|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] ATI/AMD VGA passthru report
On Mon, May 07, 2012 at 01:45:23PM +0200, Pavel MatÄja wrote: > Hi, > I'm trying to run AMD VGA passthru on latest XEN unstable with latest kernel. > I already have working setup with ancient xen-devel 4.2 and 2.6.32.x xenified > kernel. See attached log. > > So I tried just to update and patch xen and kernel, but I had no luck so far. > > Xen has ati_vbios_patch_respin.txt sent to xen-devel by Wei Huang recently. > http://lists.xen.org/archives/html/xen-devel/2012-04/msg00291.html > > I tried two kernels > testing-3.5-with-extra and xen/next-3.2 from > git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen.git > and > git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > Both with ioperm opcode patch which is required by the ATI patch. See > attachement. > > The xen/next-3.2 branch kernel was able to start booting windows. > With Catalyst driver installed I just saw bluescreen during Windows boot. > Without Catalyst driver Windows were able to boot but Windows ended frozen or > USB was not working. It was hard to tell because input devices had no > response > at all. > > The testing-3.5-with-extra (reported as 3.4.0-rc4) just crashed dom0 kernel > during Windows boot. I guess I have to rework the io_bitmap patch somehow. When you say 'io_bitmap' patch are you referring to these ones: 70a357d xen: implement IO permission bitmap 0c596c5 x86/paravirt: paravirtualize IO permission bitmap 93b7a2a x86: demacro set_iopl_mask() ? I don't think those are in that tag. They are in the kitchensink - #testing - does it work with that branch? The next-3.2 is a bit old. I should actually delete it. > > (XEN) Xen version 4.2-unstable (root@xxxxxxxxxx) (gcc version 4.4.5 (Debian > 4.4.5-8) ) Sun Feb 5 15:55:33 CET 2012 > (XEN) Latest ChangeSet: Thu May 05 17:40:34 2011 +0100 23300:4b0692880dfa > (XEN) Console output is synchronous. > (XEN) Bootloader: GRUB 1.98+20100804-14+squeeze1 > (XEN) Command line: placeholder dom0_mem=2G dom0_max_vcpus=6 loglvl=all > guest_loglvl=all sync_console com1=115200,8n1,0xac00 console=com1 > (XEN) Video information: > (XEN) VGA is text mode 80x25, font 8x16 > (XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds > (XEN) Disc information: > (XEN) Found 1 MBR signatures > (XEN) Found 1 EDD information structures > (XEN) Xen-e820 RAM map: > (XEN) 0000000000000000 - 000000000009ac00 (usable) > (XEN) 000000000009ac00 - 00000000000a0000 (reserved) > (XEN) 00000000000e4000 - 0000000000100000 (reserved) > (XEN) 0000000000100000 - 00000000cfe80000 (usable) > (XEN) 00000000cfe80000 - 00000000cfe98000 (ACPI data) > (XEN) 00000000cfe98000 - 00000000cfec0000 (ACPI NVS) > (XEN) 00000000cfec0000 - 00000000cff00000 (reserved) > (XEN) 00000000ffe00000 - 0000000100000000 (reserved) > (XEN) 0000000100000000 - 0000000230000000 (usable) > (XEN) ACPI: RSDP 000FBF20, 0024 (r2 ACPIAM) > (XEN) ACPI: XSDT CFE80100, 005C (r1 102811 XSDT1740 20111028 MSFT 97) > (XEN) ACPI: FACP CFE80290, 00F4 (r3 102811 FACP1740 20111028 MSFT 97) > (XEN) ACPI: DSDT CFE80470, E6E3 (r1 A1595 A1595000 0 INTL 20060113) > (XEN) ACPI: FACS CFE98000, 0040 > (XEN) ACPI: APIC CFE80390, 0098 (r1 102811 APIC1740 20111028 MSFT 97) > (XEN) ACPI: MCFG CFE80430, 003C (r1 102811 OEMMCFG 20111028 MSFT 97) > (XEN) ACPI: OEMB CFE98040, 0072 (r1 102811 OEMB1740 20111028 MSFT 97) > (XEN) ACPI: HPET CFE8F8C0, 0038 (r1 102811 OEMHPET 20111028 MSFT 97) > (XEN) ACPI: IVRS CFE8F900, 00E0 (r1 AMD RD890S 202031 AMD 0) > (XEN) ACPI: SSDT CFE8F9E0, 0E10 (r1 A M I POWERNOW 1 AMD 1) > (XEN) System RAM: 8190MB (8386664kB) > (XEN) No NUMA configuration found > (XEN) Faking a node at 0000000000000000-0000000230000000 > (XEN) Domain heap initialised > (XEN) found SMP MP-table at 000ff780 > (XEN) DMI present. > (XEN) Using APIC driver default > (XEN) ACPI: PM-Timer IO Port: 0x808 > (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[804,0], pm1x_evt[800,0] > (XEN) ACPI: wakeup_vec[cfe9800c], vec_size[20] > (XEN) ACPI: Local APIC address 0xfee00000 > (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > (XEN) Processor #0 0:10 APIC version 16 > (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) > (XEN) Processor #1 0:10 APIC version 16 > (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) > (XEN) Processor #2 0:10 APIC version 16 > (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) > (XEN) Processor #3 0:10 APIC version 16 > (XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled) > (XEN) Processor #4 0:10 APIC version 16 > (XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) > (XEN) Processor #5 0:10 APIC version 16 > (XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled) > (XEN) ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0]) > (XEN) IOAPIC[0]: apic_id 6, version 33, address 0xfec00000, GSI 0-23 > (XEN) ACPI: IOAPIC (id[0x07] address[0xfec20000] gsi_base[24]) > (XEN) IOAPIC[1]: apic_id 7, version 33, address 0xfec20000, GSI 24-55 > (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) > (XEN) ACPI: IRQ0 used by override. > (XEN) ACPI: IRQ2 used by override. > (XEN) ACPI: IRQ9 used by override. > (XEN) Enabling APIC mode: Flat. Using 2 I/O APICs > (XEN) ACPI: HPET id: 0x8300 base: 0xfed00000 > (XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 > (XEN) PCI: Not using MMCONFIG. > (XEN) Table is not found! > (XEN) Using ACPI (MADT) for SMP configuration information > (XEN) IRQ limits: 56 GSI, 1112 MSI/MSI-X > (XEN) Using scheduler: SMP Credit Scheduler (credit) > (XEN) Detected 3010.254 MHz processor. > (XEN) Initing memory sharing. > (XEN) AMD Fam10h machine check reporting enabled > (XEN) AMD-Vi: IOMMU 0 Enabled. > (XEN) I/O virtualisation enabled > (XEN) - Dom0 mode: Relaxed > (XEN) ENABLING IO-APIC IRQs > (XEN) -> Using new ACK method > (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1 > (XEN) Platform timer is 14.318MHz HPET > Ã(XEN) Allocated console ring of 64 KiB. > (XEN) HVM: ASIDs enabled. > (XEN) SVM: Supported advanced features: > (XEN) - Nested Page Tables (NPT) > (XEN) - Last Branch Record (LBR) Virtualisation > (XEN) - Next-RIP Saved on #VMEXIT > (XEN) - Pause-Intercept Filter > (XEN) HVM: SVM enabled > (XEN) HVM: Hardware Assisted Paging detected. > (XEN) Brought up 6 CPUs > (XEN) HPET's MSI mode hasn't been supported when Interrupt Remapping is > enabled. > (XEN) ACPI sleep modes: S3 > (XEN) MCA: Use hw thresholding to adjust polling frequency > (XEN) mcheck_poll: Machine check polling timer started. > (XEN) Xenoprofile: Failed to setup IBS LVT offset, IBSCTL = 0xffffffff > (XEN) *** LOADING DOMAIN 0 *** > (XEN) elf_parse_binary: phdr: paddr=0x1000000 memsz=0x77c000 > (XEN) elf_parse_binary: phdr: paddr=0x177c000 memsz=0x8da88 > (XEN) elf_parse_binary: phdr: paddr=0x180a000 memsz=0x8c8 > (XEN) elf_parse_binary: phdr: paddr=0x180b000 memsz=0x14a58 > (XEN) elf_parse_binary: phdr: paddr=0x1820000 memsz=0x212000 > (XEN) elf_parse_binary: memory: 0x1000000 -> 0x1a32000 > (XEN) elf_xen_parse_note: GUEST_OS = "linux" > (XEN) elf_xen_parse_note: GUEST_VERSION = "2.6" > (XEN) elf_xen_parse_note: XEN_VERSION = "xen-3.0" > (XEN) elf_xen_parse_note: VIRT_BASE = 0xffffffff80000000 > (XEN) elf_xen_parse_note: ENTRY = 0xffffffff81820200 > (XEN) elf_xen_parse_note: HYPERCALL_PAGE = 0xffffffff81009000 > (XEN) elf_xen_parse_note: FEATURES = > "!writable_page_tables|pae_pgdir_above_4gb" > (XEN) elf_xen_parse_note: PAE_MODE = "yes" > (XEN) elf_xen_parse_note: LOADER = "generic" > (XEN) elf_xen_parse_note: unknown xen elf note (0xd) > (XEN) elf_xen_parse_note: SUSPEND_CANCEL = 0x1 > (XEN) elf_xen_parse_note: HV_START_LOW = 0xffff800000000000 > (XEN) elf_xen_parse_note: PADDR_OFFSET = 0x0 > (XEN) elf_xen_addr_calc_check: addresses: > (XEN) virt_base = 0xffffffff80000000 > (XEN) elf_paddr_offset = 0x0 > (XEN) virt_offset = 0xffffffff80000000 > (XEN) virt_kstart = 0xffffffff81000000 > (XEN) virt_kend = 0xffffffff81a32000 > (XEN) virt_entry = 0xffffffff81820200 > (XEN) p2m_base = 0xffffffffffffffff > (XEN) Xen kernel: 64-bit, lsb, compat32 > (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x1a32000 > (XEN) PHYSICAL MEMORY ARRANGEMENT: > (XEN) Dom0 alloc.: 0000000224000000->0000000228000000 (506263 pages to be > allocated) > (XEN) Init. ramdisk: 000000022f997000->000000022ffff600 > (XEN) VIRTUAL MEMORY ARRANGEMENT: > (XEN) Loaded kernel: ffffffff81000000->ffffffff81a32000 > (XEN) Init. ramdisk: ffffffff81a32000->ffffffff8209a600 > (XEN) Phys-Mach map: ffffffff8209b000->ffffffff8249b000 > (XEN) Start info: ffffffff8249b000->ffffffff8249b4b4 > (XEN) Page tables: ffffffff8249c000->ffffffff824b3000 > (XEN) Boot stack: ffffffff824b3000->ffffffff824b4000 > (XEN) TOTAL: ffffffff80000000->ffffffff82800000 > (XEN) ENTRY ADDRESS: ffffffff81820200 > (XEN) Dom0 has maximum 6 VCPUs > (XEN) elf_load_binary: phdr 0 at 0xffffffff81000000 -> 0xffffffff8177c000 > (XEN) elf_load_binary: phdr 1 at 0xffffffff8177c000 -> 0xffffffff81809a88 > (XEN) elf_load_binary: phdr 2 at 0xffffffff8180a000 -> 0xffffffff8180a8c8 > (XEN) elf_load_binary: phdr 3 at 0xffffffff8180b000 -> 0xffffffff8181fa58 > (XEN) elf_load_binary: phdr 4 at 0xffffffff81820000 -> 0xffffffff818b3000 > (XEN) Scrubbing Free RAM: > .............................................................done. > (XEN) Std. Loglevel: All > (XEN) Guest Loglevel: All > (XEN) ********************************************** > (XEN) ******* WARNING: CONSOLE OUTPUT IS SYNCHRONOUS > (XEN) ******* This option is intended to aid debugging of Xen by ensuring > (XEN) ******* that all output is synchronously delivered on the serial line. > (XEN) ******* However it can introduce SIGNIFICANT latencies and affect > (XEN) ******* timekeeping. It is NOT recommended for production use! > (XEN) ********************************************** > (XEN) 3... 2... 1... > (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to > Xen) > (XEN) Freed 236kB init memory. > mapping kernel into physical memory > Xen: setup ISA identity maps > about to get started... > ERROR: Unable to locate IOAPIC for GSI 2 > ERROR: Unable to locate IOAPIC for GSI 9 > (XEN) traps.c:2405:d0 Domain attempted WRMSR 00000000c0010004 from > 0x000024a74db06404 to 0x0000000000000000. > (XEN) traps.c:2405:d0 Domain attempted WRMSR 00000000c0010000 from > 0x000003061a0effc9 to 0x0000000000430076. > ERROR: Unable to locate IOAPIC for GSI 9 > (XEN) PCI add device 00:00.0 > (XEN) PCI add device 00:00.2 > (XEN) PCI add device 00:02.0 > (XEN) PCI add device 00:04.0 > (XEN) PCI add device 00:05.0 > (XEN) PCI add device 00:06.0 > (XEN) PCI add device 00:07.0 > (XEN) PCI add device 00:0d.0 > (XEN) PCI add device 00:11.0 > (XEN) PCI add device 00:12.0 > (XEN) PCI add device 00:12.2 > (XEN) PCI add device 00:13.0 > (XEN) PCI add device 00:13.2 > (XEN) PCI add device 00:14.0 > (XEN) PCI add device 00:14.2 > (XEN) PCI add device 00:14.3 > (XEN) PCI add device 00:14.4 > (XEN) PCI add device 00:14.5 > (XEN) PCI add device 00:16.0 > (XEN) PCI add device 00:16.2 > (XEN) PCI add device 00:18.0 > (XEN) PCI add device 00:18.1 > (XEN) PCI add device 00:18.2 > (XEN) PCI add device 00:18.3 > (XEN) PCI add device 00:18.4 > (XEN) PCI add device 07:00.0 > (XEN) PCI add device 07:00.1 > (XEN) PCI add device 06:00.0 > (XEN) PCI add device 06:00.1 > (XEN) PCI add device 05:00.0 > (XEN) PCI add device 04:00.0 > (XEN) PCI add device 03:00.0 > (XEN) PCI add device 02:00.0 > (XEN) PCI add device 02:00.1 > registering netback > IT87 WDT: Unknown Chip found, Chip 8721 Revision 0001 > [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found. > [Firmware Bug]: powernow-k8: Try again with latest BIOS. > Loading, please wait... > INIT: version 2.88 booting > Using makefile-style concurrent boot in runlevel S. > Starting the hotplug events dispatcher: udevd. > Synthesizing the initial hotplug events...done. > Waiting for /dev to be fully populated...udevd-work[1437]: kernel-provided > name 'blktap-control' and NAME= 'xen/blktap-2/control' disagree, please use > SYMLINK+= or change the kernel to provide the proper name > > done. > Setting preliminary keymap...done. > Activating swap...done. > Checking root file system...fsck from util-linux-ng 2.17.2 > HOWTO_ROOT: clean, 95054/1419840 files, 731180/5679104 blocks (check in 4 > mounts) > done. > Loading kernel modules...done. > Cleaning up ifupdown.... > Setting up networking.... > Setting up LVM Volume Groups Reading all physical volumes. This may take a > while... > Found volume group "lemrouch" using metadata type lvm2 > 4 logical volume(s) in volume group "lemrouch" now active > . > Activating lvm and md swap...done. > Checking file systems...fsck from util-linux-ng 2.17.2 > done. > Mounting local filesystems...done. > Activating swapfile swap...done. > Cleaning up temporary files.... > Setting kernel variables ...done. > Configuring network interfaces...done. > Cleaning up temporary files.... > Setting console screen modes. > Rcannot (un)set powersave mode > Skipping font and keymap setup (handled by console-setup). > Setting up console font and keymap...done. > INIT: Entering runlevel: 2 > Using makefile-style concurrent boot in runlevel 2. > acpid: starting up with proc fs > > acpid: 1 rule loaded > > acpid: waiting for events: event logging is off > > Starting ACPI services.... > Starting system message bus: dbus. > Starting periodic command scheduler: cron. > Starting OpenBSD Secure Shell server: sshd. > Starting xenstored...XENBUS: Unable to read cpu state > XENBUS: Unable to read cpu state > XENBUS: Unable to read cpu state > XENBUS: Unable to read cpu state > XENBUS: Unable to read cpu state > XENBUS: Unable to read cpu state > > Setting domain 0 name... > Starting xenconsoled... > BLKTAPCTRL[2168]: blktapctrl.c:790: blktapctrl: v1.0.0 > > BLKTAPCTRL[2168]: blktapctrl.c:792: Found driver: [raw image (aio)] > > BLKTAPCTRL[2168]: blktapctrl.c:792: Found driver: [raw image (sync)] > > BLKTAPCTRL[2168]: blktapctrl.c:792: Found driver: [vmware image (vmdk)] > > BLKTAPCTRL[2168]: blktapctrl.c:792: Found driver: [ramdisk image (ram)] > > BLKTAPCTRL[2168]: blktapctrl.c:792: Found driver: [qcow disk (qcow)] > > BLKTAPCTRL[2168]: blktapctrl.c:792: Found driver: [qcow2 disk (qcow2)] > > BLKTAPCTRL[2168]: blktapctrl_linux.c:86: blktap0 open failed > > BLKTAPCTRL[2168]: blktapctrl.c:859: couldn't open blktap interface > > BLKTAPCTRL[2168]: blktapctrl.c:922: Unable to start blktapctrl > > (XEN) PCI remove device 00:12.2 > (XEN) PCI add device 00:12.2 > /usr/local/bin/xen_start.sh: line 15: > /sys/bus/pci/devices/0000:07:00.0/driver/unbind: No such file or directory > Using config file "/etc/xen/windows". > (XEN) domctl.c:1042:d0 ioport_map:add f_gport=3b0 f_mport=3b0 np=c > (XEN) domctl.c:986:d0 memory_map:add: gfn=a0 mfn=a0 nr_mfns=20 > (XEN) domctl.c:1042:d0 ioport_map:add f_gport=3c0 f_mport=3c0 np=3 > (XEN) domctl.c:1042:d0 ioport_map:add f_gport=3c4 f_mport=3c4 np=1c > (XEN) HVM1: HVM Loader > (XEN) HVM1: Detected Xen v4.2-unstable > (XEN) HVM1: Xenbus rings @0xfeffc000, event channel 7 > Started domain windows (id=1)(XEN) HVM1: System requested ROMBIOS > > (XEN) HVM1: CPU speed is 3010 MHz > (XEN) irq.c:258: Dom1 PCI link 0 changed 0 -> 5 > (XEN) HVM1: PCI-ISA link 0 routed to IRQ5 > (XEN) irq.c:258: Dom1 PCI link 1 changed 0 -> 10 > (XEN) HVM1: PCI-ISA link 1 routed to IRQ10 > (XEN) irq.c:258: Dom1 PCI link 2 changed 0 -> 11 > (XEN) HVM1: PCI-ISA link 2 routed to IRQ11 > (XEN) irq.c:258: Dom1 PCI link 3 changed 0 -> 5 > (XEN) HVM1: PCI-ISA link 3 routed to IRQ5 > (XEN) HVM1: pci dev 01:3 INTA->IRQ10 > (XEN) HVM1: pci dev 03:0 INTA->IRQ5 > (XEN) HVM1: pci dev 04:0 INTA->IRQ5 > (XEN) HVM1: pci dev 05:0 INTA->IRQ10 > (XEN) HVM1: pci dev 06:0 INTB->IRQ5 > (XEN) HVM1: pci dev 07:0 INTA->IRQ5 > (XEN) HVM1: pci dev 08:0 INTB->IRQ10 > (XEN) HVM1: pci dev 09:0 INTA->IRQ10 > (XEN) HVM1: pci dev 05:0 bar 10 size 10000000: e000000c > (XEN) domctl.c:986:d0 memory_map:add: gfn=e0000 mfn=d0000 nr_mfns=10000 > (XEN) HVM1: pci dev 03:0 bar 14 size 01000000: f0000008 > (XEN) HVM1: pci dev 04:0 bar 10 size 00020000: f1000000 > (XEN) domctl.c:986:d0 memory_map:add: gfn=f1020 mfn=fe9e0 nr_mfns=20 > (XEN) HVM1: pci dev 05:0 bar 18 size 00020000: f1020004 > (XEN) HVM1: pci dev 05:0 bar 30 size 00020000: f1040000 > (XEN) HVM1: pci dev 06:0 bar 10 size 00004000: f1060004 > (XEN) domctl.c:986:d0 memory_map:add: gfn=f1060 mfn=fe9bc nr_mfns=4 > (XEN) HVM1: pci dev 09:0 bar 10 size 00004000: f1064004 > (XEN) domctl.c:986:d0 memory_map:add: gfn=f1064 mfn=fe3f8 nr_mfns=4 > (XEN) HVM1: pci dev 07:0 bar 10 size 00001000: f1068000 > (XEN) domctl.c:986:d0 memory_map:add: gfn=f1068 mfn=fe3f7 nr_mfns=1 > (XEN) HVM1: pci dev 08:0 bar 10 size 00001000: f1069000 > (XEN) domctl.c:986:d0 memory_map:add: gfn=f1069 mfn=f0000 nr_mfns=1 > (XEN) HVM1: pci dev 03:0 bar 10 size 00000100: 0000c001 > (XEN) HVM1: pci dev 05:0 bar 20 size 00000100: 0000c101 > (XEN) HVM1: pci dev 04:0 bar 14 size 00000040: 0000c201 > (XEN) HVM1: pci dev 01:1 bar 20 size 00000010: 0000c241 > (XEN) HVM1: Multiprocessor initialisation: > (XEN) HVM1: - CPU0 ... 48-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... > done. > (XEN) HVM1: - CPU1 ... 48-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... > done. > (XEN) HVM1: - CPU2 ... 48-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... > done. > (XEN) HVM1: - CPU3 ... 48-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... > done. > (XEN) HVM1: - CPU4 ... 48-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... > done. > (XEN) HVM1: - CPU5 ... 48-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... > done. > (XEN) HVM1: Testing HVM environment: > (XEN) HVM1: - REP INSB across page boundaries ... passed > (XEN) HVM1: - GS base MSRs and SWAPGS ... passed > (XEN) HVM1: Passed 2 of 2 tests > (XEN) HVM1: Writing SMBIOS tables ... > (XEN) domctl.c:1042:d0 ioport_map:add f_gport=3b0 f_mport=3b0 np=c > (XEN) domctl.c:986:d0 memory_map:add: gfn=a0 mfn=a0 nr_mfns=20 > (XEN) domctl.c:1042:d0 ioport_map:add f_gport=3c0 f_mport=3c0 np=3 > (XEN) domctl.c:1042:d0 ioport_map:add f_gport=3c4 f_mport=3c4 np=1c > (XEN) HVM2: HVM Loader > (XEN) HVM2: Detected Xen v4.2-unstable > (XEN) HVM2: Xenbus rings @0xfeffc000, event channel 7 > (XEN) HVM2: System requested ROMBIOS > (XEN) HVM2: CPU speed is 3010 MHz > (XEN) irq.c:258: Dom2 PCI link 0 changed 0 -> 5 > (XEN) HVM2: PCI-ISA link 0 routed to IRQ5 > (XEN) irq.c:258: Dom2 PCI link 1 changed 0 -> 10 > (XEN) HVM2: PCI-ISA link 1 routed to IRQ10 > (XEN) irq.c:258: Dom2 PCI link 2 changed 0 -> 11 > (XEN) HVM2: PCI-ISA link 2 routed to IRQ11 > (XEN) irq.c:258: Dom2 PCI link 3 changed 0 -> 5 > (XEN) HVM2: PCI-ISA link 3 routed to IRQ5 > (XEN) HVM2: pci dev 01:3 INTA->IRQ10 > (XEN) HVM2: pci dev 03:0 INTA->IRQ5 > (XEN) HVM2: pci dev 04:0 INTA->IRQ5 > (XEN) HVM2: pci dev 05:0 INTA->IRQ10 > (XEN) HVM2: pci dev 06:0 INTB->IRQ5 > (XEN) HVM2: pci dev 07:0 INTA->IRQ5 > (XEN) HVM2: pci dev 08:0 INTB->IRQ10 > (XEN) HVM2: pci dev 09:0 INTA->IRQ10 > (XEN) HVM2: pci dev 05:0 bar 10 size 10000000: e000000c > (XEN) domctl.c:986:d0 memory_map:add: gfn=e0000 mfn=d0000 nr_mfns=10000 > (XEN) HVM2: pci dev 03:0 bar 14 size 01000000: f0000008 > (XEN) HVM2: pci dev 04:0 bar 10 size 00020000: f1000000 > (XEN) domctl.c:986:d0 memory_map:add: gfn=f1020 mfn=fe9e0 nr_mfns=20 > (XEN) HVM2: pci dev 05:0 bar 18 size 00020000: f1020004 > (XEN) HVM2: pci dev 05:0 bar 30 size 00020000: f1040000 > (XEN) HVM2: pci dev 06:0 bar 10 size 00004000: f1060004 > (XEN) domctl.c:986:d0 memory_map:add: gfn=f1060 mfn=fe9bc nr_mfns=4 > (XEN) HVM2: pci dev 09:0 bar 10 size 00004000: f1064004 > (XEN) domctl.c:986:d0 memory_map:add: gfn=f1064 mfn=fe3f8 nr_mfns=4 > (XEN) HVM2: pci dev 07:0 bar 10 size 00001000: f1068000 > (XEN) domctl.c:986:d0 memory_map:add: gfn=f1068 mfn=fe3f7 nr_mfns=1 > (XEN) HVM2: pci dev 08:0 bar 10 size 00001000: f1069000 > (XEN) domctl.c:986:d0 memory_map:add: gfn=f1069 mfn=f0000 nr_mfns=1 > (XEN) HVM2: pci dev 03:0 bar 10 size 00000100: 0000c001 > (XEN) HVM2: pci dev 05:0 bar 20 size 00000100: 0000c101 > (XEN) HVM2: pci dev 04:0 bar 14 size 00000040: 0000c201 > (XEN) HVM2: pci dev 01:1 bar 20 size 00000010: 0000c241 > (XEN) HVM2: Multiprocessor initialisation: > (XEN) HVM2: - CPU0 ... 48-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... > done. > (XEN) HVM2: - CPU1 ... 48-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... > done. > (XEN) HVM2: - CPU2 ... 48-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... > done. > (XEN) HVM2: - CPU3 ... 48-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... > done. > (XEN) HVM2: - CPU4 ... 48-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... > done. > (XEN) HVM2: - CPU5 ... 48-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... > done. > (XEN) HVM2: Testing HVM environment: > (XEN) HVM2: - REP INSB across page boundaries ... passed > (XEN) HVM2: - GS base MSRs and SWAPGS ... passed > (XEN) HVM2: Passed 2 of 2 tests > (XEN) HVM2: Writing SMBIOS tables ... > (XEN) domctl.c:1042:d0 ioport_map:add f_gport=3b0 f_mport=3b0 np=c > (XEN) domctl.c:986:d0 memory_map:add: gfn=a0 mfn=a0 nr_mfns=20 > (XEN) domctl.c:1042:d0 ioport_map:add f_gport=3c0 f_mport=3c0 np=3 > (XEN) domctl.c:1042:d0 ioport_map:add f_gport=3c4 f_mport=3c4 np=1c > (XEN) HVM3: HVM Loader > (XEN) HVM3: Detected Xen v4.2-unstable > (XEN) HVM3: Xenbus rings @0xfeffc000, event channel 7 > (XEN) HVM3: System requested ROMBIOS > (XEN) HVM3: CPU speed is 3010 MHz > (XEN) irq.c:258: Dom3 PCI link 0 changed 0 -> 5 > (XEN) HVM3: PCI-ISA link 0 routed to IRQ5 > (XEN) irq.c:258: Dom3 PCI link 1 changed 0 -> 10 > (XEN) HVM3: PCI-ISA link 1 routed to IRQ10 > (XEN) irq.c:258: Dom3 PCI link 2 changed 0 -> 11 > (XEN) HVM3: PCI-ISA link 2 routed to IRQ11 > (XEN) irq.c:258: Dom3 PCI link 3 changed 0 -> 5 > (XEN) HVM3: PCI-ISA link 3 routed to IRQ5 > (XEN) HVM3: pci dev 01:3 INTA->IRQ10 > (XEN) HVM3: pci dev 03:0 INTA->IRQ5 > (XEN) HVM3: pci dev 04:0 INTA->IRQ5 > (XEN) HVM3: pci dev 05:0 INTA->IRQ10 > (XEN) HVM3: pci dev 06:0 INTB->IRQ5 > (XEN) HVM3: pci dev 07:0 INTA->IRQ5 > (XEN) HVM3: pci dev 08:0 INTB->IRQ10 > (XEN) HVM3: pci dev 09:0 INTA->IRQ10 > (XEN) HVM3: pci dev 05:0 bar 10 size 10000000: e000000c > (XEN) domctl.c:986:d0 memory_map:add: gfn=e0000 mfn=d0000 nr_mfns=10000 > (XEN) HVM3: pci dev 03:0 bar 14 size 01000000: f0000008 > (XEN) HVM3: pci dev 04:0 bar 10 size 00020000: f1000000 > (XEN) domctl.c:986:d0 memory_map:add: gfn=f1020 mfn=fe9e0 nr_mfns=20 > (XEN) HVM3: pci dev 05:0 bar 18 size 00020000: f1020004 > (XEN) HVM3: pci dev 05:0 bar 30 size 00020000: f1040000 > (XEN) HVM3: pci dev 06:0 bar 10 size 00004000: f1060004 > (XEN) domctl.c:986:d0 memory_map:add: gfn=f1060 mfn=fe9bc nr_mfns=4 > (XEN) HVM3: pci dev 09:0 bar 10 size 00004000: f1064004 > (XEN) domctl.c:986:d0 memory_map:add: gfn=f1064 mfn=fe3f8 nr_mfns=4 > (XEN) HVM3: pci dev 07:0 bar 10 size 00001000: f1068000 > (XEN) domctl.c:986:d0 memory_map:add: gfn=f1068 mfn=fe3f7 nr_mfns=1 > (XEN) HVM3: pci dev 08:0 bar 10 size 00001000: f1069000 > (XEN) domctl.c:986:d0 memory_map:add: gfn=f1069 mfn=f0000 nr_mfns=1 > (XEN) HVM3: pci dev 03:0 bar 10 size 00000100: 0000c001 > (XEN) HVM3: pci dev 05:0 bar 20 size 00000100: 0000c101 > (XEN) HVM3: pci dev 04:0 bar 14 size 00000040: 0000c201 > (XEN) HVM3: pci dev 01:1 bar 20 size 00000010: 0000c241 > (XEN) HVM3: Multiprocessor initialisation: > (XEN) HVM3: - CPU0 ... 48-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... > done. > (XEN) HVM3: - CPU1 ... 48-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... > done. > (XEN) HVM3: - CPU2 ... 48-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... > done. > (XEN) HVM3: - CPU3 ... 48-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... > done. > (XEN) HVM3: - CPU4 ... 48-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... > done. > (XEN) HVM3: - CPU5 ... 48-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... > done. > (XEN) HVM3: Testing HVM environment: > (XEN) HVM3: - REP INSB across page boundaries ... passed > (XEN) HVM3: - GS base MSRs and SWAPGS ... passed > (XEN) HVM3: Passed 2 of 2 tests > (XEN) HVM3: Writing SMBIOS tables ... > __ __ _ _ ____ _ _ _ > \ \/ /___ _ __ | || | |___ \ _ _ _ __ ___| |_ __ _| |__ | | ___ > \ // _ \ '_ \ | || |_ __) |__| | | | '_ \/ __| __/ _` | '_ \| |/ _ \ > / \ __/ | | | |__ _| / __/|__| |_| | | | \__ \ || (_| | |_) | | __/ > /_/\_\___|_| |_| |_|(_)_____| \__,_|_| |_|___/\__\__,_|_.__/|_|\___| > > (XEN) Xen version 4.2-unstable (root@xxxxxxxxxx) (gcc version 4.4.5 (Debian > 4.4.5-8) ) Sun Feb 5 15:55:33 CET 2012 > (XEN) Latest ChangeSet: Thu May 05 17:40:34 2011 +0100 23300:4b0692880dfa > (XEN) Console output is synchronous. > (XEN) Bootloader: GRUB 1.98+20100804-14+squeeze1 > (XEN) Command line: placeholder dom0_mem=2G dom0_max_vcpus=6 loglvl=all > guest_loglvl=all sync_console com1=115200,8n1,0xac00 console=com1 > (XEN) Video information: > (XEN) VGA is text mode 80x25, font 8x16 > (XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds > (XEN) Disc information: > (XEN) Found 1 MBR signatures > (XEN) Found 1 EDD information structures > (XEN) Xen-e820 RAM map: > (XEN) 0000000000000000 - 000000000009ac00 (usable) > (XEN) 000000000009ac00 - 00000000000a0000 (reserved) > (XEN) 00000000000e4000 - 0000000000100000 (reserved) > (XEN) 0000000000100000 - 00000000cfe80000 (usable) > (XEN) 00000000cfe80000 - 00000000cfe98000 (ACPI data) > (XEN) 00000000cfe98000 - 00000000cfec0000 (ACPI NVS) > (XEN) 00000000cfec0000 - 00000000cff00000 (reserved) > (XEN) 00000000ffe00000 - 0000000100000000 (reserved) > (XEN) 0000000100000000 - 0000000230000000 (usable) > (XEN) ACPI: RSDP 000FBF20, 0024 (r2 ACPIAM) > (XEN) ACPI: XSDT CFE80100, 005C (r1 102811 XSDT1740 20111028 MSFT 97) > (XEN) ACPI: FACP CFE80290, 00F4 (r3 102811 FACP1740 20111028 MSFT 97) > (XEN) ACPI: DSDT CFE80470, E6E3 (r1 A1595 A1595000 0 INTL 20060113) > (XEN) ACPI: FACS CFE98000, 0040 > (XEN) ACPI: APIC CFE80390, 0098 (r1 102811 APIC1740 20111028 MSFT 97) > (XEN) ACPI: MCFG CFE80430, 003C (r1 102811 OEMMCFG 20111028 MSFT 97) > (XEN) ACPI: OEMB CFE98040, 0072 (r1 102811 OEMB1740 20111028 MSFT 97) > (XEN) ACPI: HPET CFE8F8C0, 0038 (r1 102811 OEMHPET 20111028 MSFT 97) > (XEN) ACPI: IVRS CFE8F900, 00E0 (r1 AMD RD890S 202031 AMD 0) > (XEN) ACPI: SSDT CFE8F9E0, 0E10 (r1 A M I POWERNOW 1 AMD 1) > (XEN) System RAM: 8190MB (8386664kB) > (XEN) No NUMA configuration found > (XEN) Faking a node at 0000000000000000-0000000230000000 > (XEN) Domain heap initialised > (XEN) found SMP MP-table at 000ff780 > (XEN) DMI present. > (XEN) Using APIC driver default > (XEN) ACPI: PM-Timer IO Port: 0x808 > (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[804,0], pm1x_evt[800,0] > (XEN) ACPI: wakeup_vec[cfe9800c], vec_size[20] > (XEN) ACPI: Local APIC address 0xfee00000 > (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > (XEN) Processor #0 0:10 APIC version 16 > (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) > (XEN) Processor #1 0:10 APIC version 16 > (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) > (XEN) Processor #2 0:10 APIC version 16 > (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) > (XEN) Processor #3 0:10 APIC version 16 > (XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled) > (XEN) Processor #4 0:10 APIC version 16 > (XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) > (XEN) Processor #5 0:10 APIC version 16 > (XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled) > (XEN) ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0]) > (XEN) IOAPIC[0]: apic_id 6, version 33, address 0xfec00000, GSI 0-23 > (XEN) ACPI: IOAPIC (id[0x07] address[0xfec20000] gsi_base[24]) > (XEN) IOAPIC[1]: apic_id 7, version 33, address 0xfec20000, GSI 24-55 > (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) > (XEN) ACPI: IRQ0 used by override. > (XEN) ACPI: IRQ2 used by override. > (XEN) ACPI: IRQ9 used by override. > (XEN) Enabling APIC mode: Flat. Using 2 I/O APICs > (XEN) ACPI: HPET id: 0x8300 base: 0xfed00000 > (XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 > (XEN) PCI: Not using MMCONFIG. > (XEN) Table is not found! > (XEN) Using ACPI (MADT) for SMP configuration information > (XEN) IRQ limits: 56 GSI, 1112 MSI/MSI-X > (XEN) Using scheduler: SMP Credit Scheduler (credit) > (XEN) Detected 3010.220 MHz processor. > (XEN) Initing memory sharing. > (XEN) AMD Fam10h machine check reporting enabled > (XEN) AMD-Vi: IOMMU 0 Enabled. > (XEN) I/O virtualisation enabled > (XEN) - Dom0 mode: Relaxed > (XEN) ENABLING IO-APIC IRQs > (XEN) -> Using new ACK method > (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1 > (XEN) Platform timer is 14.318MHz HPET > Ã(XEN) Allocated console ring of 64 KiB. > (XEN) HVM: ASIDs enabled. > (XEN) SVM: Supported advanced features: > (XEN) - Nested Page Tables (NPT) > (XEN) - Last Branch Record (LBR) Virtualisation > (XEN) - Next-RIP Saved on #VMEXIT > (XEN) - Pause-Intercept Filter > (XEN) HVM: SVM enabled > (XEN) HVM: Hardware Assisted Paging detected. > (XEN) Brought up 6 CPUs > (XEN) HPET's MSI mode hasn't been supported when Interrupt Remapping is > enabled. > (XEN) ACPI sleep modes: S3 > (XEN) MCA: Use hw thresholding to adjust polling frequency > (XEN) mcheck_poll: Machine check polling timer started. > (XEN) Xenoprofile: Failed to setup IBS LVT offset, IBSCTL = 0xffffffff > (XEN) *** LOADING DOMAIN 0 *** > (XEN) elf_parse_binary: phdr: paddr=0x1000000 memsz=0x77c000 > (XEN) elf_parse_binary: phdr: paddr=0x177c000 memsz=0x8da88 > (XEN) elf_parse_binary: phdr: paddr=0x180a000 memsz=0x8c8 > (XEN) elf_parse_binary: phdr: paddr=0x180b000 memsz=0x14a58 > (XEN) elf_parse_binary: phdr: paddr=0x1820000 memsz=0x212000 > (XEN) elf_parse_binary: memory: 0x1000000 -> 0x1a32000 > (XEN) elf_xen_parse_note: GUEST_OS = "linux" > (XEN) elf_xen_parse_note: GUEST_VERSION = "2.6" > (XEN) elf_xen_parse_note: XEN_VERSION = "xen-3.0" > (XEN) elf_xen_parse_note: VIRT_BASE = 0xffffffff80000000 > (XEN) elf_xen_parse_note: ENTRY = 0xffffffff81820200 > (XEN) elf_xen_parse_note: HYPERCALL_PAGE = 0xffffffff81009000 > (XEN) elf_xen_parse_note: FEATURES = > "!writable_page_tables|pae_pgdir_above_4gb" > (XEN) elf_xen_parse_note: PAE_MODE = "yes" > (XEN) elf_xen_parse_note: LOADER = "generic" > (XEN) elf_xen_parse_note: unknown xen elf note (0xd) > (XEN) elf_xen_parse_note: SUSPEND_CANCEL = 0x1 > (XEN) elf_xen_parse_note: HV_START_LOW = 0xffff800000000000 > (XEN) elf_xen_parse_note: PADDR_OFFSET = 0x0 > (XEN) elf_xen_addr_calc_check: addresses: > (XEN) virt_base = 0xffffffff80000000 > (XEN) elf_paddr_offset = 0x0 > (XEN) virt_offset = 0xffffffff80000000 > (XEN) virt_kstart = 0xffffffff81000000 > (XEN) virt_kend = 0xffffffff81a32000 > (XEN) virt_entry = 0xffffffff81820200 > (XEN) p2m_base = 0xffffffffffffffff > (XEN) Xen kernel: 64-bit, lsb, compat32 > (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x1a32000 > (XEN) PHYSICAL MEMORY ARRANGEMENT: > (XEN) Dom0 alloc.: 0000000224000000->0000000228000000 (506263 pages to be > allocated) > (XEN) Init. ramdisk: 000000022f997000->000000022ffff600 > (XEN) VIRTUAL MEMORY ARRANGEMENT: > (XEN) Loaded kernel: ffffffff81000000->ffffffff81a32000 > (XEN) Init. ramdisk: ffffffff81a32000->ffffffff8209a600 > (XEN) Phys-Mach map: ffffffff8209b000->ffffffff8249b000 > (XEN) Start info: ffffffff8249b000->ffffffff8249b4b4 > (XEN) Page tables: ffffffff8249c000->ffffffff824b3000 > (XEN) Boot stack: ffffffff824b3000->ffffffff824b4000 > (XEN) TOTAL: ffffffff80000000->ffffffff82800000 > (XEN) ENTRY ADDRESS: ffffffff81820200 > (XEN) Dom0 has maximum 6 VCPUs > (XEN) elf_load_binary: phdr 0 at 0xffffffff81000000 -> 0xffffffff8177c000 > (XEN) elf_load_binary: phdr 1 at 0xffffffff8177c000 -> 0xffffffff81809a88 > (XEN) elf_load_binary: phdr 2 at 0xffffffff8180a000 -> 0xffffffff8180a8c8 > (XEN) elf_load_binary: phdr 3 at 0xffffffff8180b000 -> 0xffffffff8181fa58 > (XEN) elf_load_binary: phdr 4 at 0xffffffff81820000 -> 0xffffffff818b3000 > (XEN) Scrubbing Free RAM: > .............................................................done. > (XEN) Std. Loglevel: All > (XEN) Guest Loglevel: All > (XEN) ********************************************** > (XEN) ******* WARNING: CONSOLE OUTPUT IS SYNCHRONOUS > (XEN) ******* This option is intended to aid debugging of Xen by ensuring > (XEN) ******* that all output is synchronously delivered on the serial line. > (XEN) ******* However it can introduce SIGNIFICANT latencies and affect > (XEN) ******* timekeeping. It is NOT recommended for production use! > (XEN) ********************************************** > (XEN) 3... 2... 1... > (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to > Xen) > (XEN) Freed 236kB init memory. > mapping kernel into physical memory > Xen: setup ISA identity maps > about to get started... > ERROR: Unable to locate IOAPIC for GSI 2 > ERROR: Unable to locate IOAPIC for GSI 9 > (XEN) traps.c:2405:d0 Domain attempted WRMSR 00000000c0010004 from > 0x0000e4a75df86514 to 0x0000000000000000. > (XEN) traps.c:2405:d0 Domain attempted WRMSR 00000000c0010000 from > 0x0000030e1b0effe9 to 0x0000000000430076. > ERROR: Unable to locate IOAPIC for GSI 9 > (XEN) PCI add device 00:00.0 > (XEN) PCI add device 00:00.2 > (XEN) PCI add device 00:02.0 > (XEN) PCI add device 00:04.0 > (XEN) PCI add device 00:05.0 > (XEN) PCI add device 00:06.0 > (XEN) PCI add device 00:07.0 > (XEN) PCI add device 00:0d.0 > (XEN) PCI add device 00:11.0 > (XEN) PCI add device 00:12.0 > (XEN) PCI add device 00:12.2 > (XEN) PCI add device 00:13.0 > (XEN) PCI add device 00:13.2 > (XEN) PCI add device 00:14.0 > (XEN) PCI add device 00:14.2 > (XEN) PCI add device 00:14.3 > (XEN) PCI add device 00:14.4 > (XEN) PCI add device 00:14.5 > (XEN) PCI add device 00:16.0 > (XEN) PCI add device 00:16.2 > (XEN) PCI add device 00:18.0 > (XEN) PCI add device 00:18.1 > (XEN) PCI add device 00:18.2 > (XEN) PCI add device 00:18.3 > (XEN) PCI add device 00:18.4 > (XEN) PCI add device 07:00.0 > (XEN) PCI add device 07:00.1 > (XEN) PCI add device 06:00.0 > (XEN) PCI add device 06:00.1 > (XEN) PCI add device 05:00.0 > (XEN) PCI add device 04:00.0 > (XEN) PCI add device 03:00.0 > (XEN) PCI add device 02:00.0 > (XEN) PCI add device 02:00.1 > registering netback > IT87 WDT: Unknown Chip found, Chip 8721 Revision 0001 > [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found. > [Firmware Bug]: powernow-k8: Try again with latest BIOS. > Loading, please wait... > INIT: version 2.88 booting > Using makefile-style concurrent boot in runlevel S. > Starting the hotplug events dispatcher: udevd. > Synthesizing the initial hotplug events...done. > Waiting for /dev to be fully populated...udevd-work[1429]: kernel-provided > name 'blktap-control' and NAME= 'xen/blktap-2/control' disagree, please use > SYMLINK+= or change the kernel to provide the proper name > > done. > Setting preliminary keymap...done. > Activating swap...done. > Checking root file system...fsck from util-linux-ng 2.17.2 > HOWTO_ROOT: clean, 95056/1419840 files, 731207/5679104 blocks (check in 3 > mounts) > done. > Loading kernel modules...done. > Cleaning up ifupdown.... > Setting up networking.... > Setting up LVM Volume Groups Reading all physical volumes. This may take a > while... > Found volume group "lemrouch" using metadata type lvm2 > 4 logical volume(s) in volume group "lemrouch" now active > . > Activating lvm and md swap...done. > Checking file systems...fsck from util-linux-ng 2.17.2 > done. > Mounting local filesystems...done. > Activating swapfile swap...done. > Cleaning up temporary files.... > Setting kernel variables ...done. > Configuring network interfaces...done. > Cleaning up temporary files.... > Setting console screen modes. > Rcannot (un)set powersave mode > Skipping font and keymap setup (handled by console-setup). > Setting up console font and keymap...done. > INIT: Entering runlevel: 2 > Using makefile-style concurrent boot in runlevel 2. > acpid: starting up with proc fs > > acpid: 1 rule loaded > > acpid: waiting for events: event logging is off > > Starting ACPI services.... > Starting system message bus: dbus. > Starting periodic command scheduler: cron. > Starting OpenBSD Secure Shell server: sshd. > Starting xenstored...XENBUS: Unable to read cpu state > XENBUS: Unable to read cpu state > XENBUS: Unable to read cpu state > XENBUS: Unable to read cpu state > XENBUS: Unable to read cpu state > XENBUS: Unable to read cpu state > > Setting domain 0 name... > Starting xenconsoled... > BLKTAPCTRL[2156]: blktapctrl.c:790: blktapctrl: v1.0.0 > > BLKTAPCTRL[2156]: blktapctrl.c:792: Found driver: [raw image (aio)] > > BLKTAPCTRL[2156]: blktapctrl.c:792: Found driver: [raw image (sync)] > > BLKTAPCTRL[2156]: blktapctrl.c:792: Found driver: [vmware image (vmdk)] > > BLKTAPCTRL[2156]: blktapctrl.c:792: Found driver: [ramdisk image (ram)] > > BLKTAPCTRL[2156]: blktapctrl.c:792: Found driver: [qcow disk (qcow)] > > BLKTAPCTRL[2156]: blktapctrl.c:792: Found driver: [qcow2 disk (qcow2)] > > BLKTAPCTRL[2156]: blktapctrl_linux.c:86: blktap0 open failed > > BLKTAPCTRL[2156]: blktapctrl.c:859: couldn't open blktap interface > > BLKTAPCTRL[2156]: blktapctrl.c:922: Unable to start blktapctrl > > (XEN) PCI remove device 00:12.2 > (XEN) PCI add device 00:12.2 > /usr/local/bin/xen_start.sh: line 15: > /sys/bus/pci/devices/0000:07:00.0/driver/unbind: No such file or directory > Using config file "/etc/xen/windows". > (XEN) domctl.c:1042:d0 ioport_map:add f_gport=3b0 f_mport=3b0 np=c > (XEN) domctl.c:986:d0 memory_map:add: gfn=a0 mfn=a0 nr_mfns=20 > (XEN) domctl.c:1042:d0 ioport_map:add f_gport=3c0 f_mport=3c0 np=3 > (XEN) domctl.c:1042:d0 ioport_map:add f_gport=3c4 f_mport=3c4 np=1c > (XEN) HVM1: HVM Loader > (XEN) HVM1: Detected Xen v4.2-unstable > (XEN) HVM1: Xenbus rings @0xfeffc000, event channel 7 > Started domain windows (id=1)(XEN) HVM1: System requested ROMBIOS > > (XEN) HVM1: CPU speed is 3010 MHz > (XEN) irq.c:258: Dom1 PCI link 0 changed 0 -> 5 > (XEN) HVM1: PCI-ISA link 0 routed to IRQ5 > (XEN) irq.c:258: Dom1 PCI link 1 changed 0 -> 10 > (XEN) HVM1: PCI-ISA link 1 routed to IRQ10 > (XEN) irq.c:258: Dom1 PCI link 2 changed 0 -> 11 > (XEN) HVM1: PCI-ISA link 2 routed to IRQ11 > (XEN) irq.c:258: Dom1 PCI link 3 changed 0 -> 5 > (XEN) HVM1: PCI-ISA link 3 routed to IRQ5 > (XEN) HVM1: pci dev 01:3 INTA->IRQ10 > (XEN) HVM1: pci dev 03:0 INTA->IRQ5 > (XEN) HVM1: pci dev 04:0 INTA->IRQ5 > (XEN) HVM1: pci dev 05:0 INTA->IRQ10 > (XEN) HVM1: pci dev 06:0 INTB->IRQ5 > (XEN) HVM1: pci dev 07:0 INTA->IRQ5 > (XEN) HVM1: pci dev 08:0 INTB->IRQ10 > (XEN) HVM1: pci dev 09:0 INTA->IRQ10 > (XEN) HVM1: pci dev 05:0 bar 10 size 10000000: e000000c > (XEN) domctl.c:986:d0 memory_map:add: gfn=e0000 mfn=d0000 nr_mfns=10000 > (XEN) HVM1: pci dev 03:0 bar 14 size 01000000: f0000008 > (XEN) HVM1: pci dev 04:0 bar 10 size 00020000: f1000000 > (XEN) domctl.c:986:d0 memory_map:add: gfn=f1020 mfn=fe9e0 nr_mfns=20 > (XEN) HVM1: pci dev 05:0 bar 18 size 00020000: f1020004 > (XEN) HVM1: pci dev 05:0 bar 30 size 00020000: f1040000 > (XEN) HVM1: pci dev 06:0 bar 10 size 00004000: f1060004 > (XEN) domctl.c:986:d0 memory_map:add: gfn=f1060 mfn=fe9bc nr_mfns=4 > (XEN) HVM1: pci dev 09:0 bar 10 size 00004000: f1064004 > (XEN) domctl.c:986:d0 memory_map:add: gfn=f1064 mfn=fe3f8 nr_mfns=4 > (XEN) HVM1: pci dev 07:0 bar 10 size 00001000: f1068000 > (XEN) domctl.c:986:d0 memory_map:add: gfn=f1068 mfn=fe3f7 nr_mfns=1 > (XEN) HVM1: pci dev 08:0 bar 10 size 00001000: f1069000 > (XEN) domctl.c:986:d0 memory_map:add: gfn=f1069 mfn=f0000 nr_mfns=1 > (XEN) HVM1: pci dev 03:0 bar 10 size 00000100: 0000c001 > (XEN) HVM1: pci dev 05:0 bar 20 size 00000100: 0000c101 > (XEN) HVM1: pci dev 04:0 bar 14 size 00000040: 0000c201 > (XEN) HVM1: pci dev 01:1 bar 20 size 00000010: 0000c241 > (XEN) HVM1: Multiprocessor initialisation: > (XEN) HVM1: - CPU0 ... 48-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... > done. > (XEN) HVM1: - CPU1 ... 48-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... > done. > (XEN) HVM1: - CPU2 ... 48-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... > done. > (XEN) HVM1: - CPU3 ... 48-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... > done. > (XEN) HVM1: - CPU4 ... 48-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... > done. > (XEN) HVM1: - CPU5 ... 48-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... > done. > (XEN) HVM1: Testing HVM environment: > (XEN) HVM1: - REP INSB across page boundaries ... passed > (XEN) HVM1: - GS base MSRs and SWAPGS ... passed > (XEN) HVM1: Passed 2 of 2 tests > (XEN) HVM1: Writing SMBIOS tables ... > (XEN) HVM1: Loading ROMBIOS ... > (XEN) HVM1: 9660 bytes of ROMBIOS high-memory extensions: > (XEN) HVM1: Relocating to 0xfc000000-0xfc0025bc ... done > (XEN) HVM1: Creating MP tables ... > (XEN) HVM1: Loading VGABIOS of passthroughed gfx ... > (XEN) HVM1: Loading PCI Option ROM ... > (XEN) HVM1: - Manufacturer: http://etherboot.org > (XEN) HVM1: - Product name: gPXE > (XEN) HVM1: Loading ACPI ... > (XEN) HVM1: - Lo data: 000ea020-000ea04f > (XEN) HVM1: - Hi data: fc002800-fc01291f > (XEN) HVM1: vm86 TSS at fc012c00 > (XEN) HVM1: BIOS map: > (XEN) HVM1: c0000-cffff: VGA BIOS > (XEN) HVM1: d0000-e1fff: Etherboot ROM > (XEN) HVM1: eb000-eb20f: SMBIOS tables > (XEN) HVM1: f0000-fffff: Main BIOS > (XEN) HVM1: E820 table: > (XEN) HVM1: [00]: 00000000:00000000 - 00000000:0009e000: RAM > (XEN) HVM1: [01]: 00000000:0009e000 - 00000000:0009fc00: RESERVED > (XEN) HVM1: [02]: 00000000:0009fc00 - 00000000:000a0000: RESERVED > (XEN) HVM1: HOLE: 00000000:000a0000 - 00000000:000e0000 > (XEN) HVM1: [03]: 00000000:000e0000 - 00000000:00100000: RESERVED > (XEN) HVM1: [04]: 00000000:00100000 - 00000000:e0000000: RAM > (XEN) HVM1: HOLE: 00000000:e0000000 - 00000000:fc000000 > (XEN) HVM1: [05]: 00000000:fc000000 - 00000001:00000000: RESERVED > (XEN) HVM1: [06]: 00000001:00000000 - 00000001:20000000: RAM > (XEN) HVM1: Invoking ROMBIOS ... > (XEN) HVM1: $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $ > (XEN) HVM1: Bochs BIOS - build: 06/23/99 > (XEN) HVM1: $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $ > (XEN) HVM1: Options: apmbios pcibios eltorito PMM > (XEN) HVM1: > (XEN) HVM1: ata0-0: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 > (XEN) HVM1: ata0 master: QEMU HARDDISK ATA-7 Hard-Disk (20480 MBytes) > (XEN) HVM1: ata0-1: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 > (XEN) HVM1: ata0 slave: QEMU HARDDISK ATA-7 Hard-Disk (51200 MBytes) > (XEN) HVM1: > (XEN) HVM1: > (XEN) HVM1: > (XEN) HVM1: Press F12 for boot menu. > (XEN) HVM1: > (XEN) HVM1: Booting from Hard Disk... > (XEN) HVM1: Booting from 0000:7c00 > (XEN) irq.c:258: Dom1 PCI link 0 changed 5 -> 0 > (XEN) irq.c:258: Dom1 PCI link 1 changed 10 -> 0 > (XEN) irq.c:258: Dom1 PCI link 2 changed 11 -> 0 > (XEN) irq.c:258: Dom1 PCI link 3 changed 5 -> 0 > (XEN) domctl.c:996:d0 memory_map:remove: gfn=e0000 mfn=d0000 nr_mfns=10000 > (XEN) domctl.c:996:d0 memory_map:remove: gfn=f1020 mfn=fe9e0 nr_mfns=20 > (XEN) domctl.c:986:d0 memory_map:add: gfn=e0000 mfn=d0000 nr_mfns=10000 > (XEN) domctl.c:986:d0 memory_map:add: gfn=f1020 mfn=fe9e0 nr_mfns=20 > (XEN) domctl.c:996:d0 memory_map:remove: gfn=f1060 mfn=fe9bc nr_mfns=4 > (XEN) domctl.c:986:d0 memory_map:add: gfn=f1060 mfn=fe9bc nr_mfns=4 > (XEN) domctl.c:996:d0 memory_map:remove: gfn=f1068 mfn=fe3f7 nr_mfns=1 > (XEN) domctl.c:986:d0 memory_map:add: gfn=f1068 mfn=fe3f7 nr_mfns=1 > (XEN) domctl.c:996:d0 memory_map:remove: gfn=f1069 mfn=f0000 nr_mfns=1 > (XEN) domctl.c:986:d0 memory_map:add: gfn=f1069 mfn=f0000 nr_mfns=1 > (XEN) domctl.c:996:d0 memory_map:remove: gfn=f1064 mfn=fe3f8 nr_mfns=4 > (XEN) domctl.c:986:d0 memory_map:add: gfn=f1064 mfn=fe3f8 nr_mfns=4 > (XEN) grant_table.c:1156:d1 Expanding dom (1) grant table from (4) to (32) > frames. > (XEN) irq.c:324: Dom1 callback via changed to GSI 28 > (XEN) domctl.c:996:d0 memory_map:remove: gfn=e0000 mfn=d0000 nr_mfns=10000 > (XEN) domctl.c:996:d0 memory_map:remove: gfn=f1020 mfn=fe9e0 nr_mfns=20 > (XEN) domctl.c:986:d0 memory_map:add: gfn=e0000 mfn=d0000 nr_mfns=10000 > (XEN) domctl.c:986:d0 memory_map:add: gfn=f1020 mfn=fe9e0 nr_mfns=20 > (XEN) domctl.c:996:d0 memory_map:remove: gfn=f1068 mfn=fe3f7 nr_mfns=1 > (XEN) domctl.c:986:d0 memory_map:add: gfn=f1068 mfn=fe3f7 nr_mfns=1 > (XEN) domctl.c:996:d0 memory_map:remove: gfn=f1060 mfn=fe9bc nr_mfns=4 > (XEN) domctl.c:986:d0 memory_map:add: gfn=f1060 mfn=fe9bc nr_mfns=4 > (XEN) domctl.c:996:d0 memory_map:remove: gfn=f1069 mfn=f0000 nr_mfns=1 > (XEN) domctl.c:986:d0 memory_map:add: gfn=f1069 mfn=f0000 nr_mfns=1 > (XEN) domctl.c:996:d0 memory_map:remove: gfn=f1064 mfn=fe3f8 nr_mfns=4 > (XEN) domctl.c:986:d0 memory_map:add: gfn=f1064 mfn=fe3f8 nr_mfns=4 > __ __ _ _ ____ _ _ _ > \ \/ /___ _ __ | || | |___ \ _ _ _ __ ___| |_ __ _| |__ | | ___ > \ // _ \ '_ \ | || |_ __) |__| | | | '_ \/ __| __/ _` | '_ \| |/ _ \ > / \ __/ | | | |__ _| / __/|__| |_| | | | \__ \ || (_| | |_) | | __/ > /_/\_\___|_| |_| |_|(_)_____| \__,_|_| |_|___/\__\__,_|_.__/|_|\___| > > (XEN) Xen version 4.2-unstable (root@(none)) (gcc version 4.4.5 (Debian > 4.4.5-8) ) Sat May 5 15:48:48 CEST 2012 > (XEN) Latest ChangeSet: Fri May 04 11:18:48 2012 +0100 25259:0f53540494f7 > (XEN) Console output is synchronous. > (XEN) Bootloader: GRUB 1.98+20100804-14+squeeze1 > (XEN) Command line: placeholder dom0_mem=2G dom0_max_vcpus=6 loglvl=all > guest_loglvl=all sync_console com1=115200,8n1,0xac00 console=com1 > (XEN) Video information: > (XEN) VGA is text mode 80x25, font 8x16 > (XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds > (XEN) Disc information: > (XEN) Found 1 MBR signatures > (XEN) Found 1 EDD information structures > (XEN) Xen-e820 RAM map: > (XEN) 0000000000000000 - 000000000009ac00 (usable) > (XEN) 000000000009ac00 - 00000000000a0000 (reserved) > (XEN) 00000000000e4000 - 0000000000100000 (reserved) > (XEN) 0000000000100000 - 00000000cfe80000 (usable) > (XEN) 00000000cfe80000 - 00000000cfe98000 (ACPI data) > (XEN) 00000000cfe98000 - 00000000cfec0000 (ACPI NVS) > (XEN) 00000000cfec0000 - 00000000cff00000 (reserved) > (XEN) 00000000ffe00000 - 0000000100000000 (reserved) > (XEN) 0000000100000000 - 0000000230000000 (usable) > (XEN) ACPI: RSDP 000FBF20, 0024 (r2 ACPIAM) > (XEN) ACPI: XSDT CFE80100, 005C (r1 102811 XSDT1740 20111028 MSFT 97) > (XEN) ACPI: FACP CFE80290, 00F4 (r3 102811 FACP1740 20111028 MSFT 97) > (XEN) ACPI: DSDT CFE80470, E6E3 (r1 A1595 A1595000 0 INTL 20060113) > (XEN) ACPI: FACS CFE98000, 0040 > (XEN) ACPI: APIC CFE80390, 0098 (r1 102811 APIC1740 20111028 MSFT 97) > (XEN) ACPI: MCFG CFE80430, 003C (r1 102811 OEMMCFG 20111028 MSFT 97) > (XEN) ACPI: OEMB CFE98040, 0072 (r1 102811 OEMB1740 20111028 MSFT 97) > (XEN) ACPI: HPET CFE8F8C0, 0038 (r1 102811 OEMHPET 20111028 MSFT 97) > (XEN) ACPI: IVRS CFE8F900, 00E0 (r1 AMD RD890S 202031 AMD 0) > (XEN) ACPI: SSDT CFE8F9E0, 0E10 (r1 A M I POWERNOW 1 AMD 1) > (XEN) System RAM: 8190MB (8386664kB) > (XEN) No NUMA configuration found > (XEN) Faking a node at 0000000000000000-0000000230000000 > (XEN) Domain heap initialised > (XEN) found SMP MP-table at 000ff780 > (XEN) DMI present. > (XEN) Using APIC driver default > (XEN) ACPI: PM-Timer IO Port: 0x808 > (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[804,0], pm1x_evt[800,0] > (XEN) ACPI: wakeup_vec[cfe9800c], vec_size[20] > (XEN) ACPI: Local APIC address 0xfee00000 > (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > (XEN) Processor #0 0:10 APIC version 16 > (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) > (XEN) Processor #1 0:10 APIC version 16 > (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) > (XEN) Processor #2 0:10 APIC version 16 > (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) > (XEN) Processor #3 0:10 APIC version 16 > (XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled) > (XEN) Processor #4 0:10 APIC version 16 > (XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) > (XEN) Processor #5 0:10 APIC version 16 > (XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled) > (XEN) ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0]) > (XEN) IOAPIC[0]: apic_id 6, version 33, address 0xfec00000, GSI 0-23 > (XEN) ACPI: IOAPIC (id[0x07] address[0xfec20000] gsi_base[24]) > (XEN) IOAPIC[1]: apic_id 7, version 33, address 0xfec20000, GSI 24-55 > (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) > (XEN) ACPI: IRQ0 used by override. > (XEN) ACPI: IRQ2 used by override. > (XEN) ACPI: IRQ9 used by override. > (XEN) Enabling APIC mode: Flat. Using 2 I/O APICs > (XEN) ACPI: HPET id: 0x8300 base: 0xfed00000 > (XEN) Table is not found! > (XEN) Using ACPI (MADT) for SMP configuration information > (XEN) SMP: Allowing 8 CPUs (2 hotplug CPUs) > (XEN) IRQ limits: 56 GSI, 1112 MSI/MSI-X > (XEN) Using scheduler: SMP Credit Scheduler (credit) > (XEN) Detected 3010.225 MHz processor. > (XEN) Initing memory sharing. > (XEN) AMD Fam10h machine check reporting enabled > (XEN) PCI: MCFG configuration 0: base e0000000 segment 0000 buses 00 - ff > (XEN) PCI: Not using MCFG for segment 0000 bus 00-ff > (XEN) AMD-Vi: IOMMU 0 Enabled. > (XEN) AMD-Vi: Enabling global vector map > (XEN) I/O virtualisation enabled > (XEN) - Dom0 mode: Relaxed > (XEN) ENABLING IO-APIC IRQs > (XEN) -> Using new ACK method > (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1 > (XEN) Platform timer is 14.318MHz HPET > (XEN) Allocated console ring of 64 KiB. > (XEN) HVM: ASIDs enabled. > (XEN) SVM: Supported advanced features: > (XEN) - Nested Page Tables (NPT) > (XEN) - Last Branch Record (LBR) Virtualisation > (XEN) - Next-RIP Saved on #VMEXIT > (XEN) - Pause-Intercept Filter > (XEN) HVM: SVM enabled > (XEN) HVM: Hardware Assisted Paging (HAP) detected > (XEN) HVM: HAP page sizes: 4kB, 2MB, 1GB > (XEN) microcode: collect_cpu_info: patch_id=0x10000bf > (XEN) microcode: collect_cpu_info: patch_id=0x10000bf > (XEN) microcode: collect_cpu_info: patch_id=0x10000bf > (XEN) microcode: collect_cpu_info: patch_id=0x10000bf > (XEN) Brought up 6 CPUs > (XEN) microcode: collect_cpu_info: patch_id=0x10000bf > (XEN) HPET's MSI mode hasn't been supported when Interrupt Remapping is > enabled. > (XEN) ACPI sleep modes: S3 > (XEN) MCA: Use hw thresholding to adjust polling frequency > (XEN) mcheck_poll: Machine check polling timer started. > (XEN) Xenoprofile: Failed to setup IBS LVT offset, IBSCTL = 0xffffffff > (XEN) *** LOADING DOMAIN 0 *** > (XEN) elf_parse_binary: phdr: paddr=0x1000000 memsz=0x5b2000 > (XEN) elf_parse_binary: phdr: paddr=0x15b2000 memsz=0x660e0 > (XEN) elf_parse_binary: phdr: paddr=0x1619000 memsz=0x12500 > (XEN) elf_parse_binary: phdr: paddr=0x162c000 memsz=0x21b000 > (XEN) elf_parse_binary: memory: 0x1000000 -> 0x1847000 > (XEN) elf_xen_parse_note: GUEST_OS = "linux" > (XEN) elf_xen_parse_note: GUEST_VERSION = "2.6" > (XEN) elf_xen_parse_note: XEN_VERSION = "xen-3.0" > (XEN) elf_xen_parse_note: VIRT_BASE = 0xffffffff80000000 > (XEN) elf_xen_parse_note: ENTRY = 0xffffffff8162c200 > (XEN) elf_xen_parse_note: HYPERCALL_PAGE = 0xffffffff81001000 > (XEN) elf_xen_parse_note: FEATURES = > "!writable_page_tables|pae_pgdir_above_4gb" > (XEN) elf_xen_parse_note: PAE_MODE = "yes" > (XEN) elf_xen_parse_note: LOADER = "generic" > (XEN) elf_xen_parse_note: unknown xen elf note (0xd) > (XEN) elf_xen_parse_note: SUSPEND_CANCEL = 0x1 > (XEN) elf_xen_parse_note: HV_START_LOW = 0xffff800000000000 > (XEN) elf_xen_parse_note: PADDR_OFFSET = 0x0 > (XEN) elf_xen_addr_calc_check: addresses: > (XEN) virt_base = 0xffffffff80000000 > (XEN) elf_paddr_offset = 0x0 > (XEN) virt_offset = 0xffffffff80000000 > (XEN) virt_kstart = 0xffffffff81000000 > (XEN) virt_kend = 0xffffffff81847000 > (XEN) virt_entry = 0xffffffff8162c200 > (XEN) p2m_base = 0xffffffffffffffff > (XEN) Xen kernel: 64-bit, lsb, compat32 > (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x1847000 > (XEN) PHYSICAL MEMORY ARRANGEMENT: > (XEN) Dom0 alloc.: 0000000226000000->0000000228000000 (514500 pages to be > allocated) > (XEN) Init. ramdisk: 000000022f9c4000->000000022ffff200 > (XEN) VIRTUAL MEMORY ARRANGEMENT: > (XEN) Loaded kernel: ffffffff81000000->ffffffff81847000 > (XEN) Init. ramdisk: ffffffff81847000->ffffffff81e82200 > (XEN) Phys-Mach map: ffffffff81e83000->ffffffff82283000 > (XEN) Start info: ffffffff82283000->ffffffff822834b4 > (XEN) Page tables: ffffffff82284000->ffffffff82299000 > (XEN) Boot stack: ffffffff82299000->ffffffff8229a000 > (XEN) TOTAL: ffffffff80000000->ffffffff82400000 > (XEN) ENTRY ADDRESS: ffffffff8162c200 > (XEN) Dom0 has maximum 6 VCPUs > (XEN) elf_load_binary: phdr 0 at 0xffffffff81000000 -> 0xffffffff815b2000 > (XEN) elf_load_binary: phdr 1 at 0xffffffff815b2000 -> 0xffffffff816180e0 > (XEN) elf_load_binary: phdr 2 at 0xffffffff81619000 -> 0xffffffff8162b500 > (XEN) elf_load_binary: phdr 3 at 0xffffffff8162c000 -> 0xffffffff816b2000 > (XEN) Scrubbing Free RAM: > .............................................................done. > (XEN) Initial low memory virq threshold set at 0x4000 pages. > (XEN) Std. Loglevel: All > (XEN) Guest Loglevel: All > (XEN) ********************************************** > (XEN) ******* WARNING: CONSOLE OUTPUT IS SYNCHRONOUS > (XEN) ******* This option is intended to aid debugging of Xen by ensuring > (XEN) ******* that all output is synchronously delivered on the serial line. > (XEN) ******* However it can introduce SIGNIFICANT latencies and affect > (XEN) ******* timekeeping. It is NOT recommended for production use! > (XEN) ********************************************** > (XEN) 3... 2... 1... > (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to > Xen) > (XEN) Freed 256kB init memory. > mapping kernel into physical memory > Xen: setup ISA identity maps > about to get started... > Initializing cgroup subsys cpuset > Initializing cgroup subsys cpu > Linux version 3.2.0-rc2-11202-gd3507af-dirty (root@xen) (gcc version 4.4.5 > (Debian 4.4.5-8) ) #6 SMP PREEMPT Sat May 5 20:13:29 CEST 2012 > Command line: placeholder root=/dev/mapper/lemrouch-xen ro mem=2G panic=15 > xen-pciback.hide=(00:14.2) console=hvc0 earlyprintk=xen > Freeing 9a-100 pfn range: 102 pages freed > Released 102 pages of unused memory > Set 197094 page(s) to 1-1 mapping > BIOS-provided physical RAM map: > Xen: 0000000000000000 - 000000000009a000 (usable) > Xen: 000000000009ac00 - 0000000000100000 (reserved) > Xen: 0000000000100000 - 00000000cfe80000 (usable) > Xen: 00000000cfe80000 - 00000000cfe98000 (ACPI data) > Xen: 00000000cfe98000 - 00000000cfec0000 (ACPI NVS) > Xen: 00000000cfec0000 - 00000000cff00000 (reserved) > Xen: 00000000fec00000 - 00000000fec01000 (reserved) > Xen: 00000000fec20000 - 00000000fec21000 (reserved) > Xen: 00000000fee00000 - 00000000fee01000 (reserved) > Xen: 00000000ffe00000 - 0000000100000000 (reserved) > Xen: 0000000100000000 - 0000000230000000 (usable) > bootconsole [xenboot0] enabled > NX (Execute Disable) protection: active > user-defined physical RAM map: > user: 0000000000000000 - 000000000009a000 (usable) > user: 000000000009ac00 - 0000000000100000 (reserved) > user: 0000000000100000 - 0000000080000000 (usable) > user: 00000000cfe80000 - 00000000cfe98000 (ACPI data) > user: 00000000cfe98000 - 00000000cfec0000 (ACPI NVS) > user: 00000000cfec0000 - 00000000cff00000 (reserved) > user: 00000000fec00000 - 00000000fec01000 (reserved) > user: 00000000fec20000 - 00000000fec21000 (reserved) > user: 00000000fee00000 - 00000000fee01000 (reserved) > user: 00000000ffe00000 - 0000000100000000 (reserved) > DMI present. > No AGP bridge found > last_pfn = 0x80000 max_arch_pfn = 0x400000000 > found SMP MP-table at [ffff8800000ff780] ff780 > init_memory_mapping: 0000000000000000-0000000080000000 > RAMDISK: 01847000 - 01e83000 > ACPI: RSDP 00000000000fbf20 00024 (v02 ACPIAM) > ACPI: XSDT 00000000cfe80100 0005C (v01 102811 XSDT1740 20111028 MSFT 00000097) > ACPI: FACP 00000000cfe80290 000F4 (v03 102811 FACP1740 20111028 MSFT 00000097) > ACPI: DSDT 00000000cfe80470 0E6E3 (v01 A1595 A1595000 00000000 INTL 20060113) > ACPI: FACS 00000000cfe98000 00040 > ACPI: APIC 00000000cfe80390 00098 (v01 102811 APIC1740 20111028 MSFT 00000097) > ACPI: MCFG 00000000cfe80430 0003C (v01 102811 OEMMCFG 20111028 MSFT 00000097) > ACPI: OEMB 00000000cfe98040 00072 (v01 102811 OEMB1740 20111028 MSFT 00000097) > ACPI: HPET 00000000cfe8f8c0 00038 (v01 102811 OEMHPET 20111028 MSFT 00000097) > ACPI: IVRS 00000000cfe8f900 000E0 (v01 AMD RD890S 00202031 AMD 00000000) > ACPI: SSDT 00000000cfe8f9e0 00E10 (v01 A M I POWERNOW 00000001 AMD 00000001) > No NUMA configuration found > Faking a node at 0000000000000000-0000000080000000 > Initmem setup node 0 0000000000000000-0000000080000000 > NODE_DATA [000000007fffb000 - 000000007fffffff] > Zone PFN ranges: > DMA 0x00000010 -> 0x00001000 > DMA32 0x00001000 -> 0x00100000 > Normal empty > Movable zone start PFN for each node > early_node_map[2] active PFN ranges > 0: 0x00000010 -> 0x0000009a > 0: 0x00000100 -> 0x00080000 > ACPI: PM-Timer IO Port: 0x808 > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > BIOS bug: APIC version is 0 for CPU 0/0x0, fixing up to 0x10 > ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) > ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) > ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) > ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled) > ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) > ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled) > ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled) > ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0]) > IOAPIC[0]: apic_id 6, version 255, address 0xfec00000, GSI 0-255 > ACPI: IOAPIC (id[0x07] address[0xfec20000] gsi_base[24]) > IOAPIC[1]: apic_id 7, version 255, address 0xfec20000, GSI 24-279 > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) > Using ACPI (MADT) for SMP configuration information > ACPI: HPET id: 0x8300 base: 0xfed00000 > 8 Processors exceeds NR_CPUS limit of 6 > SMP: Allowing 6 CPUs, 0 hotplug CPUs > Allocating PCI resources starting at 80000000 (gap: 80000000:4fe80000) > Booting paravirtualized kernel on Xen > Xen version: 4.2-unstable (preserve-AD) > setup_percpu: NR_CPUS:6 nr_cpumask_bits:6 nr_cpu_ids:6 nr_node_ids:1 > PERCPU: Embedded 26 pages/cpu @ffff88007ff4b000 s75008 r8192 d23296 u106496 > Built 1 zonelists in Node order, mobility grouping on. Total pages: 514973 > Policy zone: DMA32 > Kernel command line: placeholder root=/dev/mapper/lemrouch-xen ro mem=2G > panic=15 xen-pciback.hide=(00:14.2) console=hvc0 earlyprintk=xen > PID hash table entries: 4096 (order: 3, 32768 bytes) > Placing 64MB software IO TLB between ffff880079600000 - ffff88007d600000 > software IO TLB at phys 0x79600000 - 0x7d600000 > Memory: 1975220k/2097152k available (4470k kernel code, 472k absent, 121460k > reserved, 1768k data, 596k init) > SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 > Preemptible hierarchical RCU implementation. > Verbose stalled-CPUs detection is disabled. > NR_IRQS:4352 nr_irqs:1536 16 > xen: sci override: global_irq=9 trigger=0 polarity=1 > xen: acpi sci 9 > xen_map_pirq_gsi: returning irq 9 for gsi 9 > Console: colour VGA+ 80x25 > console [hvc0] enabled, bootconsole disabled > console [hvc0] enabled, bootconsole disabled > installing Xen timer for CPU 0 > Detected 3010.224 MHz processor. > Calibrating delay loop (skipped), value calculated using timer frequency.. > 6020.44 BogoMIPS (lpj=3010224) > pid_max: default: 32768 minimum: 301 > Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) > Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) > Mount-cache hash table entries: 256 > Initializing cgroup subsys devices > Initializing cgroup subsys freezer > Initializing cgroup subsys blkio > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 0 > ACPI: Core revision 20110623 > cpu 0 spinlock event irq 297 > Performance Events: (XEN) traps.c:2561:d0 Domain attempted WRMSR > 00000000c0010004 from 0x0000e4a75df86514 to 0x000000000000abcd. > Broken PMU hardware detected, using software events only. > MCE: In-kernel MCE decoding enabled. > installing Xen timer for CPU 1 > cpu 1 spinlock event irq 303 > installing Xen timer for CPU 2 > cpu 2 spinlock event irq 309 > installing Xen timer for CPU 3 > cpu 3 spinlock event irq 315 > installing Xen timer for CPU 4 > cpu 4 spinlock event irq 321 > installing Xen timer for CPU 5 > cpu 5 spinlock event irq 327 > Brought up 6 CPUs > devtmpfs: initialized > Grant table initialized > NET: Registered protocol family 16 > TOM: 00000000d0000000 aka 3328M > TOM2: 0000000230000000 aka 8960M > Extended Config Space enabled on 1 nodes > ACPI: bus type pci registered > PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] > (base 0xe0000000) > PCI: not using MMCONFIG > PCI: Using configuration type 1 for base access > PCI: Using configuration type 1 for extended access > bio: create slab <bio-0> at 0 > ACPI: Added _OSI(Module Device) > ACPI: Added _OSI(Processor Device) > ACPI: Added _OSI(3.0 _SCP Extensions) > ACPI: Added _OSI(Processor Aggregator Device) > ACPI: Executed 3 blocks of module-level executable AML code > ACPI: Interpreter enabled > ACPI: (supports S0 S5) > ACPI: Using IOAPIC for interrupt routing > PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] > (base 0xe0000000) > PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard > resources > ACPI: EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62 > HEST: Table not found. > PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and > report a bug > ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) > pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] > pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] > pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] > pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] > pci_root PNP0A03:00: host bridge window [mem 0xcff00000-0xdfffffff] > pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff] > pci 0000:00:02.0: PCI bridge to [bus 07-07] > pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it > with 'pcie_aspm=force' > pci 0000:00:04.0: PCI bridge to [bus 06-06] > pci 0000:00:05.0: PCI bridge to [bus 05-05] > pci 0000:00:06.0: PCI bridge to [bus 04-04] > pci 0000:00:07.0: PCI bridge to [bus 03-03] > pci 0000:00:0d.0: PCI bridge to [bus 02-02] > pci 0000:00:14.4: PCI bridge to [bus 01-01] (subtractive decode) > pci0000:00: Requesting ACPI _OSC control (0x1d) > pci0000:00: ACPI _OSC control (0x1c) granted > (XEN) PCI add device 0000:00:00.0 > (XEN) PCI add device 0000:00:00.2 > (XEN) PCI add device 0000:00:02.0 > (XEN) PCI add device 0000:00:04.0 > (XEN) PCI add device 0000:00:05.0 > (XEN) PCI add device 0000:00:06.0 > (XEN) PCI add device 0000:00:07.0 > (XEN) PCI add device 0000:00:0d.0 > (XEN) PCI add device 0000:00:11.0 > (XEN) PCI add device 0000:00:12.0 > (XEN) PCI add device 0000:00:12.2 > (XEN) PCI add device 0000:00:13.0 > (XEN) PCI add device 0000:00:13.2 > (XEN) PCI add device 0000:00:14.0 > (XEN) PCI add device 0000:00:14.2 > (XEN) PCI add device 0000:00:14.3 > (XEN) PCI add device 0000:00:14.4 > (XEN) PCI add device 0000:00:14.5 > (XEN) PCI add device 0000:00:16.0 > (XEN) PCI add device 0000:00:16.2 > (XEN) PCI add device 0000:00:18.0 > (XEN) PCI add device 0000:00:18.1 > (XEN) PCI add device 0000:00:18.2 > (XEN) PCI add device 0000:00:18.3 > (XEN) PCI add device 0000:00:18.4 > (XEN) PCI add device 0000:07:00.0 > (XEN) PCI add device 0000:07:00.1 > (XEN) PCI add device 0000:06:00.0 > (XEN) PCI add device 0000:06:00.1 > pci 0000:06:00.1: Failed to add - passthrough or MSI/MSI-X might fail! > (XEN) PCI add device 0000:05:00.0 > (XEN) PCI add device 0000:04:00.0 > (XEN) PCI add device 0000:03:00.0 > (XEN) PCI add device 0000:02:00.0 > (XEN) PCI add device 0000:02:00.1 > ACPI: PCI Interrupt Link [LNKA] (IRQs *4 7 10 11 14 15) > ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 *10 11 14 15) > ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 *11 14 15) > ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 14 15) > ACPI: PCI Interrupt Link [LNKE] (IRQs 4 *7 10 11 14 15) > ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 *11 14 15) > ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 *10 11 14 15) > ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0, disabled. > xen/balloon: Initialising balloon driver. > xen-balloon: Initialising balloon driver. > vgaarb: device added: PCI:0000:07:00.0,decodes=io+mem,owns=io+mem,locks=none > vgaarb: loaded > vgaarb: bridge control possible 0000:07:00.0 > SCSI subsystem initialized > usbcore: registered new interface driver usbfs > usbcore: registered new interface driver hub > usbcore: registered new device driver usb > PCI: Using ACPI for IRQ routing > Switching to clocksource xen > FS-Cache: Loaded > CacheFiles: Loaded > pnp: PnP ACPI init > ACPI: bus type pnp registered > system 00:01: [mem 0xfec20000-0xfec200ff] could not be reserved > system 00:02: [mem 0xf6000000-0xf6003fff] has been reserved > xen_map_pirq_gsi: returning irq 8 for gsi 8 > xen_map_pirq_gsi: returning irq 13 for gsi 13 > system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved > system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved > system 00:09: [io 0x04d0-0x04d1] has been reserved > system 00:09: [io 0x040b] has been reserved > system 00:09: [io 0x04d6] has been reserved > system 00:09: [io 0x0c00-0x0c01] has been reserved > system 00:09: [io 0x0c14] has been reserved > system 00:09: [io 0x0c50-0x0c51] has been reserved > system 00:09: [io 0x0c52] has been reserved > system 00:09: [io 0x0c6c] has been reserved > system 00:09: [io 0x0c6f] has been reserved > system 00:09: [io 0x0cd0-0x0cd1] has been reserved > system 00:09: [io 0x0cd2-0x0cd3] has been reserved > system 00:09: [io 0x0cd4-0x0cd5] has been reserved > system 00:09: [io 0x0cd6-0x0cd7] has been reserved > system 00:09: [io 0x0cd8-0x0cdf] has been reserved > system 00:09: [io 0x0800-0x089f] has been reserved > system 00:09: [io 0x0b00-0x0b1f] has been reserved > system 00:09: [io 0x0b20-0x0b3f] has been reserved > system 00:09: [io 0x0900-0x090f] has been reserved > system 00:09: [io 0x0910-0x091f] has been reserved > system 00:09: [io 0xfe00-0xfefe] has been reserved > system 00:09: [mem 0xcff00000-0xcfffffff] has been reserved > system 00:09: [mem 0xffb80000-0xffbfffff] has been reserved > system 00:09: [mem 0xfec10000-0xfec1001f] has been reserved > system 00:09: [mem 0xfed80000-0xfed80fff] has been reserved > system 00:0a: [io 0x0230-0x023f] has been reserved > system 00:0a: [io 0x0290-0x029f] has been reserved > system 00:0a: [io 0x0f40-0x0f4f] has been reserved > system 00:0a: [io 0x0a30-0x0a3f] has been reserved > system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved > system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved > system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved > system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved > system 00:0c: [mem 0x00100000-0xcfefffff] could not be reserved > system 00:0c: [mem 0xfec00000-0xffffffff] could not be reserved > pnp: PnP ACPI: found 13 devices > ACPI: ACPI bus type pnp unregistered > pciback 0000:00:14.2: seizing device > PM-Timer failed consistency check (0x0xffffff) - aborting. > pci 0000:00:02.0: PCI bridge to [bus 07-07] > pci 0000:00:02.0: bridge window [io 0xe000-0xefff] > pci 0000:00:02.0: bridge window [mem 0xfe900000-0xfe9fffff] > pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] > pci 0000:00:04.0: PCI bridge to [bus 06-06] > pci 0000:00:04.0: bridge window [io 0xd000-0xdfff] > pci 0000:00:04.0: bridge window [mem 0xfe800000-0xfe8fffff] > pci 0000:00:05.0: PCI bridge to [bus 05-05] > pci 0000:00:05.0: bridge window [io 0xc000-0xcfff] > pci 0000:00:05.0: bridge window [mem 0xfe700000-0xfe7fffff] > pci 0000:00:06.0: PCI bridge to [bus 04-04] > pci 0000:00:06.0: bridge window [io 0xb000-0xbfff] > pci 0000:00:06.0: bridge window [mem 0xfe600000-0xfe6fffff] > pci 0000:00:07.0: PCI bridge to [bus 03-03] > pci 0000:00:07.0: bridge window [mem 0xfe500000-0xfe5fffff] > pci 0000:00:0d.0: PCI bridge to [bus 02-02] > pci 0000:00:0d.0: bridge window [io 0xa000-0xafff] > pci 0000:00:0d.0: bridge window [mem 0xfe400000-0xfe4fffff] > pci 0000:00:14.4: PCI bridge to [bus 01-01] > pci 0000:00:02.0: PCI INT A -> GSI 52 (level, low) -> IRQ 52 > xen_map_pirq_gsi: returning irq 52 for gsi 52 > Already setup the GSI :52 > pci 0000:00:04.0: PCI INT A -> GSI 52 (level, low) -> IRQ 52 > xen_map_pirq_gsi: returning irq 52 for gsi 52 > Already setup the GSI :52 > pci 0000:00:05.0: PCI INT A -> GSI 52 (level, low) -> IRQ 52 > pci 0000:00:06.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53 > xen_map_pirq_gsi: returning irq 53 for gsi 53 > Already setup the GSI :53 > pci 0000:00:07.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53 > pci 0000:00:0d.0: PCI INT A -> GSI 54 (level, low) -> IRQ 54 > NET: Registered protocol family 2 > IP route cache hash table entries: 65536 (order: 7, 524288 bytes) > TCP established hash table entries: 262144 (order: 10, 4194304 bytes) > TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) > TCP: Hash tables configured (established 262144 bind 65536) > TCP reno registered > UDP hash table entries: 1024 (order: 3, 32768 bytes) > UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) > NET: Registered protocol family 1 > Unpacking initramfs... > Freeing initrd memory: 6384k freed > microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, > Peter Oruba > NTFS driver 2.1.30 [Flags: R/W]. > msgmni has been set to 3870 > Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) > io scheduler noop registered (default) > pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt > pci 0000:07:00.0: Signaling PME through PCIe PME interrupt > pci 0000:07:00.1: Signaling PME through PCIe PME interrupt > pcieport 0000:00:04.0: Signaling PME through PCIe PME interrupt > pci 0000:06:00.0: Signaling PME through PCIe PME interrupt > pci 0000:06:00.1: Signaling PME through PCIe PME interrupt > pcieport 0000:00:05.0: Signaling PME through PCIe PME interrupt > pci 0000:05:00.0: Signaling PME through PCIe PME interrupt > pcieport 0000:00:06.0: Signaling PME through PCIe PME interrupt > pci 0000:04:00.0: Signaling PME through PCIe PME interrupt > pcieport 0000:00:07.0: Signaling PME through PCIe PME interrupt > pci 0000:03:00.0: Signaling PME through PCIe PME interrupt > pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt > pci 0000:02:00.0: Signaling PME through PCIe PME interrupt > pci 0000:02:00.1: Signaling PME through PCIe PME interrupt > pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 > ACPI: Power Button [PWRB] > input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 > ACPI: Power Button [PWRF] > ERST: Table is not found! > GHES: HEST is not enabled! > Event-channel device installed. > pciback 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > pciback 0000:00:14.2: PCI INT A disabled > xen-pciback: backend is vpci > Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled > serial 0000:02:00.0: PCI INT A -> GSI 40 (level, low) -> IRQ 40 > serial 0000:02:00.1: PCI INT B -> GSI 41 (level, low) -> IRQ 41 > 0000:02:00.1: ttyS0 at I/O 0xa880 (irq = 41) is a ST16650V2 > hpet_acpi_add: no address or irqs in _CRS > Non-volatile memory driver v1.3 > Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 > seconds). > Hangcheck: Using getrawmonotonic(). > loop: module loaded > ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 > ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode > ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part > scsi0 : ahci > scsi1 : ahci > scsi2 : ahci > scsi3 : ahci > scsi4 : ahci > scsi5 : ahci > ata1: SATA max UDMA/133 abar m1024@0xfe3fe000 port 0xfe3fe100 irq 19 > ata2: SATA max UDMA/133 abar m1024@0xfe3fe000 port 0xfe3fe180 irq 19 > ata3: SATA max UDMA/133 abar m1024@0xfe3fe000 port 0xfe3fe200 irq 19 > ata4: SATA max UDMA/133 abar m1024@0xfe3fe000 port 0xfe3fe280 irq 19 > ata5: SATA max UDMA/133 abar m1024@0xfe3fe000 port 0xfe3fe300 irq 19 > ata6: SATA max UDMA/133 abar m1024@0xfe3fe000 port 0xfe3fe380 irq 19 > ahci 0000:06:00.0: PCI INT A -> GSI 44 (level, low) -> IRQ 44 > ahci 0000:06:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode > ahci 0000:06:00.0: flags: 64bit ncq pm led clo pmp pio slum part > scsi6 : ahci > scsi7 : ahci > ata7: SATA max UDMA/133 abar m8192@0xfe8fe000 port 0xfe8fe100 irq 44 > ata8: SATA max UDMA/133 abar m8192@0xfe8fe000 port 0xfe8fe180 irq 44 > tun: Universal TUN/TAP device driver, 1.6 > tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx> > sky2: driver version 1.29 > sky2 0000:04:00.0: PCI INT A -> GSI 51 (level, low) -> IRQ 51 > sky2 0000:04:00.0: Yukon-2 Optima chip revision 1 > sky2 0000:04:00.0: eth0: addr 20:cf:30:6d:89:a5 > cdc_ncm: 04-Aug-2011 > usbcore: registered new interface driver cdc_ncm > firewire_ohci 0000:05:00.0: PCI INT A -> GSI 46 (level, low) -> IRQ 46 > firewire_ohci: Added fw-ohci device 0000:05:00.0, OHCI v1.10, 4 IR + 8 IT > contexts, quirks 0x11 > ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver > ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 > ehci_hcd 0000:00:12.2: EHCI Host Controller > ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 > ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh > workaround > ehci_hcd 0000:00:12.2: debug port 1 > ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe3fe400 > ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 > usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 > usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb1: Product: EHCI Host Controller > usb usb1: Manufacturer: Linux 3.2.0-rc2-11202-gd3507af-dirty ehci_hcd > usb usb1: SerialNumber: 0000:00:12.2 > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 5 ports detected > xen_map_pirq_gsi: returning irq 17 for gsi 17 > Already setup the GSI :17 > ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 > ehci_hcd 0000:00:13.2: EHCI Host Controller > ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 > ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh > workaround > ehci_hcd 0000:00:13.2: debug port 1 > ehci_hcd 0000:00:13.2: irq 17, io mem 0xfe3fe800 > ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 > usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 > usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb2: Product: EHCI Host Controller > usb usb2: Manufacturer: Linux 3.2.0-rc2-11202-gd3507af-dirty ehci_hcd > usb usb2: SerialNumber: 0000:00:13.2 > hub 2-0:1.0: USB hub found > hub 2-0:1.0: 5 ports detected > xen_map_pirq_gsi: returning irq 17 for gsi 17 > Already setup the GSI :17 > ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 > ehci_hcd 0000:00:16.2: EHCI Host Controller > ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3 > ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh > workaround > ata5: SATA link down (SStatus 0 SControl 300) > ata3: SATA link down (SStatus 0 SControl 300) > ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > ata6: SATA link down (SStatus 0 SControl 300) > ata4: SATA link down (SStatus 0 SControl 300) > ata2: SATA link down (SStatus 0 SControl 300) > ehci_hcd 0000:00:16.2: debug port 1 > ehci_hcd 0000:00:16.2: irq 17, io mem 0xfe3fec00 > ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00 > ata1.00: ATA-8: INTEL SSDSA2CW120G3, 4PC10362, max UDMA/133 > ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32) > usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 > ata7: SATA link down (SStatus 0 SControl 300) > ata8: SATA link down (SStatus 0 SControl 300) > usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb3: Product: EHCI Host Controller > usb usb3: Manufacturer: Linux 3.2.0-rc2-11202-gd3507af-dirty ehci_hcd > usb usb3: SerialNumber: 0000:00:16.2 > ata1.00: configured for UDMA/133 > scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA2CW12 4PC1 PQ: 0 ANSI: 5 > hub 3-0:1.0: USB hub found > hub 3-0:1.0: 4 ports detected > sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB) > sd 0:0:0:0: [sda] Write Protect is off > sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support > DPO or FUA > ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver > sda: sda1 sda2 > ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 > ohci_hcd 0000:00:12.0: OHCI Host Controller > ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4 > ohci_hcd 0000:00:12.0: irq 18, io mem 0xfe3f7000 > sd 0:0:0:0: [sda] Attached SCSI disk > usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb4: Product: OHCI Host Controller > usb usb4: Manufacturer: Linux 3.2.0-rc2-11202-gd3507af-dirty ohci_hcd > usb usb4: SerialNumber: 0000:00:12.0 > hub 4-0:1.0: USB hub found > hub 4-0:1.0: 5 ports detected > xen_map_pirq_gsi: returning irq 18 for gsi 18 > Already setup the GSI :18 > ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 > ohci_hcd 0000:00:13.0: OHCI Host Controller > ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 > ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe3fc000 > usb 1-1: new high-speed USB device number 2 using ehci_hcd > usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb5: Product: OHCI Host Controller > usb usb5: Manufacturer: Linux 3.2.0-rc2-11202-gd3507af-dirty ohci_hcd > usb usb5: SerialNumber: 0000:00:13.0 > hub 5-0:1.0: USB hub found > hub 5-0:1.0: 5 ports detected > firewire_core: created device fw0: GUID 001e8c0000de9136, S400 > xen_map_pirq_gsi: returning irq 18 for gsi 18 > Already setup the GSI :18 > ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > ohci_hcd 0000:00:14.5: OHCI Host Controller > ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6 > ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe3fd000 > usb 1-1: New USB device found, idVendor=0424, idProduct=2504 > usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 > hub 1-1:1.0: USB hub found > hub 1-1:1.0: 4 ports detected > usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb6: Product: OHCI Host Controller > usb usb6: Manufacturer: Linux 3.2.0-rc2-11202-gd3507af-dirty ohci_hcd > usb usb6: SerialNumber: 0000:00:14.5 > hub 6-0:1.0: USB hub found > hub 6-0:1.0: 2 ports detected > xen_map_pirq_gsi: returning irq 18 for gsi 18 > Already setup the GSI :18 > ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 > ohci_hcd 0000:00:16.0: OHCI Host Controller > ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7 > ohci_hcd 0000:00:16.0: irq 18, io mem 0xfe3ff000 > usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb7: Product: OHCI Host Controller > usb usb7: Manufacturer: Linux 3.2.0-rc2-11202-gd3507af-dirty ohci_hcd > usb usb7: SerialNumber: 0000:00:16.0 > hub 7-0:1.0: USB hub found > hub 7-0:1.0: 4 ports detected > xhci_hcd 0000:03:00.0: PCI INT A -> GSI 50 (level, low) -> IRQ 50 > xhci_hcd 0000:03:00.0: xHCI Host Controller > xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 8 > xhci_hcd 0000:03:00.0: irq 50, io mem 0xfe5fe000 > usb usb8: New USB device found, idVendor=1d6b, idProduct=0002 > usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb8: Product: xHCI Host Controller > usb usb8: Manufacturer: Linux 3.2.0-rc2-11202-gd3507af-dirty xhci_hcd > usb usb8: SerialNumber: 0000:03:00.0 > hub 8-0:1.0: USB hub found > hub 8-0:1.0: 2 ports detected > xhci_hcd 0000:03:00.0: xHCI Host Controller > xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 9 > usb usb9: New USB device found, idVendor=1d6b, idProduct=0003 > usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb9: Product: xHCI Host Controller > usb usb9: Manufacturer: Linux 3.2.0-rc2-11202-gd3507af-dirty xhci_hcd > usb usb9: SerialNumber: 0000:03:00.0 > hub 9-0:1.0: USB hub found > hub 9-0:1.0: 2 ports detected > usbcore: registered new interface driver usblp > usbcore: registered new interface driver uas > Initializing USB Mass Storage driver... > usbcore: registered new interface driver usb-storage > USB Mass Storage support registered. > usbcore: registered new interface driver libusual > usbcore: registered new interface driver ums_eneub6250 > i8042: PNP: No PS/2 controller found. Probing ports directly. > serio: i8042 KBD port at 0x60,0x64 irq 1 > serio: i8042 AUX port at 0x60,0x64 irq 12 > mousedev: PS/2 mouse device common for all mice > input: PC Speaker as /devices/platform/pcspkr/input/input2 > rtc_cmos 00:04: RTC can wake from S4 > rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 > rtc0: alarms up to one month, y3k, 114 bytes nvram > i2c /dev entries driver > piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 > ATK0110 ATK0110:00: EC enabled > SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01 > SP5100 TCO timer: mmio address 0xb8fe00 already in use > IT87 WDT: Chip IT8721 revision 1 initialized. timeout=60 sec (nowayout=0 > testmode=0 exclusive=1 nogameport=0) > wdt: Xen WatchDog Timer Driver v0.01 > wdt: cannot register miscdev on minor=130 (-16) > wdt: probe of wdt failed with error -16 > device-mapper: uevent: version 1.0.3 > device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: > dm-devel@xxxxxxxxxx > EDAC MC: Ver: 2.1.0 > AMD64 EDAC driver v3.4.0 > usb 4-2: new full-speed USB device number 2 using ohci_hcd > EDAC amd64: DRAM ECC disabled. > EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not > load. > Either enable ECC checking or force module loading by setting > 'ecc_enable_override'. > (Note that use of the override may cause unknown side effects.) > usbcore: registered new interface driver usbhid > usbhid: USB HID core driver > TCP cubic registered > NET: Registered protocol family 17 > rtc_cmos 00:04: setting system clock to 2012-05-07 11:07:15 UTC (1336388835) > powernow-k8: Found 1 AMD Phenom(tm) II X6 1075T Processor (6 cpu cores) > (version 2.20.00) > powernow-k8: Core Performance Boosting: on. > powernow-k8: invalid pstate 1 - bad value 1. > powernow-k8: Please report to BIOS manufacturer > powernow-k8: invalid pstate 2 - bad value 2. > powernow-k8: Please report to BIOS manufacturer > powernow-k8: invalid pstate 3 - bad value 3. > powernow-k8: Please report to BIOS manufacturer > [Firmware Bug]: powernow-k8: invalid powernow_table > Freeing unused kernel memory: 596k freed > Loading, please wait... > udev[1087]: starting version 164 > usb 4-2: New USB device found, idVendor=041e, idProduct=30dc > usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 > usb 4-2: Product: Sound Blaster Tactic(3D) Alpha > usb 4-2: Manufacturer: Creative Technology Ltd > usb 4-2: SerialNumber: 00023162 > input: Creative Technology Ltd Sound Blaster Tactic(3D) Alpha as > /devices/pci0000:00/0000:00:12.0/usb4/4-2/4-2:1.3/input/input3 > generic-usb 0003:041E:30DC.0001: input,hiddev0: USB HID v1.00 Device > [Creative Technology Ltd Sound Blaster Tactic(3D) Alpha] on > usb-0000:00:12.0-2/input3 > Begin: Loading essential drivers ... done. > Begin: Running /scripts/init-premount ... done. > Begin: Mounting root file system ... Begin: Running /scripts/local-top ... > usb 1-1.1: new full-speed USB device number 4 using ehci_hcd > done. > Begin: Running /scripts/local-premount ... done. > EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) > Begin: Running /scripts/local-bottom ... done. > done. > Begin: Running /scripts/init-bottom ... usb 1-1.1: New USB device found, > idVendor=1532, idProduct=0013 > usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 > usb 1-1.1: Product: Razer Orochi > usb 1-1.1: Manufacturer: Razer > input: Razer Razer Orochi as > /devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1.1/1-1.1:1.0/input/input4 > generic-usb 0003:1532:0013.0002: input: USB HID v1.11 Mouse [Razer Razer > Orochi] on usb-0000:00:12.2-1.1/input0 > input: Razer Razer Orochi as > /devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1.1/1-1.1:1.1/input/input5 > generic-usb 0003:1532:0013.0003: input: USB HID v1.11 Keyboard [Razer Razer > Orochi] on usb-0000:00:12.2-1.1/input1 > done. > INIT: version 2.88 booting > usb 1-1.2: new low-speed USB device number 5 using ehci_hcd > Using makefile-style concurrent boot in runlevel S. > Files under mount point '/lib/init/rw' will be hidden. ... (warning). > usb 1-1.2: New USB device found, idVendor=04f2, idProduct=0403 > usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 > usb 1-1.2: Product: USB Keyboard > usb 1-1.2: Manufacturer: Chicony > Files under mount point '/var/run' will be hidden. ...input: Chicony USB > Keyboard as > /devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1.2/1-1.2:1.0/input/input6 > generic-usb 0003:04F2:0403.0004: input: USB HID v1.11 Keyboard [Chicony USB > Keyboard] on usb-0000:00:12.2-1.2/input0 > (warning). > input: Chicony USB Keyboard as > /devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1.2/1-1.2:1.1/input/input7 > generic-usb 0003:04F2:0403.0005: input,hiddev0: USB HID v1.11 Device [Chicony > USB Keyboard] on usb-0000:00:12.2-1.2/input1 > firewire_net: firewire0: IPv4 over FireWire on device 001e8c0000de9136 > firewire_core: refreshed device fw0 > Files under mount point '/var/lock' will be hidden. ... (warning). > Starting the hotplug events dispatcher: udevdudev[1296]: starting version 164 > . > Synthesizing the initial hotplug events...done. > Waiting for /dev to be fully populated...done. > Setting hostname to 'xen'...done. > Setting preliminary keymap...done. > Activating swap:. > EXT4-fs (dm-0): re-mounted. Opts: (null) > Will now check root file system:fsck from util-linux-ng 2.17.2 > [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a -C0 /dev/mapper/lemrouch-xen > /dev/mapper/lemrouch-xen: clean, 175647/1310720 files, 1276770/5242880 blocks > . > EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro > Loading kernel module firewire-sbp2. > Loading kernel module loop. > Cleaning up ifupdown.... > Setting up networking.... > Setting up LVM Volume Groups Reading all physical volumes. This may take a > while... > Found volume group "lemrouch" using metadata type lvm2 > 4 logical volume(s) in volume group "lemrouch" now active > . > Will now activate lvm and md swap:done. > Will now check all file systems. > fsck from util-linux-ng 2.17.2 > Checking all file systems. > Done checking file systems. A log is being saved in /var/log/fsck/checkfs if > that location is writable.. > Will now mount local filesystems:EXT4-fs (sda1): warning: mounting unchecked > fs, running e2fsck is recommended > EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) > . > Will now activate swapfile swap:done. > Cleaning up temporary files...Cleaning /tmp...done. > . > Checking minimum space in /tmp...done. > Setting kernel variables ... /etc/sysctl.conf...done. > Initializing random number generator...done. > Setting up X server socket directory /tmp/.X11-unix.... > Setting up ICE socket directory /tmp/.ICE-unix.... > Configuring network interfaces...device eth0 entered promiscuous mode > sky2 0000:04:00.0: eth0: enabling interface > done. > Cleaning up temporary files.... > Starting filesystem in userspace: fuse. > Setting console screen modes. > cannot (un)set powersave mode > Skipping font and keymap setup (handled by console-setup). > Setting up console font and keymap...done. > Setting sensors limits. > INIT: Entering runlevel: 3 > Using makefile-style concurrent boot in runlevel 3. > Not starting fancontrol; run pwmconfig first. ... (warning). > acpid: starting up with netlink and the input layer > > acpid: 1 rule loaded > > acpid: waiting for events: event logging is off > > Starting ACPI services.... > Starting system message bus: dbus. > Starting the Winbind daemon: winbind.sshd (2066): /pr > oc/2066/oom_adj is deprecated, please use /proc/2066/oom_score_adj instead. > XENBUS: Unable to read cpu state > XENBUS: Unable to read cpu state > XENBUS: Unable to read cpu state > XENBUS: Unable to read cpu state > XENBUS: Unable to read cpu state > XENBUS: Unable to read cpu state > Starting oxenstored... > Setting domain 0 name... > Starting xenconsoled... > Starting OpenBSD Secure Shell server: sshd. > Starting domain name service...: bind9. > Starting Samba daemons: nmbd smbd. > Starting periodic command scheduler: cron. > Starting Postfix Mail Transport Agent: postfix. > BLKTAPCTRL[2231]: blktapctrl.c:792: blktapctrl: v1.0.0 > > BLKTAPCTRL[2231]: blktapctrl.c:794: Found driver: [raw image (aio)] > > BLKTAPCTRL[2231]: blktapctrl.c:794: Found driver: [raw image (sync)] > > BLKTAPCTRL[2231]: blktapctrl.c:794: Found driver: [vmware image (vmdk)] > > BLKTAPCTRL[2231]: blktapctrl.c:794: Found driver: [ramdisk image (ram)] > > BLKTAPCTRL[2231]: blktapctrl.c:794: Found driver: [qcow disk (qcow)] > > BLKTAPCTRL[2231]: blktapctrl.c:794: Found driver: [qcow2 disk (qcow2)] > > BLKTAPCTRL[2231]: blktapctrl_linux.c:86: blktap0 open failed > > BLKTAPCTRL[2231]: blktapctrl.c:861: couldn't open blktap interface > > BLKTAPCTRL[2231]: blktapctrl.c:924: Unable to start blktapctrl > > Starting S.M.A.R.T. daemon: smartd. > sky2 0000:04:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control > both > br0: port 1(eth0) entering forwarding state > br0: port 1(eth0) entering forwarding state > br0: port 1(eth0) entering forwarding state > Running local boot scripts (/etc/rc.local)(XEN) PCI remove device 0000:00:12.2 > acpid: input device has been disconnected > > acpid: input device has been disconnected > > acpid: input device has been disconnected > > (XEN) PCI remove device 0000:00:13.2 > (XEN) PCI remove device 0000:00:16.2 > (XEN) PCI add device 0000:00:12.2 > (XEN) PCI add device 0000:00:13.2 > (XEN) PCI add device 0000:00:16.2 > [CPU0] failed to set governor name > [CPU1] failed to set governor name > [CPU2] failed to set governor name > [CPU3] failed to set governor name > [CPU4] failed to set governor name > [CPU5] failed to set governor name > . > acpid: input device has been disconnected > > acpid: input device has been disconnected > > acpid: input device has been disconnected > > acpid: input device has been disconnected > > (XEN) ioport_map:add: dom1 gport=3b0 mport=3b0 nr=c > (XEN) memory_map:add: dom1 gfn=a0 mfn=a0 nr=20 > (XEN) ioport_map:add: dom1 gport=3c0 mport=3c0 nr=3 > (XEN) ioport_map:add: dom1 gport=3c4 mport=3c4 nr=1c > (XEN) HVM1: HVM Loader > (XEN) HVM1: Detected Xen v4.2-unstable > (XEN) HVM1: Xenbus rings @0xfeffc000, event channel 8 > (XEN) HVM1: System requested ROMBIOS > (XEN) HVM1: CPU speed is 3010 MHz > (XEN) irq.c:270: Dom1 PCI link 0 changed 0 -> 5 > (XEN) HVM1: PCI-ISA link 0 routed to IRQ5 > (XEN) irq.c:270: Dom1 PCI link 1 changed 0 -> 10 > (XEN) HVM1: PCI-ISA link 1 routed to IRQ10 > (XEN) irq.c:270: Dom1 PCI link 2 changed 0 -> 11 > (XEN) HVM1: PCI-ISA link 2 routed to IRQ11 > (XEN) irq.c:270: Dom1 PCI link 3 changed 0 -> 5 > (XEN) HVM1: PCI-ISA link 3 routed to IRQ5 > (XEN) HVM1: pci dev 01:3 INTA->IRQ10 > (XEN) HVM1: pci dev 03:0 INTA->IRQ5 > (XEN) HVM1: pci dev 04:0 INTA->IRQ5 > (XEN) HVM1: pci dev 05:0 INTA->IRQ10 > (XEN) HVM1: pci dev 06:0 INTB->IRQ5 > (XEN) HVM1: pci dev 07:0 INTA->IRQ5 > (XEN) HVM1: pci dev 08:0 INTB->IRQ10 > (XEN) HVM1: pci dev 09:0 INTA->IRQ10 > (XEN) HVM1: pci dev 05:0 bar 10 size 10000000: e000000c > (XEN) memory_map:add: dom1 gfn=e0000 mfn=d0000 nr=10000 > (XEN) HVM1: pci dev 03:0 bar 14 size 01000000: f0000008 > (XEN) HVM1: pci dev 04:0 bar 10 size 00020000: f1000000 > (XEN) memory_map:add: dom1 gfn=f1020 mfn=fe9e0 nr=20 > (XEN) HVM1: pci dev 05:0 bar 18 size 00020000: f1020004 > (XEN) HVM1: pci dev 05:0 bar 30 size 00020000: f1040000 > (XEN) HVM1: pci dev 06:0 bar 10 size 00004000: f1060004 > (XEN) memory_map:add: dom1 gfn=f1060 mfn=fe9bc nr=4 > (XEN) HVM1: pci dev 09:0 bar 10 size 00004000: f1064004 > (XEN) memory_map:add: dom1 gfn=f1064 mfn=fe3f8 nr=4 > (XEN) HVM1: pci dev 07:0 bar 10 size 00001000: f1068000 > (XEN) memory_map:add: dom1 gfn=f1068 mfn=fe3f7 nr=1 > (XEN) HVM1: pci dev 08:0 bar 10 size 00001000: f1069000 > (XEN) memory_map:add: dom1 gfn=f1069 mfn=f0000 nr=1 > (XEN) HVM1: pci dev 03:0 bar 10 size 00000100: 0000c001 > (XEN) HVM1: pci dev 05:0 bar 20 size 00000100: 0000c101 > (XEN) HVM1: pci dev 04:0 bar 14 size 00000040: 0000c201 > (XEN) HVM1: pci dev 01:1 bar 20 size 00000010: 0000c241 > (XEN) HVM1: Multiprocessor initialisation: > (XEN) HVM1: - CPU0 ... 48-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... > done. > (XEN) HVM1: - CPU1 ... 48-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... > done. > (XEN) HVM1: - CPU2 ... 48-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... > done. > (XEN) HVM1: - CPU3 ... 48-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... > done. > (XEN) HVM1: - CPU4 ... 48-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... > done. > (XEN) HVM1: - CPU5 ... 48-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... > done. > (XEN) HVM1: Testing HVM environment: > (XEN) HVM1: - REP INSB across page boundaries ... passed > (XEN) HVM1: - GS base MSRs and SWAPGS ... passed > (XEN) HVM1: Passed 2 of 2 tests > (XEN) HVM1: Writing SMBIOS tables ... > (XEN) HVM1: Loading ROMBIOS ... > (XEN) HVM1: 9660 bytes of ROMBIOS high-memory extensions: > (XEN) HVM1: Relocating to 0xfc001000-0xfc0035bc ... done > (XEN) HVM1: Creating MP tables ... > (XEN) HVM1: Loading VGABIOS of passthroughed gfx ... > (XEN) HVM1: Loading PCI Option ROM ... > (XEN) HVM1: - Manufacturer: http://ipxe.org > (XEN) HVM1: - Product name: iPXE > (XEN) HVM1: Option ROMs: > (XEN) HVM1: c0000-cffff: VGA BIOS > (XEN) HVM1: d0000-e0fff: Etherboot ROM > (XEN) HVM1: Loading ACPI ... > (XEN) HVM1: vm86 TSS at fc00f700 > (XEN) HVM1: BIOS map: > (XEN) HVM1: f0000-fffff: Main BIOS > (XEN) HVM1: E820 table: > (XEN) HVM1: [00]: 00000000:00000000 - 00000000:0009e000: RAM > (XEN) HVM1: [01]: 00000000:0009e000 - 00000000:000a0000: RESERVED > (XEN) HVM1: HOLE: 00000000:000a0000 - 00000000:000e0000 > (XEN) HVM1: [02]: 00000000:000e0000 - 00000000:00100000: RESERVED > (XEN) HVM1: [03]: 00000000:00100000 - 00000000:e0000000: RAM > (XEN) HVM1: HOLE: 00000000:e0000000 - 00000000:fc000000 > (XEN) HVM1: [04]: 00000000:fc000000 - 00000001:00000000: RESERVED > (XEN) HVM1: [05]: 00000001:00000000 - 00000001:20000000: RAM > (XEN) HVM1: Invoking ROMBIOS ... > (XEN) HVM1: $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $ > (XEN) HVM1: Bochs BIOS - build: 06/23/99 > (XEN) HVM1: $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $ > (XEN) HVM1: Options: apmbios pcibios eltorito PMM > (XEN) HVM1: > (XEN) HVM1: ata0-0: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 > (XEN) HVM1: ata0 master: QEMU HARDDISK ATA-7 Hard-Disk (20480 MBytes) > (XEN) HVM1: ata0-1: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 > (XEN) HVM1: ata0 slave: QEMU HARDDISK ATA-7 Hard-Disk (51200 MBytes) > (XEN) HVM1: > (XEN) HVM1: > (XEN) HVM1: > (XEN) HVM1: Press F12 for boot menu. > (XEN) HVM1: > (XEN) HVM1: Booting from Hard Disk... > (XEN) HVM1: Booting from 0000:7c00 > (XEN) irq.c:270: Dom1 PCI link 0 changed 5 -> 0 > (XEN) irq.c:270: Dom1 PCI link 1 changed 10 -> 0 > (XEN) irq.c:270: Dom1 PCI link 2 changed 11 -> 0 > (XEN) irq.c:270: Dom1 PCI link 3 changed 5 -> 0 > (XEN) memory_map:remove: dom1 gfn=e0000 mfn=d0000 nr=10000 > (XEN) memory_map:remove: dom1 gfn=f1020 mfn=fe9e0 nr=20 > (XEN) memory_map:add: dom1 gfn=e0000 mfn=d0000 nr=10000 > (XEN) memory_map:add: dom1 gfn=f1020 mfn=fe9e0 nr=20 > (XEN) memory_map:remove: dom1 gfn=f1060 mfn=fe9bc nr=4 > (XEN) memory_map:add: dom1 gfn=f1060 mfn=fe9bc nr=4 > (XEN) memory_map:remove: dom1 gfn=f1068 mfn=fe3f7 nr=1 > (XEN) memory_map:add: dom1 gfn=f1068 mfn=fe3f7 nr=1 > (XEN) memory_map:remove: dom1 gfn=f1069 mfn=f0000 nr=1 > (XEN) memory_map:add: dom1 gfn=f1069 mfn=f0000 nr=1 > (XEN) memory_map:remove: dom1 gfn=f1064 mfn=fe3f8 nr=4 > (XEN) memory_map:add: dom1 gfn=f1064 mfn=fe3f8 nr=4 > (XEN) grant_table.c:1174:d1 Expanding dom (1) grant table from (4) to (32) > frames. > (XEN) irq.c:350: Dom1 callback via changed to GSI 28 > (XEN) memory_map:remove: dom1 gfn=e0000 mfn=d0000 nr=10000 > (XEN) memory_map:remove: dom1 gfn=f1020 mfn=fe9e0 nr=20 > (XEN) memory_map:add: dom1 gfn=e0000 mfn=d0000 nr=10000 > (XEN) memory_map:add: dom1 gfn=f1020 mfn=fe9e0 nr=20 > (XEN) memory_map:remove: dom1 gfn=f1068 mfn=fe3f7 nr=1 > (XEN) memory_map:add: dom1 gfn=f1068 mfn=fe3f7 nr=1 > (XEN) memory_map:remove: dom1 gfn=f1060 mfn=fe9bc nr=4 > (XEN) memory_map:add: dom1 gfn=f1060 mfn=fe9bc nr=4 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0701, fault address = > 0x9db44000 > (XEN) memory_map:remove: dom1 gfn=f1069 mfn=f0000 nr=1 > (XEN) memory_map:add: dom1 gfn=f1069 mfn=f0000 nr=1 > (XEN) memory_map:remove: dom1 gfn=f1064 mfn=fe3f8 nr=4 > (XEN) memory_map:add: dom1 gfn=f1064 mfn=fe3f8 nr=4 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x00a2, fault address = > 0x9debe000 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x00a2, fault address = > 0x9debe000 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x00a2, fault address = > 0x9debe000 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0092, fault address = > 0xa94324e0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0092, fault address = > 0xa94324b0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0092, fault address = > 0xa9432510 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0092, fault address = > 0xa9432510 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0092, fault address = > 0xa9432510 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0092, fault address = > 0xa9432510 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0092, fault address = > 0xa9508a80 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0700, fault address = > 0x9d7ab000 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0700, fault address = > 0x9d7ab040 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0700, fault address = > 0x9d7ab080 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0700, fault address = > 0x9d7ab0c0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0700, fault address = > 0x9d7ab100 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0700, fault address = > 0x9d7ab140 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0700, fault address = > 0x9d7ab180 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0700, fault address = > 0x9d7ab1c0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0700, fault address = > 0x9d7ab200 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0700, fault address = > 0x9d7ab240 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0700, fault address = > 0x9d7ab280 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0700, fault address = > 0x9d7ab2c0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0700, fault address = > 0x9d7ab300 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0700, fault address = > 0x9d7ab340 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0700, fault address = > 0x9d7ab340 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0700, fault address = > 0x9d7ab380 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0700, fault address = > 0x9d7ab380 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0700, fault address = > 0x9d7ab3c0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0700, fault address = > 0x9d7ab3c0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0090, fault address = > 0xa9526460 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0090, fault address = > 0xa9526460 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0090, fault address = > 0xa9526460 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0090, fault address = > 0xa9526460 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0090, fault address = > 0xa9526460 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0090, fault address = > 0xa9526460 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0092, fault address = > 0xa9432a30 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0092, fault address = > 0xa9432a30 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0092, fault address = > 0xa9432a30 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0092, fault address = > 0xa9432a30 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0092, fault address = > 0xa9538a30 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0092, fault address = > 0xa952ca30 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0092, fault address = > 0xa9432a30 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0092, fault address = > 0xa950ea80 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0092, fault address = > 0xa9538a30 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0090, fault address = > 0xa9526460 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0090, fault address = > 0xa9526460 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0090, fault address = > 0xa9526460 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0092, fault address = > 0xa952ca30 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0092, fault address = > 0xa952ca30 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0092, fault address = > 0xa952ca30 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0092, fault address = > 0xa952ca30 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0092, fault address = > 0xa9526a30 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0092, fault address = > 0xa9538a30 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0092, fault address = > 0xa961aa30 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0092, fault address = > 0xa9432a30 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0092, fault address = > 0xa96f6a80 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0092, fault address = > 0xa961aa30 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0092, fault address = > 0xa961aa30 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0092, fault address = > 0xa961aa30 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0092, fault address = > 0xa961aa30 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0092, fault address = > 0xa9514a30 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0092, fault address = > 0xa952ca30 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0092, fault address = > 0xa9432a30 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0092, fault address = > 0xa950ea80 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0092, fault address = > 0xa9538a30 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0092, fault address = > 0xa952ca30 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0092, fault address = > 0xa952ca30 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0092, fault address = > 0xa952ca30 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0092, fault address = > 0xa952ca30 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0092, fault address = > 0xa9514a30 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0092, fault address = > 0xa961aa30 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0092, fault address = > 0xa9526a30 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0092, fault address = > 0xa9432a30 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0092, fault address = > 0xa9402a80 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0092, fault address = > 0xa9526a30 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0092, fault address = > 0xa9526a30 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0092, fault address = > 0xa9526a30 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0092, fault address = > 0xa9526a30 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0092, fault address = > 0xa9432a30 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0092, fault address = > 0xa9514a30 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0092, fault address = > 0xa961aa30 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0092, fault address = > 0xa952ca30 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0092, fault address = > 0xa9402a80 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0092, fault address = > 0xa961aa30 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0092, fault address = > 0xa961aa30 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0092, fault address = > 0xa961aa30 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0092, fault address = > 0xa961aa30 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0092, fault address = > 0xa9514a30 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0092, fault address = > 0xa952ca30 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0092, fault address = > 0xa9432a30 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0092, fault address = > 0xa9526a30 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0092, fault address = > 0xa96fca80 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0092, fault address = > 0xa9432a30 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0092, fault address = > 0xa9432a30 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0092, fault address = > 0xa9432a30 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0092, fault address = > 0xa9432a30 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0092, fault address = > 0xa9526a30 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0092, fault address = > 0xa952ca30 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0092, fault address = > 0xa9514a30 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0092, fault address = > 0xa961aa30 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 1, device id = 0x0092, fault address = > 0xa96fca80 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xdfe80080 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xdfe80000 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xdfe80000 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xdfe80040 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xdfe80000 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xdfe80080 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xdfe80000 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x0090, fault address = > 0xffffffc0 > diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h > index aa0f913..259ef7f 100644 > --- a/arch/x86/include/asm/paravirt.h > +++ b/arch/x86/include/asm/paravirt.h > @@ -340,11 +340,18 @@ static inline void write_idt_entry(gate_desc *dt, int > entry, const gate_desc *g) > { > PVOP_VCALL3(pv_cpu_ops.write_idt_entry, dt, entry, g); > } > + > static inline void set_iopl_mask(unsigned mask) > { > PVOP_VCALL1(pv_cpu_ops.set_iopl_mask, mask); > } > > +static inline void set_io_bitmap(struct thread_struct *thread, > + unsigned long bytes_updated) > +{ > + PVOP_VCALL2(pv_cpu_ops.set_io_bitmap, thread, bytes_updated); > +} > + > /* The paravirtualized I/O functions */ > static inline void slow_down_io(void) > { > diff --git a/arch/x86/include/asm/paravirt_types.h > b/arch/x86/include/asm/paravirt_types.h > index 8e8b9a4..96f267c 100644 > --- a/arch/x86/include/asm/paravirt_types.h > +++ b/arch/x86/include/asm/paravirt_types.h > @@ -142,6 +142,8 @@ struct pv_cpu_ops { > void (*load_sp0)(struct tss_struct *tss, struct thread_struct *t); > > void (*set_iopl_mask)(unsigned mask); > + void (*set_io_bitmap)(struct thread_struct *thread, > + unsigned long bytes_updated); > > void (*wbinvd)(void); > void (*io_delay)(void); > diff --git a/arch/x86/include/asm/processor.h > b/arch/x86/include/asm/processor.h > index 4fa7dcc..62becce 100644 > --- a/arch/x86/include/asm/processor.h > +++ b/arch/x86/include/asm/processor.h > @@ -503,6 +503,9 @@ static inline void native_set_iopl_mask(unsigned mask) > #endif > } > > +extern void native_set_io_bitmap(struct thread_struct *thread, > + unsigned long updated_bytes); > + > static inline void > native_load_sp0(struct tss_struct *tss, struct thread_struct *thread) > { > @@ -536,6 +539,7 @@ static inline void load_sp0(struct tss_struct *tss, > } > > #define set_iopl_mask native_set_iopl_mask > +#define set_io_bitmap native_set_io_bitmap > #endif /* CONFIG_PARAVIRT */ > > /* > diff --git a/arch/x86/kernel/ioport.c b/arch/x86/kernel/ioport.c > index 8c96897..c372ef0 100644 > --- a/arch/x86/kernel/ioport.c > +++ b/arch/x86/kernel/ioport.c > @@ -17,13 +17,29 @@ > #include <linux/bitmap.h> > #include <asm/syscalls.h> > > +void native_set_io_bitmap(struct thread_struct *t, > + unsigned long bytes_updated) > +{ > + struct tss_struct *tss; > + > + if (!bytes_updated) > + return; > + > + tss = &__get_cpu_var(init_tss); > + > + /* Update the TSS: */ > + if (t->io_bitmap_ptr) > + memcpy(tss->io_bitmap, t->io_bitmap_ptr, bytes_updated); > + else > + memset(tss->io_bitmap, 0xff, bytes_updated); > +} > + > /* > * this changes the io permissions bitmap in the current task. > */ > asmlinkage long sys_ioperm(unsigned long from, unsigned long num, int > turn_on) > { > struct thread_struct *t = ¤t->thread; > - struct tss_struct *tss; > unsigned int i, max_long, bytes, bytes_updated; > > if ((from + num <= from) || (from + num > IO_BITMAP_BITS)) > @@ -48,13 +64,13 @@ asmlinkage long sys_ioperm(unsigned long from, unsigned > long num, int turn_on) > } > > /* > - * do it in the per-thread copy and in the TSS ... > + * do it in the per-thread copy > * > - * Disable preemption via get_cpu() - we must not switch away > + * Disable preemption - we must not switch away > * because the ->io_bitmap_max value must match the bitmap > * contents: > */ > - tss = &per_cpu(init_tss, get_cpu()); > + preempt_disable(); > > if (turn_on) > bitmap_clear(t->io_bitmap_ptr, from, num); > @@ -75,10 +91,9 @@ asmlinkage long sys_ioperm(unsigned long from, unsigned > long num, int turn_on) > > t->io_bitmap_max = bytes; > > - /* Update the TSS: */ > - memcpy(tss->io_bitmap, t->io_bitmap_ptr, bytes_updated); > + set_io_bitmap(t, bytes_updated); > > - put_cpu(); > + preempt_enable(); > > return 0; > } > diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c > index ab13760..aa420e7 100644 > --- a/arch/x86/kernel/paravirt.c > +++ b/arch/x86/kernel/paravirt.c > @@ -391,6 +391,7 @@ struct pv_cpu_ops pv_cpu_ops = { > .swapgs = native_swapgs, > > .set_iopl_mask = native_set_iopl_mask, > + .set_io_bitmap = native_set_io_bitmap, > .io_delay = native_io_delay, > > .start_context_switch = paravirt_nop, > diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c > index 1d92a5a..e8436cc 100644 > --- a/arch/x86/kernel/process.c > +++ b/arch/x86/kernel/process.c > @@ -91,16 +91,12 @@ void exit_thread(void) > unsigned long *bp = t->io_bitmap_ptr; > > if (bp) { > - struct tss_struct *tss = &per_cpu(init_tss, get_cpu()); > - > + preempt_disable(); > t->io_bitmap_ptr = NULL; > clear_thread_flag(TIF_IO_BITMAP); > - /* > - * Careful, clear this in the TSS too: > - */ > - memset(tss->io_bitmap, 0xff, t->io_bitmap_max); > + set_io_bitmap(t, t->io_bitmap_max); > t->io_bitmap_max = 0; > - put_cpu(); > + preempt_enable(); > kfree(bp); > } > } > @@ -237,19 +233,11 @@ void __switch_to_xtra(struct task_struct *prev_p, > struct task_struct *next_p, > hard_enable_TSC(); > } > > - if (test_tsk_thread_flag(next_p, TIF_IO_BITMAP)) { > - /* > - * Copy the relevant range of the IO bitmap. > - * Normally this is 128 bytes or less: > - */ > - memcpy(tss->io_bitmap, next->io_bitmap_ptr, > - max(prev->io_bitmap_max, next->io_bitmap_max)); > - } else if (test_tsk_thread_flag(prev_p, TIF_IO_BITMAP)) { > - /* > - * Clear any possible leftover bits: > - */ > - memset(tss->io_bitmap, 0xff, prev->io_bitmap_max); > - } > + if (test_tsk_thread_flag(next_p, TIF_IO_BITMAP) || > + test_tsk_thread_flag(prev_p, TIF_IO_BITMAP)) > + set_io_bitmap(next, > + max(prev->io_bitmap_max, next->io_bitmap_max)); > + > propagate_user_return_notify(prev_p, next_p); > } > > diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c > index 8853204..7a05509 100644 > --- a/arch/x86/xen/enlighten.c > +++ b/arch/x86/xen/enlighten.c > @@ -808,6 +808,18 @@ static void xen_set_iopl_mask(unsigned mask) > HYPERVISOR_physdev_op(PHYSDEVOP_set_iopl, &set_iopl); > } > > +static void xen_set_io_bitmap(struct thread_struct *thread, > + int changed, unsigned long bytes_updated) > +{ > + struct physdev_set_iobitmap set_iobitmap; > + > + set_xen_guest_handle(set_iobitmap.bitmap, > + (char *)thread->io_bitmap_ptr); > + set_iobitmap.nr_ports = thread->io_bitmap_ptr ? IO_BITMAP_BITS : 0; > + WARN_ON(HYPERVISOR_physdev_op(PHYSDEVOP_set_iobitmap, > + &set_iobitmap)); > +} > + > static void xen_io_delay(void) > { > } > @@ -1117,6 +1129,7 @@ static const struct pv_cpu_ops xen_cpu_ops __initconst > = { > .load_sp0 = xen_load_sp0, > > .set_iopl_mask = xen_set_iopl_mask, > + .set_io_bitmap = xen_set_io_bitmap, > .io_delay = xen_io_delay, > > /* Xen takes care of %gs when switching to usermode for us */ > __ __ _ _ ____ _ _ _ > \ \/ /___ _ __ | || | |___ \ _ _ _ __ ___| |_ __ _| |__ | | ___ > \ // _ \ '_ \ | || |_ __) |__| | | | '_ \/ __| __/ _` | '_ \| |/ _ \ > / \ __/ | | | |__ _| / __/|__| |_| | | | \__ \ || (_| | |_) | | __/ > /_/\_\___|_| |_| |_|(_)_____| \__,_|_| |_|___/\__\__,_|_.__/|_|\___| > > (XEN) Xen version 4.2-unstable (root@(none)) (gcc version 4.4.5 (Debian > 4.4.5-8) ) Sat May 5 15:48:48 CEST 2012 > (XEN) Latest ChangeSet: Fri May 04 11:18:48 2012 +0100 25259:0f53540494f7 > (XEN) Console output is synchronous. > (XEN) Bootloader: GRUB 1.98+20100804-14+squeeze1 > (XEN) Command line: placeholder dom0_mem=2G dom0_max_vcpus=6 loglvl=all > guest_loglvl=all sync_console com1=115200,8n1,0xac00 console=com1 > (XEN) Video information: > (XEN) VGA is text mode 80x25, font 8x16 > (XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds > (XEN) Disc information: > (XEN) Found 1 MBR signatures > (XEN) Found 1 EDD information structures > (XEN) Xen-e820 RAM map: > (XEN) 0000000000000000 - 000000000009ac00 (usable) > (XEN) 000000000009ac00 - 00000000000a0000 (reserved) > (XEN) 00000000000e4000 - 0000000000100000 (reserved) > (XEN) 0000000000100000 - 00000000cfe80000 (usable) > (XEN) 00000000cfe80000 - 00000000cfe98000 (ACPI data) > (XEN) 00000000cfe98000 - 00000000cfec0000 (ACPI NVS) > (XEN) 00000000cfec0000 - 00000000cff00000 (reserved) > (XEN) 00000000ffe00000 - 0000000100000000 (reserved) > (XEN) 0000000100000000 - 0000000230000000 (usable) > (XEN) ACPI: RSDP 000FBF20, 0024 (r2 ACPIAM) > (XEN) ACPI: XSDT CFE80100, 005C (r1 102811 XSDT1740 20111028 MSFT 97) > (XEN) ACPI: FACP CFE80290, 00F4 (r3 102811 FACP1740 20111028 MSFT 97) > (XEN) ACPI: DSDT CFE80470, E6E3 (r1 A1595 A1595000 0 INTL 20060113) > (XEN) ACPI: FACS CFE98000, 0040 > (XEN) ACPI: APIC CFE80390, 0098 (r1 102811 APIC1740 20111028 MSFT 97) > (XEN) ACPI: MCFG CFE80430, 003C (r1 102811 OEMMCFG 20111028 MSFT 97) > (XEN) ACPI: OEMB CFE98040, 0072 (r1 102811 OEMB1740 20111028 MSFT 97) > (XEN) ACPI: HPET CFE8F8C0, 0038 (r1 102811 OEMHPET 20111028 MSFT 97) > (XEN) ACPI: IVRS CFE8F900, 00E0 (r1 AMD RD890S 202031 AMD 0) > (XEN) ACPI: SSDT CFE8F9E0, 0E10 (r1 A M I POWERNOW 1 AMD 1) > (XEN) System RAM: 8190MB (8386664kB) > (XEN) No NUMA configuration found > (XEN) Faking a node at 0000000000000000-0000000230000000 > (XEN) Domain heap initialised > (XEN) found SMP MP-table at 000ff780 > (XEN) DMI present. > (XEN) Using APIC driver default > (XEN) ACPI: PM-Timer IO Port: 0x808 > (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[804,0], pm1x_evt[800,0] > (XEN) ACPI: wakeup_vec[cfe9800c], vec_size[20] > (XEN) ACPI: Local APIC address 0xfee00000 > (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > (XEN) Processor #0 0:10 APIC version 16 > (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) > (XEN) Processor #1 0:10 APIC version 16 > (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) > (XEN) Processor #2 0:10 APIC version 16 > (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) > (XEN) Processor #3 0:10 APIC version 16 > (XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled) > (XEN) Processor #4 0:10 APIC version 16 > (XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) > (XEN) Processor #5 0:10 APIC version 16 > (XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled) > (XEN) ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0]) > (XEN) IOAPIC[0]: apic_id 6, version 33, address 0xfec00000, GSI 0-23 > (XEN) ACPI: IOAPIC (id[0x07] address[0xfec20000] gsi_base[24]) > (XEN) IOAPIC[1]: apic_id 7, version 33, address 0xfec20000, GSI 24-55 > (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) > (XEN) ACPI: IRQ0 used by override. > (XEN) ACPI: IRQ2 used by override. > (XEN) ACPI: IRQ9 used by override. > (XEN) Enabling APIC mode: Flat. Using 2 I/O APICs > (XEN) ACPI: HPET id: 0x8300 base: 0xfed00000 > (XEN) Table is not found! > (XEN) Using ACPI (MADT) for SMP configuration information > (XEN) SMP: Allowing 8 CPUs (2 hotplug CPUs) > (XEN) IRQ limits: 56 GSI, 1112 MSI/MSI-X > (XEN) Using scheduler: SMP Credit Scheduler (credit) > (XEN) Detected 3010.238 MHz processor. > (XEN) Initing memory sharing. > (XEN) AMD Fam10h machine check reporting enabled > (XEN) PCI: MCFG configuration 0: base e0000000 segment 0000 buses 00 - ff > (XEN) PCI: Not using MCFG for segment 0000 bus 00-ff > (XEN) AMD-Vi: IOMMU 0 Enabled. > (XEN) AMD-Vi: Enabling global vector map > (XEN) I/O virtualisation enabled > (XEN) - Dom0 mode: Relaxed > (XEN) ENABLING IO-APIC IRQs > (XEN) -> Using new ACK method > (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1 > (XEN) Platform timer is 14.318MHz HPET > (XEN) Allocated console ring of 64 KiB. > (XEN) HVM: ASIDs enabled. > (XEN) SVM: Supported advanced features: > (XEN) - Nested Page Tables (NPT) > (XEN) - Last Branch Record (LBR) Virtualisation > (XEN) - Next-RIP Saved on #VMEXIT > (XEN) - Pause-Intercept Filter > (XEN) HVM: SVM enabled > (XEN) HVM: Hardware Assisted Paging (HAP) detected > (XEN) HVM: HAP page sizes: 4kB, 2MB, 1GB > (XEN) microcode: collect_cpu_info: patch_id=0x10000bf > (XEN) microcode: collect_cpu_info: patch_id=0x10000bf > (XEN) microcode: collect_cpu_info: patch_id=0x10000bf > (XEN) microcode: collect_cpu_info: patch_id=0x10000bf > (XEN) Brought up 6 CPUs > (XEN) microcode: collect_cpu_info: patch_id=0x10000bf > (XEN) HPET's MSI mode hasn't been supported when Interrupt Remapping is > enabled. > (XEN) ACPI sleep modes: S3 > (XEN) MCA: Use hw thresholding to adjust polling frequency > (XEN) mcheck_poll: Machine check polling timer started. > (XEN) Xenoprofile: Failed to setup IBS LVT offset, IBSCTL = 0xffffffff > (XEN) *** LOADING DOMAIN 0 *** > (XEN) elf_parse_binary: phdr: paddr=0x1000000 memsz=0x5d3000 > (XEN) elf_parse_binary: phdr: paddr=0x15d3000 memsz=0x6e0e8 > (XEN) elf_parse_binary: phdr: paddr=0x1642000 memsz=0x12980 > (XEN) elf_parse_binary: phdr: paddr=0x1655000 memsz=0x4ff000 > (XEN) elf_parse_binary: memory: 0x1000000 -> 0x1b54000 > (XEN) elf_xen_parse_note: GUEST_OS = "linux" > (XEN) elf_xen_parse_note: GUEST_VERSION = "2.6" > (XEN) elf_xen_parse_note: XEN_VERSION = "xen-3.0" > (XEN) elf_xen_parse_note: VIRT_BASE = 0xffffffff80000000 > (XEN) elf_xen_parse_note: ENTRY = 0xffffffff81655200 > (XEN) elf_xen_parse_note: HYPERCALL_PAGE = 0xffffffff81001000 > (XEN) elf_xen_parse_note: FEATURES = > "!writable_page_tables|pae_pgdir_above_4gb" > (XEN) elf_xen_parse_note: PAE_MODE = "yes" > (XEN) elf_xen_parse_note: LOADER = "generic" > (XEN) elf_xen_parse_note: unknown xen elf note (0xd) > (XEN) elf_xen_parse_note: SUSPEND_CANCEL = 0x1 > (XEN) elf_xen_parse_note: HV_START_LOW = 0xffff800000000000 > (XEN) elf_xen_parse_note: PADDR_OFFSET = 0x0 > (XEN) elf_xen_addr_calc_check: addresses: > (XEN) virt_base = 0xffffffff80000000 > (XEN) elf_paddr_offset = 0x0 > (XEN) virt_offset = 0xffffffff80000000 > (XEN) virt_kstart = 0xffffffff81000000 > (XEN) virt_kend = 0xffffffff81b54000 > (XEN) virt_entry = 0xffffffff81655200 > (XEN) p2m_base = 0xffffffffffffffff > (XEN) Xen kernel: 64-bit, lsb, compat32 > (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x1b54000 > (XEN) PHYSICAL MEMORY ARRANGEMENT: > (XEN) Dom0 alloc.: 0000000224000000->0000000228000000 (506308 pages to be > allocated) > (XEN) Init. ramdisk: 000000022f9c4000->000000022ffff200 > (XEN) VIRTUAL MEMORY ARRANGEMENT: > (XEN) Loaded kernel: ffffffff81000000->ffffffff81b54000 > (XEN) Init. ramdisk: ffffffff81b54000->ffffffff8218f200 > (XEN) Phys-Mach map: ffffffff82190000->ffffffff82590000 > (XEN) Start info: ffffffff82590000->ffffffff825904b4 > (XEN) Page tables: ffffffff82591000->ffffffff825a8000 > (XEN) Boot stack: ffffffff825a8000->ffffffff825a9000 > (XEN) TOTAL: ffffffff80000000->ffffffff82800000 > (XEN) ENTRY ADDRESS: ffffffff81655200 > (XEN) Dom0 has maximum 6 VCPUs > (XEN) elf_load_binary: phdr 0 at 0xffffffff81000000 -> 0xffffffff815d3000 > (XEN) elf_load_binary: phdr 1 at 0xffffffff815d3000 -> 0xffffffff816410e8 > (XEN) elf_load_binary: phdr 2 at 0xffffffff81642000 -> 0xffffffff81654980 > (XEN) elf_load_binary: phdr 3 at 0xffffffff81655000 -> 0xffffffff816cc000 > (XEN) Scrubbing Free RAM: > .............................................................done. > (XEN) Initial low memory virq threshold set at 0x4000 pages. > (XEN) Std. Loglevel: All > (XEN) Guest Loglevel: All > (XEN) ********************************************** > (XEN) ******* WARNING: CONSOLE OUTPUT IS SYNCHRONOUS > (XEN) ******* This option is intended to aid debugging of Xen by ensuring > (XEN) ******* that all output is synchronously delivered on the serial line. > (XEN) ******* However it can introduce SIGNIFICANT latencies and affect > (XEN) ******* timekeeping. It is NOT recommended for production use! > (XEN) ********************************************** > (XEN) 3... 2... 1... > (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to > Xen) > (XEN) Freed 256kB init memory. > mapping kernel into physical memory > Xen: setup ISA identity maps > about to get started... > Initializing cgroup subsys cpuset > Initializing cgroup subsys cpu > Linux version 3.4.0-rc4-00395-g87b5d90-dirty (root@xen) (gcc version 4.4.5 > (Debian 4.4.5-8) ) #5 SMP PREEMPT Sat May 5 19:29:42 CEST 2012 > Command line: placeholder root=/dev/mapper/lemrouch-xen ro mem=2G panic=15 > xen-pciback.hide=(00:14.2) console=hvc0 earlyprintk=xen > Freeing 9a-100 pfn range: 102 pages freed > Released 102 pages of unused memory > Set 197094 page(s) to 1-1 mapping > Populating 80000-80066 pfn range: 102 pages added > BIOS-provided physical RAM map: > Xen: 0000000000000000 - 000000000009a000 (usable) > Xen: 000000000009ac00 - 0000000000100000 (reserved) > Xen: 0000000000100000 - 0000000080066000 (usable) > Xen: 0000000080066000 - 00000000cfe80000 (unusable) > Xen: 00000000cfe80000 - 00000000cfe98000 (ACPI data) > Xen: 00000000cfe98000 - 00000000cfec0000 (ACPI NVS) > Xen: 00000000cfec0000 - 00000000cff00000 (reserved) > Xen: 00000000fec00000 - 00000000fec01000 (reserved) > Xen: 00000000fec20000 - 00000000fec21000 (reserved) > Xen: 00000000fee00000 - 00000000fee01000 (reserved) > Xen: 00000000ffe00000 - 0000000100000000 (reserved) > Xen: 0000000100000000 - 0000000230000000 (unusable) > bootconsole [xenboot0] enabled > NX (Execute Disable) protection: active > user-defined physical RAM map: > user: 0000000000000000 - 000000000009a000 (usable) > user: 000000000009ac00 - 0000000000100000 (reserved) > user: 0000000000100000 - 0000000080000000 (usable) > user: 0000000080066000 - 00000000cfe80000 (unusable) > user: 00000000cfe80000 - 00000000cfe98000 (ACPI data) > user: 00000000cfe98000 - 00000000cfec0000 (ACPI NVS) > user: 00000000cfec0000 - 00000000cff00000 (reserved) > user: 00000000fec00000 - 00000000fec01000 (reserved) > user: 00000000fec20000 - 00000000fec21000 (reserved) > user: 00000000fee00000 - 00000000fee01000 (reserved) > user: 00000000ffe00000 - 0000000100000000 (reserved) > user: 0000000100000000 - 0000000230000000 (unusable) > DMI present. > No AGP bridge found > last_pfn = 0x80000 max_arch_pfn = 0x400000000 > found SMP MP-table at [ffff8800000ff780] ff780 > init_memory_mapping: 0000000000000000-0000000080000000 > RAMDISK: 01b54000 - 02190000 > ACPI: RSDP 00000000000fbf20 00024 (v02 ACPIAM) > ACPI: XSDT 00000000cfe80100 0005C (v01 102811 XSDT1740 20111028 MSFT 00000097) > ACPI: FACP 00000000cfe80290 000F4 (v03 102811 FACP1740 20111028 MSFT 00000097) > ACPI: DSDT 00000000cfe80470 0E6E3 (v01 A1595 A1595000 00000000 INTL 20060113) > ACPI: FACS 00000000cfe98000 00040 > ACPI: APIC 00000000cfe80390 00098 (v01 102811 APIC1740 20111028 MSFT 00000097) > ACPI: MCFG 00000000cfe80430 0003C (v01 102811 OEMMCFG 20111028 MSFT 00000097) > ACPI: OEMB 00000000cfe98040 00072 (v01 102811 OEMB1740 20111028 MSFT 00000097) > ACPI: HPET 00000000cfe8f8c0 00038 (v01 102811 OEMHPET 20111028 MSFT 00000097) > ACPI: IVRS 00000000cfe8f900 000E0 (v01 AMD RD890S 00202031 AMD 00000000) > ACPI: SSDT 00000000cfe8f9e0 00E10 (v01 A M I POWERNOW 00000001 AMD 00000001) > No NUMA configuration found > Faking a node at 0000000000000000-0000000080000000 > Initmem setup node 0 0000000000000000-0000000080000000 > NODE_DATA [000000007fffc000 - 000000007fffffff] > Zone PFN ranges: > DMA 0x00000010 -> 0x00001000 > DMA32 0x00001000 -> 0x00100000 > Normal empty > Movable zone start PFN for each node > Early memory PFN ranges > 0: 0x00000010 -> 0x0000009a > 0: 0x00000100 -> 0x00080000 > ACPI: PM-Timer IO Port: 0x808 > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > BIOS bug: APIC version is 0 for CPU 0/0x0, fixing up to 0x10 > ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) > ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) > ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) > ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled) > ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) > ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled) > ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled) > ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0]) > IOAPIC[0]: apic_id 6, version 253, address 0xfec00000, GSI 0-253 > ACPI: IOAPIC (id[0x07] address[0xfec20000] gsi_base[24]) > IOAPIC[1]: apic_id 7, version 253, address 0xfec20000, GSI 24-277 > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) > Using ACPI (MADT) for SMP configuration information > ACPI: HPET id: 0x8300 base: 0xfed00000 > 8 Processors exceeds NR_CPUS limit of 6 > SMP: Allowing 6 CPUs, 0 hotplug CPUs > Allocating PCI resources starting at cff00000 (gap: cff00000:2ed00000) > Booting paravirtualized kernel on Xen > Xen version: 4.2-unstable (preserve-AD) > setup_percpu: NR_CPUS:6 nr_cpumask_bits:6 nr_cpu_ids:6 nr_node_ids:1 > PERCPU: Embedded 26 pages/cpu @ffff88007ff4c000 s76160 r8192 d22144 u106496 > Built 1 zonelists in Node order, mobility grouping on. Total pages: 515976 > Policy zone: DMA32 > Kernel command line: placeholder root=/dev/mapper/lemrouch-xen ro mem=2G > panic=15 xen-pciback.hide=(00:14.2) console=hvc0 earlyprintk=xen > PID hash table entries: 4096 (order: 3, 32768 bytes) > Placing 64MB software IO TLB between ffff880079600000 - ffff88007d600000 > software IO TLB at phys 0x79600000 - 0x7d600000 > Memory: 1975064k/2097152k available (4567k kernel code, 472k absent, 121616k > reserved, 1833k data, 532k init) > SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 > Preemptible hierarchical RCU implementation. > Dump stacks of tasks blocking RCU-preempt GP. > NR_IRQS:4352 nr_irqs:1536 16 > xen: sci override: global_irq=9 trigger=0 polarity=1 > xen: acpi sci 9 > xen_map_pirq_gsi: returning irq 9 for gsi 9 > Console: colour VGA+ 80x25 > console [hvc0] enabled, bootconsole disabled > console [hvc0] enabled, bootconsole disabled > installing Xen timer for CPU 0 > Detected 3010.238 MHz processor. > Calibrating delay loop (skipped), value calculated using timer frequency.. > 6020.47 BogoMIPS (lpj=3010238) > pid_max: default: 32768 minimum: 301 > Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) > Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) > Mount-cache hash table entries: 256 > Initializing cgroup subsys devices > Initializing cgroup subsys freezer > Initializing cgroup subsys blkio > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 0 > mce: CPU supports 6 MCE banks > ACPI: Core revision 20120320 > cpu 0 spinlock event irq 295 > Performance Events: (XEN) traps.c:2561:d0 Domain attempted WRMSR > 00000000c0010004 from 0x0000e4a75df86514 to 0x000000000000abcd. > Broken PMU hardware detected, using software events only. > MCE: In-kernel MCE decoding enabled. > installing Xen timer for CPU 1 > cpu 1 spinlock event irq 302 > installing Xen timer for CPU 2 > cpu 2 spinlock event irq 309 > installing Xen timer for CPU 3 > cpu 3 spinlock event irq 316 > installing Xen timer for CPU 4 > cpu 4 spinlock event irq 323 > installing Xen timer for CPU 5 > cpu 5 spinlock event irq 330 > Brought up 6 CPUs > devtmpfs: initialized > Grant tables using version 2 layout. > Grant table initialized > NET: Registered protocol family 16 > TOM: 00000000d0000000 aka 3328M > TOM2: 0000000230000000 aka 8960M > ACPI: bus type pci registered > PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] > (base 0xe0000000) > PCI: not using MMCONFIG > PCI: Using configuration type 1 for base access > PCI: Using configuration type 1 for extended access > bio: create slab <bio-0> at 0 > ACPI: Added _OSI(Module Device) > ACPI: Added _OSI(Processor Device) > ACPI: Added _OSI(3.0 _SCP Extensions) > ACPI: Added _OSI(Processor Aggregator Device) > ACPI: Executed 3 blocks of module-level executable AML code > ACPI: Interpreter enabled > ACPI: (supports S0 S5) > ACPI: Using IOAPIC for interrupt routing > PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] > (base 0xe0000000) > PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard > resources > ACPI: EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62 > PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and > report a bug > ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) > pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] > pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] > pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] > pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] > pci_root PNP0A03:00: host bridge window [mem 0xcff00000-0xdfffffff] > pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff] > PCI host bridge to bus 0000:00 > pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] > pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] > pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] > pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff] > pci_bus 0000:00: root bus resource [mem 0xcff00000-0xdfffffff] > pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff] > pci 0000:00:02.0: PCI bridge to [bus 07-07] > pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it > with 'pcie_aspm=force' > pci 0000:00:04.0: PCI bridge to [bus 06-06] > pci 0000:00:05.0: PCI bridge to [bus 05-05] > pci 0000:00:06.0: PCI bridge to [bus 04-04] > pci 0000:00:07.0: PCI bridge to [bus 03-03] > pci 0000:00:0d.0: PCI bridge to [bus 02-02] > pci 0000:00:14.4: PCI bridge to [bus 01-01] (subtractive decode) > pci0000:00: Requesting ACPI _OSC control (0x1d) > pci0000:00: ACPI _OSC control (0x1c) granted > (XEN) PCI add device 0000:00:00.0 > (XEN) PCI add device 0000:00:00.2 > (XEN) PCI add device 0000:00:02.0 > (XEN) PCI add device 0000:00:04.0 > (XEN) PCI add device 0000:00:05.0 > (XEN) PCI add device 0000:00:06.0 > (XEN) PCI add device 0000:00:07.0 > (XEN) PCI add device 0000:00:0d.0 > (XEN) PCI add device 0000:00:11.0 > (XEN) PCI add device 0000:00:12.0 > (XEN) PCI add device 0000:00:12.2 > (XEN) PCI add device 0000:00:13.0 > (XEN) PCI add device 0000:00:13.2 > (XEN) PCI add device 0000:00:14.0 > (XEN) PCI add device 0000:00:14.2 > (XEN) PCI add device 0000:00:14.3 > (XEN) PCI add device 0000:00:14.4 > (XEN) PCI add device 0000:00:14.5 > (XEN) PCI add device 0000:00:16.0 > (XEN) PCI add device 0000:00:16.2 > (XEN) PCI add device 0000:00:18.0 > (XEN) PCI add device 0000:00:18.1 > (XEN) PCI add device 0000:00:18.2 > (XEN) PCI add device 0000:00:18.3 > (XEN) PCI add device 0000:00:18.4 > (XEN) PCI add device 0000:07:00.0 > (XEN) PCI add device 0000:07:00.1 > (XEN) PCI add device 0000:06:00.0 > (XEN) PCI add device 0000:06:00.1 > pci 0000:06:00.1: Failed to add - passthrough or MSI/MSI-X might fail! > (XEN) PCI add device 0000:05:00.0 > (XEN) PCI add device 0000:04:00.0 > (XEN) PCI add device 0000:03:00.0 > (XEN) PCI add device 0000:02:00.0 > (XEN) PCI add device 0000:02:00.1 > ACPI: PCI Interrupt Link [LNKA] (IRQs *4 7 10 11 14 15) > ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 *10 11 14 15) > ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 *11 14 15) > ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 14 15) > ACPI: PCI Interrupt Link [LNKE] (IRQs 4 *7 10 11 14 15) > ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 *11 14 15) > ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 *10 11 14 15) > ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0, disabled. > xen/balloon: Initialising balloon driver. > xen-balloon: Initialising balloon driver. > vgaarb: device added: PCI:0000:07:00.0,decodes=io+mem,owns=io+mem,locks=none > vgaarb: loaded > vgaarb: bridge control possible 0000:07:00.0 > SCSI subsystem initialized > usbcore: registered new interface driver usbfs > usbcore: registered new interface driver hub > usbcore: registered new device driver usb > PCI: Using ACPI for IRQ routing > Switching to clocksource xen > FS-Cache: Loaded > CacheFiles: Loaded > pnp: PnP ACPI init > ACPI: bus type pnp registered > system 00:01: [mem 0xfec20000-0xfec200ff] could not be reserved > system 00:02: [mem 0xf6000000-0xf6003fff] has been reserved > xen_map_pirq_gsi: returning irq 8 for gsi 8 > xen_map_pirq_gsi: returning irq 13 for gsi 13 > system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved > system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved > system 00:09: [io 0x04d0-0x04d1] has been reserved > system 00:09: [io 0x040b] has been reserved > system 00:09: [io 0x04d6] has been reserved > system 00:09: [io 0x0c00-0x0c01] has been reserved > system 00:09: [io 0x0c14] has been reserved > system 00:09: [io 0x0c50-0x0c51] has been reserved > system 00:09: [io 0x0c52] has been reserved > system 00:09: [io 0x0c6c] has been reserved > system 00:09: [io 0x0c6f] has been reserved > system 00:09: [io 0x0cd0-0x0cd1] has been reserved > system 00:09: [io 0x0cd2-0x0cd3] has been reserved > system 00:09: [io 0x0cd4-0x0cd5] has been reserved > system 00:09: [io 0x0cd6-0x0cd7] has been reserved > system 00:09: [io 0x0cd8-0x0cdf] has been reserved > system 00:09: [io 0x0800-0x089f] has been reserved > system 00:09: [io 0x0b00-0x0b1f] has been reserved > system 00:09: [io 0x0b20-0x0b3f] has been reserved > system 00:09: [io 0x0900-0x090f] has been reserved > system 00:09: [io 0x0910-0x091f] has been reserved > system 00:09: [io 0xfe00-0xfefe] has been reserved > system 00:09: [mem 0xcff00000-0xcfffffff] has been reserved > system 00:09: [mem 0xffb80000-0xffbfffff] has been reserved > system 00:09: [mem 0xfec10000-0xfec1001f] has been reserved > system 00:09: [mem 0xfed80000-0xfed80fff] has been reserved > system 00:0a: [io 0x0230-0x023f] has been reserved > system 00:0a: [io 0x0290-0x029f] has been reserved > system 00:0a: [io 0x0f40-0x0f4f] has been reserved > system 00:0a: [io 0x0a30-0x0a3f] has been reserved > system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved > system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved > system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved > system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved > system 00:0c: [mem 0x00100000-0xcfefffff] could not be reserved > system 00:0c: [mem 0xfec00000-0xffffffff] could not be reserved > pnp: PnP ACPI: found 13 devices > ACPI: ACPI bus type pnp unregistered > pciback 0000:00:14.2: seizing device > PM-Timer failed consistency check (0x0xffffff) - aborting. > pci 0000:00:02.0: PCI bridge to [bus 07-07] > pci 0000:00:02.0: bridge window [io 0xe000-0xefff] > pci 0000:00:02.0: bridge window [mem 0xfe900000-0xfe9fffff] > pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] > pci 0000:00:04.0: PCI bridge to [bus 06-06] > pci 0000:00:04.0: bridge window [io 0xd000-0xdfff] > pci 0000:00:04.0: bridge window [mem 0xfe800000-0xfe8fffff] > pci 0000:00:05.0: PCI bridge to [bus 05-05] > pci 0000:00:05.0: bridge window [io 0xc000-0xcfff] > pci 0000:00:05.0: bridge window [mem 0xfe700000-0xfe7fffff] > pci 0000:00:06.0: PCI bridge to [bus 04-04] > pci 0000:00:06.0: bridge window [io 0xb000-0xbfff] > pci 0000:00:06.0: bridge window [mem 0xfe600000-0xfe6fffff] > pci 0000:00:07.0: PCI bridge to [bus 03-03] > pci 0000:00:07.0: bridge window [mem 0xfe500000-0xfe5fffff] > pci 0000:00:0d.0: PCI bridge to [bus 02-02] > pci 0000:00:0d.0: bridge window [io 0xa000-0xafff] > pci 0000:00:0d.0: bridge window [mem 0xfe400000-0xfe4fffff] > pci 0000:00:14.4: PCI bridge to [bus 01-01] > xen_map_pirq_gsi: returning irq 52 for gsi 52 > Already setup the GSI :52 > xen_map_pirq_gsi: returning irq 52 for gsi 52 > Already setup the GSI :52 > xen_map_pirq_gsi: returning irq 53 for gsi 53 > Already setup the GSI :53 > NET: Registered protocol family 2 > IP route cache hash table entries: 65536 (order: 7, 524288 bytes) > TCP established hash table entries: 262144 (order: 10, 4194304 bytes) > TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) > TCP: Hash tables configured (established 262144 bind 65536) > TCP: reno registered > UDP hash table entries: 1024 (order: 3, 32768 bytes) > UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) > NET: Registered protocol family 1 > xen_map_pirq_gsi: returning irq 18 for gsi 18 > Already setup the GSI :18 > xen_map_pirq_gsi: returning irq 17 for gsi 17 > Already setup the GSI :17 > xen_map_pirq_gsi: returning irq 18 for gsi 18 > Already setup the GSI :18 > xen_map_pirq_gsi: returning irq 18 for gsi 18 > Already setup the GSI :18 > xen_map_pirq_gsi: returning irq 17 for gsi 17 > Already setup the GSI :17 > Unpacking initramfs... > Freeing initrd memory: 6384k freed > microcode: CPU0: patch_level=0x010000bf > microcode: CPU1: patch_level=0x010000bf > microcode: CPU2: patch_level=0x010000bf > microcode: CPU3: patch_level=0x010000bf > microcode: CPU4: patch_level=0x010000bf > microcode: CPU5: patch_level=0x010000bf > microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, > Peter Oruba > NTFS driver 2.1.30 [Flags: R/W]. > msgmni has been set to 3870 > Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) > io scheduler noop registered (default) > pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt > pci 0000:07:00.0: Signaling PME through PCIe PME interrupt > pci 0000:07:00.1: Signaling PME through PCIe PME interrupt > pcieport 0000:00:04.0: Signaling PME through PCIe PME interrupt > pci 0000:06:00.0: Signaling PME through PCIe PME interrupt > pci 0000:06:00.1: Signaling PME through PCIe PME interrupt > pcieport 0000:00:05.0: Signaling PME through PCIe PME interrupt > pci 0000:05:00.0: Signaling PME through PCIe PME interrupt > pcieport 0000:00:06.0: Signaling PME through PCIe PME interrupt > pci 0000:04:00.0: Signaling PME through PCIe PME interrupt > pcieport 0000:00:07.0: Signaling PME through PCIe PME interrupt > pci 0000:03:00.0: Signaling PME through PCIe PME interrupt > pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt > pci 0000:02:00.0: Signaling PME through PCIe PME interrupt > pci 0000:02:00.1: Signaling PME through PCIe PME interrupt > pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 > ACPI: Power Button [PWRB] > input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 > ACPI: Power Button [PWRF] > GHES: HEST is not enabled! > Event-channel device installed. > xen-pciback: backend is vpci > Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled > 0000:02:00.1: ttyS0 at I/O 0xa880 (irq = 41) is a ST16650V2 > hpet_acpi_add: no address or irqs in _CRS > Non-volatile memory driver v1.3 > Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 > seconds). > Hangcheck: Using getrawmonotonic(). > loop: module loaded > ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode > ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part > scsi0 : ahci > scsi1 : ahci > scsi2 : ahci > scsi3 : ahci > scsi4 : ahci > scsi5 : ahci > ata2: SATA max UDMA/133 abar m1024@0xfe3fe000 port 0xfe3fe100 irq 19 > ata3: SATA max UDMA/133 abar m1024@0xfe3fe000 port 0xfe3fe180 irq 19 > ata4: SATA max UDMA/133 abar m1024@0xfe3fe000 port 0xfe3fe200 irq 19 > ata5: SATA max UDMA/133 abar m1024@0xfe3fe000 port 0xfe3fe280 irq 19 > ata6: SATA max UDMA/133 abar m1024@0xfe3fe000 port 0xfe3fe300 irq 19 > ata7: SATA max UDMA/133 abar m1024@0xfe3fe000 port 0xfe3fe380 irq 19 > ahci 0000:06:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode > ahci 0000:06:00.0: flags: 64bit ncq pm led clo pmp pio slum part > scsi6 : ahci > scsi7 : ahci > ata8: SATA max UDMA/133 abar m8192@0xfe8fe000 port 0xfe8fe100 irq 44 > ata9: SATA max UDMA/133 abar m8192@0xfe8fe000 port 0xfe8fe180 irq 44 > tun: Universal TUN/TAP device driver, 1.6 > tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx> > sky2: driver version 1.30 > sky2 0000:04:00.0: Yukon-2 Optima chip revision 1 > sky2 0000:04:00.0: eth0: addr 20:cf:30:6d:89:a5 > usbcore: registered new interface driver cdc_ncm > firewire_ohci 0000:05:00.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT > contexts, quirks 0x11 > ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver > xen_map_pirq_gsi: returning irq 17 for gsi 17 > Already setup the GSI :17 > ehci_hcd 0000:00:12.2: EHCI Host Controller > ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 > ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh > workaround > ehci_hcd 0000:00:12.2: debug port 1 > ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe3fe400 > ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 > usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 > usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb1: Product: EHCI Host Controller > usb usb1: Manufacturer: Linux 3.4.0-rc4-00395-g87b5d90-dirty ehci_hcd > usb usb1: SerialNumber: 0000:00:12.2 > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 5 ports detected > xen_map_pirq_gsi: returning irq 17 for gsi 17 > Already setup the GSI :17 > ehci_hcd 0000:00:13.2: EHCI Host Controller > ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 > ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh > workaround > ehci_hcd 0000:00:13.2: debug port 1 > ehci_hcd 0000:00:13.2: irq 17, io mem 0xfe3fe800 > ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 > usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 > usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb2: Product: EHCI Host Controller > usb usb2: Manufacturer: Linux 3.4.0-rc4-00395-g87b5d90-dirty ehci_hcd > usb usb2: SerialNumber: 0000:00:13.2 > hub 2-0:1.0: USB hub found > hub 2-0:1.0: 5 ports detected > xen_map_pirq_gsi: returning irq 17 for gsi 17 > Already setup the GSI :17 > ehci_hcd 0000:00:16.2: EHCI Host Controller > ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3 > ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh > workaround > ehci_hcd 0000:00:16.2: debug port 1 > ata7: SATA link down (SStatus 0 SControl 300) > ata6: SATA link down (SStatus 0 SControl 300) > ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > ata5: SATA link down (SStatus 0 SControl 300) > ata4: SATA link down (SStatus 0 SControl 300) > ata3: SATA link down (SStatus 0 SControl 300) > ata2.00: ATA-8: INTEL SSDSA2CW120G3, 4PC10362, max UDMA/133 > ehci_hcd 0000:00:16.2: irq 17, io mem 0xfe3fec00 > ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00 > usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 > usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb3: Product: EHCI Host Controller > usb usb3: Manufacturer: Linux 3.4.0-rc4-00395-g87b5d90-dirty ehci_hcd > usb usb3: SerialNumber: 0000:00:16.2 > ata9: SATA link down (SStatus 0 SControl 300) > ata8: SATA link down (SStatus 0 SControl 300) > ata2.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32) > hub 3-0:1.0: USB hub found > hub 3-0:1.0: 4 ports detected > ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver > ata2.00: configured for UDMA/133 > xen_map_pirq_gsi: returning irq 18 for gsi 18 > Already setup the GSI :18 > ohci_hcd 0000:00:12.0: OHCI Host Controller > ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4 > ohci_hcd 0000:00:12.0: irq 18, io mem 0xfe3f7000 > scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA2CW12 4PC1 PQ: 0 ANSI: 5 > sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB) > sd 0:0:0:0: [sda] Write Protect is off > sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support > DPO or FUA > sda: sda1 sda2 > sd 0:0:0:0: [sda] Attached SCSI disk > usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb4: Product: OHCI Host Controller > usb usb4: Manufacturer: Linux 3.4.0-rc4-00395-g87b5d90-dirty ohci_hcd > usb usb4: SerialNumber: 0000:00:12.0 > hub 4-0:1.0: USB hub found > hub 4-0:1.0: 5 ports detected > xen_map_pirq_gsi: returning irq 18 for gsi 18 > Already setup the GSI :18 > ohci_hcd 0000:00:13.0: OHCI Host Controller > ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 > ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe3fc000 > usb 1-1: new high-speed USB device number 2 using ehci_hcd > usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb5: Product: OHCI Host Controller > usb usb5: Manufacturer: Linux 3.4.0-rc4-00395-g87b5d90-dirty ohci_hcd > usb usb5: SerialNumber: 0000:00:13.0 > hub 5-0:1.0: USB hub found > hub 5-0:1.0: 5 ports detected > xen_map_pirq_gsi: returning irq 18 for gsi 18 > Already setup the GSI :18 > ohci_hcd 0000:00:14.5: OHCI Host Controller > firewire_core 0000:05:00.0: created device fw0: GUID 001e8c0000de9136, S400 > ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6 > ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe3fd000 > usb 1-1: New USB device found, idVendor=0424, idProduct=2504 > usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 > hub 1-1:1.0: USB hub found > hub 1-1:1.0: 4 ports detected > usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb6: Product: OHCI Host Controller > usb usb6: Manufacturer: Linux 3.4.0-rc4-00395-g87b5d90-dirty ohci_hcd > usb usb6: SerialNumber: 0000:00:14.5 > hub 6-0:1.0: USB hub found > hub 6-0:1.0: 2 ports detected > xen_map_pirq_gsi: returning irq 18 for gsi 18 > Already setup the GSI :18 > ohci_hcd 0000:00:16.0: OHCI Host Controller > ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7 > ohci_hcd 0000:00:16.0: irq 18, io mem 0xfe3ff000 > usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb7: Product: OHCI Host Controller > usb usb7: Manufacturer: Linux 3.4.0-rc4-00395-g87b5d90-dirty ohci_hcd > usb usb7: SerialNumber: 0000:00:16.0 > hub 7-0:1.0: USB hub found > hub 7-0:1.0: 4 ports detected > xen_map_pirq_gsi: returning irq 50 for gsi 50 > Already setup the GSI :50 > xhci_hcd 0000:03:00.0: xHCI Host Controller > xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 8 > xhci_hcd 0000:03:00.0: irq 50, io mem 0xfe5fe000 > usb usb8: New USB device found, idVendor=1d6b, idProduct=0002 > usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb8: Product: xHCI Host Controller > usb usb8: Manufacturer: Linux 3.4.0-rc4-00395-g87b5d90-dirty xhci_hcd > usb usb8: SerialNumber: 0000:03:00.0 > hub 8-0:1.0: USB hub found > hub 8-0:1.0: 2 ports detected > xhci_hcd 0000:03:00.0: xHCI Host Controller > xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 9 > usb usb9: New USB device found, idVendor=1d6b, idProduct=0003 > usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb9: Product: xHCI Host Controller > usb usb9: Manufacturer: Linux 3.4.0-rc4-00395-g87b5d90-dirty xhci_hcd > usb usb9: SerialNumber: 0000:03:00.0 > hub 9-0:1.0: USB hub found > hub 9-0:1.0: 2 ports detected > usbcore: registered new interface driver usblp > usbcore: registered new interface driver uas > Initializing USB Mass Storage driver... > usbcore: registered new interface driver usb-storage > USB Mass Storage support registered. > usbcore: registered new interface driver libusual > usbcore: registered new interface driver ums_eneub6250 > i8042: PNP: No PS/2 controller found. Probing ports directly. > serio: i8042 KBD port at 0x60,0x64 irq 1 > serio: i8042 AUX port at 0x60,0x64 irq 12 > mousedev: PS/2 mouse device common for all mice > input: PC Speaker as /devices/platform/pcspkr/input/input2 > rtc_cmos 00:04: RTC can wake from S4 > rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 > rtc0: alarms up to one month, y3k, 114 bytes nvram > i2c /dev entries driver > ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with > Region \_SB_.PCI0.SBRG.ASOC.SMRG 1 (20120320/utaddress-251) > usb 4-2: new full-speed USB device number 2 using ohci_hcd > ACPI: If an ACPI driver is available for this device, you should use it > instead of the native driver > ATK0110 ATK0110:00: EC enabled > sp5100_tco: SP5100 TCO WatchDog Timer Driver v0.01 > sp5100_tco: mmio address 0xb8fe00 already in use > it87_wdt: Chip IT8721 revision 1 initialized. timeout=60 sec (nowayout=0 > testmode=0 exclusive=1 nogameport=0) > xen_wdt: Xen WatchDog Timer Driver v0.01 > xen_wdt: cannot register miscdev on minor=130 (-16) > wdt: probe of wdt failed with error -16 > device-mapper: uevent: version 1.0.3 > device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: > dm-devel@xxxxxxxxxx > EDAC MC: Ver: 2.1.0 > AMD64 EDAC driver v3.4.0 > EDAC amd64: DRAM ECC disabled. > EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not > load. > Either enable ECC checking or force module loading by setting > 'ecc_enable_override'. > (Note that use of the override may cause unknown side effects.) > usbcore: registered new interface driver usbhid > usbhid: USB HID core driver > TCP: cubic registered > NET: Registered protocol family 17 > rtc_cmos 00:04: setting system clock to 2012-05-07 10:55:22 UTC (1336388122) > powernow-k8: Found 1 AMD Phenom(tm) II X6 1075T Processor (6 cpu cores) > (version 2.20.00) > powernow-k8: Core Performance Boosting: on. > Freeing unused kernel memory: 532k freed > Loading, please wait... > udev[1078]: starting version 164 > usb 4-2: New USB device found, idVendor=041e, idProduct=30dc > usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 > usb 4-2: Product: Sound Blaster Tactic(3D) Alpha > usb 4-2: Manufacturer: Creative Technology Ltd > usb 4-2: SerialNumber: 00023162 > input: Creative Technology Ltd Sound Blaster Tactic(3D) Alpha as > /devices/pci0000:00/0000:00:12.0/usb4/4-2/4-2:1.3/input/input3 > generic-usb 0003:041E:30DC.0001: input,hiddev0: USB HID v1.00 Device > [Creative Technology Ltd Sound Blaster Tactic(3D) Alpha] on > usb-0000:00:12.0-2/input3 > Begin: Loading essential drivers ... usb 1-1.1: new full-speed USB device > number 4 using ehci_hcd > done. > Begin: Running /scripts/init-premount ... done. > Begin: Mounting root file system ... Begin: Running /scripts/local-top ... > usb 1-1.1: New USB device found, idVendor=1532, idProduct=0013 > usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 > usb 1-1.1: Product: Razer Orochi > usb 1-1.1: Manufacturer: Razer > done. > input: Razer Razer Orochi as > /devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1.1/1-1.1:1.0/input/input4 > generic-usb 0003:1532:0013.0002: input: USB HID v1.11 Mouse [Razer Razer > Orochi] on usb-0000:00:12.2-1.1/input0 > input: Razer Razer Orochi as > /devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1.1/1-1.1:1.1/input/input5 > generic-usb 0003:1532:0013.0003: input: USB HID v1.11 Keyboard [Razer Razer > Orochi] on usb-0000:00:12.2-1.1/input1 > Begin: Running /scripts/local-premount ... done. > usb 1-1.2: new low-speed USB device number 5 using ehci_hcd > EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) > Begin: Running /scripts/local-bottom ... done. > done. > Begin: Running /scripts/init-bottom ... done. > usb 1-1.2: New USB device found, idVendor=04f2, idProduct=0403 > usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 > usb 1-1.2: Product: USB Keyboard > usb 1-1.2: Manufacturer: Chicony > INIT: version 2.88 booting > input: Chicony USB Keyboard as > /devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1.2/1-1.2:1.0/input/input6 > generic-usb 0003:04F2:0403.0004: input: USB HID v1.11 Keyboard [Chicony USB > Keyboard] on usb-0000:00:12.2-1.2/input0 > Using makefile-style concurrent boot in runlevel S.input: Chicony U > SB Keyboard as > /devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1.2/1-1.2:1.1/input/input7 > generic-usb 0003:04F2:0403.0005: input,hiddev0: USB HID v1.11 Device [Chicony > USB Keyboard] on usb-0000:00:12.2-1.2/input1 > Files under mount point '/lib/init/rw' will be hidden. ...net firewire0: IPv4 > over IEEE 1394 on card 0000:05:00.0 > firewire_core 0000:05:00.0: refreshed device fw0 > (warning). > Files under mount point '/var/run' will be hidden. ... (warning). > Files under mount point '/var/lock' will be hidden. ... (warning). > Starting the hotplug events dispatcher: udevdudev[1286]: starting version 164 > . > Synthesizing the initial hotplug events...done. > Waiting for /dev to be fully populated...done. > Setting hostname to 'xen'...done. > Setting preliminary keymap...done. > Activating swap:. > EXT4-fs (dm-0): re-mounted. Opts: (null) > Will now check root file system:fsck from util-linux-ng 2.17.2 > [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a -C0 /dev/mapper/lemrouch-xen > /dev/mapper/lemrouch-xen: clean, 175647/1310720 files, 1276635/5242880 blocks > . > EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro > Loading kernel module firewire-sbp2. > Loading kernel module loop. > Cleaning up ifupdown.... > Setting up networking.... > Setting up LVM Volume Groups Reading all physical volumes. This may take a > while... > Found volume group "lemrouch" using metadata type lvm2 > 4 logical volume(s) in volume group "lemrouch" now active > . > Will now activate lvm and md swap:done. > Will now check all file systems. > fsck from util-linux-ng 2.17.2 > Checking all file systems. > Done checking file systems. A log is being saved in /var/log/fsck/checkfs if > that location is writable.. > Will now mount local filesystems:EXT4-fs (sda1): warning: mounting unchecked > fs, running e2fsck is recommended > EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) > . > Will now activate swapfile swap:done. > Cleaning up temporary files...Cleaning /tmp...done. > . > Checking minimum space in /tmp...done. > Setting kernel variables ... /etc/sysctl.conf...done. > Initializing random number generator...done. > Setting up X server socket directory /tmp/.X11-unix.... > Setting up ICE socket directory /tmp/.ICE-unix.... > Configuring network interfaces...device eth0 entered promiscuous mode > sky2 0000:04:00.0: eth0: enabling interface > done. > Cleaning up temporary files.... > Starting filesystem in userspace: fuse. > Setting console screen modes. > cannot (un)set powersave mode > Skipping font and keymap setup (handled by console-setup). > Setting up console font and keymap...done. > Setting sensors limits. > INIT: Entering runlevel: 3 > Using makefile-style concurrent boot in runlevel 3. > Not starting fancontrol; run pwmconfig first. ... (warning). > acpid: starting up with netlink and the input layer > > acpid: 1 rule loaded > > acpid: waiting for events: event logging is off > > Starting ACPI services.... > Starting system message bus: dbus. > sshd (2064): /proc/2064/oom_adj is deprecated, please use > /proc/2064/oom_score_adj instead. > Starting the Winbind daemon: winbind. > Starting OpenBSD Secure Shell server: sshd. > Starting oxenstored... > Setting domain 0 name... > Starting xenconsoled... > Starting domain name service...: bind9. > Starting Samba daemons: nmbd smbd. > Starting periodic command scheduler: cron. > Starting Postfix Mail Transport Agent: postfix. > BLKTAPCTRL[2234]: blktapctrl.c:792: blktapctrl: v1.0.0 > > BLKTAPCTRL[2234]: blktapctrl.c:794: Found driver: [raw image (aio)] > > BLKTAPCTRL[2234]: blktapctrl.c:794: Found driver: [raw image (sync)] > > BLKTAPCTRL[2234]: blktapctrl.c:794: Found driver: [vmware image (vmdk)] > > BLKTAPCTRL[2234]: blktapctrl.c:794: Found driver: [ramdisk image (ram)] > > BLKTAPCTRL[2234]: blktapctrl.c:794: Found driver: [qcow disk (qcow)] > > BLKTAPCTRL[2234]: blktapctrl.c:794: Found driver: [qcow2 disk (qcow2)] > > BLKTAPCTRL[2234]: blktapctrl_linux.c:86: blktap0 open failed > > BLKTAPCTRL[2234]: blktapctrl.c:861: couldn't open blktap interfacesky2 > 0000:04:00. > 0: eth0: Link is up at 100 Mbps, > full duplex, flow control both > BLKTAPCTRL[2234]: blktapctrl.c:924: Unable to start blktapctrlbr0: port 1(eth0 > ) entered forwarding state > > br0: port 1(eth0) entered forwarding state > Starting S.M.A.R.T. daemon: smartd. > br0: port 1(eth0) entered forwarding state > Running local boot scripts (/etc/rc.local)(XEN) PCI remove device 0000:00:12.2 > acpid: input device has been disconnected > > acpid: input device has been disconnected > > acpid: input device has been disconnected > > (XEN) PCI remove device 0000:00:13.2 > (XEN) PCI remove device 0000:00:16.2 > (XEN) PCI add device 0000:00:12.2 > (XEN) PCI add device 0000:00:13.2 > (XEN) PCI add device 0000:00:16.2 > . > acpid: input device has been disconnected > > acpid: input device has been disconnected > > (XEN) ioport_map:add: dom1 gport=3b0 mport=3b0 nr=c > (XEN) memory_map:add: dom1 gfn=a0 mfn=a0 nr=20 > (XEN) ioport_map:add: dom1 gport=3c0 mport=3c0 nr=3 > (XEN) ioport_map:add: dom1 gport=3c4 mport=3c4 nr=1c > (XEN) HVM1: HVM Loader > (XEN) HVM1: Detected Xen v4.2-unstable > (XEN) HVM1: Xenbus rings @0xfeffc000, event channel 8 > (XEN) HVM1: System requested ROMBIOS > (XEN) HVM1: CPU speed is 3010 MHz > (XEN) irq.c:270: Dom1 PCI link 0 changed 0 -> 5 > (XEN) HVM1: PCI-ISA link 0 routed to IRQ5 > (XEN) irq.c:270: Dom1 PCI link 1 changed 0 -> 10 > (XEN) HVM1: PCI-ISA link 1 routed to IRQ10 > (XEN) irq.c:270: Dom1 PCI link 2 changed 0 -> 11 > (XEN) HVM1: PCI-ISA link 2 routed to IRQ11 > (XEN) irq.c:270: Dom1 PCI link 3 changed 0 -> 5 > (XEN) HVM1: PCI-ISA link 3 routed to IRQ5 > (XEN) HVM1: pci dev 01:3 INTA->IRQ10 > (XEN) HVM1: pci dev 03:0 INTA->IRQ5 > (XEN) HVM1: pci dev 04:0 INTA->IRQ5 > (XEN) HVM1: pci dev 05:0 INTA->IRQ10 > (XEN) HVM1: pci dev 06:0 INTB->IRQ5 > (XEN) HVM1: pci dev 07:0 INTA->IRQ5 > (XEN) HVM1: pci dev 08:0 INTB->IRQ10 > (XEN) HVM1: pci dev 09:0 INTA->IRQ10 > (XEN) HVM1: pci dev 05:0 bar 10 size 10000000: e000000c > (XEN) memory_map:add: dom1 gfn=e0000 mfn=d0000 nr=10000 > (XEN) HVM1: pci dev 03:0 bar 14 size 01000000: f0000008 > (XEN) HVM1: pci dev 04:0 bar 10 size 00020000: f1000000 > (XEN) memory_map:add: dom1 gfn=f1020 mfn=fe9e0 nr=20 > (XEN) HVM1: pci dev 05:0 bar 18 size 00020000: f1020004 > (XEN) HVM1: pci dev 05:0 bar 30 size 00020000: f1040000 > (XEN) HVM1: pci dev 06:0 bar 10 size 00004000: f1060004 > (XEN) memory_map:add: dom1 gfn=f1060 mfn=fe9bc nr=4 > (XEN) HVM1: pci dev 09:0 bar 10 size 00004000: f1064004 > (XEN) memory_map:add: dom1 gfn=f1064 mfn=fe3f8 nr=4 > (XEN) HVM1: pci dev 07:0 bar 10 size 00001000: f1068000 > (XEN) memory_map:add: dom1 gfn=f1068 mfn=fe3f7 nr=1 > (XEN) HVM1: pci dev 08:0 bar 10 size 00001000: f1069000 > (XEN) memory_map:add: dom1 gfn=f1069 mfn=f0000 nr=1 > (XEN) HVM1: pci dev 03:0 bar 10 size 00000100: 0000c001 > (XEN) HVM1: pci dev 05:0 bar 20 size 00000100: 0000c101 > (XEN) HVM1: pci dev 04:0 bar 14 size 00000040: 0000c201 > (XEN) HVM1: pci dev 01:1 bar 20 size 00000010: 0000c241 > (XEN) HVM1: Multiprocessor initialisation: > (XEN) HVM1: - CPU0 ... 48-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... > done. > (XEN) HVM1: - CPU1 ... 48-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... > done. > (XEN) HVM1: - CPU2 ... 48-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... > done. > (XEN) HVM1: - CPU3 ... 48-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... > done. > (XEN) HVM1: - CPU4 ... 48-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... > done. > (XEN) HVM1: - CPU5 ... 48-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... > done. > (XEN) HVM1: Testing HVM environment: > (XEN) HVM1: - REP INSB across page boundaries ... passed > (XEN) HVM1: - GS base MSRs and SWAPGS ... passed > (XEN) HVM1: Passed 2 of 2 tests > (XEN) HVM1: Writing SMBIOS tables ... > (XEN) HVM1: Loading ROMBIOS ... > (XEN) HVM1: 9660 bytes of ROMBIOS high-memory extensions: > (XEN) HVM1: Relocating to 0xfc001000-0xfc0035bc ... done > (XEN) HVM1: Creating MP tables ... > (XEN) HVM1: Loading VGABIOS of passthroughed gfx ... > (XEN) HVM1: Loading PCI Option ROM ... > (XEN) HVM1: - Manufacturer: http://ipxe.org > (XEN) HVM1: - Product name: iPXE > (XEN) HVM1: Option ROMs: > (XEN) HVM1: c0000-cffff: VGA BIOS > (XEN) HVM1: d0000-e0fff: Etherboot ROM > (XEN) HVM1: Loading ACPI ... > (XEN) HVM1: vm86 TSS at fc00f700 > (XEN) HVM1: BIOS map: > (XEN) HVM1: f0000-fffff: Main BIOS > (XEN) HVM1: E820 table: > (XEN) HVM1: [00]: 00000000:00000000 - 00000000:0009e000: RAM > (XEN) HVM1: [01]: 00000000:0009e000 - 00000000:000a0000: RESERVED > (XEN) HVM1: HOLE: 00000000:000a0000 - 00000000:000e0000 > (XEN) HVM1: [02]: 00000000:000e0000 - 00000000:00100000: RESERVED > (XEN) HVM1: [03]: 00000000:00100000 - 00000000:e0000000: RAM > (XEN) HVM1: HOLE: 00000000:e0000000 - 00000000:fc000000 > (XEN) HVM1: [04]: 00000000:fc000000 - 00000001:00000000: RESERVED > (XEN) HVM1: [05]: 00000001:00000000 - 00000001:20000000: RAM > (XEN) HVM1: Invoking ROMBIOS ... > (XEN) HVM1: $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $ > (XEN) HVM1: Bochs BIOS - build: 06/23/99 > (XEN) HVM1: $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $ > (XEN) HVM1: Options: apmbios pcibios eltorito PMM > (XEN) HVM1: > (XEN) HVM1: ata0-0: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 > (XEN) HVM1: ata0 master: QEMU HARDDISK ATA-7 Hard-Disk (20480 MBytes) > (XEN) HVM1: ata0-1: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 > (XEN) HVM1: ata0 slave: QEMU HARDDISK ATA-7 Hard-Disk (51200 MBytes) > (XEN) HVM1: > (XEN) HVM1: > (XEN) HVM1: > (XEN) HVM1: Press F12 for boot menu. > (XEN) HVM1: > (XEN) HVM1: Booting from Hard Disk... > (XEN) HVM1: Booting from 0000:7c00 > (XEN) irq.c:270: Dom1 PCI link 0 changed 5 -> 0 > (XEN) irq.c:270: Dom1 PCI link 1 changed 10 -> 0 > (XEN) irq.c:270: Dom1 PCI link 2 changed 11 -> 0 > (XEN) irq.c:270: Dom1 PCI link 3 changed 5 -> 0 > (XEN) memory_map:remove: dom1 gfn=e0000 mfn=d0000 nr=10000 > (XEN) memory_map:remove: dom1 gfn=f1020 mfn=fe9e0 nr=20 > (XEN) memory_map:add: dom1 gfn=e0000 mfn=d0000 nr=10000 > (XEN) memory_map:add: dom1 gfn=f1020 mfn=fe9e0 nr=20 > (XEN) memory_map:remove: dom1 gfn=f1060 mfn=fe9bc nr=4 > (XEN) memory_map:add: dom1 gfn=f1060 mfn=fe9bc nr=4 > (XEN) memory_map:remove: dom1 gfn=f1068 mfn=fe3f7 nr=1 > (XEN) memory_map:add: dom1 gfn=f1068 mfn=fe3f7 nr=1 > (XEN) memory_map:remove: dom1 gfn=f1069 mfn=f0000 nr=1 > (XEN) memory_map:add: dom1 gfn=f1069 mfn=f0000 nr=1 > (XEN) memory_map:remove: dom1 gfn=f1064 mfn=fe3f8 nr=4 > (XEN) memory_map:add: dom1 gfn=f1064 mfn=fe3f8 nr=4 > (XEN) grant_table.c:1174:d1 Expanding dom (1) grant table from (4) to (32) > frames. > (XEN) irq.c:350: Dom1 callback via changed to GSI 28 > (XEN) Domain 0 crashed: rebooting machine in 5 seconds. > __ __ _ _ ____ _ _ _ > \ \/ /___ _ __ | || | |___ \ _ _ _ __ ___| |_ __ _| |__ | | ___ > \ // _ \ '_ \ | || |_ __) |__| | | | '_ \/ __| __/ _` | '_ \| |/ _ \ > / \ __/ | | | |__ _| / __/|__| |_| | | | \__ \ || (_| | |_) | | __/ > /_/\_\___|_| |_| |_|(_)_____| \__,_|_| |_|___/\__\__,_|_.__/|_|\___| > > (XEN) Xen version 4.2-unstable (root@(none)) (gcc version 4.4.5 (Debian > 4.4.5-8) ) Sat May 5 15:48:48 CEST 2012 > (XEN) Latest ChangeSet: Fri May 04 11:18:48 2012 +0100 25259:0f53540494f7 > (XEN) Console output is synchronous. > (XEN) Bootloader: GRUB 1.98+20100804-14+squeeze1 > (XEN) Command line: placeholder dom0_mem=2G dom0_max_vcpus=6 loglvl=all > guest_loglvl=all sync_console com1=115200,8n1,0xac00 console=com1 > (XEN) Video information: > (XEN) VGA is text mode 80x25, font 8x16 > (XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds > (XEN) Disc information: > (XEN) Found 1 MBR signatures > (XEN) Found 1 EDD information structures > (XEN) Xen-e820 RAM map: > (XEN) 0000000000000000 - 000000000009ac00 (usable) > (XEN) 000000000009ac00 - 00000000000a0000 (reserved) > (XEN) 00000000000e4000 - 0000000000100000 (reserved) > (XEN) 0000000000100000 - 00000000cfe80000 (usable) > (XEN) 00000000cfe80000 - 00000000cfe98000 (ACPI data) > (XEN) 00000000cfe98000 - 00000000cfec0000 (ACPI NVS) > (XEN) 00000000cfec0000 - 00000000cff00000 (reserved) > (XEN) 00000000ffe00000 - 0000000100000000 (reserved) > (XEN) 0000000100000000 - 0000000230000000 (usable) > (XEN) ACPI: RSDP 000FBF20, 0024 (r2 ACPIAM) > (XEN) ACPI: XSDT CFE80100, 005C (r1 102811 XSDT1740 20111028 MSFT 97) > (XEN) ACPI: FACP CFE80290, 00F4 (r3 102811 FACP1740 20111028 MSFT 97) > (XEN) ACPI: DSDT CFE80470, E6E3 (r1 A1595 A1595000 0 INTL 20060113) > (XEN) ACPI: FACS CFE98000, 0040 > (XEN) ACPI: APIC CFE80390, 0098 (r1 102811 APIC1740 20111028 MSFT 97) > (XEN) ACPI: MCFG CFE80430, 003C (r1 102811 OEMMCFG 20111028 MSFT 97) > (XEN) ACPI: OEMB CFE98040, 0072 (r1 102811 OEMB1740 20111028 MSFT 97) > (XEN) ACPI: HPET CFE8F8C0, 0038 (r1 102811 OEMHPET 20111028 MSFT 97) > (XEN) ACPI: IVRS CFE8F900, 00E0 (r1 AMD RD890S 202031 AMD 0) > (XEN) ACPI: SSDT CFE8F9E0, 0E10 (r1 A M I POWERNOW 1 AMD 1) > (XEN) System RAM: 8190MB (8386664kB) > (XEN) No NUMA configuration found > (XEN) Faking a node at 0000000000000000-0000000230000000 > (XEN) Domain heap initialised > (XEN) found SMP MP-table at 000ff780 > (XEN) DMI present. > (XEN) Using APIC driver default > (XEN) ACPI: PM-Timer IO Port: 0x808 > (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[804,0], pm1x_evt[800,0] > (XEN) ACPI: wakeup_vec[cfe9800c], vec_size[20] > (XEN) ACPI: Local APIC address 0xfee00000 > (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > (XEN) Processor #0 0:10 APIC version 16 > (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) > (XEN) Processor #1 0:10 APIC version 16 > (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) > (XEN) Processor #2 0:10 APIC version 16 > (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) > (XEN) Processor #3 0:10 APIC version 16 > (XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled) > (XEN) Processor #4 0:10 APIC version 16 > (XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) > (XEN) Processor #5 0:10 APIC version 16 > (XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled) > (XEN) ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0]) > (XEN) IOAPIC[0]: apic_id 6, version 33, address 0xfec00000, GSI 0-23 > (XEN) ACPI: IOAPIC (id[0x07] address[0xfec20000] gsi_base[24]) > (XEN) IOAPIC[1]: apic_id 7, version 33, address 0xfec20000, GSI 24-55 > (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) > (XEN) ACPI: IRQ0 used by override. > (XEN) ACPI: IRQ2 used by override. > (XEN) ACPI: IRQ9 used by override. > (XEN) Enabling APIC mode: Flat. Using 2 I/O APICs > (XEN) ACPI: HPET id: 0x8300 base: 0xfed00000 > (XEN) Table is not found! > (XEN) Using ACPI (MADT) for SMP configuration information > (XEN) SMP: Allowing 8 CPUs (2 hotplug CPUs) > (XEN) IRQ limits: 56 GSI, 1112 MSI/MSI-X > (XEN) Using scheduler: SMP Credit Scheduler (credit) > (XEN) Detected 3010.254 MHz processor. > (XEN) Initing memory sharing. > (XEN) AMD Fam10h machine check reporting enabled > (XEN) PCI: MCFG configuration 0: base e0000000 segment 0000 buses 00 - ff > (XEN) PCI: Not using MCFG for segment 0000 bus 00-ff > (XEN) AMD-Vi: IOMMU 0 Enabled. > (XEN) AMD-Vi: Enabling global vector map > (XEN) I/O virtualisation enabled > (XEN) - Dom0 mode: Relaxed > (XEN) ENABLING IO-APIC IRQs > (XEN) -> Using new ACK method > (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1 > (XEN) Platform timer is 14.318MHz HPET > (XEN) Allocated console ring of 64 KiB. > (XEN) HVM: ASIDs enabled. > (XEN) SVM: Supported advanced features: > (XEN) - Nested Page Tables (NPT) > (XEN) - Last Branch Record (LBR) Virtualisation > (XEN) - Next-RIP Saved on #VMEXIT > (XEN) - Pause-Intercept Filter > (XEN) HVM: SVM enabled > (XEN) HVM: Hardware Assisted Paging (HAP) detected > (XEN) HVM: HAP page sizes: 4kB, 2MB, 1GB > (XEN) microcode: collect_cpu_info: patch_id=0x10000bf > (XEN) microcode: collect_cpu_info: patch_id=0x10000bf > (XEN) microcode: collect_cpu_info: patch_id=0x10000bf > (XEN) microcode: collect_cpu_info: patch_id=0x10000bf > (XEN) Brought up 6 CPUs > (XEN) microcode: collect_cpu_info: patch_id=0x10000bf > (XEN) HPET's MSI mode hasn't been supported when Interrupt Remapping is > enabled. > (XEN) ACPI sleep modes: S3 > (XEN) MCA: Use hw thresholding to adjust polling frequency > (XEN) mcheck_poll: Machine check polling timer started. > (XEN) Xenoprofile: Failed to setup IBS LVT offset, IBSCTL = 0xffffffff > (XEN) *** LOADING DOMAIN 0 *** > (XEN) elf_parse_binary: phdr: paddr=0x1000000 memsz=0x5d3000 > (XEN) elf_parse_binary: phdr: paddr=0x15d3000 memsz=0x6e0e8 > (XEN) elf_parse_binary: phdr: paddr=0x1642000 memsz=0x12980 > (XEN) elf_parse_binary: phdr: paddr=0x1655000 memsz=0x4ff000 > (XEN) elf_parse_binary: memory: 0x1000000 -> 0x1b54000 > (XEN) elf_xen_parse_note: GUEST_OS = "linux" > (XEN) elf_xen_parse_note: GUEST_VERSION = "2.6" > (XEN) elf_xen_parse_note: XEN_VERSION = "xen-3.0" > (XEN) elf_xen_parse_note: VIRT_BASE = 0xffffffff80000000 > (XEN) elf_xen_parse_note: ENTRY = 0xffffffff81655200 > (XEN) elf_xen_parse_note: HYPERCALL_PAGE = 0xffffffff81001000 > (XEN) elf_xen_parse_note: FEATURES = > "!writable_page_tables|pae_pgdir_above_4gb" > (XEN) elf_xen_parse_note: PAE_MODE = "yes" > (XEN) elf_xen_parse_note: LOADER = "generic" > (XEN) elf_xen_parse_note: unknown xen elf note (0xd) > (XEN) elf_xen_parse_note: SUSPEND_CANCEL = 0x1 > (XEN) elf_xen_parse_note: HV_START_LOW = 0xffff800000000000 > (XEN) elf_xen_parse_note: PADDR_OFFSET = 0x0 > (XEN) elf_xen_addr_calc_check: addresses: > (XEN) virt_base = 0xffffffff80000000 > (XEN) elf_paddr_offset = 0x0 > (XEN) virt_offset = 0xffffffff80000000 > (XEN) virt_kstart = 0xffffffff81000000 > (XEN) virt_kend = 0xffffffff81b54000 > (XEN) virt_entry = 0xffffffff81655200 > (XEN) p2m_base = 0xffffffffffffffff > (XEN) Xen kernel: 64-bit, lsb, compat32 > (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x1b54000 > (XEN) PHYSICAL MEMORY ARRANGEMENT: > (XEN) Dom0 alloc.: 0000000224000000->0000000228000000 (506308 pages to be > allocated) > (XEN) Init. ramdisk: 000000022f9c4000->000000022ffff200 > (XEN) VIRTUAL MEMORY ARRANGEMENT: > (XEN) Loaded kernel: ffffffff81000000->ffffffff81b54000 > (XEN) Init. ramdisk: ffffffff81b54000->ffffffff8218f200 > (XEN) Phys-Mach map: ffffffff82190000->ffffffff82590000 > (XEN) Start info: ffffffff82590000->ffffffff825904b4 > (XEN) Page tables: ffffffff82591000->ffffffff825a8000 > (XEN) Boot stack: ffffffff825a8000->ffffffff825a9000 > (XEN) TOTAL: ffffffff80000000->ffffffff82800000 > (XEN) ENTRY ADDRESS: ffffffff81655200 > (XEN) Dom0 has maximum 6 VCPUs > (XEN) elf_load_binary: phdr 0 at 0xffffffff81000000 -> 0xffffffff815d3000 > (XEN) elf_load_binary: phdr 1 at 0xffffffff815d3000 -> 0xffffffff816410e8 > (XEN) elf_load_binary: phdr 2 at 0xffffffff81642000 -> 0xffffffff81654980 > (XEN) elf_load_binary: phdr 3 at 0xffffffff81655000 -> 0xffffffff816cc000 > (XEN) Scrubbing Free RAM: > .............................................................done. > (XEN) Initial low memory virq threshold set at 0x4000 pages. > (XEN) Std. Loglevel: All > (XEN) Guest Loglevel: All > (XEN) ********************************************** > (XEN) ******* WARNING: CONSOLE OUTPUT IS SYNCHRONOUS > (XEN) ******* This option is intended to aid debugging of Xen by ensuring > (XEN) ******* that all output is synchronously delivered on the serial line. > (XEN) ******* However it can introduce SIGNIFICANT latencies and affect > (XEN) ******* timekeeping. It is NOT recommended for production use! > (XEN) ********************************************** > (XEN) 3... 2... 1... > (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to > Xen) > (XEN) Freed 256kB init memory. > mapping kernel into physical memory > Xen: setup ISA identity maps > about to get started... > Initializing cgroup subsys cpuset > Initializing cgroup subsys cpu > Linux version 3.4.0-rc4-00395-g87b5d90-dirty (root@xen) (gcc version 4.4.5 > (Debian 4.4.5-8) ) #7 SMP PREEMPT Mon May 7 13:16:10 CEST 2012 > Command line: placeholder root=/dev/mapper/lemrouch-xen ro mem=2G panic=15 > xen-pciback.hide=(00:14.2) console=hvc0 earlyprintk=xen > Freeing 9a-100 pfn range: 102 pages freed > Released 102 pages of unused memory > Set 197094 page(s) to 1-1 mapping > Populating 80000-80066 pfn range: 102 pages added > BIOS-provided physical RAM map: > Xen: 0000000000000000 - 000000000009a000 (usable) > Xen: 000000000009ac00 - 0000000000100000 (reserved) > Xen: 0000000000100000 - 0000000080066000 (usable) > Xen: 0000000080066000 - 00000000cfe80000 (unusable) > Xen: 00000000cfe80000 - 00000000cfe98000 (ACPI data) > Xen: 00000000cfe98000 - 00000000cfec0000 (ACPI NVS) > Xen: 00000000cfec0000 - 00000000cff00000 (reserved) > Xen: 00000000fec00000 - 00000000fec01000 (reserved) > Xen: 00000000fec20000 - 00000000fec21000 (reserved) > Xen: 00000000fee00000 - 00000000fee01000 (reserved) > Xen: 00000000ffe00000 - 0000000100000000 (reserved) > Xen: 0000000100000000 - 0000000230000000 (unusable) > bootconsole [xenboot0] enabled > NX (Execute Disable) protection: active > user-defined physical RAM map: > user: 0000000000000000 - 000000000009a000 (usable) > user: 000000000009ac00 - 0000000000100000 (reserved) > user: 0000000000100000 - 0000000080000000 (usable) > user: 0000000080066000 - 00000000cfe80000 (unusable) > user: 00000000cfe80000 - 00000000cfe98000 (ACPI data) > user: 00000000cfe98000 - 00000000cfec0000 (ACPI NVS) > user: 00000000cfec0000 - 00000000cff00000 (reserved) > user: 00000000fec00000 - 00000000fec01000 (reserved) > user: 00000000fec20000 - 00000000fec21000 (reserved) > user: 00000000fee00000 - 00000000fee01000 (reserved) > user: 00000000ffe00000 - 0000000100000000 (reserved) > user: 0000000100000000 - 0000000230000000 (unusable) > DMI present. > No AGP bridge found > last_pfn = 0x80000 max_arch_pfn = 0x400000000 > found SMP MP-table at [ffff8800000ff780] ff780 > init_memory_mapping: 0000000000000000-0000000080000000 > RAMDISK: 01b54000 - 02190000 > ACPI: RSDP 00000000000fbf20 00024 (v02 ACPIAM) > ACPI: XSDT 00000000cfe80100 0005C (v01 102811 XSDT1740 20111028 MSFT 00000097) > ACPI: FACP 00000000cfe80290 000F4 (v03 102811 FACP1740 20111028 MSFT 00000097) > ACPI: DSDT 00000000cfe80470 0E6E3 (v01 A1595 A1595000 00000000 INTL 20060113) > ACPI: FACS 00000000cfe98000 00040 > ACPI: APIC 00000000cfe80390 00098 (v01 102811 APIC1740 20111028 MSFT 00000097) > ACPI: MCFG 00000000cfe80430 0003C (v01 102811 OEMMCFG 20111028 MSFT 00000097) > ACPI: OEMB 00000000cfe98040 00072 (v01 102811 OEMB1740 20111028 MSFT 00000097) > ACPI: HPET 00000000cfe8f8c0 00038 (v01 102811 OEMHPET 20111028 MSFT 00000097) > ACPI: IVRS 00000000cfe8f900 000E0 (v01 AMD RD890S 00202031 AMD 00000000) > ACPI: SSDT 00000000cfe8f9e0 00E10 (v01 A M I POWERNOW 00000001 AMD 00000001) > No NUMA configuration found > Faking a node at 0000000000000000-0000000080000000 > Initmem setup node 0 0000000000000000-0000000080000000 > NODE_DATA [000000007fffc000 - 000000007fffffff] > Zone PFN ranges: > DMA 0x00000010 -> 0x00001000 > DMA32 0x00001000 -> 0x00100000 > Normal empty > Movable zone start PFN for each node > Early memory PFN ranges > 0: 0x00000010 -> 0x0000009a > 0: 0x00000100 -> 0x00080000 > ACPI: PM-Timer IO Port: 0x808 > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > BIOS bug: APIC version is 0 for CPU 0/0x0, fixing up to 0x10 > ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) > ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) > ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) > ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled) > ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) > ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled) > ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled) > ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0]) > IOAPIC[0]: apic_id 6, version 253, address 0xfec00000, GSI 0-253 > ACPI: IOAPIC (id[0x07] address[0xfec20000] gsi_base[24]) > IOAPIC[1]: apic_id 7, version 253, address 0xfec20000, GSI 24-277 > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) > Using ACPI (MADT) for SMP configuration information > ACPI: HPET id: 0x8300 base: 0xfed00000 > 8 Processors exceeds NR_CPUS limit of 6 > SMP: Allowing 6 CPUs, 0 hotplug CPUs > Allocating PCI resources starting at cff00000 (gap: cff00000:2ed00000) > Booting paravirtualized kernel on Xen > Xen version: 4.2-unstable (preserve-AD) > setup_percpu: NR_CPUS:6 nr_cpumask_bits:6 nr_cpu_ids:6 nr_node_ids:1 > PERCPU: Embedded 26 pages/cpu @ffff88007ff4c000 s76160 r8192 d22144 u106496 > Built 1 zonelists in Node order, mobility grouping on. Total pages: 515976 > Policy zone: DMA32 > Kernel command line: placeholder root=/dev/mapper/lemrouch-xen ro mem=2G > panic=15 xen-pciback.hide=(00:14.2) console=hvc0 earlyprintk=xen > PID hash table entries: 4096 (order: 3, 32768 bytes) > Placing 64MB software IO TLB between ffff880079600000 - ffff88007d600000 > software IO TLB at phys 0x79600000 - 0x7d600000 > Memory: 1975064k/2097152k available (4567k kernel code, 472k absent, 121616k > reserved, 1833k data, 532k init) > SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 > Preemptible hierarchical RCU implementation. > Dump stacks of tasks blocking RCU-preempt GP. > NR_IRQS:4352 nr_irqs:1536 16 > xen: sci override: global_irq=9 trigger=0 polarity=1 > xen: acpi sci 9 > xen_map_pirq_gsi: returning irq 9 for gsi 9 > Console: colour VGA+ 80x25 > console [hvc0] enabled, bootconsole disabled > console [hvc0] enabled, bootconsole disabled > installing Xen timer for CPU 0 > Detected 3010.254 MHz processor. > Calibrating delay loop (skipped), value calculated using timer frequency.. > 6020.50 BogoMIPS (lpj=3010254) > pid_max: default: 32768 minimum: 301 > Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) > Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) > Mount-cache hash table entries: 256 > Initializing cgroup subsys devices > Initializing cgroup subsys freezer > Initializing cgroup subsys blkio > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 0 > mce: CPU supports 6 MCE banks > ACPI: Core revision 20120320 > cpu 0 spinlock event irq 295 > Performance Events: (XEN) traps.c:2561:d0 Domain attempted WRMSR > 00000000c0010004 from 0x0000e4a75df86514 to 0x000000000000abcd. > Broken PMU hardware detected, using software events only. > MCE: In-kernel MCE decoding enabled. > installing Xen timer for CPU 1 > cpu 1 spinlock event irq 302 > installing Xen timer for CPU 2 > cpu 2 spinlock event irq 309 > installing Xen timer for CPU 3 > cpu 3 spinlock event irq 316 > installing Xen timer for CPU 4 > cpu 4 spinlock event irq 323 > installing Xen timer for CPU 5 > cpu 5 spinlock event irq 330 > Brought up 6 CPUs > devtmpfs: initialized > Grant tables using version 2 layout. > Grant table initialized > NET: Registered protocol family 16 > TOM: 00000000d0000000 aka 3328M > TOM2: 0000000230000000 aka 8960M > ACPI: bus type pci registered > PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] > (base 0xe0000000) > PCI: not using MMCONFIG > PCI: Using configuration type 1 for base access > PCI: Using configuration type 1 for extended access > bio: create slab <bio-0> at 0 > ACPI: Added _OSI(Module Device) > ACPI: Added _OSI(Processor Device) > ACPI: Added _OSI(3.0 _SCP Extensions) > ACPI: Added _OSI(Processor Aggregator Device) > ACPI: Executed 3 blocks of module-level executable AML code > ACPI: Interpreter enabled > ACPI: (supports S0 S5) > ACPI: Using IOAPIC for interrupt routing > PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] > (base 0xe0000000) > PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard > resources > ACPI: EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62 > PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and > report a bug > ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) > pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] > pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] > pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] > pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] > pci_root PNP0A03:00: host bridge window [mem 0xcff00000-0xdfffffff] > pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff] > PCI host bridge to bus 0000:00 > pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] > pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] > pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] > pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff] > pci_bus 0000:00: root bus resource [mem 0xcff00000-0xdfffffff] > pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff] > pci 0000:00:02.0: PCI bridge to [bus 07-07] > pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it > with 'pcie_aspm=force' > pci 0000:00:04.0: PCI bridge to [bus 06-06] > pci 0000:00:05.0: PCI bridge to [bus 05-05] > pci 0000:00:06.0: PCI bridge to [bus 04-04] > pci 0000:00:07.0: PCI bridge to [bus 03-03] > pci 0000:00:0d.0: PCI bridge to [bus 02-02] > pci 0000:00:14.4: PCI bridge to [bus 01-01] (subtractive decode) > pci0000:00: Requesting ACPI _OSC control (0x1d) > pci0000:00: ACPI _OSC control (0x1c) granted > (XEN) PCI add device 0000:00:00.0 > (XEN) PCI add device 0000:00:00.2 > (XEN) PCI add device 0000:00:02.0 > (XEN) PCI add device 0000:00:04.0 > (XEN) PCI add device 0000:00:05.0 > (XEN) PCI add device 0000:00:06.0 > (XEN) PCI add device 0000:00:07.0 > (XEN) PCI add device 0000:00:0d.0 > (XEN) PCI add device 0000:00:11.0 > (XEN) PCI add device 0000:00:12.0 > (XEN) PCI add device 0000:00:12.2 > (XEN) PCI add device 0000:00:13.0 > (XEN) PCI add device 0000:00:13.2 > (XEN) PCI add device 0000:00:14.0 > (XEN) PCI add device 0000:00:14.2 > (XEN) PCI add device 0000:00:14.3 > (XEN) PCI add device 0000:00:14.4 > (XEN) PCI add device 0000:00:14.5 > (XEN) PCI add device 0000:00:16.0 > (XEN) PCI add device 0000:00:16.2 > (XEN) PCI add device 0000:00:18.0 > (XEN) PCI add device 0000:00:18.1 > (XEN) PCI add device 0000:00:18.2 > (XEN) PCI add device 0000:00:18.3 > (XEN) PCI add device 0000:00:18.4 > (XEN) PCI add device 0000:07:00.0 > (XEN) PCI add device 0000:07:00.1 > (XEN) PCI add device 0000:06:00.0 > (XEN) PCI add device 0000:06:00.1 > pci 0000:06:00.1: Failed to add - passthrough or MSI/MSI-X might fail! > (XEN) PCI add device 0000:05:00.0 > (XEN) PCI add device 0000:04:00.0 > (XEN) PCI add device 0000:03:00.0 > (XEN) PCI add device 0000:02:00.0 > (XEN) PCI add device 0000:02:00.1 > ACPI: PCI Interrupt Link [LNKA] (IRQs *4 7 10 11 14 15) > ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 *10 11 14 15) > ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 *11 14 15) > ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 14 15) > ACPI: PCI Interrupt Link [LNKE] (IRQs 4 *7 10 11 14 15) > ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 *11 14 15) > ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 *10 11 14 15) > ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0, disabled. > xen/balloon: Initialising balloon driver. > xen-balloon: Initialising balloon driver. > vgaarb: device added: PCI:0000:07:00.0,decodes=io+mem,owns=io+mem,locks=none > vgaarb: loaded > vgaarb: bridge control possible 0000:07:00.0 > SCSI subsystem initialized > usbcore: registered new interface driver usbfs > usbcore: registered new interface driver hub > usbcore: registered new device driver usb > PCI: Using ACPI for IRQ routing > Switching to clocksource xen > FS-Cache: Loaded > CacheFiles: Loaded > pnp: PnP ACPI init > ACPI: bus type pnp registered > system 00:01: [mem 0xfec20000-0xfec200ff] could not be reserved > system 00:02: [mem 0xf6000000-0xf6003fff] has been reserved > xen_map_pirq_gsi: returning irq 8 for gsi 8 > xen_map_pirq_gsi: returning irq 13 for gsi 13 > system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved > system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved > system 00:09: [io 0x04d0-0x04d1] has been reserved > system 00:09: [io 0x040b] has been reserved > system 00:09: [io 0x04d6] has been reserved > system 00:09: [io 0x0c00-0x0c01] has been reserved > system 00:09: [io 0x0c14] has been reserved > system 00:09: [io 0x0c50-0x0c51] has been reserved > system 00:09: [io 0x0c52] has been reserved > system 00:09: [io 0x0c6c] has been reserved > system 00:09: [io 0x0c6f] has been reserved > system 00:09: [io 0x0cd0-0x0cd1] has been reserved > system 00:09: [io 0x0cd2-0x0cd3] has been reserved > system 00:09: [io 0x0cd4-0x0cd5] has been reserved > system 00:09: [io 0x0cd6-0x0cd7] has been reserved > system 00:09: [io 0x0cd8-0x0cdf] has been reserved > system 00:09: [io 0x0800-0x089f] has been reserved > system 00:09: [io 0x0b00-0x0b1f] has been reserved > system 00:09: [io 0x0b20-0x0b3f] has been reserved > system 00:09: [io 0x0900-0x090f] has been reserved > system 00:09: [io 0x0910-0x091f] has been reserved > system 00:09: [io 0xfe00-0xfefe] has been reserved > system 00:09: [mem 0xcff00000-0xcfffffff] has been reserved > system 00:09: [mem 0xffb80000-0xffbfffff] has been reserved > system 00:09: [mem 0xfec10000-0xfec1001f] has been reserved > system 00:09: [mem 0xfed80000-0xfed80fff] has been reserved > system 00:0a: [io 0x0230-0x023f] has been reserved > system 00:0a: [io 0x0290-0x029f] has been reserved > system 00:0a: [io 0x0f40-0x0f4f] has been reserved > system 00:0a: [io 0x0a30-0x0a3f] has been reserved > system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved > system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved > system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved > system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved > system 00:0c: [mem 0x00100000-0xcfefffff] could not be reserved > system 00:0c: [mem 0xfec00000-0xffffffff] could not be reserved > pnp: PnP ACPI: found 13 devices > ACPI: ACPI bus type pnp unregistered > pciback 0000:00:14.2: seizing device > PM-Timer failed consistency check (0x0xffffff) - aborting. > pci 0000:00:02.0: PCI bridge to [bus 07-07] > pci 0000:00:02.0: bridge window [io 0xe000-0xefff] > pci 0000:00:02.0: bridge window [mem 0xfe900000-0xfe9fffff] > pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] > pci 0000:00:04.0: PCI bridge to [bus 06-06] > pci 0000:00:04.0: bridge window [io 0xd000-0xdfff] > pci 0000:00:04.0: bridge window [mem 0xfe800000-0xfe8fffff] > pci 0000:00:05.0: PCI bridge to [bus 05-05] > pci 0000:00:05.0: bridge window [io 0xc000-0xcfff] > pci 0000:00:05.0: bridge window [mem 0xfe700000-0xfe7fffff] > pci 0000:00:06.0: PCI bridge to [bus 04-04] > pci 0000:00:06.0: bridge window [io 0xb000-0xbfff] > pci 0000:00:06.0: bridge window [mem 0xfe600000-0xfe6fffff] > pci 0000:00:07.0: PCI bridge to [bus 03-03] > pci 0000:00:07.0: bridge window [mem 0xfe500000-0xfe5fffff] > pci 0000:00:0d.0: PCI bridge to [bus 02-02] > pci 0000:00:0d.0: bridge window [io 0xa000-0xafff] > pci 0000:00:0d.0: bridge window [mem 0xfe400000-0xfe4fffff] > pci 0000:00:14.4: PCI bridge to [bus 01-01] > xen_map_pirq_gsi: returning irq 52 for gsi 52 > Already setup the GSI :52 > xen_map_pirq_gsi: returning irq 52 for gsi 52 > Already setup the GSI :52 > xen_map_pirq_gsi: returning irq 53 for gsi 53 > Already setup the GSI :53 > NET: Registered protocol family 2 > IP route cache hash table entries: 65536 (order: 7, 524288 bytes) > TCP established hash table entries: 262144 (order: 10, 4194304 bytes) > TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) > TCP: Hash tables configured (established 262144 bind 65536) > TCP: reno registered > UDP hash table entries: 1024 (order: 3, 32768 bytes) > UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) > NET: Registered protocol family 1 > xen_map_pirq_gsi: returning irq 18 for gsi 18 > Already setup the GSI :18 > xen_map_pirq_gsi: returning irq 17 for gsi 17 > Already setup the GSI :17 > xen_map_pirq_gsi: returning irq 18 for gsi 18 > Already setup the GSI :18 > xen_map_pirq_gsi: returning irq 18 for gsi 18 > Already setup the GSI :18 > xen_map_pirq_gsi: returning irq 17 for gsi 17 > Already setup the GSI :17 > Unpacking initramfs... > Freeing initrd memory: 6384k freed > microcode: CPU0: patch_level=0x010000bf > microcode: CPU1: patch_level=0x010000bf > microcode: CPU2: patch_level=0x010000bf > microcode: CPU3: patch_level=0x010000bf > microcode: CPU4: patch_level=0x010000bf > microcode: CPU5: patch_level=0x010000bf > microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, > Peter Oruba > NTFS driver 2.1.30 [Flags: R/W]. > msgmni has been set to 3870 > Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) > io scheduler noop registered (default) > pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt > pci 0000:07:00.0: Signaling PME through PCIe PME interrupt > pci 0000:07:00.1: Signaling PME through PCIe PME interrupt > pcieport 0000:00:04.0: Signaling PME through PCIe PME interrupt > pci 0000:06:00.0: Signaling PME through PCIe PME interrupt > pci 0000:06:00.1: Signaling PME through PCIe PME interrupt > pcieport 0000:00:05.0: Signaling PME through PCIe PME interrupt > pci 0000:05:00.0: Signaling PME through PCIe PME interrupt > pcieport 0000:00:06.0: Signaling PME through PCIe PME interrupt > pci 0000:04:00.0: Signaling PME through PCIe PME interrupt > pcieport 0000:00:07.0: Signaling PME through PCIe PME interrupt > pci 0000:03:00.0: Signaling PME through PCIe PME interrupt > pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt > pci 0000:02:00.0: Signaling PME through PCIe PME interrupt > pci 0000:02:00.1: Signaling PME through PCIe PME interrupt > pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 > ACPI: Power Button [PWRB] > input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 > ACPI: Power Button [PWRF] > GHES: HEST is not enabled! > Event-channel device installed. > xen-pciback: backend is vpci > Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled > 0000:02:00.1: ttyS0 at I/O 0xa880 (irq = 41) is a ST16650V2 > hpet_acpi_add: no address or irqs in _CRS > Non-volatile memory driver v1.3 > Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 > seconds). > Hangcheck: Using getrawmonotonic(). > loop: module loaded > ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode > ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part > scsi0 : ahci > scsi1 : ahci > scsi2 : ahci > scsi3 : ahci > scsi4 : ahci > scsi5 : ahci > ata2: SATA max UDMA/133 abar m1024@0xfe3fe000 port 0xfe3fe100 irq 19 > ata3: SATA max UDMA/133 abar m1024@0xfe3fe000 port 0xfe3fe180 irq 19 > ata4: SATA max UDMA/133 abar m1024@0xfe3fe000 port 0xfe3fe200 irq 19 > ata5: SATA max UDMA/133 abar m1024@0xfe3fe000 port 0xfe3fe280 irq 19 > ata6: SATA max UDMA/133 abar m1024@0xfe3fe000 port 0xfe3fe300 irq 19 > ata7: SATA max UDMA/133 abar m1024@0xfe3fe000 port 0xfe3fe380 irq 19 > ahci 0000:06:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode > ahci 0000:06:00.0: flags: 64bit ncq pm led clo pmp pio slum part > scsi6 : ahci > scsi7 : ahci > ata8: SATA max UDMA/133 abar m8192@0xfe8fe000 port 0xfe8fe100 irq 44 > ata9: SATA max UDMA/133 abar m8192@0xfe8fe000 port 0xfe8fe180 irq 44 > tun: Universal TUN/TAP device driver, 1.6 > tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx> > sky2: driver version 1.30 > sky2 0000:04:00.0: Yukon-2 Optima chip revision 1 > sky2 0000:04:00.0: eth0: addr 20:cf:30:6d:89:a5 > usbcore: registered new interface driver cdc_ncm > firewire_ohci 0000:05:00.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT > contexts, quirks 0x11 > ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver > xen_map_pirq_gsi: returning irq 17 for gsi 17 > Already setup the GSI :17 > ehci_hcd 0000:00:12.2: EHCI Host Controller > ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 > ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh > workaround > ehci_hcd 0000:00:12.2: debug port 1 > ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe3fe400 > ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 > usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 > usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb1: Product: EHCI Host Controller > usb usb1: Manufacturer: Linux 3.4.0-rc4-00395-g87b5d90-dirty ehci_hcd > usb usb1: SerialNumber: 0000:00:12.2 > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 5 ports detected > xen_map_pirq_gsi: returning irq 17 for gsi 17 > Already setup the GSI :17 > ehci_hcd 0000:00:13.2: EHCI Host Controller > ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 > ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh > workaround > ehci_hcd 0000:00:13.2: debug port 1 > ehci_hcd 0000:00:13.2: irq 17, io mem 0xfe3fe800 > ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 > usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 > usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb2: Product: EHCI Host Controller > usb usb2: Manufacturer: Linux 3.4.0-rc4-00395-g87b5d90-dirty ehci_hcd > usb usb2: SerialNumber: 0000:00:13.2 > hub 2-0:1.0: USB hub found > hub 2-0:1.0: 5 ports detected > xen_map_pirq_gsi: returning irq 17 for gsi 17 > Already setup the GSI :17 > ehci_hcd 0000:00:16.2: EHCI Host Controller > ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3 > ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh > workaround > ata5: SATA link down (SStatus 0 SControl 300) > ata4: SATA link down (SStatus 0 SControl 300) > ehci_hcd 0000:00:16.2: debug port 1 > ehci_hcd 0000:00:16.2: irq 17, io mem 0xfe3fec00 > ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00 > usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 > usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb3: Product: EHCI Host Controller > usb usb3: Manufacturer: Linux 3.4.0-rc4-00395-g87b5d90-dirty ehci_hcd > usb usb3: SerialNumber: 0000:00:16.2 > ata8: SATA link down (SStatus 0 SControl 300) > hub 3-0:1.0: USB hub found > hub 3-0:1.0: 4 ports detected > ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver > xen_map_pirq_gsi: returning irq 18 for gsi 18 > Already setup the GSI :18 > ohci_hcd 0000:00:12.0: OHCI Host Controller > ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4 > ohci_hcd 0000:00:12.0: irq 18, io mem 0xfe3f7000 > ata9: SATA link down (SStatus 0 SControl 300) > ata7: SATA link down (SStatus 0 SControl 300) > ata3: SATA link down (SStatus 0 SControl 300) > ata2.00: ATA-8: INTEL SSDSA2CW120G3, 4PC10362, max UDMA/133 > ata2.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32) > ata6: SATA link down (SStatus 0 SControl 300) > usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb4: Product: OHCI Host Controller > usb usb4: Manufacturer: Linux 3.4.0-rc4-00395-g87b5d90-dirty ohci_hcd > usb usb4: SerialNumber: 0000:00:12.0 > hub 4-0:1.0: USB hub found > hub 4-0:1.0: 5 ports detected > xen_map_pirq_gsi: returning irq 18 for gsi 18 > Already setup the GSI :18 > ohci_hcd 0000:00:13.0: OHCI Host Controller > ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 > ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe3fc000 > ata2.00: configured for UDMA/133 > usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb5: Product: OHCI Host Controller > usb usb5: Manufacturer: Linux 3.4.0-rc4-00395-g87b5d90-dirty ohci_hcd > usb usb5: SerialNumber: 0000:00:13.0 > scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA2CW12 4PC1 PQ: 0 ANSI: 5 > hub 5-0:1.0: USB hub found > hub 5-0:1.0: 5 ports detected > xen_map_pirq_gsi: returning irq 18 for gsi 18 > Already setup the GSI :18 > ohci_hcd 0000:00:14.5: OHCI Host Controller > ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6 > ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe3fd000 > usb 1-1: new high-speed USB device number 2 using ehci_hcd > sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB) > sd 0:0:0:0: [sda] Write Protect is off > sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support > DPO or FUA > usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb6: Product: OHCI Host Controller > usb usb6: Manufacturer: Linux 3.4.0-rc4-00395-g87b5d90-dirty ohci_hcd > usb usb6: SerialNumber: 0000:00:14.5 > hub 6-0:1.0: USB hub found > hub 6-0:1.0: 2 ports detected > xen_map_pirq_gsi: returning irq 18 for gsi 18 > Already setup the GSI :18 > ohci_hcd 0000:00:16.0: OHCI Host Controller > ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7 > ohci_hcd 0000:00:16.0: irq 18, io mem 0xfe3ff000 > sda: sda1 sda2 > sd 0:0:0:0: [sda] Attached SCSI disk > usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb7: Product: OHCI Host Controller > usb usb7: Manufacturer: Linux 3.4.0-rc4-00395-g87b5d90-dirty ohci_hcd > usb usb7: SerialNumber: 0000:00:16.0 > firewire_core 0000:05:00.0: created device fw0: GUID 001e8c0000de9136, S400 > hub 7-0:1.0: USB hub found > hub 7-0:1.0: 4 ports detected > xen_map_pirq_gsi: returning irq 50 for gsi 50 > Already setup the GSI :50 > xhci_hcd 0000:03:00.0: xHCI Host Controller > xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 8 > xhci_hcd 0000:03:00.0: irq 50, io mem 0xfe5fe000 > usb 1-1: New USB device found, idVendor=0424, idProduct=2504 > usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 > usb usb8: New USB device found, idVendor=1d6b, idProduct=0002 > usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb8: Product: xHCI Host Controller > hub 1-1:1.0: USB hub found > usb usb8: Manufacturer: Linux 3.4.0-rc4-00395-g87b5d90-dirty xhci_hcd > usb usb8: SerialNumber: 0000:03:00.0 > hub 1-1:1.0: 4 ports detected > hub 8-0:1.0: USB hub found > hub 8-0:1.0: 2 ports detected > xhci_hcd 0000:03:00.0: xHCI Host Controller > xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 9 > usb usb9: New USB device found, idVendor=1d6b, idProduct=0003 > usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb9: Product: xHCI Host Controller > usb usb9: Manufacturer: Linux 3.4.0-rc4-00395-g87b5d90-dirty xhci_hcd > usb usb9: SerialNumber: 0000:03:00.0 > hub 9-0:1.0: USB hub found > hub 9-0:1.0: 2 ports detected > usbcore: registered new interface driver usblp > usbcore: registered new interface driver uas > Initializing USB Mass Storage driver... > usbcore: registered new interface driver usb-storage > USB Mass Storage support registered. > usbcore: registered new interface driver libusual > usbcore: registered new interface driver ums_eneub6250 > i8042: PNP: No PS/2 controller found. Probing ports directly. > serio: i8042 KBD port at 0x60,0x64 irq 1 > serio: i8042 AUX port at 0x60,0x64 irq 12 > mousedev: PS/2 mouse device common for all mice > input: PC Speaker as /devices/platform/pcspkr/input/input2 > rtc_cmos 00:04: RTC can wake from S4 > rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 > rtc0: alarms up to one month, y3k, 114 bytes nvram > i2c /dev entries driver > ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with > Region \_SB_.PCI0.SBRG.ASOC.SMRG 1 (20120320/utaddress-251) > ACPI: If an ACPI driver is available for this device, you should use it > instead of the native driver > ATK0110 ATK0110:00: EC enabled > sp5100_tco: SP5100 TCO WatchDog Timer Driver v0.01 > sp5100_tco: mmio address 0xb8fe00 already in use > it87_wdt: Chip IT8721 revision 1 initialized. timeout=60 sec (nowayout=0 > testmode=0 exclusive=1 nogameport=0) > xen_wdt: Xen WatchDog Timer Driver v0.01 > xen_wdt: cannot register miscdev on minor=130 (-16) > wdt: probe of wdt failed with error -16 > device-mapper: uevent: version 1.0.3 > device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: > dm-devel@xxxxxxxxxx > EDAC MC: Ver: 2.1.0 > AMD64 EDAC driver v3.4.0 > EDAC amd64: DRAM ECC disabled. > EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not > load. > Either enable ECC checking or force module loading by setting > 'ecc_enable_override'. > (Note that use of the override may cause unknown side effects.) > usbcore: registered new interface driver usbhid > usbhid: USB HID core driver > TCP: cubic registered > NET: Registered protocol family 17 > rtc_cmos 00:04: setting system clock to 2012-05-07 11:19:10 UTC (1336389550) > powernow-k8: Found 1 AMD Phenom(tm) II X6 1075T Processor (6 cpu cores) > (version 2.20.00) > powernow-k8: Core Performance Boosting: on. > Freeing unused kernel memory: 532k freed > Loading, please wait... > udev[1078]: starting version 164 > usb 4-2: new full-speed USB device number 2 using ohci_hcd > usb 4-2: New USB device found, idVendor=041e, idProduct=30dc > usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 > usb 4-2: Product: Sound Blaster Tactic(3D) Alpha > usb 4-2: Manufacturer: Creative Technology Ltd > usb 4-2: SerialNumber: 00023162 > input: Creative Technology Ltd Sound Blaster Tactic(3D) Alpha as > /devices/pci0000:00/0000:00:12.0/usb4/4-2/4-2:1.3/input/input3 > generic-usb 0003:041E:30DC.0001: input,hiddev0: USB HID v1.00 Device > [Creative Technology Ltd Sound Blaster Tactic(3D) Alpha] on > usb-0000:00:12.0-2/input3 > usb 1-1.1: new full-speed USB device number 4 using ehci_hcd > Begin: Loading essential drivers ... done. > Begin: Running /scripts/init-premount ... done. > Begin: Mounting root file system ... Begin: Running /scripts/local-top ... > usb 1-1.1: New USB device found, idVendor=1532, idProduct=0013 > usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 > usb 1-1.1: Product: Razer Orochi > usb 1-1.1: Manufacturer: Razer > input: Razer Razer Orochi as > /devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1.1/1-1.1:1.0/input/input4 > generic-usb 0003:1532:0013.0002: input: USB HID v1.11 Mouse [Razer Razer > Orochi] on usb-0000:00:12.2-1.1/input0 > input: Razer Razer Orochi as > /devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1.1/1-1.1:1.1/input/input5 > generic-usb 0003:1532:0013.0003: input: USB HID v1.11 Keyboard [Razer Razer > Orochi] on usb-0000:00:12.2-1.1/input1 > done. > Begin: Running /scripts/local-premount ... done. > usb 1-1.2: new low-speed USB device number 5 using ehci_hcd > EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) > Begin: Running /scripts/local-bottom ... done. > done. > Begin: Running /scripts/init-bottom ... done. > usb 1-1.2: New USB device found, idVendor=04f2, idProduct=0403 > usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 > usb 1-1.2: Product: USB Keyboard > usb 1-1.2: Manufacturer: Chicony > input: Chicony USB Keyboard as > /devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1.2/1-1.2:1.0/input/input6 > generic-usb 0003:04F2:0403.0004: input: USB HID v1.11 Keyboard [Chicony USB > Keyboard] on usb-0000:00:12.2-1.2/input0 > INIT: version 2.88 booting > input: Chicony USB Keyboard as > /devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1.2/1-1.2:1.1/input/input7 > generic-usb 0003:04F2:0403.0005: input,hiddev0: USB HID v1.11 Device [Chicony > USB Keyboard] on usb-0000:00:12.2-1.2/input1 > Using makefile-style concurrent boot in runlevel S.net firewire0: I > Pv4 over IEEE 1394 on card 0000:05:00.0 > firewire_core 0000:05:00.0: refreshed device fw0 > Files under mount point '/lib/init/rw' will be hidden. ... (warning). > Files under mount point '/var/run' will be hidden. ... (warning). > Files under mount point '/var/lock' will be hidden. ... (warning). > Starting the hotplug events dispatcher: udevdudev[1302]: starting version 164 > . > Synthesizing the initial hotplug events...done. > Waiting for /dev to be fully populated...done. > Setting hostname to 'xen'...done. > Setting preliminary keymap...done. > Activating swap:. > EXT4-fs (dm-0): re-mounted. Opts: (null) > Will now check root file system:fsck from util-linux-ng 2.17.2 > [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a -C0 /dev/mapper/lemrouch-xen > /dev/mapper/lemrouch-xen: clean, 176617/1310720 files, 1280562/5242880 blocks > . > EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro > Loading kernel module firewire-sbp2. > Loading kernel module loop. > Cleaning up ifupdown.... > Setting up networking.... > Setting up LVM Volume Groups Reading all physical volumes. This may take a > while... > Found volume group "lemrouch" using metadata type lvm2 > 4 logical volume(s) in volume group "lemrouch" now active > . > Will now activate lvm and md swap:done. > Will now check all file systems. > fsck from util-linux-ng 2.17.2 > Checking all file systems. > Done checking file systems. A log is being saved in /var/log/fsck/checkfs if > that location is writable.. > Will now mount local filesystems:EXT4-fs (sda1): warning: mounting unchecked > fs, running e2fsck is recommended > EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) > . > Will now activate swapfile swap:done. > Cleaning up temporary files...Cleaning /tmp...done. > . > Checking minimum space in /tmp...done. > Setting kernel variables ... /etc/sysctl.conf...done. > Initializing random number generator...done. > Setting up X server socket directory /tmp/.X11-unix.... > Setting up ICE socket directory /tmp/.ICE-unix.... > Configuring network interfaces...device eth0 entered promiscuous mode > sky2 0000:04:00.0: eth0: enabling interface > done. > Cleaning up temporary files.... > Starting filesystem in userspace: fuse. > Setting console screen modes. > cannot (un)set powersave mode > Skipping font and keymap setup (handled by console-setup). > Setting up console font and keymap...done. > Setting sensors limits. > INIT: Entering runlevel: 3 > Using makefile-style concurrent boot in runlevel 3. > Not starting fancontrol; run pwmconfig first. ... (warning). > acpid: starting up with netlink and the input layer > > acpid: 1 rule loaded > > acpid: waiting for events: event logging is off > > Starting ACPI services.... > Starting system message bus: dbus. > sshd (2084): /proc/2084/oom_adj is deprecated, please use > /proc/2084/oom_score_adj instead. > Starting the Winbind daemon: winbind. > Starting OpenBSD Secure Shell server: sshd. > Starting domain name service...: bind9. > Starting oxenstored... > Setting domain 0 name... > Starting xenconsoled... > Starting Samba daemons: nmbd smbd. > Starting periodic command scheduler: cron. > Starting Postfix Mail Transport Agent: postfix. > BLKTAPCTRL[2253]: blktapctrl.c:792: blktapctrl: v1.0.0 > > BLKTAPCTRL[2253]: blktapctrl.c:794: Found driver: [raw image (aio)] > > BLKTAPCTRL[2253]: blktapctrl.c:794: Found driver: [raw image (sync)] > > BLKTAPCTRL[2253]: blktapctrl.c:794: Found driver: [vmware image (vmdk)] > > BLKTAPCTRL[2253]: blktapctrl.c:794: Found driver: [ramdisk image (ram)] > > BLKTAPCTRL[2253]: blktapctrl.c:794: Found driver: [qcow disk (qcow)] > > BLKTAPCTRL[2253]: blktapctrl.c:794: Found driver: [qcow2 disk (qcow2)] > > BLKTAPCTRL[2253]: blktapctrl_linux.c:86: blktap0 open failed > > BLKTAPCTRL[2253]: blktapctrl.c:861: couldn't open blktap interface > > BLKTAPCTRL[2253]: blktapctrl.c:924: Unable to start blktapctrl > > sky2 0000:04:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control > both > br0: port 1(eth0) entered forwarding state > br0: port 1(eth0) entered forwarding state > Starting S.M.A.R.T. daemon: smartd. > br0: port 1(eth0) entered forwarding state > Running local boot scripts (/etc/rc.local)(XEN) PCI remove device 0000:00:12.2 > acpid: input device has been disconnected > > acpid: input device has been disconnected > > acpid: input device has been disconnected > > (XEN) PCI remove device 0000:00:13.2 > (XEN) PCI remove device 0000:00:16.2 > (XEN) PCI add device 0000:00:12.2 > (XEN) PCI add device 0000:00:13.2 > (XEN) PCI add device 0000:00:16.2 > . > acpid: input device has been disconnected > > acpid: input device has been disconnected > > (XEN) ioport_map:add: dom1 gport=3b0 mport=3b0 nr=c > (XEN) memory_map:add: dom1 gfn=a0 mfn=a0 nr=20 > (XEN) ioport_map:add: dom1 gport=3c0 mport=3c0 nr=3 > (XEN) ioport_map:add: dom1 gport=3c4 mport=3c4 nr=1c > (XEN) HVM1: HVM Loader > (XEN) HVM1: Detected Xen v4.2-unstable > (XEN) HVM1: Xenbus rings @0xfeffc000, event channel 8 > (XEN) HVM1: System requested ROMBIOS > (XEN) HVM1: CPU speed is 3010 MHz > (XEN) irq.c:270: Dom1 PCI link 0 changed 0 -> 5 > (XEN) HVM1: PCI-ISA link 0 routed to IRQ5 > (XEN) irq.c:270: Dom1 PCI link 1 changed 0 -> 10 > (XEN) HVM1: PCI-ISA link 1 routed to IRQ10 > (XEN) irq.c:270: Dom1 PCI link 2 changed 0 -> 11 > (XEN) HVM1: PCI-ISA link 2 routed to IRQ11 > (XEN) irq.c:270: Dom1 PCI link 3 changed 0 -> 5 > (XEN) HVM1: PCI-ISA link 3 routed to IRQ5 > (XEN) HVM1: pci dev 01:3 INTA->IRQ10 > (XEN) HVM1: pci dev 03:0 INTA->IRQ5 > (XEN) HVM1: pci dev 04:0 INTA->IRQ5 > (XEN) HVM1: pci dev 05:0 INTA->IRQ10 > (XEN) HVM1: pci dev 06:0 INTB->IRQ5 > (XEN) HVM1: pci dev 07:0 INTA->IRQ5 > (XEN) HVM1: pci dev 08:0 INTB->IRQ10 > (XEN) HVM1: pci dev 09:0 INTA->IRQ10 > (XEN) HVM1: pci dev 05:0 bar 10 size 10000000: e000000c > (XEN) memory_map:add: dom1 gfn=e0000 mfn=d0000 nr=10000 > (XEN) HVM1: pci dev 03:0 bar 14 size 01000000: f0000008 > (XEN) HVM1: pci dev 04:0 bar 10 size 00020000: f1000000 > (XEN) memory_map:add: dom1 gfn=f1020 mfn=fe9e0 nr=20 > (XEN) HVM1: pci dev 05:0 bar 18 size 00020000: f1020004 > (XEN) HVM1: pci dev 05:0 bar 30 size 00020000: f1040000 > (XEN) HVM1: pci dev 06:0 bar 10 size 00004000: f1060004 > (XEN) memory_map:add: dom1 gfn=f1060 mfn=fe9bc nr=4 > (XEN) HVM1: pci dev 09:0 bar 10 size 00004000: f1064004 > (XEN) memory_map:add: dom1 gfn=f1064 mfn=fe3f8 nr=4 > (XEN) HVM1: pci dev 07:0 bar 10 size 00001000: f1068000 > (XEN) memory_map:add: dom1 gfn=f1068 mfn=fe3f7 nr=1 > (XEN) HVM1: pci dev 08:0 bar 10 size 00001000: f1069000 > (XEN) memory_map:add: dom1 gfn=f1069 mfn=f0000 nr=1 > (XEN) HVM1: pci dev 03:0 bar 10 size 00000100: 0000c001 > (XEN) HVM1: pci dev 05:0 bar 20 size 00000100: 0000c101 > (XEN) HVM1: pci dev 04:0 bar 14 size 00000040: 0000c201 > (XEN) HVM1: pci dev 01:1 bar 20 size 00000010: 0000c241 > (XEN) HVM1: Multiprocessor initialisation: > (XEN) HVM1: - CPU0 ... 48-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... > done. > (XEN) HVM1: - CPU1 ... 48-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... > done. > (XEN) HVM1: - CPU2 ... 48-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... > done. > (XEN) HVM1: - CPU3 ... 48-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... > done. > (XEN) HVM1: - CPU4 ... 48-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... > done. > (XEN) HVM1: - CPU5 ... 48-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... > done. > (XEN) HVM1: Testing HVM environment: > (XEN) HVM1: - REP INSB across page boundaries ... passed > (XEN) HVM1: - GS base MSRs and SWAPGS ... passed > (XEN) HVM1: Passed 2 of 2 tests > (XEN) HVM1: Writing SMBIOS tables ... > (XEN) HVM1: Loading ROMBIOS ... > (XEN) HVM1: 9660 bytes of ROMBIOS high-memory extensions: > (XEN) HVM1: Relocating to 0xfc001000-0xfc0035bc ... done > (XEN) HVM1: Creating MP tables ... > (XEN) HVM1: Loading VGABIOS of passthroughed gfx ... > (XEN) HVM1: Loading PCI Option ROM ... > (XEN) HVM1: - Manufacturer: http://ipxe.org > (XEN) HVM1: - Product name: iPXE > (XEN) HVM1: Option ROMs: > (XEN) HVM1: c0000-cffff: VGA BIOS > (XEN) HVM1: d0000-e0fff: Etherboot ROM > (XEN) HVM1: Loading ACPI ... > (XEN) HVM1: vm86 TSS at fc00f700 > (XEN) HVM1: BIOS map: > (XEN) HVM1: f0000-fffff: Main BIOS > (XEN) HVM1: E820 table: > (XEN) HVM1: [00]: 00000000:00000000 - 00000000:0009e000: RAM > (XEN) HVM1: [01]: 00000000:0009e000 - 00000000:000a0000: RESERVED > (XEN) HVM1: HOLE: 00000000:000a0000 - 00000000:000e0000 > (XEN) HVM1: [02]: 00000000:000e0000 - 00000000:00100000: RESERVED > (XEN) HVM1: [03]: 00000000:00100000 - 00000000:e0000000: RAM > (XEN) HVM1: HOLE: 00000000:e0000000 - 00000000:fc000000 > (XEN) HVM1: [04]: 00000000:fc000000 - 00000001:00000000: RESERVED > (XEN) HVM1: [05]: 00000001:00000000 - 00000001:20000000: RAM > (XEN) HVM1: Invoking ROMBIOS ... > (XEN) HVM1: $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $ > (XEN) HVM1: Bochs BIOS - build: 06/23/99 > (XEN) HVM1: $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $ > (XEN) HVM1: Options: apmbios pcibios eltorito PMM > (XEN) HVM1: > (XEN) HVM1: ata0-0: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 > (XEN) HVM1: ata0 master: QEMU HARDDISK ATA-7 Hard-Disk (20480 MBytes) > (XEN) HVM1: ata0-1: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 > (XEN) HVM1: ata0 slave: QEMU HARDDISK ATA-7 Hard-Disk (51200 MBytes) > (XEN) HVM1: > (XEN) HVM1: > (XEN) HVM1: > (XEN) HVM1: Press F12 for boot menu. > (XEN) HVM1: > (XEN) HVM1: Booting from Hard Disk... > (XEN) HVM1: Booting from 0000:7c00 > (XEN) irq.c:270: Dom1 PCI link 0 changed 5 -> 0 > (XEN) irq.c:270: Dom1 PCI link 1 changed 10 -> 0 > (XEN) irq.c:270: Dom1 PCI link 2 changed 11 -> 0 > (XEN) irq.c:270: Dom1 PCI link 3 changed 5 -> 0 > (XEN) memory_map:remove: dom1 gfn=e0000 mfn=d0000 nr=10000 > (XEN) memory_map:remove: dom1 gfn=f1020 mfn=fe9e0 nr=20 > (XEN) memory_map:add: dom1 gfn=e0000 mfn=d0000 nr=10000 > (XEN) memory_map:add: dom1 gfn=f1020 mfn=fe9e0 nr=20 > (XEN) memory_map:remove: dom1 gfn=f1060 mfn=fe9bc nr=4 > (XEN) memory_map:add: dom1 gfn=f1060 mfn=fe9bc nr=4 > (XEN) memory_map:remove: dom1 gfn=f1068 mfn=fe3f7 nr=1 > (XEN) memory_map:add: dom1 gfn=f1068 mfn=fe3f7 nr=1 > (XEN) memory_map:remove: dom1 gfn=f1069 mfn=f0000 nr=1 > (XEN) memory_map:add: dom1 gfn=f1069 mfn=f0000 nr=1 > (XEN) memory_map:remove: dom1 gfn=f1064 mfn=fe3f8 nr=4 > (XEN) memory_map:add: dom1 gfn=f1064 mfn=fe3f8 nr=4 > (XEN) grant_table.c:1174:d1 Expanding dom (1) grant table from (4) to (32) > frames. > (XEN) irq.c:350: Dom1 callback via changed to GSI 28 > (XEN) Domain 0 crashed: rebooting machine in 5 seconds. > _______________________________________________ > Xen-devel mailing list > Xen-devel@xxxxxxxxxxxxx > http://lists.xen.org/xen-devel _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxx http://lists.xen.org/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |