx > > 6. mailto:[159]pasik@xxxxxx > > 7. mailto:[160]pasik@xxxxxx > > 8. mailto:[161]pasik@xxxxxx > > 9. > [162]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 10. > > [163]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 11. mailto:[164]pasik@xxxxxx > > 12. > [165]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 13. > > [166]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 14. mailto:[167]pasik@xxxxxx > > 15. mailto:[168]pasik@xxxxxx > > 16. > [169]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 17. > > [170]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 18. mailto:[171]pasik@xxxxxx > > 19. > [172]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 20. > > [173]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 21. mailto:[174]pasik@xxxxxx > > 22. mailto:[175]pasik@xxxxxx > > 23. mailto:[176]pasik@xxxxxx > > 24. mailto:[177]pasik@xxxxxx > > 25. mailto:[178]pasik@xxxxxx > > 26. mailto:[179]pasik@xxxxxx > > 27. > [180]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 28. > > [181]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 29. mailto:[182]pasik@xxxxxx > > 30. > [183]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 31. > > [184]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 32. mailto:[185]pasik@xxxxxx > > 33. mailto:[186]pasik@xxxxxx > > 34. > [187]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 35. > > [188]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 36. mailto:[189]pasik@xxxxxx > > 37. > [190]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 38. > > [191]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 39. mailto:[192]pasik@xxxxxx > > 40. mailto:[193]pasik@xxxxxx > > 41. mailto:[194]pasik@xxxxxx > > 42. mailto:[195]pasik@xxxxxx > > 43. mailto:[196]pasik@xxxxxx > > 44. mailto:[197]pasik@xxxxxx > > 45. mailto:[198]pasik@xxxxxx > > 46. > [199]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 47. > > [200]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 48. mailto:[201]pasik@xxxxxx > > 49. > [202]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 50. > > [203]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 51. mailto:[204]pasik@xxxxxx > > 52. mailto:[205]pasik@xxxxxx > > 53. > [206]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 54. > > [207]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 55. mailto:[208]pasik@xxxxxx > > 56. > [209]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 57. > > [210]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 58. mailto:[211]pasik@xxxxxx > > 59. mailto:[212]pasik@xxxxxx > > 60. mailto:[213]pasik@xxxxxx > > 61. mailto:[214]pasik@xxxxxx > > 62. mailto:[215]pasik@xxxxxx > > 63. mailto:[216]pasik@xxxxxx > > 64. > [217]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 65. > > [218]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 66. mailto:[219]pasik@xxxxxx > > 67. > [220]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 68. > > [221]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 69. mailto:[222]pasik@xxxxxx > > 70. mailto:[223]pasik@xxxxxx > > 71. > [224]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 72. > > [225]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 73. mailto:[226]pasik@xxxxxx > > 74. > [227]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 75. > > [228]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 76. mailto:[229]pasik@xxxxxx > > 77. mailto:[230]pasik@xxxxxx > > 78. mailto:[231]pasik@xxxxxx > > 79. mailto:[232]pasik@xxxxxx > > 80. mailto:[233]pasik@xxxxxx > > 81. mailto:[234]pasik@xxxxxx > > 82. mailto:[235]pasik@xxxxxx > > 83. mailto:[236]pasik@xxxxxx > > 84. > [237]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 85. > > [238]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 86. mailto:[239]pasik@xxxxxx > > 87. > [240]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 88. > > [241]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 89. mailto:[242]pasik@xxxxxx > > 90. mailto:[243]pasik@xxxxxx > > 91. > [244]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 92. > > [245]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 93. mailto:[246]pasik@xxxxxx > > 94. > [247]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 95. > > [248]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 96. mailto:[249]pasik@xxxxxx > > 97. mailto:[250]pasik@xxxxxx > > 98. mailto:[251]pasik@xxxxxx > > 99. mailto:[252]pasik@xxxxxx > > 100. mailto:[253]pasik@xxxxxx > > 101. mailto:[254]pasik@xxxxxx > > 102. > [255]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 103. > > [256]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 104. mailto:[257]pasik@xxxxxx > > 105. > [258]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 106. > > [259]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 107. mailto:[260]pasik@xxxxxx > > 108. mailto:[261]pasik@xxxxxx > > 109. > [262]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 110. > > [263]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 111. mailto:[264]pasik@xxxxxx > > 112. > [265]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 113. > > [266]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 114. mailto:[267]pasik@xxxxxx > > 115. mailto:[268]pasik@xxxxxx > > 116. mailto:[269]pasik@xxxxxx > > 117. mailto:[270]pasik@xxxxxx > > 118. mailto:[271]pasik@xxxxxx > > 119. mailto:[272]pasik@xxxxxx > > 120. mailto:[273]pasik@xxxxxx > > 121. > [274]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 122. > > [275]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 123. mailto:[276]pasik@xxxxxx > > 124. > [277]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 125. > > [278]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 126. mailto:[279]pasik@xxxxxx > > 127. mailto:[280]pasik@xxxxxx > > 128. > [281]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 129. > > [282]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 130. mailto:[283]pasik@xxxxxx > > 131. > [284]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 132. > > [285]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 133. mailto:[286]pasik@xxxxxx > > 134. mailto:[287]pasik@xxxxxx > > 135. mailto:[288]pasik@xxxxxx > > 136. mailto:[289]pasik@xxxxxx > > 137. mailto:[290]pasik@xxxxxx > > 138. mailto:[291]pasik@xxxxxx > > 139. > [292]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 140. > > [293]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 141. mailto:[294]pasik@xxxxxx > > 142. > [295]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 143. > > [296]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 144. mailto:[297]pasik@xxxxxx > > 145. mailto:[298]pasik@xxxxxx > > 146. > [299]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 147. > > [300]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 148. mailto:[301]pasik@xxxxxx > > 149. > [302]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 150. > > [303]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 151. mailto:[304]pasik@xxxxxx > > References > > Visible links > 1. mailto:pasik@xxxxxx > 2. http://wiki.xensource.com/xenwiki/XenParavirtOps > 3. mailto:pasik@xxxxxx > 4. mailto:pasik@xxxxxx > 5. mailto:pasik@xxxxxx > 6. mailto:pasik@xxxxxx > 7. mailto:pasik@xxxxxx > 8. mailto:pasik@xxxxxx > 9. mailto:pasik@xxxxxx > 10. mailto:pasik@xxxxxx > 11. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 12. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 13. mailto:pasik@xxxxxx > 14. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 15. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 16. mailto:pasik@xxxxxx > 17. mailto:pasik@xxxxxx > 18. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 19. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 20. mailto:pasik@xxxxxx > 21. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 22. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 23. mailto:pasik@xxxxxx > 24. mailto:pasik@xxxxxx > 25. mailto:pasik@xxxxxx > 26. mailto:pasik@xxxxxx > 27. mailto:pasik@xxxxxx > 28. mailto:pasik@xxxxxx > 29. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 30. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 31. mailto:pasik@xxxxxx > 32. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 33. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 34. mailto:pasik@xxxxxx > 35. mailto:pasik@xxxxxx > 36. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 37. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 38. mailto:pasik@xxxxxx > 39. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 40. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 41. mailto:pasik@xxxxxx > 42. mailto:pasik@xxxxxx > 43. mailto:pasik@xxxxxx > 44. mailto:pasik@xxxxxx > 45. mailto:pasik@xxxxxx > 46. mailto:pasik@xxxxxx > 47. mailto:pasik@xxxxxx > 48. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 49. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 50. mailto:pasik@xxxxxx > 51. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 52. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 53. mailto:pasik@xxxxxx > 54. mailto:pasik@xxxxxx > 55. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 56. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 57. mailto:pasik@xxxxxx > 58. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 59. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 60. mailto:pasik@xxxxxx > 61. mailto:pasik@xxxxxx > 62. mailto:pasik@xxxxxx > 63. mailto:pasik@xxxxxx > 64. mailto:pasik@xxxxxx > 65. mailto:pasik@xxxxxx > 66. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 67. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 68. mailto:pasik@xxxxxx > 69. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 70. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 71. mailto:pasik@xxxxxx > 72. mailto:pasik@xxxxxx > 73. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 74. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 75. mailto:pasik@xxxxxx > 76. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 77. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 78. mailto:pasik@xxxxxx > 79. mailto:pasik@xxxxxx > 80. mailto:pasik@xxxxxx > 81. mailto:pasik@xxxxxx > 82. mailto:pasik@xxxxxx > 83. mailto:pasik@xxxxxx > 84. mailto:pasik@xxxxxx > 85. mailto:pasik@xxxxxx > 86. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 87. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 88. mailto:pasik@xxxxxx > 89. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 90. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 91. mailto:pasik@xxxxxx > 92. mailto:pasik@xxxxxx > 93. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 94. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 95. mailto:pasik@xxxxxx > 96. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 97. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 98. mailto:pasik@xxxxxx > 99. mailto:pasik@xxxxxx > 100. mailto:pasik@xxxxxx > 101. mailto:pasik@xxxxxx > 102. mailto:pasik@xxxxxx > 103. mailto:pasik@xxxxxx > 104. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 105. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 106. mailto:pasik@xxxxxx > 107. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 108. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 109. mailto:pasik@xxxxxx > 110. mailto:pasik@xxxxxx > 111. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 112. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 113. mailto:pasik@xxxxxx > 114. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 115. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 116. mailto:pasik@xxxxxx > 117. mailto:pasik@xxxxxx > 118. mailto:pasik@xxxxxx > 119. mailto:pasik@xxxxxx > 120. mailto:pasik@xxxxxx > 121. mailto:pasik@xxxxxx > 122. mailto:pasik@xxxxxx > 123. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 124. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 125. mailto:pasik@xxxxxx > 126. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 127. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 128. mailto:pasik@xxxxxx > 129. mailto:pasik@xxxxxx > 130. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 131. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 132. mailto:pasik@xxxxxx > 133. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 134. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 135. mailto:pasik@xxxxxx > 136. mailto:pasik@xxxxxx > 137. mailto:pasik@xxxxxx > 138. mailto:pasik@xxxxxx > 139. mailto:pasik@xxxxxx > 140. mailto:pasik@xxxxxx > 141. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 142. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 143. mailto:pasik@xxxxxx > 144. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 145. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 146. mailto:pasik@xxxxxx > 147. mailto:pasik@xxxxxx > 148. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 149. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 150. mailto:pasik@xxxxxx > 151. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 152. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 153. mailto:pasik@xxxxxx > 154. mailto:pasik@xxxxxx > 155. mailto:pasik@xxxxxx > 156. mailto:pasik@xxxxxx > 157. mailto:pasik@xxxxxx > 158. mailto:pasik@xxxxxx > 159. mailto:pasik@xxxxxx > 160. mailto:pasik@xxxxxx > 161. mailto:pasik@xxxxxx > 162. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 163. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 164. mailto:pasik@xxxxxx > 165. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 166. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 167. mailto:pasik@xxxxxx > 168. mailto:pasik@xxxxxx > 169. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 170. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 171. mailto:pasik@xxxxxx > 172. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 173. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 174. mailto:pasik@xxxxxx > 175. mailto:pasik@xxxxxx > 176. mailto:pasik@xxxxxx > 177. mailto:pasik@xxxxxx > 178. mailto:pasik@xxxxxx > 179. mailto:pasik@xxxxxx > 180. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 181. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 182. mailto:pasik@xxxxxx > 183. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 184. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 185. mailto:pasik@xxxxxx > 186. mailto:pasik@xxxxxx > 187. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 188. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 189. mailto:pasik@xxxxxx > 190. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 191. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 192. mailto:pasik@xxxxxx > 193. mailto:pasik@xxxxxx > 194. mailto:pasik@xxxxxx > 195. mailto:pasik@xxxxxx > 196. mailto:pasik@xxxxxx > 197. mailto:pasik@xxxxxx > 198. mailto:pasik@xxxxxx > 199. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 200. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 201. mailto:pasik@xxxxxx > 202. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 203. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 204. mailto:pasik@xxxxxx > 205. mailto:pasik@xxxxxx > 206. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 207. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 208. mailto:pasik@xxxxxx > 209. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 210. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 211. mailto:pasik@xxxxxx > 212. mailto:pasik@xxxxxx > 213. mailto:pasik@xxxxxx > 214. mailto:pasik@xxxxxx > 215. mailto:pasik@xxxxxx > 216. mailto:pasik@xxxxxx > 217. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 218. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 219. mailto:pasik@xxxxxx > 220. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 221. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 222. mailto:pasik@xxxxxx > 223. mailto:pasik@xxxxxx > 224. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 225. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 226. mailto:pasik@xxxxxx > 227. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 228. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 229. mailto:pasik@xxxxxx > 230. mailto:pasik@xxxxxx > 231. mailto:pasik@xxxxxx > 232. mailto:pasik@xxxxxx > 233. mailto:pasik@xxxxxx > 234. mailto:pasik@xxxxxx > 235. mailto:pasik@xxxxxx > 236. mailto:pasik@xxxxxx > 237. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 238. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 239. mailto:pasik@xxxxxx > 240. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 241. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 242. mailto:pasik@xxxxxx > 243. mailto:pasik@xxxxxx > 244. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 245. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 246. mailto:pasik@xxxxxx > 247. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 248. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 249. mailto:pasik@xxxxxx > 250. mailto:pasik@xxxxxx > 251. mailto:pasik@xxxxxx > 252. mailto:pasik@xxxxxx > 253. mailto:pasik@xxxxxx > 254. mailto:pasik@xxxxxx > 255. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 256. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 257. mailto:pasik@xxxxxx > 258. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 259. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 260. mailto:pasik@xxxxxx > 261. mailto:pasik@xxxxxx > 262. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 263. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 264. mailto:pasik@xxxxxx > 265. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 266. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 267. mailto:pasik@xxxxxx > 268. mailto:pasik@xxxxxx > 269. mailto:pasik@xxxxxx > 270. mailto:pasik@xxxxxx > 271. mailto:pasik@xxxxxx > 272. mailto:pasik@xxxxxx > 273. mailto:pasik@xxxxxx > 274. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 275. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 276. mailto:pasik@xxxxxx > 277. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 278. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 279. mailto:pasik@xxxxxx > 280. mailto:pasik@xxxxxx > 281. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 282. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 283. mailto:pasik@xxxxxx > 284. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 285. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 286. mailto:pasik@xxxxxx > 287. mailto:pasik@xxxxxx > 288. mailto:pasik@xxxxxx > 289. mailto:pasik@xxxxxx > 290. mailto:pasik@xxxxxx > 291. mailto:pasik@xxxxxx > 292. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 293. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 294. mailto:pasik@xxxxxx > 295. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 296. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 297. mailto:pasik@xxxxxx > 298. mailto:pasik@xxxxxx > 299. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 300. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 301. mailto:pasik@xxxxxx > 302. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 303. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 304. mailto:pasik@xxxxxx _______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-users
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |